项目中经常有些任务需要异步(提交到线程池中)去执行，而主线程往往需要知道异步执行产生的结果，这时我们要怎么做呢？用runnable是无法实现的，我们需要用callable实现。
Callable接口
Callable接口Runable接口可谓是兄弟关系，只不过Callable是带返回值的。
public interface Callable
{ /**
* Computes a result, or throws an exception if unable to do so.
*
* @return computed result
* @throws Exception if unable to compute a result
*/
V call() throws Exception;
}
Future 接口
接口函数及含义 ：public interface Future
boolean cancel(boolean mayInterruptIfRunning)
取消当前执行的任务，如果已经执行完毕或者已经被取消/由于某种原因不能被取消 则取消任务失败。
参数mayInterruptIfRunning： 当任务正在执行，如果参数为true ，则尝试中断任务，否则让任务继续执行知道结束。
boolean isCancelled()
Returns {@code true} if this task was cancelled before it completed
* normally.
boolean isDone();
/**
* Returns {@code true} if this task completed.
*
* Completion may be due to normal termination, an exception, or
* cancellation -- in all of these cases, this method will return
* {@code true}.
*
* @return {@code true} if this task completed
*/
V get() throws InterruptedException, ExecutionException;
/**
* Waits if necessary for the computation to complete, and then
* retrieves its result.
*
* @return the computed result
* @throws CancellationException if the computation was cancelled
* @throws ExecutionException if the computation threw an
* exception
* @throws InterruptedException if the current thread was interrupted
* while waiting
*/
由注释可以看出，当没有执行完成时，需要等待任务执行完成了才会将计算结果返回。
V get(long timeout, TimeUnit unit)
throws InterruptedException, ExecutionException, TimeoutException;
Waits if necessary for at most the given time for the computation
* to complete, and then retrieves its result, if available.
如果等待的时间超过设置的时间则会报 TimeoutException异常
FutureTask
public class FutureTask
由定义可以看出它实现了RunnableFuture接口，那么这个接口又是什么呢？看下面的接口定义，其实很简单
public interface RunnableFuture
extends Runnable, Future { /**
* Sets this Future to the result of its computation
* unless it has been cancelled.
*/
void run();
}
再回到FutureTask,它其实就是实现了Runnable和Future接口，FutureTask的执行是 状态转换的过程，源码中有七种状态如下：
* Possible state transitions:
* NEW -> COMPLETING -> NORMAL
* NEW -> COMPLETING -> EXCEPTIONAL
* NEW -> CANCELLED
* NEW -> INTERRUPTING -> INTERRUPTED
*/
private volatile int state;
private static final int NEW = 0;
private static final int COMPLETING = 1;
private static final int NORMAL = 2;
private static final int EXCEPTIONAL = 3;
private static final int CANCELLED = 4;
private static final int INTERRUPTING = 5;
private static final int INTERRUPTED = 6;
当FutureTask刚刚被创建时，它的状态是NEW，其它状态查看源码。
其它成员变量：
/** The underlying callable; nulled out after running */
private Callable
callable; /** The result to return or exception to throw from get() */
private Object outcome; // non-volatile, protected by state reads/writes
/** The thread running the callable; CASed during run() */
private volatile Thread runner;
/** Treiber stack of waiting threads */
private volatile WaitNode waiters;
callable是待执行的任务，FutureTask 的 run（）函数中执行callable中的任务。
outcome ： 是callable的执行结果，当正常执行完成后会将结果set到outcome中
runner：是执行callable 的线程
WaitNode : 是的受阻塞的线程链表，当cancel一个任务后，阻塞的线程会被唤醒。
构造函数：
public FutureTask(Callable
callable) { if (callable == null)
throw new NullPointerException();
this.callable = callable;
this.state = NEW; // ensure visibility of callable
}
public FutureTask(Runnable runnable, V result) {
this.callable = Executors.callable(runnable, result);
this.state = NEW; // ensure visibility of callable
}
从构造函数可以看出，不光可以通过callable构造FutureTask还可以通过Runnable接口转化为callable来构造。关键函数为黄色标记部分，Executors中的实现源码如下：
/**
* A callable that runs given task and returns given result.
