[zz]sheep dog的readme
sheepdog ppt 中文ppt
http://www.slideshare.net/multics/sheepdog
Sheepdog: Distributed Storage System for KVM ============================================ Overview -------- Sheepdog is a distributed storage system for KVM/QEMU. It provides highly available block level storage volumes to virtual machines. Sheepdog supports advanced volume management features such as snapshot, cloning, and thin provisioning. The architecture of Sheepdog is fully symmetric; there is no central node such as a meta-data server. Sheepdog is an Open Source software, released under the terms of the GNU General Public License version 2. For the latest information about Sheepdog, please visit our website at: http://www.osrg.net/sheepdog/ Requirements ------------ * Three or more x86-64 machines * Corosync cluster engine Install ------- Please read the INSTALL file distributed with this package for detailed instructions on installing or compiling from source. Usage ----- * Configure corosync. Reference the corosync(8) and corosync.conf(5) man page for further details. * Setup Sheepdog 1. Launch sheepdog on each machines of the cluster. $ sheep /store_dir Notes: /store_dir is a directory to store objects. The directory must be on the filesystem with an xattr support. In case of ext3, you need to add 'user_xattr' to the mount options. $ sudo mount -o remount,user_xattr /store_device 2. Make fs $ collie cluster format --copies=3 --copies specifies the number of default data redundancy. In this case, the replicated data is stored on three machines. 3. Check cluster state Following list shows that Sheepdog is running on 32 nodes. $ collie node list Idx Node id (FNV-1a) - Host:Port ------------------------------------------------ 0 0308164db75cff7e - 10.68.13.15:7000 * 1 03104d8b4315c8e4 - 10.68.13.1:7000 2 0ab18c565bc14aea - 10.68.13.3:7000 3 0c0d27f0ac395f5d - 10.68.13.16:7000 4 127ee4802991f308 - 10.68.13.13:7000 5 135ff2beab2a9809 - 10.68.14.5:7000 6 17bd6240eab65870 - 10.68.14.4:7000 7 1cf35757cbf47d7b - 10.68.13.10:7000 8 1df9580b8960a992 - 10.68.13.11:7000 9 29307d3fa5a04f78 - 10.68.14.12:7000 10 29dcb3474e31d4f3 - 10.68.14.15:7000 11 29e089c98dd2a144 - 10.68.14.16:7000 12 2a118b7e2738f479 - 10.68.13.4:7000 13 3d6aea26ba79d75f - 10.68.13.6:7000 14 42f9444ead801767 - 10.68.14.11:7000 15 562c6f38283d09fe - 10.68.14.2:7000 16 5dd5e540cca1556a - 10.68.14.6:7000 17 6c12a5d10f10e291 - 10.68.14.13:7000 18 6dae1d955ca72d96 - 10.68.13.7:7000 19 711db0f5fa40b412 - 10.68.14.14:7000 20 7c6b95212ee7c085 - 10.68.14.9:7000 21 7d010c31bf11df73 - 10.68.13.2:7000 22 82c43e908b1f3f01 - 10.68.13.12:7000 23 931d2de0aaf61cf5 - 10.68.13.8:7000 24 961d9d391e6021e7 - 10.68.13.14:7000 25 9a3ef6fa1081026c - 10.68.13.9:7000 26 b0b3d300fed8bc26 - 10.68.14.10:7000 27 b0f08fb98c8f5edc - 10.68.14.8:7000 28 b9cc316dc5aba880 - 10.68.13.5:7000 29 d9eda1ec29c2eeeb - 10.68.14.7:7000 30 e53cebb2617c86fd - 10.68.14.1:7000 31 ea46913c4999ccdf - 10.68.14.3:7000 * Create a virtual machine image 1. Create a 256 GB virtual machine image of Alice. $ qemu-img create sheepdog:Alice 256G 2. You can also convert from existing KVM images to Sheepdog ones. $ qemu-img convert ~/amd64.raw sheepdog:Bob 3. See Sheepdog images by the following command. $ collie vdi list name id size used shared creation time object id -------------------------------------------------------------------- Bob 0 2.0 GB 1.6 GB 0.0 MB 2010-03-23 16:16 80000 Alice 0 256 GB 0.0 MB 0.0 MB 2010-03-23 16:16 40000 * Boot the virtual machine 1. Boot the virtual machine. $ qemu-system-x86_64 -hda sheepdog:Alice 2. Following command checks used images. $ collie vm list Name |Vdi size |Allocated| Shared | Status ----------------+---------+---------+---------+------------ Bob | 2.0 GB| 1.6 GB| 0.0 MB| running on xx.xx.xx.xx Alice | 256 GB| 0.0 MB| 0.0 MB| not running * Snapshot 1. Snapshot $ qemu-img snapshot -c name sheepdog:Alice -c flag is meaningless currently 2. After getting snapshot, a new virtual machine images are added as a not- current image. $ collie vdi list name id size used shared creation time object id -------------------------------------------------------------------- Bob 0 2.0 GB 1.6 GB 0.0 MB 2010-03-23 16:16 80000 Alice 0 256 GB 0.0 MB 0.0 MB 2010-03-23 16:21 c0000 s Alice 1 256 GB 0.0 MB 0.0 MB 2010-03-23 16:16 40000 3. You can boot from the snapshot image by spcifing tag id $ qemu-system-x86_64 -hda sheepdog:Alice:1 * Cloning from the snapshot 1. Create a Charlie image as a clone of Alice's image. $ qemu-img create -b sheepdog:Alice:1 sheepdog:Charlie 2. Charlie's image is added to the virtual machine list. $ collie vdi list name id size used shared creation time object id -------------------------------------------------------------------- Bob 0 2.0 GB 1.6 GB 0.0 MB 2010-03-23 16:16 80000 Alice 0 256 GB 0.0 MB 0.0 MB 2010-03-23 16:21 c0000 s Alice 1 256 GB 0.0 MB 0.0 MB 2010-03-23 16:16 40000 Charlie 0 256 GB 0.0 MB 0.0 MB 2010-03-23 16:23 100000 Test Environment ---------------- - Debian squeeze amd64 - Debian lenny amd64 =============================================================================== Copyright (C) 2009-2011, Nippon Telegraph and Telephone Corporation.
