h3c vlan配置

1、基于端口的VLAN配置命令

[SWA]vlan 10 #创建VLAN

[SWA-vlan10]port Ethernet1/0/1 #向当前VLAN添加端口

[SWA]vlan 20 #创建VLAN

[SWA-vlan20]port Ethernet1/0/2 #向当前VLAN添加端口

[SWA]interface Ethernet1/0/24 #进入端口

[SWA-Ethernet1/0/24]port link-type trunk #配置端口的链路类型为Trunk类型

[SWA-Ethernet1/0/24]port trunk permit vlan 10 20 #允许指定的VLAN通过当前Trunk端口

2、基于协议的VLAN配置命令
[SWA]vlan 10 #创建VLAN

[SWA-vlan10]protocol-vlan ipv4 #指定协议模板

[SWA]interface Ethernet 1/0/1 #进入端口

配置Hybrid端口与基于协议的VLAN关联
[SWA-Ethernet1/0/1]port link-type hybrid
[SWA-Ethernet1/0/1]port hybrid vlan 10 20 untagged
[SWA-Ethernet1/0/1]port hybrid protocol-vlan vlan 10 0

3、基于IP子网的VLAN配置命令
[SWA]vlan 10 #创建VLAN

[SWA-vlan10]ip-subnet-vlan ip 10.10.10.0 255.255.255.0 #配置当前VLAN与指定的IP子网关联

[SWA]interface Ethernet 1/0/1
[SWA-Ethernet1/0/1]port link-type hybrid
[SWA-Ethernet1/0/1]port hybrid vlan 10 20 untagged
[SWA-Ethernet1/0/1]port hybrid ip-subnet-vlan vlan 10 #配置当前端口与基于IP子网的VLAN关联

4、配置MVRP

[SWA]vlan 10

[SWA]mvrp global enable 开启全局MVRP功能
[SWA]interface Ethernet 1/0/24
[SWA-Ethernet1/0/24]port link-type trunk
[SWA-Ethernet1/0/24]port trunk permit vlan all

[SWA-Ethernet1/0/24]mvrp enable 开启端口的MVRP功能

[SWA-Ethernet1/0/24]mvrp registration fixed 配置MVRP注册模式

**配置Periodic定时器、Join定时器、Leave定时器和Leaveall定时器
[Switch-Ethernet1/0/1] mrp timer {periodic | join | leave | leaveall} timer-value