.exe is not a valid Win32 application
这篇文章考查的现象是：.exe文件因为文件系统的损坏或者没有注册而打不开。有时启动可执行文件，会出现提示：这个文件是无效的Win32应用程序。这篇文章为用户解决这个问题。本文强调出现这个错误的原因既而为这个错误提供补救措施。在这里讨论的几种情况是：文件下载，错误配置的IDE控制器，CD/DVD支持不可用，文件的损坏或者未注册，间谍软件和有问题的浏览量配置。
1. 下载文件
2. 错误配置的IDE控制器
3.CD/DVD支持不可用
4.文件系统损坏
5. 文件未注册
6.病毒/间谍软件
7. 浏览器配置问题
8. 参阅：不是有效的Win32 应用程序
当你启动一个可执行文件时，Windows操作系统提示以下错误信息：应用程序名不是有效的应用程序。.exe是文可执行的后缀名。不同的操作系统有不同的文件格式，通过字母组成的后缀名来区别他们。
下载文件
错误配置的IDE控制器
D/DVD支持不可用
文件系统损坏
文件未注册
病毒/间谍软件
浏览器配置问题
下载文件
如果有问题的应用程序上传到互联网，在下载的过程中很有可能出现这个问题。在这种情况下，重新下载此文件。
错误配置的IDE控制器
右键单击我的电脑然后选择属性
在系统属性中，选择硬件标签页然后选择设备管理器
双击IDE ATA /ATAPI控制器
双击主要IDE通道和次要IDE通道
在高级选项标签页中，在设备0上，确保该命令设置DMA如果可用或者仅仅PIO可用。
CD/DVD支持不可用
如果这个错误是由有缺陷的媒体所致，按照以下步骤操作：
试着在其他驱动器上读CD/DVD
用湿软布（不要用肥皂）清洗
试着用WinISO（免费版本）类似的软件取回数据，Win ISO可用恢复被损害的数据
文件系统损坏
检查被保护系统文件的完整性，执行以下命令：
sfc/scannow
文件未注册
如果这个错误发生在打开的文件的身上，单击开始/运行，然后输入和确认以下命令：
regsvr32 / i SHELL32.DLL
病毒/间谍软件
出现这个问题很可能是受Bagle病毒的感染。欲了解更多信息，访问以下网站来为你的个人电脑杀毒：
http://en.kioskea.net/faq/sujet681 virus removal pack for w32 beagle mm
浏览器配置问题
取消来自IE（InternetExplorer）或者火狐的连接
双击IE（即使你只使用火狐）
工具------>互联网选项------>安全标签页
验证你的安全等级是中高而不是高级
验证确定
取消连接
重新打开连接
参阅：
不是有效的win32 应用程序
本文由Wentasy逐字逐句翻译，请尊重劳动成果。转载请注明出处。
http://blog.csdn.net/wentasy/article/details/7759785
译文原文：http://en.kioskea.net/faq/1591-exe-is-not-a-valid-win32-application
This article examines the scenario of .exe files not opening due to a corrupt file system or an unregistered file. Sometimes while launching an .exe file, an error occurs where the file is termed as an invalid Win32 application. This article solves this problem for the user. It highlights the reasons for the error and subsequently provides remedies for it. The various situations discussed here are: File downloads, a badly configured IDE Controller, support CD/DVD unreadable, a corrupted or unregistered file, spyware and a problematic browser configuration.
- Downloaded file
- IDE controller badly configured
- CD / DVD is unreadable
- File system corrupt
- File unregistered
- Virus/spyware
- Problem with browser configuration
- See also: Is not a valid win32 application
When you launch an executable file, Windows displays a message like:
Application name is not a valid Win32 application
.exe is a file execution extension. There are different file formats for different systems that are identifiable with the help of different alphabets that accompany them.
- File download
- IDE Controller badly configured
- Support CD / DVD unreadable
- File system corrupted
- File unregistered
- Virus / spyware
- Problem with browser configuration
Downloaded file
If the application in question was uploaded to the Internet, it is possible that it was corrupted during the download. In this case, just download the file again.IDE controller badly configured
- Right click on My Computer and select "Properties".
- In System Properties, select the Hardware tab then Device Manager.
- Double-click the IDE ATA / ATAPI controllers.
- Double-click on Primary IDE Channel and Secondary IDE channel.
- In the tab "Advanced Settings", under Device 0, ensure the command is set to DMA if available and not PIO only.
CD / DVD is unreadable
If the error is caused by a defective media, follow the steps below:- Try to read the CD / DVD in another drive
- Clean with a soft cloth and water (no soap)
- Attempt to retrieve the data with software such as Win ISO (free version), which will retrieve the damaged file
File system corrupt
To check the integrity of protected system files, run the following command:sfc/scannow
File unregistered
If the error occurs at the opening of files, click Start / Run, then enter and confirm the following command:regsvr32 / i SHELL32.DLL
Virus/spyware
The problem is most likely a Bagle Infection. For more information, please visit this site in order to disinfect your PC:http://en.kioskea.net/faq/sujet 681 virus removal pack for w32 beagle mm
Problem with browser configuration
- Disconnect from IE (Internet Explorer) or Firefox
- Double click on IE (even if you only use Firefox)
- Tools> Internet Options> Security Tab
- Verify that the security level for this zone is medium-high and high NO.
- Validate OK
- Disconnect
- Reconnect
- Is not a valid win32 application