a
| 函数 | 说明 |
|---|---|
| abs | 绝对值 |
| acos | 反余弦 |
| acosh | 反双曲余弦 |
| addcslashes | 以 C 语言风格使用反斜线转义字符串中的字符 |
| addslashes | 使用反斜线引用字符串 |
| apache_child_terminate | 在本次请求结束后终止 apache 子进程 |
| apache_getenv | 获取 Apache subprocess_env 变量 |
| apache_get_modules | 获得已加载的Apache模块列表 |
| apache_get_version | 获得Apache版本信息 |
| apache_lookup_uri | 对指定的 URI 执行部分请求并返回所有有关信息 |
| apache_note | 取得或设置 apache 请求记录 |
| apache_request_headers | 获取全部 HTTP 请求头信息 |
| apache_reset_timeout | 重置 Apache 写入计时器 |
| apache_response_headers | 获得全部 HTTP 响应头信息 |
| apache_setenv | 设置 Apache 子进程环境变量 |
| apcu_add | Cache a new variable in the data store |
| apcu_cache_info | Retrieves cached information from APCu’s data store |
| apcu_cas | Updates an old value with a new value |
| apcu_clear_cache | Clears the APCu cache |
| apcu_dec | Decrease a stored number |
| apcu_delete | Removes a stored variable from the cache |
| apcu_entry | Atomically fetch or generate a cache entry |
| apcu_exists | Checks if entry exists |
| apcu_fetch | Fetch a stored variable from the cache |
| apcu_inc | Increase a stored number |
| apcu_sma_info | Retrieves APCu Shared Memory Allocation information |
| apcu_store | Cache a variable in the data store |
| apc_add | 缓存一个变量到数据存储 |
| apc_bin_dump | Get a binary dump of the given files and user variables |
| apc_bin_dumpfile | Output a binary dump of cached files and user variables to a file |
| apc_bin_load | Load a binary dump into the APC file/user cache |
| apc_bin_loadfile | Load a binary dump from a file into the APC file/user cache |
| apc_cache_info | Retrieves cached information from APC’s data store |
| apc_cas | 用新值更新旧值 |
| apc_clear_cache | 清除APC缓存 |
| apc_compile_file | Stores a file in the bytecode cache, bypassing all filters. |
| apc_dec | Decrease a stored number |
| apc_define_constants | Defines a set of constants for retrieval and mass-definition |
| apc_delete | 从用户缓存中删除某个变量 |
| apc_delete_file | Deletes files from the opcode cache |
| apc_exists | 检查APC中是否存在某个或者某些key |
| apc_fetch | 从缓存中取出存储的变量 |
| apc_inc | 递增一个储存的数字 |
| apc_load_constants | Loads a set of constants from the cache |
| apc_sma_info | Retrieves APC’s Shared Memory Allocation information |
| apc_store | Cache a variable in the data store |
| apd_breakpoint | Stops the interpreter and waits on a CR from the socket |
| apd_callstack | Returns the current call stack as an array |
| apd_clunk | Throw a warning and a callstack |
| apd_continue | Restarts the interpreter |
| apd_croak | Throw an error, a callstack and then exit |
| apd_dump_function_table | Outputs the current function table |
| apd_dump_persistent_resources | Return all persistent resources as an array |
| apd_dump_regular_resources | Return all current regular resources as an array |
| apd_echo | Echo to the debugging socket |
| apd_get_active_symbols | Get an array of the current variables names in the local scope |
| apd_set_pprof_trace | Starts the session debugging |
| apd_set_session | Changes or sets the current debugging level |
| apd_set_session_trace | Starts the session debugging |
| apd_set_session_trace_socket | Starts the remote session debugging |
| array | 新建一个数组 |
| array_change_key_case | 返回字符串键名全为小写或大写的数组 |
| array_chunk | 将一个数组分割成多个 |
| array_column | 返回数组中指定的一列 |
| array_combine | 创建一个数组，用一个数组的值作为其键名，另一个数组的值作为其值 |
| array_count_values | 统计数组中所有的值出现的次数 |
| array_diff | 计算数组的差集 |
| array_diff_assoc | 带索引检查计算数组的差集 |
| array_diff_key | 使用键名比较计算数组的差集 |
| array_diff_uassoc | 用用户提供的回调函数做索引检查来计算数组的差集 |
| array_diff_ukey | 用回调函数对键名比较计算数组的差集 |
| array_fill | 用给定的值填充数组 |
| array_fill_keys | 使用指定的键和值填充数组 |
| array_filter | 用回调函数过滤数组中的单元 |
| array_flip | 交换数组中的键和值 |
| array_intersect | 计算数组的交集 |
| array_intersect_assoc | 带索引检查计算数组的交集 |
| array_intersect_key | 使用键名比较计算数组的交集 |
| array_intersect_uassoc | 带索引检查计算数组的交集，用回调函数比较索引 |
| array_intersect_ukey | 用回调函数比较键名来计算数组的交集 |
| array_keys | 返回数组中部分的或所有的键名 |
| array_key_exists | 检查给定的键名或索引是否存在于数组中 |
| array_map | 将回调函数作用到给定数组的单元上 |
| array_merge | 合并一个或多个数组 |
| array_merge_recursive | 递归地合并一个或多个数组 |
| array_multisort | 对多个数组或多维数组进行排序 |
| array_pad | 用值将数组填补到指定长度 |
| array_pop | 将数组最后一个单元弹出（出栈） |
| array_product | 计算数组中所有值的乘积 |
| array_push | 将一个或多个单元压入数组的末尾（入栈） |
| array_rand | 从数组中随机取出一个或多个单元 |
| array_reduce | 用回调函数迭代地将数组简化为单一的值 |
| array_replace | 使用传递的数组替换第一个数组的元素 |
| array_replace_recursive | 使用传递的数组递归替换第一个数组的元素 |
| array_reverse | 返回一个单元顺序相反的数组 |
| array_search | 在数组中搜索给定的值，如果成功则返回相应的键名 |
| array_shift | 将数组开头的单元移出数组 |
| array_slice | 从数组中取出一段 |
| array_splice | 把数组中的一部分去掉并用其它值取代 |
| array_sum | 计算数组中所有值的和 |
| array_udiff | 用回调函数比较数据来计算数组的差集 |
| array_udiff_assoc | 带索引检查计算数组的差集，用回调函数比较数据 |
| array_udiff_uassoc | 带索引检查计算数组的差集，用回调函数比较数据和索引 |
| array_uintersect | 计算数组的交集，用回调函数比较数据 |
| array_uintersect_assoc | 带索引检查计算数组的交集，用回调函数比较数据 |
| array_uintersect_uassoc | 带索引检查计算数组的交集，用回调函数比较数据和索引 |
| array_unique | 移除数组中重复的值 |
| array_unshift | 在数组开头插入一个或多个单元 |
| array_values | 返回数组中所有的值 |
| array_walk | 使用用户自定义函数对数组中的每个元素做回调处理 |
| array_walk_recursive | 对数组中的每个成员递归地应用用户函数 |
| arsort | 对数组进行逆向排序并保持索引关系 |
| asin | 反正弦 |
| asinh | 反双曲正弦 |
| asort | 对数组进行排序并保持索引关系 |
| assert | 检查一个断言是否为 FALSE |
| assert_options | 设置/获取断言的各种标志 |
| atan | 反正切 |
| atan2 | 两个参数的反正切 |
| atanh | 反双曲正切 |
b
| 函数 | 说明 |
|---|---|
| base64_decode | 对使用 MIME base64 编码的数据进行解码 |
| base64_encode | 使用 MIME base64 对数据进行编码 |
| basename | 返回路径中的文件名部分 |
| base_convert | 在任意进制之间转换数字 |
| bbcode_add_element | Adds a bbcode element |
| bbcode_add_smiley | Adds a smiley to the parser |
| bbcode_create | Create a BBCode Resource |
| bbcode_destroy | Close BBCode_container resource |
| bbcode_parse | Parse a string following a given rule set |
| bbcode_set_arg_parser | Attach another parser in order to use another rule set for argument parsing |
| bbcode_set_flags | Set or alter parser options |
| bcadd | 2个任意精度数字的加法计算 |
| bccomp | 比较两个任意精度的数字 |
| bcdiv | 2个任意精度的数字除法计算 |
| bcmod | 对一个任意精度数字取模 |
| bcmul | 2个任意精度数字乘法计算 |
| bcompiler_load | 从一个 bz 压缩过的文件中读取并创建类 |
| bcompiler_load_exe | 从一个 bcompiler exe 文件中读取并创建类 |
| bcompiler_parse_class | 读取一个类的字节码并回调一个用户的函数 |
| bcompiler_read | 从一个文件句柄中读取并创建类 |
| bcompiler_write_class | 写入定义过的类的字节码 |
| bcompiler_write_constant | 写入定义过的常量的字节码 |
| bcompiler_write_exe_footer | 写入开始位置以及 exe 类型文件的结尾信号 |
| bcompiler_write_file | 写入 PHP 源码文件的字节码 |
| bcompiler_write_footer | 写入单个字符 \x00 用于标识编译数据的结尾 |
| bcompiler_write_function | 以字节码写入定义过的函数 |
| bcompiler_write_functions_from_file | 以字节码写入一个文件中定义过的所以函数 |
| bcompiler_write_header | 写入 bcompiler 头 |
| bcompiler_write_included_filename | 写入一个包含的文件的字节码 |
| bcpow | 任意精度数字的成方 |
| bcpowmod | Raise an arbitrary precision number to another, reduced by a specified modulus |
| bcscale | 设置所有bc数学函数的默认小数点保留位数 |
| bcsqrt | 任意精度数字的二次方根 |
| bcsub | 2个任意精度数字的减法 |
| bin2hex | 函数把ASCII字符的字符串转换为十六进制值 |
| bindec | 二进制转换为十进制 |
| bindtextdomain | Sets the path for a domain |
| bind_textdomain_codeset | Specify the character encoding in which the messages from the DOMAIN message catalog will be returned |
| blenc_encrypt | Encrypt a PHP script with BLENC. |
| boolval | Get the boolean value of a variable |
| bson_decode | 反序列化一个 BSON 对象为 PHP 数组 |
| bson_encode | 序列化一个 PHP 变量为 BSON 字符串 |
| bzclose | 关闭一个 bzip2 文件 |
| bzcompress | 把一个字符串压缩成 bzip2 编码数据 |
| bzdecompress | 解压经 bzip2 编码过的数据 |
| bzerrno | 返回一个 bzip2 错误码 |
| bzerror | 返回包含 bzip2 错误号和错误字符串的一个 array |
| bzerrstr | 返回一个 bzip2 的错误字符串 |
| bzflush | 强制写入所有写缓冲区的数据 |
| bzopen | 打开一个经 bzip2 压缩过的文件 |
| bzread | bzip2 文件二进制安全地读取 |
| bzwrite | 二进制安全地写入 bzip2 文件 |
c
| 函数 | 说明 |
|---|---|
| cairo_create | Returns a new CairoContext object on the requested surface. |
| cairo_font_face_get_type | Description |
| cairo_font_options_create | Description |
| cairo_font_options_equal | Description |
| cairo_font_options_get_antialias | Description |
| cairo_font_options_get_hint_metrics | Description |
| cairo_font_options_get_hint_style | Description |
| cairo_font_options_get_subpixel_order | Description |
| cairo_font_options_hash | Description |
| cairo_font_options_merge | Description |
| cairo_font_options_set_antialias | Description |
| cairo_font_options_set_hint_metrics | Description |
| cairo_font_options_set_hint_style | Description |
| cairo_font_options_set_subpixel_order | Description |
| cairo_font_options_status | Description |
| cairo_format_stride_for_width | Description |
| cairo_image_surface_create | Description |
| cairo_image_surface_create_for_data | Description |
| cairo_image_surface_create_from_png | Description |
| cairo_image_surface_get_data | Description |
| cairo_image_surface_get_format | Description |
| cairo_image_surface_get_height | Description |
| cairo_image_surface_get_stride | Description |
| cairo_image_surface_get_width | Description |
| cairo_matrix_invert | Description |
| cairo_matrix_multiply | Description |
| cairo_matrix_rotate | Description |
| cairo_matrix_transform_distance | Description |
| cairo_matrix_transform_point | Description |
| cairo_matrix_translate | Description |
| cairo_pattern_add_color_stop_rgb | Description |
| cairo_pattern_add_color_stop_rgba | Description |
| cairo_pattern_create_for_surface | Description |
| cairo_pattern_create_linear | Description |
| cairo_pattern_create_radial | Description |
| cairo_pattern_create_rgb | Description |
| cairo_pattern_create_rgba | Description |
| cairo_pattern_get_color_stop_count | Description |
| cairo_pattern_get_color_stop_rgba | Description |
| cairo_pattern_get_extend | Description |
| cairo_pattern_get_filter | Description |
| cairo_pattern_get_linear_points | Description |
| cairo_pattern_get_matrix | Description |
| cairo_pattern_get_radial_circles | Description |
| cairo_pattern_get_rgba | Description |
| cairo_pattern_get_surface | Description |
| cairo_pattern_get_type | Description |
| cairo_pattern_set_extend | Description |
| cairo_pattern_set_filter | Description |
| cairo_pattern_set_matrix | Description |
| cairo_pattern_status | Description |
| cairo_pdf_surface_create | Description |
| cairo_pdf_surface_set_size | Description |
| cairo_ps_get_levels | Description |
| cairo_ps_level_to_string | Description |
| cairo_ps_surface_create | Description |
| cairo_ps_surface_dsc_begin_page_setup | Description |
| cairo_ps_surface_dsc_begin_setup | Description |
| cairo_ps_surface_dsc_comment | Description |
| cairo_ps_surface_get_eps | Description |
| cairo_ps_surface_restrict_to_level | Description |
| cairo_ps_surface_set_eps | Description |
| cairo_ps_surface_set_size | Description |
| cairo_scaled_font_create | Description |
| cairo_scaled_font_extents | Description |
| cairo_scaled_font_get_ctm | Description |
| cairo_scaled_font_get_font_face | Description |
| cairo_scaled_font_get_font_matrix | Description |
| cairo_scaled_font_get_font_options | Description |
| cairo_scaled_font_get_scale_matrix | Description |
| cairo_scaled_font_get_type | Description |
| cairo_scaled_font_glyph_extents | Description |
| cairo_scaled_font_status | Description |
| cairo_scaled_font_text_extents | Description |
| cairo_surface_copy_page | Description |
| cairo_surface_create_similar | Description |
| cairo_surface_finish | Description |
| cairo_surface_flush | Description |
| cairo_surface_get_content | Description |
| cairo_surface_get_device_offset | Description |
| cairo_surface_get_font_options | Description |
| cairo_surface_get_type | Description |
| cairo_surface_mark_dirty | Description |
| cairo_surface_mark_dirty_rectangle | Description |
| cairo_surface_set_device_offset | Description |
| cairo_surface_set_fallback_resolution | Description |
| cairo_surface_show_page | Description |
| cairo_surface_status | Description |
| cairo_surface_write_to_png | Description |
| cairo_svg_surface_create | Description |
| cairo_svg_surface_restrict_to_version | Description |
| cairo_svg_version_to_string | Description |
| calculhmac | Obtain a hmac key (needs 2 arguments) |
| calcul_hmac | Obtain a hmac key (needs 8 arguments) |
| call_user_func | 把第一个参数作为回调函数调用 |
| call_user_func_array | 调用回调函数，并把一个数组参数作为回调函数的参数 |
| call_user_method | 对特定对象调用用户方法（已废弃） |
| call_user_method_array | 调用一个用户方法，同时传递参数数组（已废弃） |
| cal_days_in_month | 返回某个历法中某年中某月的天数 |
| cal_from_jd | 转换Julian Day计数到一个支持的历法。 |
| cal_info | 返回选定历法的信息 |
| cal_to_jd | 从一个支持的历法转变为Julian Day计数。 |
| ceil | 进一法取整 |
| chdb_create | Creates a chdb file |
| chdir | 改变目录 |
| checkdate | 验证一个格里高里日期 |
| checkdnsrr | 给指定的主机（域名）或者IP地址做DNS通信检查 |
| chgrp | 改变文件所属的组 |
| chmod | 改变文件模式 |
| chop | rtrim 的别名 |
| chown | 改变文件的所有者 |
| chr | 返回指定的字符 |
| chroot | 改变根目录 |
| chunk_split | 将字符串分割成小块 |
| classkit_import | Import new class method definitions from a file |
| classkit_method_add | Dynamically adds a new method to a given class |
| classkit_method_copy | Copies a method from class to another |
| classkit_method_redefine | Dynamically changes the code of the given method |
| classkit_method_remove | Dynamically removes the given method |
| classkit_method_rename | Dynamically changes the name of the given method |
| class_alias | 为一个类创建别名 |
| class_exists | 检查类是否已定义 |
| class_implements | 返回指定的类实现的所有接口。 |
| class_parents | 返回指定类的父类。 |
| class_uses | Return the traits used by the given class |
| clearstatcache | 清除文件状态缓存 |
| cli_get_process_title | Returns the current process title |
| cli_set_process_title | Sets the process title |
| closedir | 关闭目录句柄 |
| closelog | 关闭系统日志链接 |
| compact | 建立一个数组，包括变量名和它们的值 |
| com_create_guid | Generate a globally unique identifier (GUID) |
| com_event_sink | Connect events from a COM object to a PHP object |
| com_get_active_object | Returns a handle to an already running instance of a COM object |
| com_load_typelib | 装载一个 Typelib |
| com_message_pump | Process COM messages, sleeping for up to timeoutms milliseconds |
| com_print_typeinfo | Print out a PHP class definition for a dispatchable interface |
| connection_aborted | 检查客户端是否已经断开 |
| connection_status | 返回连接的状态位 |
| constant | 返回一个常量的值 |
| Constants for PDO_4D | Constants for PDO_4D |
| Context 参数 | Context 参数列表 |
| convert_cyr_string | 将字符由一种 Cyrillic 字符转换成另一种 |
| convert_uudecode | 解码一个 uuencode 编码的字符串 |
| convert_uuencode | 使用 uuencode 编码一个字符串 |
| copy | 拷贝文件 |
| cos | 余弦 |
| cosh | 双曲余弦 |
| count | 计算数组中的单元数目或对象中的属性个数 |
| counter_bump | 修改简单计数器的当前值。 |
| counter_bump_value | 更新计数器资源的当前值。 |
| counter_create | 创建一个包含单个数值的计数器。 |
| counter_get | 获取简单计数器的当前值。 |
| counter_get_meta | 返回计数器资源的部分元信息。 |
| counter_get_named | 按名称查询一个已存在的计数器，并作为资源返回。 |
| counter_get_value | 获取计数器资源的当前值。 |
| counter_reset | 重置简单计数器的当前值。 |
| counter_reset_value | 重置计数器资源的当前值。 |
| count_chars | 返回字符串所用字符的信息 |
| crack_check | Performs an obscure check with the given password |
| crack_closedict | Closes an open CrackLib dictionary |
| crack_getlastmessage | Returns the message from the last obscure check |
| crack_opendict | Opens a new CrackLib dictionary |
| crc32 | 计算一个字符串的 crc32 多项式 |
| create_function | Create an anonymous (lambda-style) function |
| crypt | 单向字符串散列 |
| ctype_alnum | 做字母和数字字符检测 |
| ctype_alpha | 做纯字符检测 |
| ctype_cntrl | 做控制字符检测 |
| ctype_digit | 做纯数字检测 |
| ctype_graph | 做可打印字符串检测，空格除外 |
| ctype_lower | 做小写字符检测 |
| ctype_print | 做可打印字符检测 |
| ctype_punct | 检测可打印的字符是不是不包含空白、数字和字母 |
| ctype_space | 做空白字符检测 |
| ctype_upper | 做大写字母检测 |
| ctype_xdigit | 检测字符串是否只包含十六进制字符 |
| cubrid_affected_rows | Return the number of rows affected by the last SQL statement |
| cubrid_bind | Bind variables to a prepared statement as parameters |
| cubrid_client_encoding | Return the current CUBRID connection charset |
| cubrid_close | Close CUBRID connection |
| cubrid_close_prepare | Close the request handle |
| cubrid_close_request | Close the request handle |
| cubrid_column_names | Get the column names in result |
| cubrid_column_types | Get column types in result |
| cubrid_col_get | Get contents of collection type column using OID |
| cubrid_col_size | Get the number of elements in collection type column using OID |
| cubrid_commit | Commit a transaction |
| cubrid_connect | Open a connection to a CUBRID Server |
| cubrid_connect_with_url | Establish the environment for connecting to CUBRID server |
| cubrid_current_oid | Get OID of the current cursor location |
| cubrid_data_seek | Move the internal row pointer of the CUBRID result |
| cubrid_db_name | Get db name from results of cubrid_list_dbs |
| cubrid_disconnect | Close a database connection |
| cubrid_drop | Delete an instance using OID |
| cubrid_errno | Return the numerical value of the error message from previous CUBRID operation |
| cubrid_error | Get the error message |
| cubrid_error_code | Get error code for the most recent function call |
| cubrid_error_code_facility | Get the facility code of error |
| cubrid_error_msg | Get last error message for the most recent function call |
| cubrid_execute | Execute a prepared SQL statement |
| cubrid_fetch | Fetch the next row from a result set |
| cubrid_fetch_array | Fetch a result row as an associative array, a numeric array, or both |
| cubrid_fetch_assoc | Return the associative array that corresponds to the fetched row |
| cubrid_fetch_field | Get column information from a result and return as an object |
| cubrid_fetch_lengths | Return an array with the lengths of the values of each field from the current row |
| cubrid_fetch_object | Fetche the next row and returns it as an object |
| cubrid_fetch_row | Return a numerical array with the values of the current row |
| cubrid_field_flags | Return a string with the flags of the given field offset |
| cubrid_field_len | Get the maximum length of the specified field |
| cubrid_field_name | Return the name of the specified field index |
| cubrid_field_seek | Move the result set cursor to the specified field offset |
| cubrid_field_table | Return the name of the table of the specified field |
| cubrid_field_type | Return the type of the column corresponding to the given field offset |
| cubrid_free_result | Free the memory occupied by the result data |
| cubrid_get | Get a column using OID |
