在Linux内核中常用的驱动时字符设备驱动,常常在dev目录下创建我们驱动的设备节点,但是在proc目录和sys目录下也有与
我们设备去哦那个相关的属性值,以proc文件的文件属性的驱动为例。
对于proc目录下的驱动编写与字符驱动的编写流程一致,并且文件的结构体也是一样的,只是创捷proc的节点的方式不太一样,他有一个目录的创建,在字符驱动中可能也是有目录的创建,只是笔者没见过而已
驱动示例代码:proc_drv.c
// proc_drv.c
#include
#include
#include
#include
#include
#include
#include
#define IGH_EC_PROC_DIR "test"
#define IGH_GFAR_PROC_NAME "value"
static int test_proc_show(struct seq_file *m, void *v);
static int test_proc_open(struct inode *inode, struct file *file);
static ssize_t test_proc_write(struct file *file, const char __user *buffer, size_t count, loff_t *f_pos);
static int test_proc_init(void);
static void test_proc_exit(void);
static int test_proc_show(struct seq_file *m, void *v)
{
return 0;
}
static int test_proc_open(struct inode *inode, struct file *file)
{
return single_open(file, test_proc_show, NULL);
}
static ssize_t test_proc_write(struct file *file, const char __user *buffer, size_t count, loff_t *f_pos)
{
#if 0
char *tmp = kzalloc((count+1), GFP_KERNEL);
if (!tmp)
return -ENOMEM;
if (copy_from_user(tmp,buffer,count)) {
kfree(tmp);
return -EFAULT;
}
printk("%s Get user str :%s\n", __func__, tmp);
kfree(tmp);
return count;
#endif
size_t ret = count;
return (ret + 1);
}
ssize_t test_proc_read(struct file *file, char __user *buf, size_t len, loff_t *off)
{
#if 0
int len_copy, ret;
char data[32] = "1234566789";
// fl->f_pos表示当前文件描述符对文件的偏移, len表示用户进程想要读的大小
if ((file->f_pos + len) > strlen(data)) //如果剩下没读的数据长度少于len,则只复制出剩下没读部分
len_copy = strlen(data) - file->f_pos;
else
len_copy = len; //如果剩下的数据长度超出len,则本次复制len字节
ret = copy_to_user(buf, data+file->f_pos, len_copy);
//内容复制后,需要改变文件描述符的位置偏移
*off += len_copy - ret; //在read/write函数里必须通过off来改变
return len_copy - ret;
#endif
int ret = len;
return (ret + 1);
}
static struct file_operations test_proc_fops = {
.owner = THIS_MODULE,
.open = test_proc_open,
.release = single_release,
.read = test_proc_read,
.llseek = seq_lseek,
.write = test_proc_write,
};
struct proc_dir_entry *test_proc_dir = NULL;
static int test_proc_init(void)
{
struct proc_dir_entry* file;
test_proc_dir = proc_mkdir(IGH_EC_PROC_DIR, NULL);
if (test_proc_dir == NULL) {
printk("%s proc create %s failed\n", __func__, IGH_EC_PROC_DIR);
return -EINVAL;
}
file = proc_create(IGH_GFAR_PROC_NAME, 0777, test_proc_dir, &test_proc_fops);
if (!file) {
printk("%s proc_create failed!\n", __func__);
return -ENOMEM;
}
return 0;
}
static void test_proc_exit(void)
{
remove_proc_entry(IGH_GFAR_PROC_NAME, test_proc_dir);
remove_proc_entry(IGH_EC_PROC_DIR, NULL);
}
static int __init my_init(void)
{
test_proc_init();
return 0;
}
static void __exit my_exit(void)
{
test_proc_exit();
}
module_init(my_init);
module_exit(my_exit);
MODULE_AUTHOR("wangsheng");
MODULE_LICENSE("GPL");
Makefile
obj-m := proc_drv.o
KERNELDIR := /lib/modules/$(shell uname -r)/build
PWD := $(shell pwd)
modules:
$(MAKE) -C $(KERNELDIR) M=$(PWD) modules
clean:
$(MAKE) -C $(KERNELDIR) M=$(PWD) clean
编译驱动,然后将驱动加载到系统中,就会在/proc/test/产生一个value的属性节点
应用层的测试程序:proc_test.c
#include
#include
#include
#include
#include
#include
#include
int main (int argc, char *argv[])
{
int fd = -1;
int ret = -1;
char buf[1024] = {0};
int i = 0;
// 打开
fd = open ("/proc/test/value", O_RDWR);
if (fd < 0) {
printf ("open error.\n");
return -1;
}
// 写
ret = write (fd, "abcdefg", strlen ("abcdefg"));
if (ret < 0) {
printf ("write error.\n");
return -1;
}
// 读
ret = read (fd, buf, 16);
if (ret < 0) {
printf ("read error.\n");
return -1;
}
for (i = 0; i < 16; ++i) {
printf ("%.2x ", buf[i]);
}
printf ("\n");
// 关闭
close (fd);
return 0;
}
使用用用程序测试驱动程序。