*/
private static final class RunnableAdapter
implements Callable { private final Runnable task;
private final T result;
RunnableAdapter(Runnable task, T result) {
this.task = task;
this.result = result;
}
public T call() {
task.run();
return result;
}
}
这里面不懂result到底有什么意义，明明就是预先设置好的。
其它具体的方法说明这里不再细说，里面用到了很多sun.misc.Unsafe中的方法以及其他SDK底层接口，后续有时间再学习。下面贴出了整个源码及说明
public class FutureTask
implements RunnableFuture { /*
* Revision notes: This differs from previous versions of this
* class that relied on AbstractQueuedSynchronizer, mainly to
* avoid surprising users about retaining interrupt status during
* cancellation races. Sync control in the current design relies
* on a "state" field updated via CAS to track completion, along
* with a simple Treiber stack to hold waiting threads.
*
* Style note: As usual, we bypass overhead of using
* AtomicXFieldUpdaters and instead directly use Unsafe intrinsics.
*/
/**
* The run state of this task, initially NEW. The run state
* transitions to a terminal state only in methods set,
* setException, and cancel. During completion, state may take on
* transient values of COMPLETING (while outcome is being set) or
* INTERRUPTING (only while interrupting the runner to satisfy a
* cancel(true)). Transitions from these intermediate to final
* states use cheaper ordered/lazy writes because values are unique
* and cannot be further modified.
*
* Possible state transitions:
* NEW -> COMPLETING -> NORMAL
* NEW -> COMPLETING -> EXCEPTIONAL
* NEW -> CANCELLED
* NEW -> INTERRUPTING -> INTERRUPTED
*/
private volatile int state;
private static final int NEW = 0;
private static final int COMPLETING = 1;
private static final int NORMAL = 2;
private static final int EXCEPTIONAL = 3;
private static final int CANCELLED = 4;
private static final int INTERRUPTING = 5;
private static final int INTERRUPTED = 6;
/** The underlying callable; nulled out after running */
private Callable
callable; /** 用来存储任务执行结果或者异常对象,根据任务state在get时候选择返回执行结果还是抛出异常 */
private Object outcome; // non-volatile, protected by state reads/writes
/** 当前运行Run方法的线程 */
private volatile Thread runner;
/** Treiber stack of waiting threads */
private volatile WaitNode waiters;
/**
* Returns result or throws exception for completed task.
*
* @param s completed state value
*/
@SuppressWarnings("unchecked")
private V report(int s) throws ExecutionException {
Object x = outcome;
if (s == NORMAL)
return (V)x;
if (s >= CANCELLED)
throw new CancellationException();
throw new ExecutionException((Throwable)x);
}
/**
* Creates a {@code FutureTask} that will, upon running, execute the
* given {@code Callable}.
*
* @param callable the callable task
* @throws NullPointerException if the callable is null
*/
public FutureTask(Callable
callable) { if (callable == null)
throw new NullPointerException();
this.callable = callable;
this.state = NEW; // ensure visibility of callable
}
/**
* Creates a {@code FutureTask} that will, upon running, execute the
* given {@code Runnable}, and arrange that {@code get} will return the
* given result on successful completion.
*
* @param runnable the runnable task
* @param result the result to return on successful completion. If
* you don't need a particular result, consider using
* constructions of the form:
* {@code Future f = new FutureTask
(runnable, null)} * @throws NullPointerException if the runnable is null
*/
public FutureTask(Runnable runnable, V result) {
this.callable = Executors.callable(runnable, result);
this.state = NEW; // ensure visibility of callable
}
//判断任务是否已取消(异常中断、取消等)
public boolean isCancelled() {
return state >= CANCELLED;
}
/**
判断任务是否已结束（取消、异常、完成、NORMAL都等于结束）
**
public boolean isDone() {
return state != NEW;
}
/**
mayInterruptIfRunning用来决定任务的状态。
true : 任务状态= INTERRUPTING = 5。如果任务已经运行，则强行中断。如果任务未运行，那么则不会再运行
false：CANCELLED = 4。如果任务已经运行，则允许运行完成（但不能通过get获取结果）。如果任务未运行，那么则不会再运行
**/
public boolean cancel(boolean mayInterruptIfRunning) {
if (state != NEW)
return false;
if (mayInterruptIfRunning) {
if (!UNSAFE.compareAndSwapInt(this, stateOffset, NEW, INTERRUPTING))
return false;
Thread t = runner;
if (t != null)
t.interrupt();
UNSAFE.putOrderedInt(this, stateOffset, INTERRUPTED); // final state
}
else if (!UNSAFE.compareAndSwapInt(this, stateOffset, NEW, CANCELLED))
return false;
finishCompletion();
return true;
}
/**
* @throws CancellationException {@inheritDoc}
*/
public V get() throws InterruptedException, ExecutionException {
int s = state;
//如果任务未彻底完成，那么则阻塞直至任务完成后唤醒该线程
if (s <= COMPLETING)
s = awaitDone(false, 0L);
return report(s);
}
/**
* @throws CancellationException {@inheritDoc}
*/
public V get(long timeout, TimeUnit unit)
throws InterruptedException, ExecutionException, TimeoutException {
if (unit == null)
throw new NullPointerException();
int s = state;
if (s <= COMPLETING &&
(s = awaitDone(true, unit.toNanos(timeout))) <= COMPLETING)
throw new TimeoutException();
return report(s);
}
/**
* Protected method invoked when this task transitions to state
* {@code isDone} (whether normally or via cancellation). The
* default implementation does nothing. Subclasses may override
* this method to invoke completion callbacks or perform
* bookkeeping. Note that you can query status inside the
* implementation of this method to determine whether this task
* has been cancelled.