| cubrid_get_autocommit | Get auto-commit mode of the connection |
| cubrid_get_charset | Return the current CUBRID connection charset |
| cubrid_get_class_name | Get the class name using OID |
| cubrid_get_client_info | Return the client library version |
| cubrid_get_db_parameter | Returns the CUBRID database parameters |
| cubrid_get_query_timeout | Get the query timeout value of the request |
| cubrid_get_server_info | Return the CUBRID server version |
| cubrid_insert_id | Return the ID generated for the last updated AUTO_INCREMENT column |
| cubrid_is_instance | Check whether the instance pointed by OID exists |
| cubrid_list_dbs | Return an array with the list of all existing CUBRID databases |
| cubrid_load_from_glo | Read data from a GLO instance and save it in a file |
| cubrid_lob2_bind | Bind a lob object or a string as a lob object to a prepared statement as parameters. |
| cubrid_lob2_close | Close LOB object. |
| cubrid_lob2_export | Export the lob object to a file. |
| cubrid_lob2_import | Import BLOB/CLOB data from a file. |
| cubrid_lob2_new | Create a lob object. |
| cubrid_lob2_read | Read from BLOB/CLOB data. |
| cubrid_lob2_seek | Move the cursor of a lob object. |
| cubrid_lob2_seek64 | Move the cursor of a lob object. |
| cubrid_lob2_size | Get a lob object’s size. |
| cubrid_lob2_size64 | Get a lob object’s size. |
| cubrid_lob2_tell | Tell the cursor position of the LOB object. |
| cubrid_lob2_tell64 | Tell the cursor position of the LOB object. |
| cubrid_lob2_write | Write to a lob object. |
| cubrid_lob_close | Close BLOB/CLOB data |
| cubrid_lob_export | Export BLOB/CLOB data to file |
| cubrid_lob_get | Get BLOB/CLOB data |
| cubrid_lob_send | Read BLOB/CLOB data and send straight to browser |
| cubrid_lob_size | Get BLOB/CLOB data size |
| cubrid_lock_read | Set a read lock on the given OID |
| cubrid_lock_write | Set a write lock on the given OID |
| cubrid_move_cursor | Move the cursor in the result |
| cubrid_new_glo | Create a glo instance |
| cubrid_next_result | Get result of next query when executing multiple SQL statements |
| cubrid_num_cols | Return the number of columns in the result set |
| cubrid_num_fields | Return the number of columns in the result set |
| cubrid_num_rows | Get the number of rows in the result set |
| cubrid_pconnect | Open a persistent connection to a CUBRID server |
| cubrid_pconnect_with_url | Open a persistent connection to CUBRID server |
| cubrid_ping | Ping a server connection or reconnect if there is no connection |
| cubrid_prepare | Prepare a SQL statement for execution |
| cubrid_put | Update a column using OID |
| cubrid_query | Send a CUBRID query |
| cubrid_real_escape_string | Escape special characters in a string for use in an SQL statement |
| cubrid_result | Return the value of a specific field in a specific row |
| cubrid_rollback | Roll back a transaction |
| cubrid_save_to_glo | Save requested file in a GLO instance |
| cubrid_schema | Get the requested schema information |
| cubrid_send_glo | Read data from glo and send it to std output |
| cubrid_seq_drop | Delete an element from sequence type column using OID |
| cubrid_seq_insert | Insert an element to a sequence type column using OID |
| cubrid_seq_put | Update the element value of sequence type column using OID |
| cubrid_set_add | Insert a single element to set type column using OID |
| cubrid_set_autocommit | Set autocommit mode of the connection |
| cubrid_set_db_parameter | Sets the CUBRID database parameters |
| cubrid_set_drop | Delete an element from set type column using OID |
| cubrid_set_query_timeout | Set the timeout time of query execution |
| cubrid_unbuffered_query | Perform a query without fetching the results into memory |
| cubrid_version | Get the CUBRID PHP module’s version |
| CURL context options | CURL 上下文选项列表 |
| curl_close | 关闭一个cURL会话 |
| curl_copy_handle | 复制一个cURL句柄和它的所有选项 |
| curl_errno | 返回最后一次的错误号 |
| curl_error | 返回一个保护当前会话最近一次错误的字符串 |
| curl_escape | 使用 URL 编码给定的字符串 |
| curl_exec | 执行一个cURL会话 |
| curl_file_create | 创建一个 CURLFile 对象 |
| curl_getinfo | 获取一个cURL连接资源句柄的信息 |
| curl_init | 初始化一个cURL会话 |
| curl_multi_add_handle | 向curl批处理会话中添加单独的curl句柄 |
| curl_multi_close | 关闭一组cURL句柄 |
| curl_multi_exec | 运行当前 cURL 句柄的子连接 |
| curl_multi_getcontent | 如果设置了CURLOPT_RETURNTRANSFER，则返回获取的输出的文本流 |
| curl_multi_info_read | 获取当前解析的cURL的相关传输信息 |
| curl_multi_init | 返回一个新cURL批处理句柄 |
| curl_multi_remove_handle | 移除curl批处理句柄资源中的某个句柄资源 |
| curl_multi_select | 等待所有cURL批处理中的活动连接 |
| curl_multi_setopt | 为 cURL 并行处理设置一个选项 |
| curl_multi_strerror | Return string describing error code |
| curl_pause | Pause and unpause a connection |
| curl_reset | Reset all options of a libcurl session handle |
| curl_setopt | 设置一个cURL传输选项 |
| curl_setopt_array | 为cURL传输会话批量设置选项 |
| curl_share_close | Close a cURL share handle |
| curl_share_init | Initialize a cURL share handle |
| curl_share_setopt | Set an option for a cURL share handle. |
| curl_strerror | Return string describing the given error code |
| curl_unescape | 解码给定的 URL 编码的字符串 |
| curl_version | 获取cURL版本信息 |
| current | 返回数组中的当前单元 |
| cyrus_authenticate | Authenticate against a Cyrus IMAP server |
| cyrus_bind | Bind callbacks to a Cyrus IMAP connection |
| cyrus_close | Close connection to a Cyrus IMAP server |
| cyrus_connect | Connect to a Cyrus IMAP server |
| cyrus_query | Send a query to a Cyrus IMAP server |
| cyrus_unbind | Unbind … |
d
| 函数 | 说明 |
|---|---|
| date | 格式化一个本地时间／日期 |
| date_default_timezone_get | 取得一个脚本中所有日期时间函数所使用的默认时区 |
| date_default_timezone_set | 设定用于一个脚本中所有日期时间函数的默认时区 |
| date_parse | Returns associative array with detailed info about given date |
| date_parse_from_format | Get info about given date formatted according to the specified format |
| date_sunrise | 返回给定的日期与地点的日出时间 |
| date_sunset | 返回给定的日期与地点的日落时间 |
| date_sun_info | Returns an array with information about sunset/sunrise and twilight begin/end |
| db2_autocommit | Returns or sets the AUTOCOMMIT state for a database connection |
| db2_bind_param | Binds a PHP variable to an SQL statement parameter |
| db2_client_info | Returns an object with properties that describe the DB2 database client |
| db2_close | Closes a database connection |
| db2_columns | Returns a result set listing the columns and associated metadata for a table |
| db2_column_privileges | Returns a result set listing the columns and associated privileges for a table |
| db2_commit | Commits a transaction |
| db2_connect | Returns a connection to a database |
| db2_conn_error | Returns a string containing the SQLSTATE returned by the last connection attempt |
| db2_conn_errormsg | Returns the last connection error message and SQLCODE value |
| db2_cursor_type | Returns the cursor type used by a statement resource |
| db2_escape_string | Used to escape certain characters |
| db2_exec | Executes an SQL statement directly |
| db2_execute | Executes a prepared SQL statement |
| db2_fetch_array | Returns an array, indexed by column position, representing a row in a result set |
| db2_fetch_assoc | Returns an array, indexed by column name, representing a row in a result set |
| db2_fetch_both | Returns an array, indexed by both column name and position, representing a row in a result set |
| db2_fetch_object | Returns an object with properties representing columns in the fetched row |
| db2_fetch_row | Sets the result set pointer to the next row or requested row |
| db2_field_display_size | Returns the maximum number of bytes required to display a column |
| db2_field_name | Returns the name of the column in the result set |
| db2_field_num | Returns the position of the named column in a result set |
| db2_field_precision | Returns the precision of the indicated column in a result set |
| db2_field_scale | Returns the scale of the indicated column in a result set |
| db2_field_type | Returns the data type of the indicated column in a result set |
| db2_field_width | Returns the width of the current value of the indicated column in a result set |
| db2_foreign_keys | Returns a result set listing the foreign keys for a table |
| db2_free_result | Frees resources associated with a result set |
| db2_free_stmt | Frees resources associated with the indicated statement resource |
| db2_get_option | Retrieves an option value for a statement resource or a connection resource |
| db2_last_insert_id | Returns the auto generated ID of the last insert query that successfully executed on this connection |
| db2_lob_read | Gets a user defined size of LOB files with each invocation |
| db2_next_result | Requests the next result set from a stored procedure |
| db2_num_fields | Returns the number of fields contained in a result set |
| db2_num_rows | Returns the number of rows affected by an SQL statement |
| db2_pclose | Closes a persistent database connection |
| db2_pconnect | Returns a persistent connection to a database |
| db2_prepare | Prepares an SQL statement to be executed |
| db2_primary_keys | Returns a result set listing primary keys for a table |
| db2_procedures | Returns a result set listing the stored procedures registered in a database |
| db2_procedure_columns | Returns a result set listing stored procedure parameters |
| db2_result | Returns a single column from a row in the result set |
| db2_rollback | Rolls back a transaction |
| db2_server_info | Returns an object with properties that describe the DB2 database server |
| db2_set_option | Set options for connection or statement resources |
| db2_special_columns | Returns a result set listing the unique row identifier columns for a table |
| db2_statistics | Returns a result set listing the index and statistics for a table |
| db2_stmt_error | Returns a string containing the SQLSTATE returned by an SQL statement |
| db2_stmt_errormsg | Returns a string containing the last SQL statement error message |
| db2_tables | Returns a result set listing the tables and associated metadata in a database |
| db2_table_privileges | Returns a result set listing the tables and associated privileges in a database |
| dbase_add_record | Adds a record to a database |
| dbase_close | Closes a database |
| dbase_create | Creates a database |
| dbase_delete_record | Deletes a record from a database |
| dbase_get_header_info | Gets the header info of a database |
| dbase_get_record | Gets a record from a database as an indexed array |
| dbase_get_record_with_names | Gets a record from a database as an associative array |
| dbase_numfields | Gets the number of fields of a database |
| dbase_numrecords | Gets the number of records in a database |
| dbase_open | Opens a database |
| dbase_pack | Packs a database |
| dbase_replace_record | Replaces a record in a database |
| dba_close | Close a DBA database |
| dba_delete | Delete DBA entry specified by key |
| dba_exists | Check whether key exists |
| dba_fetch | Fetch data specified by key |
| dba_firstkey | Fetch first key |
| dba_handlers | List all the handlers available |
| dba_insert | Insert entry |
| dba_key_split | Splits a key in string representation into array representation |
| dba_list | List all open database files |
| dba_nextkey | Fetch next key |
| dba_open | Open database |
| dba_optimize | Optimize database |
| dba_popen | Open database persistently |
| dba_replace | Replace or insert entry |
| dba_sync | Synchronize database |
| dbplus_add | Add a tuple to a relation |
| dbplus_aql | Perform AQL query |
| dbplus_chdir | Get/Set database virtual current directory |
| dbplus_close | Close a relation |
| dbplus_curr | Get current tuple from relation |
| dbplus_errcode | Get error string for given errorcode or last error |
| dbplus_errno | Get error code for last operation |
| dbplus_find | Set a constraint on a relation |
| dbplus_first | Get first tuple from relation |
| dbplus_flush | Flush all changes made on a relation |
| dbplus_freealllocks | Free all locks held by this client |
| dbplus_freelock | Release write lock on tuple |
| dbplus_freerlocks | Free all tuple locks on given relation |
| dbplus_getlock | Get a write lock on a tuple |
| dbplus_getunique | Get an id number unique to a relation |
| dbplus_info | Get information about a relation |
| dbplus_last | Get last tuple from relation |
| dbplus_lockrel | Request write lock on relation |
| dbplus_next | Get next tuple from relation |
| dbplus_open | Open relation file |
| dbplus_prev | Get previous tuple from relation |
| dbplus_rchperm | Change relation permissions |
| dbplus_rcreate | Creates a new DB++ relation |
| dbplus_rcrtexact | Creates an exact but empty copy of a relation including indices |
| dbplus_rcrtlike | Creates an empty copy of a relation with default indices |
| dbplus_resolve | Resolve host information for relation |
| dbplus_restorepos | Restore position |
| dbplus_rkeys | Specify new primary key for a relation |
| dbplus_ropen | Open relation file local |
| dbplus_rquery | Perform local (raw) AQL query |
| dbplus_rrename | Rename a relation |
| dbplus_rsecindex | Create a new secondary index for a relation |
| dbplus_runlink | Remove relation from filesystem |
| dbplus_rzap | Remove all tuples from relation |
| dbplus_savepos | Save position |
| dbplus_setindex | Set index |
| dbplus_setindexbynumber | Set index by number |
| dbplus_sql | Perform SQL query |
| dbplus_tcl | Execute TCL code on server side |
| dbplus_tremove | Remove tuple and return new current tuple |
| dbplus_undo | Undo |
| dbplus_undoprepare | Prepare undo |
| dbplus_unlockrel | Give up write lock on relation |
| dbplus_unselect | Remove a constraint from relation |
| dbplus_update | Update specified tuple in relation |
| dbplus_xlockrel | Request exclusive lock on relation |
| dbplus_xunlockrel | Free exclusive lock on relation |
| dbx_close | Close an open connection/database |
| dbx_compare | Compare two rows for sorting purposes |
| dbx_connect | Open a connection/database |
| dbx_error | Report the error message of the latest function call in the module |
| dbx_escape_string | Escape a string so it can safely be used in an sql-statement |
| dbx_fetch_row | Fetches rows from a query-result that had the DBX_RESULT_UNBUFFERED flag set |
| dbx_query | Send a query and fetch all results (if any) |
| dbx_sort | Sort a result from a dbx_query by a custom sort function |
| dcgettext | Overrides the domain for a single lookup |
| dcngettext | Plural version of dcgettext |
| debug_backtrace | 产生一条回溯跟踪(backtrace) |
| debug_print_backtrace | 打印一条回溯。 |
| debug_zval_dump | Dumps a string representation of an internal zend value to output |
| decbin | 十进制转换为二进制 |
| dechex | 十进制转换为十六进制 |
| decoct | 十进制转换为八进制 |
| define | 定义一个常量 |
| defined | 检查某个名称的常量是否存在 |
| define_syslog_variables | Initializes all syslog related variables |
| deg2rad | 将角度转换为弧度 |
| delete | 参见 unlink 或 unset |
| dgettext | Override the current domain |
| die | 等同于 exit |
| dio_close | Closes the file descriptor given by fd |
| dio_fcntl | Performs a c library fcntl on fd |
| dio_open | Opens a file (creating it if necessary) at a lower level than the C library input/ouput stream functions allow. |
| dio_read | Reads bytes from a file descriptor |
| dio_seek | Seeks to pos on fd from whence |
| dio_stat | Gets stat information about the file descriptor fd |
| dio_tcsetattr | Sets terminal attributes and baud rate for a serial port |
| dio_truncate | Truncates file descriptor fd to offset bytes |
| dio_write | Writes data to fd with optional truncation at length |
| dir | 返回一个 Directory 类实例 |
| dirname | 返回路径中的目录部分 |
| diskfreespace | disk_free_space 的别名 |
| disk_free_space | 返回目录中的可用空间 |
| disk_total_space | 返回一个目录的磁盘总大小 |
| dl | 运行时载入一个 PHP 扩展 |
| dngettext | Plural version of dgettext |
| dns_check_record | 别名 checkdnsrr |
| dns_get_mx | 别名 getmxrr |
| dns_get_record | 获取指定主机的DNS记录 |
| dom_import_simplexml | Gets a DOMElement object from a SimpleXMLElement object |
| doubleval | floatval 的别名 |
e
| 函数 | 说明 |
|---|---|
| each | 返回数组中当前的键／值对并将数组指针向前移动一步 |
| easter_date | 得到指定年份的复活节午夜时的Unix时间戳。 |
| easter_days | 得到指定年份的3月21日到复活节之间的天数 |
| echo | 输出一个或多个字符串 |
| eio_busy | Artificially increase load. Could be useful in tests, benchmarking. |
| eio_cancel | Cancels a request |
| eio_chmod | Change file/direcrory permissions. |
| eio_chown | Change file/direcrory permissions. |
| eio_close | Close file |
| eio_custom | Execute custom request like any other eio_* call. |
| eio_dup2 | Duplicate a file descriptor |
| eio_event_loop | Polls libeio until all requests proceeded |
| eio_fallocate | Allows the caller to directly manipulate the allocated disk space for a file |
| eio_fchmod | Change file permissions. |
| eio_fchown | Change file ownership |
| eio_fdatasync | Synchronize a file’s in-core state with storage device. |
| eio_fstat | Get file status |
| eio_fstatvfs | Get file system statistics |
| eio_fsync | Synchronize a file’s in-core state with storage device |
| eio_ftruncate | Truncate a file |
| eio_futime | Change file last access and modification times |
| eio_get_event_stream | Get stream representing a variable used in internal communications with libeio. |
| eio_get_last_error | Returns string describing the last error associated with a request resource |
| eio_grp | Createsa request group. |
| eio_grp_add | Adds a request to the request group. |
| eio_grp_cancel | Cancels a request group |
| eio_grp_limit | Set group limit |
| eio_init | (Re-)initialize Eio |
| eio_link | Create a hardlink for file |
| eio_lstat | Get file status |
| eio_mkdir | Create directory |
| eio_mknod | Create a special or ordinary file. |
| eio_nop | Does nothing, except go through the whole request cycle. |
| eio_npending | Returns number of finished, but unhandled requests |
| eio_nready | Returns number of not-yet handled requests |
| eio_nreqs | Returns number of requests to be processed |
| eio_nthreads | Returns number of threads currently in use |
| eio_open | Opens a file |
| eio_poll | Can be to be called whenever there are pending requests that need finishing. |
