华为9300 、华三5500 传输网Qinq配置_第1张图片


如上图,要将CE-c的vlan 20 通过P网络传输到CE-a ,大大网中使用vlan为1000

只要在PE端配置相关数据即可,CE端无需操作可以是hybird 或者trunk都可以


华三5500配置

interface Ten-GigabitEthernet1/2/1

 port link-mode bridge

 description nbdx

 port link-type hybrid

 undo port hybrid vlan 1

 port hybrid vlan 77 88 91 to 93 100 111 to 112 122 260 tagged

 port hybrid vlan 1000 untagged

 qinq enable

 qinq vid 1000

  raw-vlan-id inbound  20 99 2403


华为9300配置


interface Eth-Trunk60

 undo port hybrid vlan 1

 port hybrid tagged vlan 99 244 to 246 251 271 273 986 1002 4001

 port hybrid untagged vlan 1000

 port vlan-stacking vlan 20 stack-vlan 1000

port vlan-stacking vlan 99 stack-vlan 1000

 port vlan-stacking vlan 2403 stack-vlan 1000