*/
protected void done() { }
/**
该方法在FutureTask里只有run方法在任务完成后调用。
主要保存任务执行结果到成员变量outcome 中，和切换任务执行状态。
由该方法可以得知：
COMPLETING ： 任务已执行完成（也可能是异常完成），但还未设置结果到成员变量outcome中，也意味着还不能get
NORMAL ： 任务彻底执行完成
**/
protected void set(V v) {
if (UNSAFE.compareAndSwapInt(this, stateOffset, NEW, COMPLETING)) {
outcome = v;
UNSAFE.putOrderedInt(this, stateOffset, NORMAL); // final state
finishCompletion();
}
}
/**
* Causes this future to report an {@link ExecutionException}
* with the given throwable as its cause, unless this future has
* already been set or has been cancelled.
*
*
This method is invoked internally by the {@link #run} method
* upon failure of the computation.
*
* @param t the cause of failure
*/
protected void setException(Throwable t) {
if (UNSAFE.compareAndSwapInt(this, stateOffset, NEW, COMPLETING)) {
outcome = t;
UNSAFE.putOrderedInt(this, stateOffset, EXCEPTIONAL); // final state
finishCompletion();
}
}
/**
由于实现了Runnable接口的缘故，该方法可由执行线程所调用。
**/
public void run() {
//只有当任务状态=new时才被运行继续执行
if (state != NEW ||
!UNSAFE.compareAndSwapObject(this, runnerOffset,
null, Thread.currentThread()))
return;
try {
Callable
c = callable; if (c != null && state == NEW) {
V result;
boolean ran;
try {
//调用Callable的Call方法
result = c.call();
ran = true;
} catch (Throwable ex) {
result = null;
ran = false;
setException(ex);
}
if (ran)
set(result);
}
} finally {
// runner must be non-null until state is settled to
// prevent concurrent calls to run()
runner = null;
// state must be re-read after nulling runner to prevent
// leaked interrupts
int s = state;
if (s >= INTERRUPTING)
handlePossibleCancellationInterrupt(s);
}
}
/**
如果该任务在执行过程中不被取消或者异常结束，那么该方法不记录任务的执行结果，且不修改任务执行状态。
所以该方法可以重复执行N次。不过不能直接调用，因为是protected权限。
**/
protected boolean runAndReset() {
if (state != NEW ||
!UNSAFE.compareAndSwapObject(this, runnerOffset,
null, Thread.currentThread()))
return false;
boolean ran = false;
int s = state;
try {
Callable
c = callable; if (c != null && s == NEW) {
try {
c.call(); // don't set result
ran = true;
} catch (Throwable ex) {
setException(ex);
}
}
} finally {
// runner must be non-null until state is settled to
// prevent concurrent calls to run()
runner = null;
// state must be re-read after nulling runner to prevent
// leaked interrupts
s = state;
if (s >= INTERRUPTING)
handlePossibleCancellationInterrupt(s);
}
return ran && s == NEW;
}
/**
* Ensures that any interrupt from a possible cancel(true) is only
* delivered to a task while in run or runAndReset.
*/
private void handlePossibleCancellationInterrupt(int s) {
// It is possible for our interrupter to stall before getting a
// chance to interrupt us. Let's spin-wait patiently.
if (s == INTERRUPTING)
while (state == INTERRUPTING)
Thread.yield(); // wait out pending interrupt
// assert state == INTERRUPTED;
// We want to clear any interrupt we may have received from
// cancel(true). However, it is permissible to use interrupts
// as an independent mechanism for a task to communicate with
// its caller, and there is no way to clear only the
// cancellation interrupt.
//
// Thread.interrupted();
}
/**
* Simple linked list nodes to record waiting threads in a Treiber
* stack. See other classes such as Phaser and SynchronousQueue
* for more detailed explanation.