| eio_read | Read from a file descriptor at given offset. |
| eio_readahead | Perform file readahead into page cache |
| eio_readdir | Reads through a whole directory |
| eio_readlink | Read value of a symbolic link. |
| eio_realpath | Get the canonicalized absolute pathname. |
| eio_rename | Change the name or location of a file. |
| eio_rmdir | Remove a directory |
| eio_seek | Repositions the offset of the open file associated with the fd argument to the argument offset according to the directive whence |
| eio_sendfile | Transfer data between file descriptors |
| eio_set_max_idle | Set maximum number of idle threads. |
| eio_set_max_parallel | Set maximum parallel threads |
| eio_set_max_poll_reqs | Set maximum number of requests processed in a poll. |
| eio_set_max_poll_time | Set maximum poll time |
| eio_set_min_parallel | Set minimum parallel thread number |
| eio_stat | Get file status |
| eio_statvfs | Get file system statistics |
| eio_symlink | Create a symbolic link |
| eio_sync | Commit buffer cache to disk |
| eio_syncfs | Calls Linux’ syncfs syscall, if available |
| eio_sync_file_range | Sync a file segment with disk |
| eio_truncate | Truncate a file |
| eio_unlink | Delete a name and possibly the file it refers to |
| eio_utime | Change file last access and modification times. |
| eio_write | Write to file |
| empty | 检查一个变量是否为空 |
| enchant_broker_describe | Enumerates the Enchant providers |
| enchant_broker_dict_exists | Whether a dictionary exists or not. Using non-empty tag |
| enchant_broker_free | Free the broker resource and its dictionnaries |
| enchant_broker_free_dict | Free a dictionary resource |
| enchant_broker_get_dict_path | Get the directory path for a given backend |
| enchant_broker_get_error | Returns the last error of the broker |
| enchant_broker_init | create a new broker object capable of requesting |
| enchant_broker_list_dicts | Returns a list of available dictionaries |
| enchant_broker_request_dict | create a new dictionary using a tag |
| enchant_broker_request_pwl_dict | creates a dictionary using a PWL file |
| enchant_broker_set_dict_path | Set the directory path for a given backend |
| enchant_broker_set_ordering | Declares a preference of dictionaries to use for the language |
| enchant_dict_add_to_personal | add a word to personal word list |
| enchant_dict_add_to_session | add ‘word’ to this spell-checking session |
| enchant_dict_check | Check whether a word is correctly spelled or not |
| enchant_dict_describe | Describes an individual dictionary |
| enchant_dict_get_error | Returns the last error of the current spelling-session |
| enchant_dict_is_in_session | whether or not ‘word’ exists in this spelling-session |
| enchant_dict_quick_check | Check the word is correctly spelled and provide suggestions |
| enchant_dict_store_replacement | Add a correction for a word |
| enchant_dict_suggest | Will return a list of values if any of those pre-conditions are not met |
| end | 将数组的内部指针指向最后一个单元 |
| ereg | 正则表达式匹配 |
| eregi | 不区分大小写的正则表达式匹配 |
| eregi_replace | 不区分大小写的正则表达式替换 |
| ereg_replace | 正则表达式替换 |
| error_clear_last | Clear the most recent error |
| error_get_last | 获取最后发生的错误 |
| error_log | 发送错误信息到某个地方 |
| error_reporting | 设置应该报告何种 PHP 错误 |
| escapeshellarg | 把字符串转码为可以在 shell 命令里使用的参数 |
| escapeshellcmd | shell 元字符转义 |
| eval | 把字符串作为PHP代码执行 |
| event_base_free | Destroy event base |
| event_base_loop | Handle events |
| event_base_loopbreak | Abort event loop |
| event_base_loopexit | Exit loop after a time |
| event_base_new | Create and initialize new event base |
| event_base_priority_init | Set the number of event priority levels |
| event_base_reinit | Reinitialize the event base after a fork |
| event_base_set | Associate event base with an event |
| event_buffer_base_set | Associate buffered event with an event base |
| event_buffer_disable | Disable a buffered event |
| event_buffer_enable | Enable a buffered event |
| event_buffer_fd_set | Change a buffered event file descriptor |
| event_buffer_free | Destroy buffered event |
| event_buffer_new | Create new buffered event |
| event_buffer_priority_set | Assign a priority to a buffered event |
| event_buffer_read | Read data from a buffered event |
| event_buffer_set_callback | Set or reset callbacks for a buffered event |
| event_buffer_timeout_set | Set read and write timeouts for a buffered event |
| event_buffer_watermark_set | Set the watermarks for read and write events |
| event_buffer_write | Write data to a buffered event |
| event_new | Create new event |
| event_priority_set | Assign a priority to an event. |
| event_timer_add | 别名 event_add |
| event_timer_del | 别名 event_del |
| event_timer_new | 别名 event_new |
| event_timer_set | Prepare a timer event |
| Examples with PDO_4D | Examples PDO_4D |
| exec | 执行一个外部程序 |
| exif_imagetype | 判断一个图像的类型 |
| exif_read_data | 从 JPEG 或 TIFF 文件中读取 EXIF 头信息 |
| exif_tagname | 获取指定索引的头名称 |
| exif_thumbnail | 取得嵌入在 TIFF 或 JPEG 图像中的缩略图 |
| exit | 输出一个消息并且退出当前脚本 |
| exp | 计算 e 的指数 |
| expect_expectl | Waits until the output from a process matches one of the patterns, a specified time period has passed, or an EOF is seen |
| expect_popen | Execute command via Bourne shell, and open the PTY stream to the process |
| explode | 使用一个字符串分割另一个字符串 |
| expm1 | 返回 exp(number) |
| extension_loaded | 检查一个扩展是否已经加载 |
| extract | 从数组中将变量导入到当前的符号表 |
| ezmlm_hash | 计算 EZMLM 所需的散列值 |
f
| 函数 | 说明 |
|---|---|
| fam_cancel_monitor | Terminate monitoring |
| fam_close | Close FAM connection |
| fam_monitor_collection | Monitor a collection of files in a directory for changes |
| fam_monitor_directory | Monitor a directory for changes |
| fam_monitor_file | Monitor a regular file for changes |
| fam_next_event | Get next pending FAM event |
| fam_open | Open connection to FAM daemon |
| fam_pending | Check for pending FAM events |
| fam_resume_monitor | Resume suspended monitoring |
| fam_suspend_monitor | Temporarily suspend monitoring |
| fann_cascadetrain_on_data | Trains on an entire dataset, for a period of time using the Cascade2 training algorithm |
| fann_cascadetrain_on_file | Trains on an entire dataset read from file, for a period of time using the Cascade2 training algorithm. |
| fann_clear_scaling_params | Clears scaling parameters |
| fann_copy | Creates a copy of a fann structure |
| fann_create_from_file | Constructs a backpropagation neural network from a configuration file |
| fann_create_shortcut | Creates a standard backpropagation neural network which is not fully connectected and has shortcut connections |
| fann_create_shortcut_array | Creates a standard backpropagation neural network which is not fully connectected and has shortcut connections |
| fann_create_sparse | Creates a standard backpropagation neural network, which is not fully connected |
| fann_create_sparse_array | Creates a standard backpropagation neural network, which is not fully connected using an array of layer sizes |
| fann_create_standard | Creates a standard fully connected backpropagation neural network |
| fann_create_standard_array | Creates a standard fully connected backpropagation neural network using an array of layer sizes |
| fann_create_train | Creates an empty training data struct |
| fann_create_train_from_callback | Creates the training data struct from a user supplied function |
| fann_descale_input | Scale data in input vector after get it from ann based on previously calculated parameters |
| fann_descale_output | Scale data in output vector after get it from ann based on previously calculated parameters |
| fann_descale_train | Descale input and output data based on previously calculated parameters |
| fann_destroy | Destroys the entire network and properly freeing all the associated memory |
| fann_destroy_train | Destructs the training data |
| fann_duplicate_train_data | Returns an exact copy of a fann train data |
| fann_get_activation_function | Returns the activation function |
| fann_get_activation_steepness | Returns the activation steepness for supplied neuron and layer number |
| fann_get_bias_array | Get the number of bias in each layer in the network |
| fann_get_bit_fail | The number of fail bits |
| fann_get_bit_fail_limit | Returns the bit fail limit used during training |
| fann_get_cascade_activation_functions | Returns the cascade activation functions |
| fann_get_cascade_activation_functions_count | Returns the number of cascade activation functions |
| fann_get_cascade_activation_steepnesses | Returns the cascade activation steepnesses |
| fann_get_cascade_activation_steepnesses_count | The number of activation steepnesses |
| fann_get_cascade_candidate_change_fraction | Returns the cascade candidate change fraction |
| fann_get_cascade_candidate_limit | Return the candidate limit |
| fann_get_cascade_candidate_stagnation_epochs | Returns the number of cascade candidate stagnation epochs |
| fann_get_cascade_max_cand_epochs | Returns the maximum candidate epochs |
| fann_get_cascade_max_out_epochs | Returns the maximum out epochs |
| fann_get_cascade_min_cand_epochs | Returns the minimum candidate epochs |
| fann_get_cascade_min_out_epochs | Returns the minimum out epochs |
| fann_get_cascade_num_candidates | Returns the number of candidates used during training |
| fann_get_cascade_num_candidate_groups | Returns the number of candidate groups |
| fann_get_cascade_output_change_fraction | Returns the cascade output change fraction |
| fann_get_cascade_output_stagnation_epochs | Returns the number of cascade output stagnation epochs |
| fann_get_cascade_weight_multiplier | Returns the weight multiplier |
| fann_get_connection_array | Get connections in the network |
| fann_get_connection_rate | Get the connection rate used when the network was created |
| fann_get_errno | Returns the last error number |
| fann_get_errstr | Returns the last errstr |
| fann_get_layer_array | Get the number of neurons in each layer in the network |
| fann_get_learning_momentum | Returns the learning momentum |
| fann_get_learning_rate | Returns the learning rate |
| fann_get_MSE | Reads the mean square error from the network |
| fann_get_network_type | Get the type of neural network it was created as |
| fann_get_num_input | Get the number of input neurons |
| fann_get_num_layers | Get the number of layers in the neural network |
| fann_get_num_output | Get the number of output neurons |
| fann_get_quickprop_decay | Returns the decay which is a factor that weights should decrease in each iteration during quickprop training |
| fann_get_quickprop_mu | Returns the mu factor |
| fann_get_rprop_decrease_factor | Returns the increase factor used during RPROP training |
| fann_get_rprop_delta_max | Returns the maximum step-size |
| fann_get_rprop_delta_min | Returns the minimum step-size |
| fann_get_rprop_delta_zero | Returns the initial step-size |
| fann_get_rprop_increase_factor | Returns the increase factor used during RPROP training |
| fann_get_sarprop_step_error_shift | Returns the sarprop step error shift |
| fann_get_sarprop_step_error_threshold_factor | Returns the sarprop step error threshold factor |
| fann_get_sarprop_temperature | Returns the sarprop temperature |
| fann_get_sarprop_weight_decay_shift | Returns the sarprop weight decay shift |
| fann_get_total_connections | Get the total number of connections in the entire network |
| fann_get_total_neurons | Get the total number of neurons in the entire network |
| fann_get_training_algorithm | Returns the training algorithm |
| fann_get_train_error_function | Returns the error function used during training |
| fann_get_train_stop_function | Returns the stop function used during training |
| fann_init_weights | Initialize the weights using Widrow + Nguyen’s algorithm |
| fann_length_train_data | Returns the number of training patterns in the train data |
| fann_merge_train_data | Merges the train data |
| fann_num_input_train_data | Returns the number of inputs in each of the training patterns in the train data |
| fann_num_output_train_data | Returns the number of outputs in each of the training patterns in the train data |
| fann_print_error | Prints the error string |
| fann_randomize_weights | Give each connection a random weight between min_weight and max_weight |
| fann_read_train_from_file | Reads a file that stores training data |
| fann_reset_errno | Resets the last error number |
| fann_reset_errstr | Resets the last error string |
| fann_reset_MSE | Resets the mean square error from the network |
| fann_run | Will run input through the neural network |
| fann_save | Saves the entire network to a configuration file |
| fann_save_train | Save the training structure to a file |
| fann_scale_input | Scale data in input vector before feed it to ann based on previously calculated parameters |
| fann_scale_input_train_data | Scales the inputs in the training data to the specified range |
| fann_scale_output | Scale data in output vector before feed it to ann based on previously calculated parameters |
| fann_scale_output_train_data | Scales the outputs in the training data to the specified range |
| fann_scale_train | Scale input and output data based on previously calculated parameters |
| fann_scale_train_data | Scales the inputs and outputs in the training data to the specified range |
| fann_set_activation_function | Sets the activation function for supplied neuron and layer |
| fann_set_activation_function_hidden | Sets the activation function for all of the hidden layers |
| fann_set_activation_function_layer | Sets the activation function for all the neurons in the supplied layer. |
| fann_set_activation_function_output | Sets the activation function for the output layer |
| fann_set_activation_steepness | Sets the activation steepness for supplied neuron and layer number |
| fann_set_activation_steepness_hidden | Sets the steepness of the activation steepness for all neurons in the all hidden layers |
| fann_set_activation_steepness_layer | Sets the activation steepness for all of the neurons in the supplied layer number |
| fann_set_activation_steepness_output | Sets the steepness of the activation steepness in the output layer |
| fann_set_bit_fail_limit | Set the bit fail limit used during training |
| fann_set_callback | Sets the callback function for use during training |
| fann_set_cascade_activation_functions | Sets the array of cascade candidate activation functions |
| fann_set_cascade_activation_steepnesses | Sets the array of cascade candidate activation steepnesses |
| fann_set_cascade_candidate_change_fraction | Sets the cascade candidate change fraction |
| fann_set_cascade_candidate_limit | Sets the candidate limit |
| fann_set_cascade_candidate_stagnation_epochs | Sets the number of cascade candidate stagnation epochs |
| fann_set_cascade_max_cand_epochs | Sets the max candidate epochs |
| fann_set_cascade_max_out_epochs | Sets the maximum out epochs |
| fann_set_cascade_min_cand_epochs | Sets the min candidate epochs |
| fann_set_cascade_min_out_epochs | Sets the minimum out epochs |
| fann_set_cascade_num_candidate_groups | Sets the number of candidate groups |
| fann_set_cascade_output_change_fraction | Sets the cascade output change fraction |
| fann_set_cascade_output_stagnation_epochs | Sets the number of cascade output stagnation epochs |
| fann_set_cascade_weight_multiplier | Sets the weight multiplier |
| fann_set_error_log | Sets where the errors are logged to |
| fann_set_input_scaling_params | Calculate input scaling parameters for future use based on training data |
| fann_set_learning_momentum | Sets the learning momentum |
| fann_set_learning_rate | Sets the learning rate |
| fann_set_output_scaling_params | Calculate output scaling parameters for future use based on training data |
| fann_set_quickprop_decay | Sets the quickprop decay factor |
| fann_set_quickprop_mu | Sets the quickprop mu factor |
| fann_set_rprop_decrease_factor | Sets the decrease factor used during RPROP training |
| fann_set_rprop_delta_max | Sets the maximum step-size |
| fann_set_rprop_delta_min | Sets the minimum step-size |
| fann_set_rprop_delta_zero | Sets the initial step-size |
| fann_set_rprop_increase_factor | Sets the increase factor used during RPROP training |
| fann_set_sarprop_step_error_shift | Sets the sarprop step error shift |
| fann_set_sarprop_step_error_threshold_factor | Sets the sarprop step error threshold factor |
| fann_set_sarprop_temperature | Sets the sarprop temperature |
| fann_set_sarprop_weight_decay_shift | Sets the sarprop weight decay shift |
| fann_set_scaling_params | Calculate input and output scaling parameters for future use based on training data |
| fann_set_training_algorithm | Sets the training algorithm |
| fann_set_train_error_function | Sets the error function used during training |
| fann_set_train_stop_function | Sets the stop function used during training |
| fann_set_weight | Set a connection in the network |
| fann_set_weight_array | Set connections in the network |
| fann_shuffle_train_data | Shuffles training data, randomizing the order |
| fann_subset_train_data | Returns an copy of a subset of the train data |
| fann_test | Test with a set of inputs, and a set of desired outputs |
| fann_test_data | Test a set of training data and calculates the MSE for the training data |
| fann_train | Train one iteration with a set of inputs, and a set of desired outputs |
| fann_train_epoch | Train one epoch with a set of training data |
| fann_train_on_data | Trains on an entire dataset for a period of time |
| fann_train_on_file | Trains on an entire dataset, which is read from file, for a period of time |
| fastcgi_finish_request | 冲刷(flush)所有响应的数据给客户端 |
| fbsql_affected_rows | Get number of affected rows in previous FrontBase operation |
| fbsql_autocommit | Enable or disable autocommit |
| fbsql_blob_size | Get the size of a BLOB |
| fbsql_change_user | Change logged in user of the active connection |
| fbsql_clob_size | Get the size of a CLOB |