Hi everyone,
Sheepdog is a distributed storage system for KVM/QEMU. It provides
highly available block level storage volumes to VMs like Amazon EBS.
Sheepdog supports advanced volume management features such as snapshot,
cloning, and thin provisioning. Sheepdog runs on several tens or hundreds
of nodes, and the architecture is fully symmetric; there is no central
node such as a meta-data server.
The following list describes the features of Sheepdog.
* Linear scalability in performance and capacity
* No single point of failure
* Redundant architecture (data is written to multiple nodes)
- Tolerance against network failure
* Zero configuration (newly added machines will join the cluster automatically)
- Autonomous load balancing
* Snapshot
- Online snapshot from qemu-monitor
* Clone from a snapshot volume
* Thin provisioning
- Amazon EBS API support (to use from a Eucalyptus instance)
(* = current features, - = on our todo list)
More details and download links are here:
http://www.osrg.net/sheepdog/
Note that the code is still in an early stage.
There are some critical TODO items:
- VM image deletion support
- Support architectures other than X86_64
- Data recoverys
- Free space management
- Guarantee reliability and availability under heavy load
- Performance improvement
- Reclaim unused blocks
- More documentation
We hope finding people interested in working together.
Enjoy!
Here are examples:
- create images
$ kvm-img create -f sheepdog "Alice's Disk" 256G
$ kvm-img create -f sheepdog "Bob's Disk" 256G
- list images
$ shepherd info -t vdi
40000 : Alice's Disk 256 GB (allocated: 0 MB, shared: 0 MB), 2009-10-15
16:17:18, tag: 0, current
80000 : Bob's Disk 256 GB (allocated: 0 MB, shared: 0 MB), 2009-10-15
16:29:20, tag: 0, current
- start up a virtual machine
$ kvm --drive format=sheepdog,file="Alice's Disk"
- create a snapshot
$ kvm-img snapshot -c name sheepdog:"Alice's Disk"
- clone from a snapshot
$ kvm-img create -b sheepdog:"Alice's Disk":0 -f sheepdog "Charlie's Disk"
Thanks.
--
MORITA, Kazutaka
NTT Cyber Space Labs
OSS Computing Project
Kernel Group
E-mail: [email protected]
Sheepdog is a distributed storage system for KVM/QEMU. It provides
highly available block level storage volumes to VMs like Amazon EBS.
Sheepdog supports advanced volume management features such as snapshot,
cloning, and thin provisioning. Sheepdog runs on several tens or hundreds
of nodes, and the architecture is fully symmetric; there is no central
node such as a meta-data server.
The following list describes the features of Sheepdog.
* Linear scalability in performance and capacity
* No single point of failure
* Redundant architecture (data is written to multiple nodes)
- Tolerance against network failure
* Zero configuration (newly added machines will join the cluster automatically)
- Autonomous load balancing
* Snapshot
- Online snapshot from qemu-monitor
* Clone from a snapshot volume
* Thin provisioning
- Amazon EBS API support (to use from a Eucalyptus instance)
(* = current features, - = on our todo list)
More details and download links are here:
http://www.osrg.net/sheepdog/
Note that the code is still in an early stage.
There are some critical TODO items:
- VM image deletion support
- Support architectures other than X86_64
- Data recoverys
- Free space management
- Guarantee reliability and availability under heavy load
- Performance improvement
- Reclaim unused blocks
- More documentation
We hope finding people interested in working together.
Enjoy!
Here are examples:
- create images
$ kvm-img create -f sheepdog "Alice's Disk" 256G
$ kvm-img create -f sheepdog "Bob's Disk" 256G
- list images
$ shepherd info -t vdi
40000 : Alice's Disk 256 GB (allocated: 0 MB, shared: 0 MB), 2009-10-15
16:17:18, tag: 0, current
80000 : Bob's Disk 256 GB (allocated: 0 MB, shared: 0 MB), 2009-10-15
16:29:20, tag: 0, current
- start up a virtual machine
$ kvm --drive format=sheepdog,file="Alice's Disk"
- create a snapshot
$ kvm-img snapshot -c name sheepdog:"Alice's Disk"
- clone from a snapshot
$ kvm-img create -b sheepdog:"Alice's Disk":0 -f sheepdog "Charlie's Disk"
Thanks.
--
MORITA, Kazutaka
NTT Cyber Space Labs
OSS Computing Project
Kernel Group
E-mail: [email protected]