*/
static final class WaitNode {
volatile Thread thread;
volatile WaitNode next;
WaitNode() { thread = Thread.currentThread(); }
}
/**
该方法在任务完成（包括异常完成、取消）后调用。删除所有正在get获取等待的节点且唤醒节点的线程。和调用done方法和置空callable.
**/
private void finishCompletion() {
// assert state > COMPLETING;
for (WaitNode q; (q = waiters) != null;) {
if (UNSAFE.compareAndSwapObject(this, waitersOffset, q, null)) {
for (;;) {
Thread t = q.thread;
if (t != null) {
q.thread = null;
LockSupport.unpark(t);
}
WaitNode next = q.next;
if (next == null)
break;
q.next = null; // unlink to help gc
q = next;
}
break;
}
}
done();
callable = null; // to reduce footprint
}
/**
阻塞等待任务执行完成（中断、正常完成、超时）
**/
private int awaitDone(boolean timed, long nanos)
throws InterruptedException {
final long deadline = timed ? System.nanoTime() + nanos : 0L;
WaitNode q = null;
boolean queued = false;
for (;;) {
/**
这里的if else的顺序也是有讲究的。
1.先判断线程是否中断，中断则从队列中移除(也可能该线程不存在于队列中)
2.判断当前任务是否执行完成，执行完成则不再阻塞，直接返回。
3.如果任务状态=COMPLETING，证明该任务处于已执行完成，正在切换任务执行状态，CPU让出片刻即可
4.q==null，则证明还未创建节点，则创建节点
5.q节点入队
6和7.阻塞
**/
if (Thread.interrupted()) {
removeWaiter(q);
throw new InterruptedException();
}
int s = state;
if (s > COMPLETING) {
if (q != null)
q.thread = null;
return s;
}
else if (s == COMPLETING) // cannot time out yet
Thread.yield();
else if (q == null)
q = new WaitNode();
else if (!queued)
queued = UNSAFE.compareAndSwapObject(this, waitersOffset,
q.next = waiters, q);
else if (timed) {
nanos = deadline - System.nanoTime();
if (nanos <= 0L) {
removeWaiter(q);
return state;
}
LockSupport.parkNanos(this, nanos);
}
else
LockSupport.park(this);
}
}
/**
* Tries to unlink a timed-out or interrupted wait node to avoid
* accumulating garbage. Internal nodes are simply unspliced
* without CAS since it is harmless if they are traversed anyway
* by releasers. To avoid effects of unsplicing from already
* removed nodes, the list is retraversed in case of an apparent
* race. This is slow when there are a lot of nodes, but we don't
* expect lists to be long enough to outweigh higher-overhead
* schemes.
*/
private void removeWaiter(WaitNode node) {
if (node != null) {
node.thread = null;
retry:
for (;;) { // restart on removeWaiter race
for (WaitNode pred = null, q = waiters, s; q != null; q = s) {
s = q.next;
if (q.thread != null)
pred = q;
else if (pred != null) {
pred.next = s;
if (pred.thread == null) // check for race
continue retry;
}
else if (!UNSAFE.compareAndSwapObject(this, waitersOffset,
q, s))
continue retry;
}
break;
}
}
}
// Unsafe mechanics
private static final sun.misc.Unsafe UNSAFE;
private static final long stateOffset;
private static final long runnerOffset;
private static final long waitersOffset;
static {
try {
UNSAFE = sun.misc.Unsafe.getUnsafe();
Class k = FutureTask.class;
stateOffset = UNSAFE.objectFieldOffset
(k.getDeclaredField("state"));
runnerOffset = UNSAFE.objectFieldOffset
(k.getDeclaredField("runner"));
waitersOffset = UNSAFE.objectFieldOffset
(k.getDeclaredField("waiters"));
} catch (Exception e) {
throw new Error(e);
}
}
}
FutureTask简单应用：
public class FutureMain {
public static void main(String[] args)
throws ExecutionException, InterruptedException {
//构造FutureTask
FutureTask
futureTask = new FutureTask (new CallableClass("xxx")); ExecutorService executorService = Executors.newFixedThreadPool(1);
//执行FutureTask，发送请求
//在这里开启线程进行RealData的call()执行
executorService.submit(futureTask);
System.out.println("请求完毕。。。");
try {
//这里可以进行其他额外的操作，这里用sleep代替其他业务的处理
Thread.sleep(200);
}catch (InterruptedException e) {
e.printStackTrace();
}
//获取call()方法的返回值
//如果此时call()方法没有执行完成，则依然会等待
System.out.println("真实数据:"+futureTask.get());
}
}