| fbsql_close | Close FrontBase connection |
| fbsql_commit | Commits a transaction to the database |
| fbsql_connect | Open a connection to a FrontBase Server |
| fbsql_create_blob | Create a BLOB |
| fbsql_create_clob | Create a CLOB |
| fbsql_create_db | Create a FrontBase database |
| fbsql_database | Get or set the database name used with a connection |
| fbsql_database_password | Sets or retrieves the password for a FrontBase database |
| fbsql_data_seek | Move internal result pointer |
| fbsql_db_query | Send a FrontBase query |
| fbsql_db_status | Get the status for a given database |
| fbsql_drop_db | Drop (delete) a FrontBase database |
| fbsql_errno | Returns the error number from previous operation |
| fbsql_error | Returns the error message from previous operation |
| fbsql_fetch_array | Fetch a result row as an associative array, a numeric array, or both |
| fbsql_fetch_assoc | Fetch a result row as an associative array |
| fbsql_fetch_field | Get column information from a result and return as an object |
| fbsql_fetch_lengths | Get the length of each output in a result |
| fbsql_fetch_object | Fetch a result row as an object |
| fbsql_fetch_row | Get a result row as an enumerated array |
| fbsql_field_flags | Get the flags associated with the specified field in a result |
| fbsql_field_len | Returns the length of the specified field |
| fbsql_field_name | Get the name of the specified field in a result |
| fbsql_field_seek | Set result pointer to a specified field offset |
| fbsql_field_table | Get name of the table the specified field is in |
| fbsql_field_type | Get the type of the specified field in a result |
| fbsql_free_result | Free result memory |
| fbsql_get_autostart_info | 说明 |
| fbsql_hostname | Get or set the host name used with a connection |
| fbsql_insert_id | Get the id generated from the previous INSERT operation |
| fbsql_list_dbs | List databases available on a FrontBase server |
| fbsql_list_fields | List FrontBase result fields |
| fbsql_list_tables | List tables in a FrontBase database |
| fbsql_next_result | Move the internal result pointer to the next result |
| fbsql_num_fields | Get number of fields in result |
| fbsql_num_rows | Get number of rows in result |
| fbsql_password | Get or set the user password used with a connection |
| fbsql_pconnect | Open a persistent connection to a FrontBase Server |
| fbsql_query | Send a FrontBase query |
| fbsql_read_blob | Read a BLOB from the database |
| fbsql_read_clob | Read a CLOB from the database |
| fbsql_result | Get result data |
| fbsql_rollback | Rollback a transaction to the database |
| fbsql_rows_fetched | Get the number of rows affected by the last statement |
| fbsql_select_db | Select a FrontBase database |
| fbsql_set_characterset | Change input/output character set |
| fbsql_set_lob_mode | Set the LOB retrieve mode for a FrontBase result set |
| fbsql_set_password | Change the password for a given user |
| fbsql_set_transaction | Set the transaction locking and isolation |
| fbsql_start_db | Start a database on local or remote server |
| fbsql_stop_db | Stop a database on local or remote server |
| fbsql_tablename | 别名 fbsql_table_name |
| fbsql_table_name | Get table name of field |
| fbsql_username | Get or set the username for the connection |
| fbsql_warnings | Enable or disable FrontBase warnings |
| fclose | 关闭一个已打开的文件指针 |
| fdf_add_doc_javascript | Adds javascript code to the FDF document |
| fdf_add_template | Adds a template into the FDF document |
| fdf_close | Close an FDF document |
| fdf_create | Create a new FDF document |
| fdf_enum_values | Call a user defined function for each document value |
| fdf_errno | Return error code for last fdf operation |
| fdf_error | Return error description for FDF error code |
| fdf_get_ap | Get the appearance of a field |
| fdf_get_attachment | Extracts uploaded file embedded in the FDF |
| fdf_get_encoding | Get the value of the /Encoding key |
| fdf_get_file | Get the value of the /F key |
| fdf_get_flags | Gets the flags of a field |
| fdf_get_opt | Gets a value from the opt array of a field |
| fdf_get_status | Get the value of the /STATUS key |
| fdf_get_value | Get the value of a field |
| fdf_get_version | Gets version number for FDF API or file |
| fdf_header | Sets FDF-specific output headers |
| fdf_next_field_name | Get the next field name |
| fdf_open | Open a FDF document |
| fdf_open_string | Read a FDF document from a string |
| fdf_remove_item | Sets target frame for form |
| fdf_save | Save a FDF document |
| fdf_save_string | Returns the FDF document as a string |
| fdf_set_ap | Set the appearance of a field |
| fdf_set_encoding | Sets FDF character encoding |
| fdf_set_file | Set PDF document to display FDF data in |
| fdf_set_flags | Sets a flag of a field |
| fdf_set_javascript_action | Sets an javascript action of a field |
| fdf_set_on_import_javascript | Adds javascript code to be executed when Acrobat opens the FDF |
| fdf_set_opt | Sets an option of a field |
| fdf_set_status | Set the value of the /STATUS key |
| fdf_set_submit_form_action | Sets a submit form action of a field |
| fdf_set_target_frame | Set target frame for form display |
| fdf_set_value | Set the value of a field |
| fdf_set_version | Sets version number for a FDF file |
| feof | 测试文件指针是否到了文件结束的位置 |
| fflush | 将缓冲内容输出到文件 |
| fgetc | 从文件指针中读取字符 |
| fgetcsv | 从文件指针中读入一行并解析 CSV 字段 |
| fgets | 从文件指针中读取一行 |
| fgetss | 从文件指针中读取一行并过滤掉 HTML 标记 |
| file | 把整个文件读入一个数组中 |
| fileatime | 取得文件的上次访问时间 |
| filectime | 取得文件的 inode 修改时间 |
| filegroup | 取得文件的组 |
| fileinode | 取得文件的 inode |
| filemtime | 取得文件修改时间 |
| fileowner | 取得文件的所有者 |
| fileperms | 取得文件的权限 |
| filepro | Read and verify the map file |
| filepro_fieldcount | Find out how many fields are in a filePro database |
| filepro_fieldname | Gets the name of a field |
| filepro_fieldtype | Gets the type of a field |
| filepro_fieldwidth | Gets the width of a field |
| filepro_retrieve | Retrieves data from a filePro database |
| filepro_rowcount | Find out how many rows are in a filePro database |
| filesize | 取得文件大小 |
| filetype | 取得文件类型 |
| file_exists | 检查文件或目录是否存在 |
| file_get_contents | 将整个文件读入一个字符串 |
| file_put_contents | 将一个字符串写入文件 |
| filter_has_var | Checks if variable of specified type exists |
| filter_id | 返回与某个特定名称的过滤器相关联的id |
| filter_input | 通过名称获取特定的外部变量，并且可以通过过滤器处理它 |
| filter_input_array | 获取一系列外部变量，并且可以通过过滤器处理它们 |
| filter_list | 返回所支持的过滤器列表 |
| filter_var | 使用特定的过滤器过滤一个变量 |
| filter_var_array | 获取多个变量并且过滤它们 |
| finfo_close | 关闭 fileinfo 资源 |
| finfo_open | 创建一个 fileinfo 资源 |
| floatval | 获取变量的浮点值 |
| flock | 轻便的咨询文件锁定 |
| floor | 舍去法取整 |
| flush | 刷新输出缓冲 |
| fmod | 返回除法的浮点数余数 |
| fnmatch | 用模式匹配文件名 |
| fopen | 打开文件或者 URL |
| forward_static_call | Call a static method |
| forward_static_call_array | Call a static method and pass the arguments as array |
| fpassthru | 输出文件指针处的所有剩余数据 |
| fprintf | 将格式化后的字符串写入到流 |
| fputcsv | 将行格式化为 CSV 并写入文件指针 |
| fputs | fwrite 的别名 |
| fread | 读取文件（可安全用于二进制文件） |
| FrenchToJD | 从一个French Republican历法的日期得到Julian Day计数。 |
| fribidi_log2vis | Convert a logical string to a visual one |
| fscanf | 从文件中格式化输入 |
| fseek | 在文件指针中定位 |
| fsockopen | 打开一个网络连接或者一个Unix套接字连接 |
| fstat | 通过已打开的文件指针取得文件信息 |
| ftell | 返回文件指针读/写的位置 |
| ftok | Convert a pathname and a project identifier to a System V IPC key |
| FTP context options | FTP context option listing |
| ftp_alloc | 为要上传的文件分配空间 |
| ftp_cdup | 切换到当前目录的父目录 |
| ftp_chdir | 在 FTP 服务器上改变当前目录 |
| ftp_chmod | 设置 FTP 服务器上的文件权限 |
| ftp_close | 关闭一个 FTP 连接 |
| ftp_connect | 建立一个新的 FTP 连接 |
| ftp_delete | 删除 FTP 服务器上的一个文件 |
| ftp_exec | 请求运行一条 FTP 命令 |
| ftp_fget | 从 FTP 服务器上下载一个文件并保存到本地一个已经打开的文件中 |
| ftp_fput | 上传一个已经打开的文件到 FTP 服务器 |
| ftp_get | 从 FTP 服务器上下载一个文件 |
| ftp_get_option | 返回当前 FTP 连接的各种不同的选项设置 |
| ftp_login | 登录 FTP 服务器 |
| ftp_mdtm | 返回指定文件的最后修改时间 |
| ftp_mkdir | 建立新目录 |
| ftp_nb_continue | 连续获取／发送文件（non-blocking） |
| ftp_nb_fget | 从 FTP 服务器获取文件并写入到一个打开的文件（非阻塞） |
| ftp_nb_fput | 将文件存储到 FTP 服务器 （非阻塞） |
| ftp_nb_get | 从 FTP 服务器上获取文件并写入本地文件（non-blocking） |
| ftp_nb_put | 存储一个文件至 FTP 服务器（non-blocking） |
| ftp_nlist | 返回给定目录的文件列表 |
| ftp_pasv | 返回当前 FTP 被动模式是否打开 |
| ftp_put | 上传文件到 FTP 服务器 |
| ftp_pwd | 返回当前目录名 |
| ftp_quit | ftp_close 的 别名 |
| ftp_raw | 向 FTP 服务器发送命令 |
| ftp_rawlist | 返回指定目录下文件的详细列表 |
| ftp_rename | 更改 FTP 服务器上的文件或目录名 |
| ftp_rmdir | 删除 FTP 服务器上的一个目录 |
| ftp_set_option | 设置各种 FTP 运行时选项 |
| ftp_site | 向服务器发送 SITE 命令 |
| ftp_size | 返回指定文件的大小 |
| ftp_ssl_connect | 打开 SSL-FTP 连接 |
| ftp_systype | 返回远程 FTP 服务器的操作系统类型 |
| ftruncate | 将文件截断到给定的长度 |
| function_exists | 如果给定的函数已经被定义就返回 TRUE |
| func_get_arg | 返回参数列表的某一项 |
| func_get_args | 返回一个包含函数参数列表的数组 |
| func_num_args | Returns the number of arguments passed to the function |
| fwrite | 写入文件（可安全用于二进制文件） |
g
| 函数 | 说明 |
|---|---|
| gc_collect_cycles | 强制收集所有现存的垃圾循环周期 |
| gc_disable | 停用循环引用收集器 |
| gc_enable | 激活循环引用收集器 |
| gc_enabled | 返回循环引用计数器的状态 |
| gc_mem_caches | Reclaims memory used by the Zend Engine memory manager |
| gd_info | 取得当前安装的 GD 库的信息 |
| geoip_asnum_by_name | Get the Autonomous System Numbers (ASN) |
| geoip_continent_code_by_name | Get the two letter continent code |
| geoip_country_code3_by_name | Get the three letter country code |
| geoip_country_code_by_name | Get the two letter country code |
| geoip_country_name_by_name | Get the full country name |
| geoip_database_info | Get GeoIP Database information |
| geoip_db_avail | Determine if GeoIP Database is available |
| geoip_db_filename | Returns the filename of the corresponding GeoIP Database |
| geoip_db_get_all_info | Returns detailed information about all GeoIP database types |
| geoip_domain_by_name | Get the second level domain name |
| geoip_id_by_name | Get the Internet connection type |
| geoip_isp_by_name | Get the Internet Service Provider (ISP) name |
| geoip_netspeedcell_by_name | Get the Internet connection speed |
| geoip_org_by_name | Get the organization name |
| geoip_record_by_name | Returns the detailed City information found in the GeoIP Database |
| geoip_region_by_name | Get the country code and region |
| geoip_region_name_by_code | Returns the region name for some country and region code combo |
| geoip_setup_custom_directory | Set a custom directory for the GeoIP database. |
| geoip_time_zone_by_country_and_region | Returns the time zone for some country and region code combo |
| getallheaders | 获取全部 HTTP 请求头信息 |
| getcwd | 取得当前工作目录 |
| getdate | 取得日期／时间信息 |
| getenv | 获取一个环境变量的值 |
| gethostbyaddr | 获取指定的IP地址对应的主机名 |
| gethostbyname | Get the IPv4 address corresponding to a given Internet host name |
| gethostbynamel | Get a list of IPv4 addresses corresponding to a given Internet host name |
| gethostname | Gets the host name |
| getimagesize | 取得图像大小 |
| getimagesizefromstring | 从字符串中获取图像尺寸信息 |
| getlastmod | 获取页面最后修改的时间 |
| getmxrr | Get MX records corresponding to a given Internet host name |
| getmygid | 获取当前 PHP 脚本拥有者的 GID |
| getmyinode | 获取当前脚本的索引节点（inode） |
| getmypid | 获取 PHP 进程的 ID |
| getmyuid | 获取 PHP 脚本所有者的 UID |
| getopt | 从命令行参数列表中获取选项 |
| getprotobyname | Get protocol number associated with protocol name |
| getprotobynumber | Get protocol name associated with protocol number |
| getrandmax | 显示随机数最大的可能值 |
| getrusage | 获取当前资源使用状况 |
| getservbyname | Get port number associated with an Internet service and protocol |
| getservbyport | Get Internet service which corresponds to port and protocol |
| gettext | Lookup a message in the current domain |
| gettimeofday | 取得当前时间 |
| gettype | 获取变量的类型 |
| get_browser | 获取浏览器具有的功能 |
| get_called_class | 后期静态绑定（”Late Static Binding”）类的名称 |
| get_cfg_var | 获取 PHP 配置选项的值 |
| get_class | 返回对象的类名 |
| get_class_methods | 返回由类的方法名组成的数组 |
| get_class_vars | 返回由类的默认属性组成的数组 |
| get_current_user | 获取当前 PHP 脚本所有者名称 |
| get_declared_classes | 返回由已定义类的名字所组成的数组 |
| get_declared_interfaces | 返回一个数组包含所有已声明的接口 |
| get_declared_traits | 返回所有已定义的 traits 的数组 |
| get_defined_constants | 返回所有常量的关联数组，键是常量名，值是常量值 |
| get_defined_functions | Returns an array of all defined functions |
| get_defined_vars | 返回由所有已定义变量所组成的数组 |
| get_extension_funcs | 返回模块函数名称的数组 |
| get_headers | 取得服务器响应一个 HTTP 请求所发送的所有标头 |
| get_html_translation_table | 返回使用 htmlspecialchars 和 htmlentities 后的转换表 |
| get_included_files | 返回被 include 和 require 文件名的 array |
| get_include_path | 获取当前的 include_path 配置选项 |
| get_loaded_extensions | 返回所有编译并加载模块名的 array |
| get_magic_quotes_gpc | 获取当前 magic_quotes_gpc 的配置选项设置 |
| get_magic_quotes_runtime | 获取当前 magic_quotes_runtime 配置选项的激活状态 |
| get_meta_tags | 从一个文件中提取所有的 meta 标签 content 属性，返回一个数组 |
| get_object_vars | 返回由对象属性组成的关联数组 |
| get_parent_class | 返回对象或类的父类名 |
| get_required_files | 别名 get_included_files |
| get_resources | Returns active resources |
| get_resource_type | 返回资源（resource）类型 |
| glob | 寻找与模式匹配的文件路径 |
| gmdate | 格式化一个 GMT/UTC 日期／时间 |
| gmmktime | 取得 GMT 日期的 UNIX 时间戳 |
| gmp_abs | Absolute value |
| gmp_add | Add numbers |
| gmp_and | Bitwise AND |
| gmp_clrbit | Clear bit |
| gmp_cmp | Compare numbers |
| gmp_com | Calculates one’s complement |
| gmp_div | 别名 gmp_div_q |
| gmp_divexact | Exact division of numbers |
| gmp_div_q | Divide numbers |
| gmp_div_qr | Divide numbers and get quotient and remainder |
| gmp_div_r | Remainder of the division of numbers |
| gmp_export | Export to a binary string |
| gmp_fact | Factorial |
| gmp_gcd | Calculate GCD |
| gmp_gcdext | Calculate GCD and multipliers |
| gmp_hamdist | Hamming distance |
| gmp_import | Import from a binary string |
| gmp_init | Create GMP number |
| gmp_intval | Convert GMP number to integer |
| gmp_invert | Inverse by modulo |
| gmp_jacobi | Jacobi symbol |
| gmp_legendre | Legendre symbol |
| gmp_mod | Modulo operation |
| gmp_mul | Multiply numbers |
| gmp_neg | Negate number |
| gmp_nextprime | Find next prime number |
| gmp_or | Bitwise OR |
| gmp_perfect_square | Perfect square check |
| gmp_popcount | Population count |
| gmp_pow | Raise number into power |
| gmp_powm | Raise number into power with modulo |
| gmp_prob_prime | Check if number is “probably prime” |
| gmp_random | Random number |
| gmp_random_bits | Random number |
| gmp_random_range | Random number |
| gmp_random_seed | Sets the RNG seed |
| gmp_root | Take the integer part of nth root |
| gmp_rootrem | Take the integer part and remainder of nth root |
| gmp_scan0 | Scan for 0 |
| gmp_scan1 | Scan for 1 |
| gmp_setbit | Set bit |
| gmp_sign | Sign of number |
| gmp_sqrt | Calculate square root |
| gmp_sqrtrem | Square root with remainder |
| gmp_strval | Convert GMP number to string |
| gmp_sub | Subtract numbers |
| gmp_testbit | Tests if a bit is set |
| gmp_xor | Bitwise XOR |
| gmstrftime | 根据区域设置格式化 GMT/UTC 时间／日期 |
| gnupg_adddecryptkey | Add a key for decryption |
| gnupg_addencryptkey | Add a key for encryption |
| gnupg_addsignkey | Add a key for signing |
| gnupg_cleardecryptkeys | Removes all keys which were set for decryption before |
| gnupg_clearencryptkeys | Removes all keys which were set for encryption before |
| gnupg_clearsignkeys | Removes all keys which were set for signing before |
| gnupg_decrypt | Decrypts a given text |
| gnupg_decryptverify | Decrypts and verifies a given text |
| gnupg_encrypt | Encrypts a given text |
| gnupg_encryptsign | Encrypts and signs a given text |
| gnupg_export | Exports a key |
| gnupg_geterror | Returns the errortext, if a function fails |
| gnupg_getprotocol | Returns the currently active protocol for all operations |
| gnupg_import | Imports a key |
| gnupg_init | Initialize a connection |
| gnupg_keyinfo | Returns an array with information about all keys that matches the given pattern |
| gnupg_setarmor | Toggle armored output |
| gnupg_seterrormode | Sets the mode for error_reporting |
| gnupg_setsignmode | Sets the mode for signing |
| gnupg_sign | Signs a given text |
| gnupg_verify | Verifies a signed text |
| gopher_parsedir | Translate a gopher formatted directory entry into an associative array. |
| grapheme_extract | Function to extract a sequence of default grapheme clusters from a text buffer, which must be encoded in UTF-8. |
| grapheme_stripos | Find position (in grapheme units) of first occurrence of a case-insensitive string |
| grapheme_stristr | Returns part of haystack string from the first occurrence of case-insensitive needle to the end of haystack. |
| grapheme_strlen | Get string length in grapheme units |
| grapheme_strpos | Find position (in grapheme units) of first occurrence of a string |
| grapheme_strripos | Find position (in grapheme units) of last occurrence of a case-insensitive string |
| grapheme_strrpos | Find position (in grapheme units) of last occurrence of a string |
| grapheme_strstr | Returns part of haystack string from the first occurrence of needle to the end of haystack. |
| grapheme_substr | Return part of a string |
| GregorianToJD | 转变一个Gregorian历法日期到Julian Day计数 |
| gupnp_context_get_host_ip | Get the IP address |
| gupnp_context_get_port | Get the port |
| gupnp_context_get_subscription_timeout | Get the event subscription timeout |
| gupnp_context_host_path | Start hosting |
| gupnp_context_new | Create a new context |
| gupnp_context_set_subscription_timeout | Sets the event subscription timeout |
| gupnp_context_timeout_add | Sets a function to be called at regular intervals |
| gupnp_context_unhost_path | Stop hosting |
| gupnp_control_point_browse_start | Start browsing |
| gupnp_control_point_browse_stop | Stop browsing |
| gupnp_control_point_callback_set | Set control point callback |
| gupnp_control_point_new | Create a new control point |
| gupnp_device_action_callback_set | Set device callback function |
| gupnp_device_info_get | Get info of root device |
| gupnp_device_info_get_service | Get the service with type |
| gupnp_root_device_get_available | Check whether root device is available |
| gupnp_root_device_get_relative_location | Get the relative location of root device. |
| gupnp_root_device_new | Create a new root device |
| gupnp_root_device_set_available | Set whether or not root_device is available |
| gupnp_root_device_start | Start main loop |
| gupnp_root_device_stop | Stop main loop |
| gupnp_service_action_get | Retrieves the specified action arguments |
| gupnp_service_action_return | Return successfully |
| gupnp_service_action_return_error | Return error code |
| gupnp_service_action_set | Sets the specified action return values |
| gupnp_service_freeze_notify | Freeze new notifications |
| gupnp_service_info_get | Get full info of service |
| gupnp_service_info_get_introspection | Get resource introspection of service |
| gupnp_service_introspection_get_state_variable | Returns the state variable data |
| gupnp_service_notify | Notifies listening clients |
| gupnp_service_proxy_action_get | Send action to the service and get value |
| gupnp_service_proxy_action_set | Send action to the service and set value |
| gupnp_service_proxy_add_notify | Sets up callback for variable change notification |
| gupnp_service_proxy_callback_set | Set service proxy callback for signal |
| gupnp_service_proxy_get_subscribed | Check whether subscription is valid to the service |
| gupnp_service_proxy_remove_notify | Cancels the variable change notification |
| gupnp_service_proxy_send_action | Send action with multiple parameters synchronously |
| gupnp_service_proxy_set_subscribed | (Un)subscribes to the service. |
| gupnp_service_thaw_notify | Sends out any pending notifications and stops queuing of new ones. |
| gzclose | Close an open gz-file pointer |
| gzcompress | Compress a string |
| gzdecode | Decodes a gzip compressed string |
| gzdeflate | Deflate a string |
| gzencode | Create a gzip compressed string |
| gzeof | Test for EOF on a gz-file pointer |
| gzfile | Read entire gz-file into an array |
| gzgetc | Get character from gz-file pointer |
| gzgets | Get line from file pointer |
| gzgetss | Get line from gz-file pointer and strip HTML tags |
| gzinflate | Inflate a deflated string |
| gzopen | Open gz-file |
| gzpassthru | Output all remaining data on a gz-file pointer |
| gzputs | 别名 gzwrite |
| gzread | Binary-safe gz-file read |
| gzrewind | Rewind the position of a gz-file pointer |
| gzseek | Seek on a gz-file pointer |
| gztell | Tell gz-file pointer read/write position |
| gzuncompress | Uncompress a compressed string |
| gzwrite | Binary-safe gz-file write |
h
| 函数 | 说明 |
|---|---|
| hash | 生成哈希值 （消息摘要） |
| hash_algos | 返回已注册的哈希算法列表 |
| hash_copy | 拷贝哈希运算上下文 |
| hash_equals | 可防止时序攻击的字符串比较 |
| hash_file | 使用给定文件的内容生成哈希值 |
| hash_final | 结束增量哈希，并且返回摘要结果 |
| hash_hmac | 使用 HMAC 方法生成带有密钥的哈希值 |
| hash_hmac_file | 使用 HMAC 方法和给定文件的内容生成带密钥的哈希值 |
| hash_init | 初始化增量哈希运算上下文 |
| hash_pbkdf2 | 生成所提供密码的 PBKDF2 密钥导出 |
| hash_update | 向活跃的哈希运算上下文中填充数据 |
| hash_update_file | 从文件向活跃的哈希运算上下文中填充数据 |
| hash_update_stream | 从打开的流向活跃的哈希运算上下文中填充数据 |
| header | 发送原生 HTTP 头 |
| headers_list | Returns a list of response headers sent (or ready to send) |
| headers_sent | Checks if or where headers have been sent |
| header_register_callback | Call a header function |
| header_remove | Remove previously set headers |
| hebrev | 将逻辑顺序希伯来文（logical-Hebrew）转换为视觉顺序希伯来文（visual-Hebrew） |
| hebrevc | 将逻辑顺序希伯来文（logical-Hebrew）转换为视觉顺序希伯来文（visual-Hebrew），并且转换换行符 |
| hex2bin | 转换十六进制字符串为二进制字符串 |
| hexdec | 十六进制转换为十进制 |
| highlight_file | 语法高亮一个文件 |
| highlight_string | 字符串的语法高亮 |
| htmlentities | Convert all applicable characters to HTML entities |
| htmlspecialchars | Convert special characters to HTML entities |
| htmlspecialchars_decode | 将特殊的 HTML 实体转换回普通字符 |
| html_entity_decode | Convert all HTML entities to their applicable characters |
| HTTP context 选项 | HTTP context 的选项列表 |
| http_build_cookie | Build cookie string |
| http_build_query | 生成 URL-encode 之后的请求字符串 |
| http_build_str | 产生一个查询字符串 |
| http_build_url | 产生一个 URL |
| http_cache_etag | Caching by ETag |
| http_cache_last_modified | Caching by last modification |
| http_chunked_decode | Decode chunked-encoded data |
| http_date | Compose HTTP RFC compliant date |
| http_deflate | Deflate data |
| http_get | Perform GET request |
| http_get_request_body | Get request body as string |
| http_get_request_body_stream | Get request body as stream |
| http_get_request_headers | Get request headers as array |
| http_head | Perform HEAD request |
| http_inflate | Inflate data |
| http_match_etag | Match ETag |
| http_match_modified | Match last modification |
| http_match_request_header | Match any header |
| http_negotiate_charset | Negotiate client’s preferred character set |
| http_negotiate_content_type | Negotiate client’s preferred content type |
| http_negotiate_language | Negotiate client’s preferred language |
| http_parse_cookie | Parse HTTP cookie |
| http_parse_headers | Parse HTTP headers |
| http_parse_message | Parse HTTP messages |
| http_parse_params | Parse parameter list |
| http_persistent_handles_clean | Clean up persistent handles |
| http_persistent_handles_count | Stat persistent handles |
| http_persistent_handles_ident | Get/set ident of persistent handles |
| http_post_data | Perform POST request with pre-encoded data |
| http_post_fields | Perform POST request with data to be encoded |
| http_put_data | Perform PUT request with data |
| http_put_file | Perform PUT request with file |
| http_put_stream | Perform PUT request with stream |
| http_redirect | Issue HTTP redirect |
| http_request | Perform custom request |
| http_request_body_encode | Encode request body |
| http_request_method_exists | Check whether request method exists |
| http_request_method_name | Get request method name |
| http_request_method_register | Register request method |
| http_request_method_unregister | Unregister request method |
| http_response_code | Get or Set the HTTP response code |
| http_send_content_disposition | Send Content-Disposition |
| http_send_content_type | Send Content-Type |
| http_send_data | Send arbitrary data |
| http_send_file | Send file |
| http_send_last_modified | Send Last-Modified |
| http_send_status | Send HTTP response status |
| http_send_stream | Send stream |
| http_support | Check built-in HTTP support |
| http_throttle | HTTP throttling |
| hwapi_attribute_new | Creates instance of class hw_api_attribute |
| hwapi_content_new | Create new instance of class hw_api_content |
| hwapi_hgcsp | Returns object of class hw_api |
| hwapi_object_new | Creates a new instance of class hwapi_object_new |
| hypot | 计算一直角三角形的斜边长度 |
i
| 函数 | 说明 |
|---|---|
| ibase_add_user | Add a user to a security database |
| ibase_affected_rows | Return the number of rows that were affected by the previous query |
| ibase_backup | Initiates a backup task in the service manager and returns immediately |
| ibase_blob_add | Add data into a newly created blob |
| ibase_blob_cancel | Cancel creating blob |
| ibase_blob_close | Close blob |
| ibase_blob_create | Create a new blob for adding data |
| ibase_blob_echo | Output blob contents to browser |
| ibase_blob_get | Get len bytes data from open blob |
| ibase_blob_import | Create blob, copy file in it, and close it |
| ibase_blob_info | Return blob length and other useful info |
| ibase_blob_open | Open blob for retrieving data parts |
| ibase_close | Close a connection to an InterBase database |
| ibase_commit | Commit a transaction |
| ibase_commit_ret | Commit a transaction without closing it |
| ibase_connect | Open a connection to a database |
| ibase_db_info | Request statistics about a database |
| ibase_delete_user | Delete a user from a security database |
| ibase_drop_db | Drops a database |
| ibase_errcode | Return an error code |
| ibase_errmsg | Return error messages |
| ibase_execute | Execute a previously prepared query |
| ibase_fetch_assoc | Fetch a result row from a query as an associative array |
| ibase_fetch_object | Get an object from a InterBase database |
| ibase_fetch_row | Fetch a row from an InterBase database |
| ibase_field_info | Get information about a field |
| ibase_free_event_handler | Cancels a registered event handler |
| ibase_free_query | Free memory allocated by a prepared query |
| ibase_free_result | Free a result set |
| ibase_gen_id | Increments the named generator and returns its new value |
| ibase_maintain_db | Execute a maintenance command on the database server |
| ibase_modify_user | Modify a user to a security database |
| ibase_name_result | Assigns a name to a result set |
| ibase_num_fields | Get the number of fields in a result set |
| ibase_num_params | Return the number of parameters in a prepared query |
| ibase_param_info | Return information about a parameter in a prepared query |
| ibase_pconnect | Open a persistent connection to an InterBase database |
| ibase_prepare | Prepare a query for later binding of parameter placeholders and execution |
| ibase_query | Execute a query on an InterBase database |
| ibase_restore | Initiates a restore task in the service manager and returns immediately |
| ibase_rollback | Roll back a transaction |
| ibase_rollback_ret | Roll back a transaction without closing it |
| ibase_server_info | Request information about a database server |
| ibase_service_attach | Connect to the service manager |
| ibase_service_detach | Disconnect from the service manager |
| ibase_set_event_handler | Register a callback function to be called when events are posted |
| ibase_trans | Begin a transaction |
| ibase_wait_event | Wait for an event to be posted by the database |
| iconv | 字符串按要求的字符编码来转换 |
| iconv_get_encoding | 获取 iconv 扩展的内部配置变量 |
| iconv_mime_decode | Decodes a MIME header field |
| iconv_mime_decode_headers | 一次性解码多个 MIME 头字段 |
| iconv_mime_encode | Composes a MIME header field |
| iconv_set_encoding | 为字符编码转换设定当前设置 |
| iconv_strlen | 返回字符串的字符数统计 |
| iconv_strpos | Finds position of first occurrence of a needle within a haystack |
| iconv_strrpos | Finds the last occurrence of a needle within a haystack |
| iconv_substr | 截取字符串的部分 |
| id3_get_frame_long_name | Get the long name of an ID3v2 frame |
| id3_get_frame_short_name | Get the short name of an ID3v2 frame |
| id3_get_genre_id | Get the id for a genre |
| id3_get_genre_list | Get all possible genre values |
| id3_get_genre_name | Get the name for a genre id |
| id3_get_tag | Get all information stored in an ID3 tag |
| id3_get_version | Get version of an ID3 tag |
| id3_remove_tag | Remove an existing ID3 tag |
| id3_set_tag | Update information stored in an ID3 tag |
| idate | 将本地时间日期格式化为整数 |
| idn_to_ascii | Convert domain name to IDNA ASCII form. |
| idn_to_unicode | 别名 idn_to_utf8 |
| idn_to_utf8 | Convert domain name from IDNA ASCII to Unicode. |
| ifxus_close_slob | Deletes the slob object |
| ifxus_create_slob | Creates an slob object and opens it |
| ifxus_free_slob | Deletes the slob object |
| ifxus_open_slob | Opens an slob object |
| ifxus_read_slob | Reads nbytes of the slob object |
| ifxus_seek_slob | Sets the current file or seek position |
| ifxus_tell_slob | Returns the current file or seek position |
| ifxus_write_slob | Writes a string into the slob object |
| ifx_affected_rows | Get number of rows affected by a query |
| ifx_blobinfile_mode | Set the default blob mode for all select queries |
| ifx_byteasvarchar | Set the default byte mode |
| ifx_close | Close Informix connection |
| ifx_connect | Open Informix server connection |
| ifx_copy_blob | Duplicates the given blob object |
| ifx_create_blob | Creates an blob object |
| ifx_create_char | Creates an char object |
| ifx_do | Execute a previously prepared SQL-statement |
| ifx_error | Returns error code of last Informix call |
| ifx_errormsg | Returns error message of last Informix call |
| ifx_fetch_row | Get row as an associative array |
| ifx_fieldproperties | List of SQL fieldproperties |
| ifx_fieldtypes | List of Informix SQL fields |
| ifx_free_blob | Deletes the blob object |
| ifx_free_char | Deletes the char object |
| ifx_free_result | Releases resources for the query |
| ifx_getsqlca | Get the contents of sqlca.sqlerrd[0..5] after a query |
| ifx_get_blob | Return the content of a blob object |
| ifx_get_char | Return the content of the char object |
| ifx_htmltbl_result | Formats all rows of a query into a HTML table |
| ifx_nullformat | Sets the default return value on a fetch row |
| ifx_num_fields | Returns the number of columns in the query |
| ifx_num_rows | Count the rows already fetched from a query |
| ifx_pconnect | Open persistent Informix connection |
| ifx_prepare | Prepare an SQL-statement for execution |
| ifx_query | Send Informix query |
| ifx_textasvarchar | Set the default text mode |
| ifx_update_blob | Updates the content of the blob object |
| ifx_update_char | Updates the content of the char object |
| ignore_user_abort | 设置客户端断开连接时是否中断脚本的执行 |
| iis_add_server | Creates a new virtual web server |
| iis_get_dir_security | Gets Directory Security |
| iis_get_script_map | Gets script mapping on a virtual directory for a specific extension |
| iis_get_server_by_comment | Return the instance number associated with the Comment |
| iis_get_server_by_path | Return the instance number associated with the Path |
| iis_get_server_rights | Gets server rights |
| iis_get_service_state | Returns the state for the service defined by ServiceId |
| iis_remove_server | Removes the virtual web server indicated by ServerInstance |
| iis_set_app_settings | Creates application scope for a virtual directory |
| iis_set_dir_security | Sets Directory Security |
| iis_set_script_map | Sets script mapping on a virtual directory |
| iis_set_server_rights | Sets server rights |
| iis_start_server | Starts the virtual web server |
| iis_start_service | Starts the service defined by ServiceId |
| iis_stop_server | Stops the virtual web server |
| iis_stop_service | Stops the service defined by ServiceId |
| image2wbmp | 以 WBMP 格式将图像输出到浏览器或文件 |
| imageaffine | 返回经过仿射变换后的图像，剪切区域可选 |
| imageaffinematrixconcat | Concat two matrices (as in doing many ops in one go) |
| imageaffinematrixget | Return an image containing the affine tramsformed src image, using an optional clipping area |
| imagealphablending | 设定图像的混色模式 |
| imageantialias | 是否使用抗锯齿（antialias）功能 |
| imagearc | 画椭圆弧 |
| imagechar | 水平地画一个字符 |
| imagecharup | 垂直地画一个字符 |
| imagecolorallocate | 为一幅图像分配颜色 |
| imagecolorallocatealpha | 为一幅图像分配颜色 + alpha |
| imagecolorat | 取得某像素的颜色索引值 |
| imagecolorclosest | 取得与指定的颜色最接近的颜色的索引值 |
| imagecolorclosestalpha | 取得与指定的颜色加透明度最接近的颜色 |
| imagecolorclosesthwb | 取得与给定颜色最接近的色度的黑白色的索引 |
| imagecolordeallocate | 取消图像颜色的分配 |
| imagecolorexact | 取得指定颜色的索引值 |
| imagecolorexactalpha | 取得指定的颜色加透明度的索引值 |
| imagecolormatch | 使一个图像中调色板版本的颜色与真彩色版本更能匹配 |
| imagecolorresolve | 取得指定颜色的索引值或有可能得到的最接近的替代值 |
| imagecolorresolvealpha | 取得指定颜色 + alpha 的索引值或有可能得到的最接近的替代值 |
| imagecolorset | 给指定调色板索引设定颜色 |
| imagecolorsforindex | 取得某索引的颜色 |
| imagecolorstotal | 取得一幅图像的调色板中颜色的数目 |
| imagecolortransparent | 将某个颜色定义为透明色 |
| imageconvolution | 用系数 div 和 offset 申请一个 3x3 的卷积矩阵 |
| imagecopy | 拷贝图像的一部分 |
| imagecopymerge | 拷贝并合并图像的一部分 |
| imagecopymergegray | 用灰度拷贝并合并图像的一部分 |
| imagecopyresampled | 重采样拷贝部分图像并调整大小 |
| imagecopyresized | 拷贝部分图像并调整大小 |
| imagecreate | 新建一个基于调色板的图像 |
| imagecreatefromgd | 从 GD 文件或 URL 新建一图像 |
| imagecreatefromgd2 | 从 GD2 文件或 URL 新建一图像 |
| imagecreatefromgd2part | 从给定的 GD2 文件或 URL 中的部分新建一图像 |
| imagecreatefromgif | 由文件或 URL 创建一个新图象。 |
| imagecreatefromjpeg | 由文件或 URL 创建一个新图象。 |
| imagecreatefrompng | 由文件或 URL 创建一个新图象。 |
| imagecreatefromstring | 从字符串中的图像流新建一图像 |
| imagecreatefromwbmp | 由文件或 URL 创建一个新图象。 |
| imagecreatefromwebp | 由文件或 URL 创建一个新图象。 |
| imagecreatefromxbm | 由文件或 URL 创建一个新图象。 |
| imagecreatefromxpm | 由文件或 URL 创建一个新图象。 |
| imagecreatetruecolor | 新建一个真彩色图像 |
| imagecrop | Crop an image using the given coordinates and size, x, y, width and height |
| imagecropauto | Crop an image automatically using one of the available modes |
| imagedashedline | 画一虚线 |
| imagedestroy | 销毁一图像 |
| imageellipse | 画一个椭圆 |
| imagefill | 区域填充 |
| imagefilledarc | 画一椭圆弧且填充 |
| imagefilledellipse | 画一椭圆并填充 |
| imagefilledpolygon | 画一多边形并填充 |
| imagefilledrectangle | 画一矩形并填充 |
| imagefilltoborder | 区域填充到指定颜色的边界为止 |
| imagefilter | 对图像使用过滤器 |
| imageflip | Flips an image using a given mode |
| imagefontheight | 取得字体高度 |
| imagefontwidth | 取得字体宽度 |
| imageftbbox | 给出一个使用 FreeType 2 字体的文本框 |
| imagefttext | 使用 FreeType 2 字体将文本写入图像 |
| imagegammacorrect | 对 GD 图像应用 gamma 修正 |
| imagegd | 将 GD 图像输出到浏览器或文件 |
| imagegd2 | 将 GD2 图像输出到浏览器或文件 |
| imagegif | 输出图象到浏览器或文件。 |
| imagegrabscreen | Captures the whole screen |
| imagegrabwindow | Captures a window |
| imageinterlace | 激活或禁止隔行扫描 |
| imageistruecolor | 检查图像是否为真彩色图像 |
| imagejpeg | 输出图象到浏览器或文件。 |
| imagelayereffect | 设定 alpha 混色标志以使用绑定的 libgd 分层效果 |
| imageline | 画一条线段 |
| imageloadfont | 载入一新字体 |
| imagepalettecopy | 将调色板从一幅图像拷贝到另一幅 |
| imagepalettetotruecolor | Converts a palette based image to true color |
| imagepng | 以 PNG 格式将图像输出到浏览器或文件 |
| imagepolygon | 画一个多边形 |
| imagepsbbox | 给出一个使用 PostScript Type1 字体的文本方框 |
| imagepsencodefont | 改变字体中的字符编码矢量 |
| imagepsextendfont | 扩充或精简字体 |
| imagepsfreefont | 释放一个 PostScript Type 1 字体所占用的内存 |
| imagepsloadfont | 从文件中加载一个 PostScript Type 1 字体 |
| imagepsslantfont | 倾斜某字体 |
| imagepstext | 用 PostScript Type1 字体把文本字符串画在图像上 |
| imagerectangle | 画一个矩形 |
| imagerotate | 用给定角度旋转图像 |
| imagesavealpha | 设置标记以在保存 PNG 图像时保存完整的 alpha 通道信息（与单一透明色相反） |
| imagescale | Scale an image using the given new width and height |
| imagesetbrush | 设定画线用的画笔图像 |
| imagesetinterpolation | Set the interpolation method |
| imagesetpixel | 画一个单一像素 |
| imagesetstyle | 设定画线的风格 |
| imagesetthickness | 设定画线的宽度 |
| imagesettile | 设定用于填充的贴图 |
| imagestring | 水平地画一行字符串 |
| imagestringup | 垂直地画一行字符串 |
| imagesx | 取得图像宽度 |
| imagesy | 取得图像高度 |
| imagetruecolortopalette | 将真彩色图像转换为调色板图像 |
| imagettfbbox | 取得使用 TrueType 字体的文本的范围 |
| imagettftext | 用 TrueType 字体向图像写入文本 |
| imagetypes | 返回当前 PHP 版本所支持的图像类型 |
| imagewbmp | 以 WBMP 格式将图像输出到浏览器或文件 |
| imagewebp | 将 WebP 格式的图像输出到浏览器或文件 |
| imagexbm | 将 XBM 图像输出到浏览器或文件 |
| image_type_to_extension | 取得图像类型的文件后缀 |
| image_type_to_mime_type | 取得 getimagesize，exif_read_data，exif_thumbnail，exif_imagetype 所返回的图像类型的 MIME 类型 |
| imap_8bit | Convert an 8bit string to a quoted-printable string |
| imap_alerts | Returns all IMAP alert messages that have occurred |
| imap_append | Append a string message to a specified mailbox |
| imap_base64 | Decode BASE64 encoded text |
| imap_binary | Convert an 8bit string to a base64 string |
| imap_body | Read the message body |
| imap_bodystruct | Read the structure of a specified body section of a specific message |
| imap_check | Check current mailbox |
| imap_clearflag_full | Clears flags on messages |
| imap_close | Close an IMAP stream |
| imap_create | 别名 imap_createmailbox |
| imap_createmailbox | Create a new mailbox |
| imap_delete | Mark a message for deletion from current mailbox |
| imap_deletemailbox | Delete a mailbox |
| imap_errors | Returns all of the IMAP errors that have occurred |
| imap_expunge | Delete all messages marked for deletion |
| imap_fetchbody | Fetch a particular section of the body of the message |
| imap_fetchheader | Returns header for a message |
| imap_fetchmime | Fetch MIME headers for a particular section of the message |
| imap_fetchstructure | Read the structure of a particular message |
| imap_fetchtext | 别名 imap_body |
| imap_fetch_overview | Read an overview of the information in the headers of the given message |
| imap_gc | Clears IMAP cache |
| imap_getacl | Gets the ACL for a given mailbox |
| imap_getmailboxes | Read the list of mailboxes, returning detailed information on each one |
| imap_getsubscribed | List all the subscribed mailboxes |
| imap_get_quota | Retrieve the quota level settings, and usage statics per mailbox |
| imap_get_quotaroot | Retrieve the quota settings per user |
| imap_header | 别名 imap_headerinfo |
| imap_headerinfo | Read the header of the message |
| imap_headers | Returns headers for all messages in a mailbox |
| imap_last_error | Gets the last IMAP error that occurred during this page request |
| imap_list | Read the list of mailboxes |
| imap_listmailbox | 别名 imap_list |
| imap_listscan | Returns the list of mailboxes that matches the given text |
| imap_listsubscribed | 别名 imap_lsub |
| imap_lsub | List all the subscribed mailboxes |
| imap_mail | Send an email message |
| imap_mailboxmsginfo | Get information about the current mailbox |
| imap_mail_compose | Create a MIME message based on given envelope and body sections |
| imap_mail_copy | Copy specified messages to a mailbox |
| imap_mail_move | Move specified messages to a mailbox |
| imap_mime_header_decode | Decode MIME header elements |
| imap_msgno | Gets the message sequence number for the given UID |
| imap_num_msg | Gets the number of messages in the current mailbox |
| imap_num_recent | Gets the number of recent messages in current mailbox |
| imap_open | Open an IMAP stream to a mailbox |
| imap_ping | Check if the IMAP stream is still active |
| imap_qprint | Convert a quoted-printable string to an 8 bit string |
| imap_rename | 别名 imap_renamemailbox |
| imap_renamemailbox | Rename an old mailbox to new mailbox |
| imap_reopen | Reopen IMAP stream to new mailbox |
| imap_rfc822_parse_adrlist | Parses an address string |
| imap_rfc822_parse_headers | Parse mail headers from a string |
| imap_rfc822_write_address | Returns a properly formatted email address given the mailbox, host, and personal info |
| imap_savebody | Save a specific body section to a file |
| imap_scan | 别名 imap_listscan |
| imap_scanmailbox | 别名 imap_listscan |
| imap_search | This function returns an array of messages matching the given search criteria |
| imap_setacl | Sets the ACL for a given mailbox |
| imap_setflag_full | Sets flags on messages |
| imap_set_quota | Sets a quota for a given mailbox |
| imap_sort | Gets and sort messages |
| imap_status | Returns status information on a mailbox |
| imap_subscribe | Subscribe to a mailbox |
| imap_thread | Returns a tree of threaded message |
| imap_timeout | Set or fetch imap timeout |
| imap_uid | This function returns the UID for the given message sequence number |
| imap_undelete | Unmark the message which is marked deleted |
| imap_unsubscribe | Unsubscribe from a mailbox |
| imap_utf7_decode | Decodes a modified UTF-7 encoded string |
| imap_utf7_encode | Converts ISO-8859-1 string to modified UTF-7 text |
| imap_utf8 | Converts MIME-encoded text to UTF-8 |
| implode | 将一个一维数组的值转化为字符串 |
| import_request_variables | 将 GET／POST／Cookie 变量导入到全局作用域中 |
| inclued_get_data | Get the inclued data |
| inet_ntop | Converts a packed internet address to a human readable representation |
| inet_pton | Converts a human readable IP address to its packed in_addr representation |
| ingres_autocommit | Switch autocommit on or off |
| ingres_autocommit_state | Test if the connection is using autocommit |
| ingres_charset | Returns the installation character set |
| ingres_close | Close an Ingres database connection |
| ingres_commit | Commit a transaction |
| ingres_connect | Open a connection to an Ingres database |
| ingres_cursor | Get a cursor name for a given result resource |
| ingres_errno | Get the last Ingres error number generated |
| ingres_error | Get a meaningful error message for the last error generated |
| ingres_errsqlstate | Get the last SQLSTATE error code generated |
| ingres_escape_string | Escape special characters for use in a query |
| ingres_execute | Execute a prepared query |
| ingres_fetch_array | Fetch a row of result into an array |
| ingres_fetch_assoc | Fetch a row of result into an associative array |
| ingres_fetch_object | Fetch a row of result into an object |
| ingres_fetch_proc_return | Get the return value from a procedure call |
| ingres_fetch_row | Fetch a row of result into an enumerated array |
| ingres_field_length | Get the length of a field |
| ingres_field_name | Get the name of a field in a query result |
| ingres_field_nullable | Test if a field is nullable |
| ingres_field_precision | Get the precision of a field |
| ingres_field_scale | Get the scale of a field |
| ingres_field_type | Get the type of a field in a query result |
| ingres_free_result | Free the resources associated with a result identifier |
| ingres_next_error | Get the next Ingres error |
| ingres_num_fields | Get the number of fields returned by the last query |
| ingres_num_rows | Get the number of rows affected or returned by a query |
| ingres_pconnect | Open a persistent connection to an Ingres database |
| ingres_prepare | Prepare a query for later execution |
| ingres_query | Send an SQL query to Ingres |
| ingres_result_seek | Set the row position before fetching data |
| ingres_rollback | Roll back a transaction |
| ingres_set_environment | Set environment features controlling output options |
| ingres_unbuffered_query | Send an unbuffered SQL query to Ingres |
| ini_alter | 别名 ini_set |
| ini_get | 获取一个配置选项的值 |
| ini_get_all | 获取所有配置选项 |
| ini_restore | 恢复配置选项的值 |
| ini_set | 为一个配置选项设置值 |
| inotify_add_watch | Add a watch to an initialized inotify instance |
| inotify_init | Initialize an inotify instance |
| inotify_queue_len | Return a number upper than zero if there are pending events |
| inotify_read | Read events from an inotify instance |
| inotify_rm_watch | Remove an existing watch from an inotify instance |
| intdiv | Integer division |
| interface_exists | 检查接口是否已被定义 |
| intl_error_name | Get symbolic name for a given error code |
| intl_get_error_code | Get the last error code |
| intl_get_error_message | Get description of the last error |
| intl_is_failure | Check whether the given error code indicates failure |
| intval | 获取变量的整数值 |
| in_array | 检查数组中是否存在某个值 |
| ip2long | 将一个IPV4的字符串互联网协议转换成数字格式 |
| iptcembed | 将二进制 IPTC 数据嵌入到一幅 JPEG 图像中 |
| iptcparse | 将二进制 IPTC 块解析为单个标记 |
| isset | 检测变量是否设置 |
| is_a | 如果对象属于该类或该类是此对象的父类则返回 TRUE |
| is_array | 检测变量是否是数组 |
| is_bool | 检测变量是否是布尔型 |
| is_callable | 检测参数是否为合法的可调用结构 |
| is_dir | 判断给定文件名是否是一个目录 |
| is_double | is_float 的别名 |
| is_executable | 判断给定文件名是否可执行 |
| is_file | 判断给定文件名是否为一个正常的文件 |
| is_finite | 判断是否为有限值 |
| is_float | 检测变量是否是浮点型 |
| is_infinite | 判断是否为无限值 |
| is_int | 检测变量是否是整数 |
| is_integer | is_int 的别名 |
| is_link | 判断给定文件名是否为一个符号连接 |
| is_long | is_int 的别名 |
| is_nan | 判断是否为合法数值 |
| is_null | 检测变量是否为 NULL |
| is_numeric | 检测变量是否为数字或数字字符串 |
| is_object | 检测变量是否是一个对象 |
| is_readable | 判断给定文件名是否可读 |
| is_real | is_float 的别名 |
| is_resource | 检测变量是否为资源类型 |
| is_scalar | 检测变量是否是一个标量 |
| is_soap_fault | Checks if a SOAP call has failed |
| is_string | 检测变量是否是字符串 |
| is_subclass_of | 如果此对象是该类的子类，则返回 TRUE |
| is_tainted | Checks whether a string is tainted |
| is_uploaded_file | 判断文件是否是通过 HTTP POST 上传的 |
| is_writable | 判断给定的文件名是否可写 |
| is_writeable | is_writable 的别名 |
| iterator_apply | 为迭代器中每个元素调用一个用户自定义函数 |
| iterator_count | 计算迭代器中元素的个数 |
| iterator_to_array | 将迭代器中的元素拷贝到数组 |
j
| 函数 | 说明 |
|---|---|
| JDDayOfWeek | 返回星期的日期 |
| JDMonthName | 返回月份的名称 |
| JDToFrench | 转变一个Julian Day计数到French Republican历法的日期 |
| JDToGregorian | 转变一个Julian Day计数为Gregorian历法日期 |
| jdtojewish | 转换一个julian天数为Jewish历法的日期 |
| JDToJulian | 转变一个Julian Day计数到Julian历法的日期 |
| jdtounix | 转变Julian Day计数为一个Unix时间戳 |
| JewishToJD | 转变一个Jewish历法的日期为一个Julian Day计数 |
| join | 别名 implode |
| jpeg2wbmp | 将 JPEG 图像文件转换为 WBMP 图像文件 |
| json_decode | 对 JSON 格式的字符串进行编码 |
| json_encode | 对变量进行 JSON 编码 |
| json_last_error | 返回最后发生的错误 |
| json_last_error_msg | Returns the error string of the last json_encode() or json_decode() call |
| judy_type | Return the type of a Judy array |
| judy_version | Return or print the current PHP Judy version |
| JulianToJD | 转变一个Julian历法的日期为Julian Day计数 |
k
| 函数 | 说明 |
|---|---|
| kadm5_chpass_principal | Changes the principal’s password |
| kadm5_create_principal | Creates a kerberos principal with the given parameters |
| kadm5_delete_principal | Deletes a kerberos principal |
| kadm5_destroy | Closes the connection to the admin server and releases all related resources |
| kadm5_flush | Flush all changes to the Kerberos database |
| kadm5_get_policies | Gets all policies from the Kerberos database |
| kadm5_get_principal | Gets the principal’s entries from the Kerberos database |
| kadm5_get_principals | Gets all principals from the Kerberos database |
| kadm5_init_with_password | Opens a connection to the KADM5 library |
| kadm5_modify_principal | Modifies a kerberos principal with the given parameters |
| key | 从关联数组中取得键名 |
| key_exists | 别名 array_key_exists |
| krsort | 对数组按照键名逆向排序 |
| ksort | 对数组按照键名排序 |
l
| 函数 | 说明 |
|---|---|
| lcfirst | 使一个字符串的第一个字符小写 |
| lcg_value | 组合线性同余发生器 |
| lchgrp | Changes group ownership of symlink |
| lchown | Changes user ownership of symlink |
| ldap_8859_to_t61 | Translate 8859 characters to t61 characters |
| ldap_add | Add entries to LDAP directory |
| ldap_bind | 绑定 LDAP 目录 |
| ldap_close | 别名 ldap_unbind |
| ldap_compare | Compare value of attribute found in entry specified with DN |
| ldap_connect | Connect to an LDAP server |
| ldap_control_paged_result | Send LDAP pagination control |
| ldap_control_paged_result_response | Retrieve the LDAP pagination cookie |
| ldap_count_entries | Count the number of entries in a search |
| ldap_delete | Delete an entry from a directory |
| ldap_dn2ufn | Convert DN to User Friendly Naming format |
| ldap_err2str | Convert LDAP error number into string error message |
| ldap_errno | Return the LDAP error number of the last LDAP command |
| ldap_error | Return the LDAP error message of the last LDAP command |
| ldap_escape | Escape a string for use in an LDAP filter or DN |
| ldap_explode_dn | Splits DN into its component parts |
| ldap_first_attribute | Return first attribute |
| ldap_first_entry | Return first result id |
| ldap_first_reference | Return first reference |
| ldap_free_result | Free result memory |
| ldap_get_attributes | Get attributes from a search result entry |
| ldap_get_dn | Get the DN of a result entry |
| ldap_get_entries | Get all result entries |
| ldap_get_option | Get the current value for given option |
| ldap_get_values | Get all values from a result entry |
| ldap_get_values_len | Get all binary values from a result entry |
| ldap_list | Single-level search |
| ldap_modify | Modify an LDAP entry |
| ldap_modify_batch | Batch and execute modifications on an LDAP entry |
| ldap_mod_add | Add attribute values to current attributes |
| ldap_mod_del | Delete attribute values from current attributes |
| ldap_mod_replace | Replace attribute values with new ones |
| ldap_next_attribute | Get the next attribute in result |
| ldap_next_entry | Get next result entry |
| ldap_next_reference | Get next reference |
| ldap_parse_reference | Extract information from reference entry |
| ldap_parse_result | Extract information from result |
| ldap_read | Read an entry |
| ldap_rename | Modify the name of an entry |
| ldap_sasl_bind | Bind to LDAP directory using SASL |
| ldap_search | Search LDAP tree |
| ldap_set_option | Set the value of the given option |
| ldap_set_rebind_proc | Set a callback function to do re-binds on referral chasing |
| ldap_sort | Sort LDAP result entries |
| ldap_start_tls | Start TLS |
| ldap_t61_to_8859 | Translate t61 characters to 8859 characters |
| ldap_unbind | Unbind from LDAP directory |
| levenshtein | 计算两个字符串之间的编辑距离 |
| libxml_clear_errors | Clear libxml error buffer |
| libxml_disable_entity_loader | Disable the ability to load external entities |
| libxml_get_errors | Retrieve array of errors |
| libxml_get_last_error | Retrieve last error from libxml |
| libxml_set_external_entity_loader | Changes the default external entity loader |
| libxml_set_streams_context | Set the streams context for the next libxml document load or write |
| libxml_use_internal_errors | Disable libxml errors and allow user to fetch error information as needed |
| link | 建立一个硬连接 |
| linkinfo | 获取一个连接的信息 |
| list | 把数组中的值赋给一些变量 |
| localeconv | Get numeric formatting information |
| localtime | 取得本地时间 |
| log | 自然对数 |
| log1p | 返回 log(1 + number)，甚至当 number 的值接近零也能计算出准确结果 |
| log10 | 以 10 为底的对数 |
| long2ip | Converts an long integer address into a string in (IPv4) Internet standard dotted format |
| lstat | 给出一个文件或符号连接的信息 |
| ltrim | 删除字符串开头的空白字符（或其他字符） |
| lzf_compress | LZF compression |
| lzf_decompress | LZF decompression |
| lzf_optimized_for | Determines what LZF extension was optimized for |
m
| 函数 | 说明 |
|---|---|
| magic_quotes_runtime | 别名 set_magic_quotes_runtime |
| 发送邮件 | |
| mailparse_determine_best_xfer_encoding | Gets the best way of encoding |
| mailparse_msg_create | Create a mime mail resource |
| mailparse_msg_extract_part | Extracts/decodes a message section |
| mailparse_msg_extract_part_file | Extracts/decodes a message section |
| mailparse_msg_extract_whole_part_file | Extracts a message section including headers without decoding the transfer encoding |
| mailparse_msg_free | Frees a MIME resource |
| mailparse_msg_get_part | Returns a handle on a given section in a mimemessage |
| mailparse_msg_get_part_data | Returns an associative array of info about the message |
| mailparse_msg_get_structure | Returns an array of mime section names in the supplied message |
| mailparse_msg_parse | Incrementally parse data into buffer |
| mailparse_msg_parse_file | Parses a file |
| mailparse_rfc822_parse_addresses | Parse RFC 822 compliant addresses |
| mailparse_stream_encode | Streams data from source file pointer, apply encoding and write to destfp |
| mailparse_uudecode_all | Scans the data from fp and extract each embedded uuencoded file |
| main | 虚拟的main |
| max | 找出最大值 |
| maxdb_affected_rows | Gets the number of affected rows in a previous MaxDB operation |
| maxdb_autocommit | Turns on or off auto-commiting database modifications |
| maxdb_bind_param | 别名 maxdb_stmt_bind_param |
| maxdb_bind_result | 别名 maxdb_stmt_bind_result |
| maxdb_change_user | Changes the user of the specified database connection |
| maxdb_character_set_name | Returns the default character set for the database connection |
| maxdb_client_encoding | 别名 maxdb_character_set_name |
| maxdb_close | Closes a previously opened database connection |
| maxdb_close_long_data | 别名 maxdb_stmt_close_long_data |
| maxdb_commit | Commits the current transaction |
| maxdb_connect | Open a new connection to the MaxDB server |
| maxdb_connect_errno | Returns the error code from last connect call |
| maxdb_connect_error | Returns a string description of the last connect error |
| maxdb_data_seek | Adjusts the result pointer to an arbitary row in the result |
| maxdb_debug | Performs debugging operations |
| maxdb_disable_reads_from_master | Disable reads from master |
| maxdb_disable_rpl_parse | Disable RPL parse |
| maxdb_dump_debug_info | Dump debugging information into the log |
| maxdb_embedded_connect | Open a connection to an embedded MaxDB server |
| maxdb_enable_reads_from_master | Enable reads from master |
| maxdb_enable_rpl_parse | Enable RPL parse |
| maxdb_errno | Returns the error code for the most recent function call |
| maxdb_error | Returns a string description of the last error |
| maxdb_escape_string | 别名 maxdb_real_escape_string |
| maxdb_execute | 别名 maxdb_stmt_execute |
| maxdb_fetch | 别名 maxdb_stmt_fetch |
| maxdb_fetch_array | Fetch a result row as an associative, a numeric array, or both |
| maxdb_fetch_assoc | Fetch a result row as an associative array |
| maxdb_fetch_field | Returns the next field in the result set |
| maxdb_fetch_fields | Returns an array of resources representing the fields in a result set |
| maxdb_fetch_field_direct | Fetch meta-data for a single field |
| maxdb_fetch_lengths | Returns the lengths of the columns of the current row in the result set |
| maxdb_fetch_object | Returns the current row of a result set as an object |
| maxdb_fetch_row | Get a result row as an enumerated array |
| maxdb_field_count | Returns the number of columns for the most recent query |
| maxdb_field_seek | Set result pointer to a specified field offset |
| maxdb_field_tell | Get current field offset of a result pointer |
| maxdb_free_result | Frees the memory associated with a result |
| maxdb_get_client_info | Returns the MaxDB client version as a string |
| maxdb_get_client_version | Get MaxDB client info |
| maxdb_get_host_info | Returns a string representing the type of connection used |
| maxdb_get_metadata | 别名 maxdb_stmt_result_metadata |
| maxdb_get_proto_info | Returns the version of the MaxDB protocol used |
| maxdb_get_server_info | Returns the version of the MaxDB server |
| maxdb_get_server_version | Returns the version of the MaxDB server as an integer |
| maxdb_info | Retrieves information about the most recently executed query |
| maxdb_init | Initializes MaxDB and returns an resource for use with maxdb_real_connect |
| maxdb_insert_id | Returns the auto generated id used in the last query |
| maxdb_kill | Disconnects from a MaxDB server |
| maxdb_master_query | Enforce execution of a query on the master in a master/slave setup |
| maxdb_more_results | Check if there any more query results from a multi query |
| maxdb_multi_query | Performs a query on the database |
| maxdb_next_result | Prepare next result from multi_query |
| maxdb_num_fields | Get the number of fields in a result |
| maxdb_num_rows | Gets the number of rows in a result |
| maxdb_options | Set options |
| maxdb_param_count | 别名 maxdb_stmt_param_count |
| maxdb_ping | Pings a server connection, or tries to reconnect if the connection has gone down |
| maxdb_prepare | Prepare an SQL statement for execution |
| maxdb_query | Performs a query on the database |
| maxdb_real_connect | Opens a connection to a MaxDB server |
| maxdb_real_escape_string | Escapes special characters in a string for use in an SQL statement, taking into account the current charset of the connection |
| maxdb_real_query | Execute an SQL query |
| maxdb_report | Enables or disables internal report functions |
| maxdb_rollback | Rolls back current transaction |
| maxdb_rpl_parse_enabled | Check if RPL parse is enabled |
| maxdb_rpl_probe | RPL probe |
| maxdb_rpl_query_type | Returns RPL query type |
| maxdb_select_db | Selects the default database for database queries |
| maxdb_send_long_data | 别名 maxdb_stmt_send_long_data |
| maxdb_send_query | Send the query and return |
| maxdb_server_end | Shut down the embedded server |
| maxdb_server_init | Initialize embedded server |
| maxdb_set_opt | 别名 maxdb_options |
| maxdb_sqlstate | Returns the SQLSTATE error from previous MaxDB operation |
| maxdb_ssl_set | Used for establishing secure connections using SSL |
| maxdb_stat | Gets the current system status |
| maxdb_stmt_affected_rows | Returns the total number of rows changed, deleted, or inserted by the last executed statement |
| maxdb_stmt_bind_param | Binds variables to a prepared statement as parameters |
| maxdb_stmt_bind_result | Binds variables to a prepared statement for result storage |
| maxdb_stmt_close | Closes a prepared statement |
| maxdb_stmt_close_long_data | Ends a sequence of maxdb_stmt_send_long_data |
| maxdb_stmt_data_seek | Seeks to an arbitray row in statement result set |
| maxdb_stmt_errno | Returns the error code for the most recent statement call |
| maxdb_stmt_error | Returns a string description for last statement error |
| maxdb_stmt_execute | Executes a prepared Query |
| maxdb_stmt_fetch | Fetch results from a prepared statement into the bound variables |
| maxdb_stmt_free_result | Frees stored result memory for the given statement handle |
| maxdb_stmt_init | Initializes a statement and returns an resource for use with maxdb_stmt_prepare |
| maxdb_stmt_num_rows | Return the number of rows in statements result set |
| maxdb_stmt_param_count | Returns the number of parameter for the given statement |
| maxdb_stmt_prepare | Prepare an SQL statement for execution |
| maxdb_stmt_reset | Resets a prepared statement |
| maxdb_stmt_result_metadata | Returns result set metadata from a prepared statement |
| maxdb_stmt_send_long_data | Send data in blocks |
| maxdb_stmt_sqlstate | Returns SQLSTATE error from previous statement operation |
| maxdb_stmt_store_result | Transfers a result set from a prepared statement |
| maxdb_store_result | Transfers a result set from the last query |
| maxdb_thread_id | Returns the thread ID for the current connection |
| maxdb_thread_safe | Returns whether thread safety is given or not |
| maxdb_use_result | Initiate a result set retrieval |
| maxdb_warning_count | Returns the number of warnings from the last query for the given link |
| mb_check_encoding | 检查字符串在指定的编码里是否有效 |
| mb_convert_case | 对字符串进行大小写转换 |
| mb_convert_encoding | 转换字符的编码 |
| mb_convert_kana | Convert “kana” one from another (“zen-kaku”, “han-kaku” and more) |
| mb_convert_variables | 转换一个或多个变量的字符编码 |
| mb_decode_mimeheader | 解码 MIME 头字段中的字符串 |
| mb_decode_numericentity | 根据 HTML 数字字符串解码成字符 |
| mb_detect_encoding | 检测字符的编码 |
| mb_detect_order | 设置/获取 字符编码的检测顺序 |
| mb_encode_mimeheader | 为 MIME 头编码字符串 |
| mb_encode_numericentity | Encode character to HTML numeric string reference |
| mb_encoding_aliases | Get aliases of a known encoding type |
| mb_ereg | Regular expression match with multibyte support |
| mb_eregi | Regular expression match ignoring case with multibyte support |
| mb_eregi_replace | Replace regular expression with multibyte support ignoring case |
| mb_ereg_match | Regular expression match for multibyte string |
| mb_ereg_replace | Replace regular expression with multibyte support |
| mb_ereg_replace_callback | Perform a regular expresssion seach and replace with multibyte support using a callback |
| mb_ereg_search | Multibyte regular expression match for predefined multibyte string |
| mb_ereg_search_getpos | Returns start point for next regular expression match |
| mb_ereg_search_getregs | Retrieve the result from the last multibyte regular expression match |
| mb_ereg_search_init | Setup string and regular expression for a multibyte regular expression match |
| mb_ereg_search_pos | Returns position and length of a matched part of the multibyte regular expression for a predefined multibyte string |
| mb_ereg_search_regs | Returns the matched part of a multibyte regular expression |
| mb_ereg_search_setpos | Set start point of next regular expression match |
| mb_get_info | 获取 mbstring 的内部设置 |
| mb_http_input | 检测 HTTP 输入字符编码 |
| mb_http_output | 设置/获取 HTTP 输出字符编码 |
| mb_internal_encoding | 设置/获取内部字符编码 |
| mb_language | 设置/获取当前的语言 |
| mb_list_encodings | 返回所有支持编码的数组 |
| mb_output_handler | 在输出缓冲中转换字符编码的回调函数 |
| mb_parse_str | 解析 GET/POST/COOKIE 数据并设置全局变量 |
| mb_preferred_mime_name | 获取 MIME 字符串 |
| mb_regex_encoding | Set/Get character encoding for multibyte regex |
| mb_regex_set_options | Set/Get the default options for mbregex functions |
| mb_send_mail | 发送编码过的邮件 |
| mb_split | 使用正则表达式分割多字节字符串 |
| mb_strcut | 获取字符的一部分 |
| mb_strimwidth | 获取按指定宽度截断的字符串 |
| mb_stripos | 大小写不敏感地查找字符串在另一个字符串中首次出现的位置 |
| mb_stristr | 大小写不敏感地查找字符串在另一个字符串里的首次出现 |
| mb_strlen | 获取字符串的长度 |
| mb_strpos | 查找字符串在另一个字符串中首次出现的位置 |
| mb_strrchr | 查找指定字符在另一个字符串中最后一次的出现 |
| mb_strrichr | 大小写不敏感地查找指定字符在另一个字符串中最后一次的出现 |
| mb_strripos | 大小写不敏感地在字符串中查找一个字符串最后出现的位置 |
| mb_strrpos | 查找字符串在一个字符串中最后出现的位置 |
| mb_strstr | 查找字符串在另一个字符串里的首次出现 |
| mb_strtolower | 使字符串小写 |
| mb_strtoupper | 使字符串大写 |
| mb_strwidth | 返回字符串的宽度 |
| mb_substitute_character | 设置/获取替代字符 |
| mb_substr | 获取字符串的部分 |
| mb_substr_count | 统计字符串出现的次数 |
| mcrypt_cbc | 以 CBC 模式加解密数据 |
| mcrypt_cfb | 以 CFB 模式加解密数据 |
| mcrypt_create_iv | 从随机源创建初始向量 |
| mcrypt_decrypt | 使用给定参数解密密文 |
| mcrypt_ecb | 已废弃：使用 ECB 模式加解密数据 |
| mcrypt_encrypt | 使用给定参数加密明文 |
| mcrypt_enc_get_algorithms_name | 返回打开的算法名称 |
| mcrypt_enc_get_block_size | 返回打开的算法的分组大小 |
| mcrypt_enc_get_iv_size | 返回打开的算法的初始向量大小 |
| mcrypt_enc_get_key_size | 返回打开的模式所能支持的最长密钥 |
| mcrypt_enc_get_modes_name | 返回打开的模式的名称 |
| mcrypt_enc_get_supported_key_sizes | 以数组方式返回打开的算法所支持的密钥长度 |
| mcrypt_enc_is_block_algorithm | 检测打开模式的算法是否为分组算法 |
| mcrypt_enc_is_block_algorithm_mode | 检测打开的模式是否支持分组加密 |
| mcrypt_enc_is_block_mode | 检测打开的模式是否以分组方式输出 |
| mcrypt_enc_self_test | 在打开的模块上进行自检 |
| mcrypt_generic | 加密数据 |
| mcrypt_generic_deinit | 对加密模块进行清理工作 |
| mcrypt_generic_end | 终止加密 |
| mcrypt_generic_init | 初始化加密所需的缓冲区 |
| mcrypt_get_block_size | 获得加密算法的分组大小 |
| mcrypt_get_cipher_name | 获取加密算法名称 |
| mcrypt_get_iv_size | 返回指定算法/模式组合的初始向量大小 |
| mcrypt_get_key_size | 获取指定加密算法的密钥大小 |
| mcrypt_list_algorithms | 获取支持的加密算法 |
| mcrypt_list_modes | 获取所支持的模式 |
| mcrypt_module_close | 关闭加密模块 |
| mcrypt_module_get_algo_block_size | 返回指定算法的分组大小 |
| mcrypt_module_get_algo_key_size | 获取打开模式所支持的最大密钥大小 |
| mcrypt_module_get_supported_key_sizes | 以数组形式返回打开的算法所支持的密钥大小 |
| mcrypt_module_is_block_algorithm | 检测指定算法是否为分组加密算法 |
| mcrypt_module_is_block_algorithm_mode | 返回指定模块是否是分组加密模式 |
| mcrypt_module_is_block_mode | 检测指定模式是否以分组方式输出 |
| mcrypt_module_open | 打开算法和模式对应的模块 |
| mcrypt_module_self_test | 在指定模块上执行自检 |
| mcrypt_ofb | 使用 OFB 模式加密/解密数据 |
| md5 | 计算字符串的 MD5 散列值 |
| md5_file | 计算指定文件的 MD5 散列值 |
| mdecrypt_generic | 解密数据 |
| memcache_debug | 转换调试输出的开/关 |
| memory_get_peak_usage | 返回分配给 PHP 内存的峰值 |
| memory_get_usage | 返回分配给 PHP 的内存量 |
| metaphone | Calculate the metaphone key of a string |
| method_exists | 检查类的方法是否存在 |
| mhash | Computes hash |
| mhash_count | Gets the highest available hash ID |
| mhash_get_block_size | Gets the block size of the specified hash |
| mhash_get_hash_name | Gets the name of the specified hash |
| mhash_keygen_s2k | Generates a key |
| microtime | 返回当前 Unix 时间戳和微秒数 |
| mime_content_type | 检测文件的 MIME 类型（已废弃） |
| min | 找出最小值 |
| ming_keypress | Returns the action flag for keyPress(char) |
| ming_setcubicthreshold | Set cubic threshold |
| ming_setscale | Set the global scaling factor. |
| ming_setswfcompression | Sets the SWF output compression |
| ming_useconstants | Use constant pool |
| ming_useswfversion | Sets the SWF version |
| mkdir | 新建目录 |
| mktime | 取得一个日期的 Unix 时间戳 |
| money_format | Formats a number as a currency string |
| MongoDB context options | MongoDB context option listing |
| MongoDB\BSON\fromJSON | Returns the BSON representation of a JSON value |
| MongoDB\BSON\fromPHP | Returns the BSON representation of a PHP value |
| MongoDB\BSON\toJSON | Returns the JSON representation of a BSON value |
| MongoDB\BSON\toPHP | Returns the PHP representation of a BSON value |
| move_uploaded_file | 将上传的文件移动到新位置 |
| mqseries_back | MQSeries MQBACK |
| mqseries_begin | MQseries MQBEGIN |
| mqseries_close | MQSeries MQCLOSE |
| mqseries_cmit | MQSeries MQCMIT |
| mqseries_conn | MQSeries MQCONN |
| mqseries_connx | MQSeries MQCONNX |
| mqseries_disc | MQSeries MQDISC |
| mqseries_get | MQSeries MQGET |
| mqseries_inq | MQSeries MQINQ |
| mqseries_open | MQSeries MQOPEN |
| mqseries_put | MQSeries MQPUT |
| mqseries_put1 | MQSeries MQPUT1 |
| mqseries_set | MQSeries MQSET |
| mqseries_strerror | Returns the error message corresponding to a result code (MQRC). |
| msession_connect | Connect to msession server |
| msession_count | Get session count |
| msession_create | Create a session |
| msession_destroy | Destroy a session |
| msession_disconnect | Close connection to msession server |
| msession_find | Find all sessions with name and value |
| msession_get | Get value from session |
| msession_get_array | Get array of msession variables |
| msession_get_data | Get data session unstructured data |
| msession_inc | Increment value in session |
| msession_list | List all sessions |
| msession_listvar | List sessions with variable |
| msession_lock | Lock a session |
| msession_plugin | Call an escape function within the msession personality plugin |
| msession_randstr | Get random string |
| msession_set | Set value in session |
| msession_set_array | Set msession variables from an array |
| msession_set_data | Set data session unstructured data |
| msession_timeout | Set/get session timeout |
| msession_uniq | Get unique id |
| msession_unlock | Unlock a session |
| msg_get_queue | Create or attach to a message queue |
| msg_queue_exists | Check whether a message queue exists |
| msg_receive | Receive a message from a message queue |
| msg_remove_queue | Destroy a message queue |
| msg_send | Send a message to a message queue |
| msg_set_queue | Set information in the message queue data structure |
| msg_stat_queue | Returns information from the message queue data structure |
| msql | Alias of msql_db_query |
| msql_affected_rows | Returns number of affected rows |
| msql_close | Close mSQL connection |
| msql_connect | Open mSQL connection |
| msql_createdb | 别名 msql_create_db |
| msql_create_db | Create mSQL database |
| msql_data_seek | Move internal row pointer |
| msql_dbname | 别名 msql_result |
| msql_db_query | Send mSQL query |
| msql_drop_db | Drop (delete) mSQL database |
| msql_error | Returns error message of last msql call |
| msql_fetch_array | Fetch row as array |
| msql_fetch_field | Get field information |
| msql_fetch_object | Fetch row as object |
| msql_fetch_row | Get row as enumerated array |
| msql_fieldflags | Alias of msql_field_flags |
| msql_fieldlen | Alias of msql_field_len |
| msql_fieldname | Alias of msql_field_name |
| msql_fieldtable | Alias of msql_field_table |
| msql_fieldtype | Alias of msql_field_type |
| msql_field_flags | Get field flags |
| msql_field_len | Get field length |
| msql_field_name | Get the name of the specified field in a result |
| msql_field_seek | Set field offset |
| msql_field_table | Get table name for field |
| msql_field_type | Get field type |
| msql_free_result | Free result memory |
| msql_list_dbs | List mSQL databases on server |
| msql_list_fields | List result fields |
| msql_list_tables | List tables in an mSQL database |
| msql_numfields | Alias of msql_num_fields |
| msql_numrows | Alias of msql_num_rows |
| msql_num_fields | Get number of fields in result |
| msql_num_rows | Get number of rows in result |
| msql_pconnect | Open persistent mSQL connection |
| msql_query | Send mSQL query |
| msql_regcase | Alias of sql_regcase |
| msql_result | Get result data |
| msql_select_db | Select mSQL database |
| msql_tablename | Alias of msql_result |
| mssql_bind | Adds a parameter to a stored procedure or a remote stored procedure |
| mssql_close | 关闭MS SQL Server链接 |
| mssql_connect | 打开MS SQL server链接 |
| mssql_data_seek | Moves internal row pointer |
| mssql_execute | Executes a stored procedure on a MS SQL server database |
| mssql_fetch_array | Fetch a result row as an associative array, a numeric array, or both |
| mssql_fetch_assoc | Returns an associative array of the current row in the result |
| mssql_fetch_batch | Returns the next batch of records |
| mssql_fetch_field | Get field information |
| mssql_fetch_object | Fetch row as object |
| mssql_fetch_row | Get row as enumerated array |
| mssql_field_length | Get the length of a field |
| mssql_field_name | Get the name of a field |
| mssql_field_seek | Seeks to the specified field offset |
| mssql_field_type | Gets the type of a field |
| mssql_free_result | Free result memory |
| mssql_free_statement | Free statement memory |
| mssql_get_last_message | Returns the last message from the server |
| mssql_guid_string | Converts a 16 byte binary GUID to a string |
| mssql_init | Initializes a stored procedure or a remote stored procedure |
| mssql_min_error_severity | Sets the minimum error severity |
| mssql_min_message_severity | Sets the minimum message severity |
| mssql_next_result | Move the internal result pointer to the next result |
| mssql_num_fields | Gets the number of fields in result |
| mssql_num_rows | Gets the number of rows in result |
| mssql_pconnect | Open persistent MS SQL connection |
| mssql_query | Send MS SQL query |
| mssql_result | Get result data |
| mssql_rows_affected | Returns the number of records affected by the query |
| mssql_select_db | Select MS SQL database |
| mt_getrandmax | 显示随机数的最大可能值 |
| mt_rand | 生成更好的随机数 |
| mt_srand | 播下一个更好的随机数发生器种子 |
| mysqli_bind_param | mysqli_stmt_bind_param的别名 |
| mysqli_bind_result | mysqli_stmt_bind_result的别名 |
| mysqli_client_encoding | mysqli_character_set_name的别名 |
| mysqli_disable_rpl_parse | 禁用RPL解析 |
| mysqli_enable_reads_from_master | 开启从主机读取 |
| mysqli_enable_rpl_parse | 开启RPL解析 |
| mysqli_escape_string | 别名 mysqli_real_escape_string |
| mysqli_execute | mysqli_stmt_execute的别名 |
| mysqli_fetch | mysqli_stmt_fetch的别名。 |
| mysqli_get_cache_stats | 返回客户端Zval缓存统计信息 |
| mysqli_get_client_stats | Returns client per-process statistics |
| mysqli_get_client_version | Returns the MySQL client version as an integer |
| mysqli_get_links_stats | Return information about open and cached links |
| mysqli_get_metadata | mysqli_stmt_result_metadata的别名 |
| mysqli_master_query | 在主/从机制中强制在主机中执行一个查询 |
| mysqli_param_count | mysqli_stmt_param_count的别名 |
| mysqli_report | 开启或禁用（Mysql）内部（错误）报告函数 |
| mysqli_rpl_parse_enabled | 检查是否开启了RPL解析 |
| mysqli_rpl_probe | RPL探测 |
| mysqli_send_long_data | mysqli_stmt_send_long_data的别名 |
| mysqli_set_opt | mysqli_options的别名 |
| mysqli_slave_query | 在主/从机制中强制在从机上执行一个查询 |
| mysqlnd_memcache_get_config | Returns information about the plugin configuration |
| mysqlnd_memcache_set | Associate a MySQL connection with a Memcache connection |
| mysqlnd_ms_dump_servers | Returns a list of currently configured servers |
| mysqlnd_ms_fabric_select_global | Switch to global sharding server for a given table |
| mysqlnd_ms_fabric_select_shard | Switch to shard |
| mysqlnd_ms_get_last_gtid | 返回最后的全局同步 ID (GTID) |
| mysqlnd_ms_get_last_used_connection | Returns an array which describes the last used connection |
| mysqlnd_ms_get_stats | Returns query distribution and connection statistics |
| mysqlnd_ms_match_wild | Finds whether a table name matches a wildcard pattern or not |
| mysqlnd_ms_query_is_select | 查询给定的 SQL 会发送给 master、slave 还是最后使用的 MySQL server 执行。 |
| mysqlnd_ms_set_qos | Sets the quality of service needed from the cluster |
| mysqlnd_ms_set_user_pick_server | Sets a callback for user-defined read/write splitting |
| mysqlnd_ms_xa_begin | Starts a distributed/XA transaction among MySQL servers |
| mysqlnd_ms_xa_commit | Commits a distributed/XA transaction among MySQL servers |
| mysqlnd_ms_xa_gc | Garbage collects unfinished XA transactions after severe errors |
| mysqlnd_ms_xa_rollback | Rolls back a distributed/XA transaction among MySQL servers |
| mysqlnd_qc_clear_cache | Flush all cache contents |
| mysqlnd_qc_get_available_handlers | Returns a list of available storage handler |
| mysqlnd_qc_get_cache_info | Returns information on the current handler, the number of cache entries and cache entries, if available |
| mysqlnd_qc_get_core_stats | Statistics collected by the core of the query cache |
| mysqlnd_qc_get_normalized_query_trace_log | Returns a normalized query trace log for each query inspected by the query cache |
| mysqlnd_qc_get_query_trace_log | Returns a backtrace for each query inspected by the query cache |
| mysqlnd_qc_set_cache_condition | Set conditions for automatic caching |
| mysqlnd_qc_set_is_select | Installs a callback which decides whether a statement is cached |
| mysqlnd_qc_set_storage_handler | Change current storage handler |
| mysqlnd_qc_set_user_handlers | Sets the callback functions for a user-defined procedural storage handler |
| mysqlnd_uh_convert_to_mysqlnd | Converts a MySQL connection handle into a mysqlnd connection handle |
| mysqlnd_uh_set_connection_proxy | Installs a proxy for mysqlnd connections |
| mysqlnd_uh_set_statement_proxy | Installs a proxy for mysqlnd statements |
| mysql_affected_rows | 取得前一次 MySQL 操作所影响的记录行数 |
| mysql_client_encoding | 返回字符集的名称 |
| mysql_close | 关闭 MySQL 连接 |
| mysql_connect | 打开一个到 MySQL 服务器的连接 |
| mysql_create_db | 新建一个 MySQL 数据库 |
| mysql_data_seek | 移动内部结果的指针 |
| mysql_db_name | 取得结果数据 |
| mysql_db_query | 发送一条 MySQL 查询 |
| mysql_drop_db | 丢弃（删除）一个 MySQL 数据库 |
| mysql_errno | 返回上一个 MySQL 操作中的错误信息的数字编码 |
| mysql_error | 返回上一个 MySQL 操作产生的文本错误信息 |
| mysql_escape_string | 转义一个字符串用于 mysql_query |
| mysql_fetch_array | 从结果集中取得一行作为关联数组，或数字数组，或二者兼有 |
| mysql_fetch_assoc | 从结果集中取得一行作为关联数组 |
| mysql_fetch_field | 从结果集中取得列信息并作为对象返回 |
| mysql_fetch_lengths | 取得结果集中每个输出的长度 |
| mysql_fetch_object | 从结果集中取得一行作为对象 |
| mysql_fetch_row | 从结果集中取得一行作为枚举数组 |
| mysql_field_flags | 从结果中取得和指定字段关联的标志 |
| mysql_field_len | 返回指定字段的长度 |
| mysql_field_name | 取得结果中指定字段的字段名 |
| mysql_field_seek | 将结果集中的指针设定为制定的字段偏移量 |
| mysql_field_table | 取得指定字段所在的表名 |
| mysql_field_type | 取得结果集中指定字段的类型 |
| mysql_free_result | 释放结果内存 |
| mysql_get_client_info | 取得 MySQL 客户端信息 |
| mysql_get_host_info | 取得 MySQL 主机信息 |
| mysql_get_proto_info | 取得 MySQL 协议信息 |
| mysql_get_server_info | 取得 MySQL 服务器信息 |
| mysql_info | 取得最近一条查询的信息 |
| mysql_insert_id | 取得上一步 INSERT 操作产生的 ID |
| mysql_list_dbs | 列出 MySQL 服务器中所有的数据库 |
| mysql_list_fields | 列出 MySQL 结果中的字段 |
| mysql_list_processes | 列出 MySQL 进程 |
| mysql_list_tables | 列出 MySQL 数据库中的表 |
| mysql_num_fields | 取得结果集中字段的数目 |
| mysql_num_rows | 取得结果集中行的数目 |
| mysql_pconnect | 打开一个到 MySQL 服务器的持久连接 |
| mysql_ping | Ping 一个服务器连接，如果没有连接则重新连接 |
| mysql_query | 发送一条 MySQL 查询 |
| mysql_real_escape_string | 转义 SQL 语句中使用的字符串中的特殊字符，并考虑到连接的当前字符集 |
| mysql_result | 取得结果数据 |
| mysql_select_db | 选择 MySQL 数据库 |
| mysql_set_charset | 设置客户端的字符集 |
| mysql_stat | 取得当前系统状态 |
| mysql_tablename | 取得表名 |
| mysql_thread_id | 返回当前线程的 ID |
| mysql_unbuffered_query | 向 MySQL 发送一条 SQL 查询，并不获取和缓存结果的行 |
| m_checkstatus | Check to see if a transaction has completed |
| m_completeauthorizations | Number of complete authorizations in queue, returning an array of their identifiers |
| m_connect | Establish the connection to MCVE |
| m_connectionerror | Get a textual representation of why a connection failed |
| m_deletetrans | Delete specified transaction from MCVE_CONN structure |
| m_destroyconn | Destroy the connection and MCVE_CONN structure |
| m_destroyengine | Free memory associated with IP/SSL connectivity |
| m_getcell | Get a specific cell from a comma delimited response by column name |
| m_getcellbynum | Get a specific cell from a comma delimited response by column number |
| m_getcommadelimited | Get the RAW comma delimited data returned from MCVE |
| m_getheader | Get the name of the column in a comma-delimited response |
| m_initconn | Create and initialize an MCVE_CONN structure |
| m_initengine | Ready the client for IP/SSL Communication |
| m_iscommadelimited | Checks to see if response is comma delimited |
| m_maxconntimeout | The maximum amount of time the API will attempt a connection to MCVE |
| m_monitor | Perform communication with MCVE (send/receive data) Non-blocking |
| m_numcolumns | Number of columns returned in a comma delimited response |
| m_numrows | Number of rows returned in a comma delimited response |
| m_parsecommadelimited | Parse the comma delimited response so m_getcell, etc will work |
| m_responsekeys | Returns array of strings which represents the keys that can be used for response parameters on this transaction |
| m_responseparam | Get a custom response parameter |
| m_returnstatus | Check to see if the transaction was successful |
| m_setblocking | Set blocking/non-blocking mode for connection |
| m_setdropfile | Set the connection method to Drop-File |
| m_setip | Set the connection method to IP |
| m_setssl | Set the connection method to SSL |
| m_setssl_cafile | Set SSL CA (Certificate Authority) file for verification of server certificate |
| m_setssl_files | Set certificate key files and certificates if server requires client certificate verification |
| m_settimeout | Set maximum transaction time (per trans) |
| m_sslcert_gen_hash | Generate hash for SSL client certificate verification |
| m_transactionssent | Check to see if outgoing buffer is clear |
| m_transinqueue | Number of transactions in client-queue |
| m_transkeyval | Add key/value pair to a transaction. Replaces deprecated transparam() |
| m_transnew | Start a new transaction |
| m_transsend | Finalize and send the transaction |
| m_uwait | Wait x microsecs |
| m_validateidentifier | Whether or not to validate the passed identifier on any transaction it is passed to |
| m_verifyconnection | Set whether or not to PING upon connect to verify connection |
| m_verifysslcert | Set whether or not to verify the server ssl certificate |
n
| 函数 | 说明 |
|---|---|
| natcasesort | 用“自然排序”算法对数组进行不区分大小写字母的排序 |
| natsort | 用“自然排序”算法对数组排序 |
| ncurses_addch | Add character at current position and advance cursor |
| ncurses_addchnstr | Add attributed string with specified length at current position |
| ncurses_addchstr | Add attributed string at current position |
| ncurses_addnstr | Add string with specified length at current position |
| ncurses_addstr | Output text at current position |
| ncurses_assume_default_colors | Define default colors for color 0 |
| ncurses_attroff | Turn off the given attributes |
| ncurses_attron | Turn on the given attributes |
| ncurses_attrset | Set given attributes |
| ncurses_baudrate | Returns baudrate of terminal |
| ncurses_beep | Let the terminal beep |
| ncurses_bkgd | Set background property for terminal screen |
| ncurses_bkgdset | Control screen background |
| ncurses_border | Draw a border around the screen using attributed characters |
| ncurses_bottom_panel | Moves a visible panel to the bottom of the stack |
| ncurses_can_change_color | Checks if terminal color definitions can be changed |
| ncurses_cbreak | Switch off input buffering |
| ncurses_clear | Clear screen |
| ncurses_clrtobot | Clear screen from current position to bottom |
| ncurses_clrtoeol | Clear screen from current position to end of line |
| ncurses_color_content | Retrieves RGB components of a color |
| ncurses_color_set | Set active foreground and background colors |
| ncurses_curs_set | Set cursor state |
| ncurses_define_key | Define a keycode |
| ncurses_def_prog_mode | Saves terminals (program) mode |
| ncurses_def_shell_mode | Saves terminals (shell) mode |
| ncurses_delay_output | Delay output on terminal using padding characters |
| ncurses_delch | Delete character at current position, move rest of line left |
| ncurses_deleteln | Delete line at current position, move rest of screen up |
| ncurses_delwin | Delete a ncurses window |
| ncurses_del_panel | Remove panel from the stack and delete it (but not the associated window) |
| ncurses_doupdate | Write all prepared refreshes to terminal |
| ncurses_echo | Activate keyboard input echo |
| ncurses_echochar | Single character output including refresh |
| ncurses_end | Stop using ncurses, clean up the screen |
| ncurses_erase | Erase terminal screen |
| ncurses_erasechar | Returns current erase character |
| ncurses_filter | Set LINES for iniscr() and newterm() to 1 |
| ncurses_flash | Flash terminal screen (visual bell) |
| ncurses_flushinp | Flush keyboard input buffer |
| ncurses_getch | Read a character from keyboard |
| ncurses_getmaxyx | Returns the size of a window |
| ncurses_getmouse | Reads mouse event |
| ncurses_getyx | Returns the current cursor position for a window |
| ncurses_halfdelay | Put terminal into halfdelay mode |
| ncurses_has_colors | Checks if terminal has color capabilities |
| ncurses_has_ic | Check for insert- and delete-capabilities |
| ncurses_has_il | Check for line insert- and delete-capabilities |
| ncurses_has_key | Check for presence of a function key on terminal keyboard |
| ncurses_hide_panel | Remove panel from the stack, making it invisible |
| ncurses_hline | Draw a horizontal line at current position using an attributed character and max. n characters long |
| ncurses_inch | Get character and attribute at current position |
| ncurses_init | Initialize ncurses |
| ncurses_init_color | Define a terminal color |
| ncurses_init_pair | Define a color pair |
| ncurses_insch | Insert character moving rest of line including character at current position |
| ncurses_insdelln | Insert lines before current line scrolling down (negative numbers delete and scroll up) |
| ncurses_insertln | Insert a line, move rest of screen down |
| ncurses_insstr | Insert string at current position, moving rest of line right |
| ncurses_instr | Reads string from terminal screen |
| ncurses_isendwin | Ncurses is in endwin mode, normal screen output may be performed |
| ncurses_keyok | Enable or disable a keycode |
| ncurses_keypad | Turns keypad on or off |
| ncurses_killchar | Returns current line kill character |
| ncurses_longname | Returns terminals description |
| ncurses_meta | Enables/Disable 8-bit meta key information |
| ncurses_mouseinterval | Set timeout for mouse button clicks |
| ncurses_mousemask | Sets mouse options |
| ncurses_mouse_trafo | Transforms coordinates |
| ncurses_move | Move output position |
| ncurses_move_panel | Moves a panel so that its upper-left corner is at [startx, starty] |
| ncurses_mvaddch | Move current position and add character |
| ncurses_mvaddchnstr | Move position and add attributed string with specified length |
| ncurses_mvaddchstr | Move position and add attributed string |
| ncurses_mvaddnstr | Move position and add string with specified length |
| ncurses_mvaddstr | Move position and add string |
| ncurses_mvcur | Move cursor immediately |
| ncurses_mvdelch | Move position and delete character, shift rest of line left |
| ncurses_mvgetch | Move position and get character at new position |
| ncurses_mvhline | Set new position and draw a horizontal line using an attributed character and max. n characters long |
| ncurses_mvinch | Move position and get attributed character at new position |
| ncurses_mvvline | Set new position and draw a vertical line using an attributed character and max. n characters long |
| ncurses_mvwaddstr | Add string at new position in window |
| ncurses_napms | Sleep |
| ncurses_newpad | Creates a new pad (window) |
| ncurses_newwin | Create a new window |
| ncurses_new_panel | Create a new panel and associate it with window |
| ncurses_nl | Translate newline and carriage return / line feed |
| ncurses_nocbreak | Switch terminal to cooked mode |
| ncurses_noecho | Switch off keyboard input echo |
| ncurses_nonl | Do not translate newline and carriage return / line feed |
| ncurses_noqiflush | Do not flush on signal characters |
| ncurses_noraw | Switch terminal out of raw mode |
| ncurses_pair_content | Retrieves foreground and background colors of a color pair |
| ncurses_panel_above | Returns the panel above panel |
| ncurses_panel_below | Returns the panel below panel |
| ncurses_panel_window | Returns the window associated with panel |
| ncurses_pnoutrefresh | Copies a region from a pad into the virtual screen |
| ncurses_prefresh | Copies a region from a pad into the virtual screen |
| ncurses_putp | Apply padding information to the string and output it |
| ncurses_qiflush | Flush on signal characters |
| ncurses_raw | Switch terminal into raw mode |
| ncurses_refresh | Refresh screen |
| ncurses_replace_panel | Replaces the window associated with panel |
| ncurses_resetty | Restores saved terminal state |
| ncurses_reset_prog_mode | Resets the prog mode saved by def_prog_mode |
| ncurses_reset_shell_mode | Resets the shell mode saved by def_shell_mode |
| ncurses_savetty | Saves terminal state |
| ncurses_scrl | Scroll window content up or down without changing current position |
| ncurses_scr_dump | Dump screen content to file |
| ncurses_scr_init | Initialize screen from file dump |
| ncurses_scr_restore | Restore screen from file dump |
| ncurses_scr_set | Inherit screen from file dump |
| ncurses_show_panel | Places an invisible panel on top of the stack, making it visible |
| ncurses_slk_attr | Returns current soft label key attribute |
| ncurses_slk_attroff | Turn off the given attributes for soft function-key labels |
| ncurses_slk_attron | Turn on the given attributes for soft function-key labels |
| ncurses_slk_attrset | Set given attributes for soft function-key labels |
| ncurses_slk_clear | Clears soft labels from screen |
| ncurses_slk_color | Sets color for soft label keys |
| ncurses_slk_init | Initializes soft label key functions |
| ncurses_slk_noutrefresh | Copies soft label keys to virtual screen |
| ncurses_slk_refresh | Copies soft label keys to screen |
| ncurses_slk_restore | Restores soft label keys |
| ncurses_slk_set | Sets function key labels |
| ncurses_slk_touch | Forces output when ncurses_slk_noutrefresh is performed |
| ncurses_standend | Stop using ‘standout’ attribute |
| ncurses_standout | Start using ‘standout’ attribute |
| ncurses_start_color | Initializes color functionality |
| ncurses_termattrs | Returns a logical OR of all attribute flags supported by terminal |
| ncurses_termname | Returns terminals (short)-name |
| ncurses_timeout | Set timeout for special key sequences |
| ncurses_top_panel | Moves a visible panel to the top of the stack |
| ncurses_typeahead | Specify different filedescriptor for typeahead checking |
| ncurses_ungetch | Put a character back into the input stream |
| ncurses_ungetmouse | Pushes mouse event to queue |
| ncurses_update_panels | Refreshes the virtual screen to reflect the relations between panels in the stack |
| ncurses_use_default_colors | Assign terminal default colors to color id -1 |
| ncurses_use_env | Control use of environment information about terminal size |
| ncurses_use_extended_names | Control use of extended names in terminfo descriptions |
| ncurses_vidattr | Display the string on the terminal in the video attribute mode |
| ncurses_vline | Draw a vertical line at current position using an attributed character and max. n characters long |
| ncurses_waddch | Adds character at current position in a window and advance cursor |
| ncurses_waddstr | Outputs text at current postion in window |
| ncurses_wattroff | Turns off attributes for a window |
| ncurses_wattron | Turns on attributes for a window |
| ncurses_wattrset | Set the attributes for a window |
| ncurses_wborder | Draws a border around the window using attributed characters |
| ncurses_wclear | Clears window |
| ncurses_wcolor_set | Sets windows color pairings |
| ncurses_werase | Erase window contents |
| ncurses_wgetch | Reads a character from keyboard (window) |
| ncurses_whline | Draws a horizontal line in a window at current position using an attributed character and max. n characters long |
| ncurses_wmouse_trafo | Transforms window/stdscr coordinates |
| ncurses_wmove | Moves windows output position |
| ncurses_wnoutrefresh | Copies window to virtual screen |
| ncurses_wrefresh | Refresh window on terminal screen |
| ncurses_wstandend | End standout mode for a window |
| ncurses_wstandout | Enter standout mode for a window |
| ncurses_wvline | Draws a vertical line in a window at current position using an attributed character and max. n characters long |
| newt_bell | Send a beep to the terminal |
| newt_button | Create a new button |
| newt_button_bar | This function returns a grid containing the buttons created. |
| newt_centered_window | Open a centered window of the specified size |
| newt_checkbox | 说明 |
| newt_checkbox_get_value | Retreives value of checkox resource |
| newt_checkbox_set_flags | Configures checkbox resource |
| newt_checkbox_set_value | Sets the value of the checkbox |
| newt_checkbox_tree | 说明 |
| newt_checkbox_tree_add_item | Adds new item to the checkbox tree |
| newt_checkbox_tree_find_item | Finds an item in the checkbox tree |
| newt_checkbox_tree_get_current | Returns checkbox tree selected item |
| newt_checkbox_tree_get_entry_value | 说明 |
| newt_checkbox_tree_get_multi_selection | 说明 |
| newt_checkbox_tree_get_selection | 说明 |
| newt_checkbox_tree_multi | 说明 |
| newt_checkbox_tree_set_current | 说明 |
| newt_checkbox_tree_set_entry | 说明 |
| newt_checkbox_tree_set_entry_value | 说明 |
| newt_checkbox_tree_set_width | 说明 |
| newt_clear_key_buffer | Discards the contents of the terminal’s input buffer without waiting for additional input |
| newt_cls | 说明 |
| newt_compact_button | 说明 |
| newt_component_add_callback | 说明 |