作者：ChamPly
安装CentOS
1.安装net-tools
[root@localhost ~]# yum install -y net-tools
2.关闭firewalld
[root@localhost ~]# systemctl stop firewalld && systemctl disable firewalld
Removed symlink /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
[root@localhost ~]# setenforce 0
[root@localhost ~]# sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config
安装Docker
如今Docker分为了Docker-CE和Docker-EE两个版本，CE为社区版即免费版，EE为企业版即商业版。我们选择使用CE版。
1.安装yum源工具包
[root@localhost ~]# yum install -y yum-utils device-mapper-persistent-data lvm2
2.下载docker-ce官方的yum源配置文件
[root@localhost ~]# yum-config-manager --add-repo https://download.docker.com/l...
3.禁用docker-c-edge源配edge是不开发版，不稳定，下载stable版
yum-config-manager --disable docker-ce-edge
4.更新本地YUM源缓存
yum makecache fast
5.安装Docker-ce相应版本的
yum -y install docker-ce
6.运行hello world
[root@localhost ~]# systemctl start docker
[root@localhost ~]# docker run hello-world
Unable to find image 'hello-world:latest' locally
latest: Pulling from library/hello-world
9a0669468bf7: Pull complete
Digest: sha256:0e06ef5e1945a718b02a8c319e15bae44f47039005530bc617a5d071190ed3fc
Status: Downloaded newer image for hello-world:latest
Hello from Docker!
This message shows that your installation appears to be working correctly.
To generate this message, Docker took the following steps:
- The Docker client contacted the Docker daemon.
- The Docker daemon pulled the "hello-world" image from the Docker Hub.
- The Docker daemon created a new container from that image which runs the
executable that produces the output you are currently reading. - The Docker daemon streamed that output to the Docker client, which sent it
to your terminal.
To try something more ambitious, you can run an Ubuntu container with:
$ docker run -it ubuntu bash
Share images, automate workflows, and more with a free Docker ID:
https://cloud.docker.com/
For more examples and ideas, visit:
https://docs.docker.com/engin...
安装kubelet与kubeadm包
使用kubeadm init命令初始化集群之下载Docker镜像到所有主机的实始化时会下载kubeadm必要的依赖镜像，同时安装etcd,kube-dns,kube-proxy,由于我们GFW防火墙问题我们不能直接访问，因此先通过其它方法下载下面列表中的镜像，然后导入到系统中，再使用kubeadm init来初始化集群
1.使用DaoCloud加速器(可以跳过这一步)
[root@localhost ~]# curl -sSL https://get.daocloud.io/daoto... | sh -s http://0d236e3f.m.daocloud.io
docker version >= 1.12
{"registry-mirrors": ["http://0d236e3f.m.daocloud.io"]}
Success.
You need to restart docker to take effect: sudo systemctl restart docker
[root@localhost ~]# systemctl restart docker
2.下载镜像,自己通过Dockerfile到dockerhub生成对镜像,也可以克隆我的
images=(kube-controller-manager-amd64 etcd-amd64 k8s-dns-sidecar-amd64 kube-proxy-amd64 kube-apiserver-amd64 kube-scheduler-amd64 pause-amd64 k8s-dns-dnsmasq-nanny-amd64 k8s-dns-kube-dns-amd64)
for imageName in ${images[@]} ; do
docker pull champly/$imageName
docker tag champly/$imageName gcr.io/google_containers/$imageName
docker rmi champly/$imageName
done
3.修改版本
docker tag gcr.io/google_containers/etcd-amd64 gcr.io/google_containers/etcd-amd64:3.0.17 && \
docker rmi gcr.io/google_containers/etcd-amd64 && \
docker tag gcr.io/google_containers/k8s-dns-dnsmasq-nanny-amd64 gcr.io/google_containers/k8s-dns-dnsmasq-nanny-amd64:1.14.5 && \
docker rmi gcr.io/google_containers/k8s-dns-dnsmasq-nanny-amd64 && \
docker tag gcr.io/google_containers/k8s-dns-kube-dns-amd64 gcr.io/google_containers/k8s-dns-kube-dns-amd64:1.14.5 && \
docker rmi gcr.io/google_containers/k8s-dns-kube-dns-amd64 && \
docker tag gcr.io/google_containers/k8s-dns-sidecar-amd64 gcr.io/google_containers/k8s-dns-sidecar-amd64:1.14.2 && \
docker rmi gcr.io/google_containers/k8s-dns-sidecar-amd64 && \
docker tag gcr.io/google_containers/kube-apiserver-amd64 gcr.io/google_containers/kube-apiserver-amd64:v1.7.5 && \
docker rmi gcr.io/google_containers/kube-apiserver-amd64 && \
docker tag gcr.io/google_containers/kube-controller-manager-amd64 gcr.io/google_containers/kube-controller-manager-amd64:v1.7.5 && \
docker rmi gcr.io/google_containers/kube-controller-manager-amd64 && \
docker tag gcr.io/google_containers/kube-proxy-amd64 gcr.io/google_containers/kube-proxy-amd64:v1.6.0 && \
docker rmi gcr.io/google_containers/kube-proxy-amd64 && \
docker tag gcr.io/google_containers/kube-scheduler-amd64 gcr.io/google_containers/kube-scheduler-amd64:v1.7.5 && \
docker rmi gcr.io/google_containers/kube-scheduler-amd64 && \
docker tag gcr.io/google_containers/pause-amd64 gcr.io/google_containers/pause-amd64:3.0 && \
docker rmi gcr.io/google_containers/pause-amd64
4.添加阿里源
[root@localhost ~]# cat >> /etc/yum.repos.d/kubernetes.repo << EOF
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/ku...
enabled=1
gpgcheck=0
EOF
5.查看kubectl kubelet kubeadm kubernetes-cni列表
[root@localhost ~]# yum list kubectl kubelet kubeadm kubernetes-cni
已加载插件：fastestmirror
Loading mirror speeds from cached hostfile
- base: mirrors.tuna.tsinghua.edu.cn
- extras: mirrors.sohu.com
- updates: mirrors.sohu.com
可安装的软件包
kubeadm.x86_64 1.7.5-0 kubernetes
kubectl.x86_64 1.7.5-0 kubernetes
kubelet.x86_64 1.7.5-0 kubernetes
kubernetes-cni.x86_64 0.5.1-0 kubernetes
[root@localhost ~]#
6.安装kubectl kubelet kubeadm kubernetes-cni
[root@localhost ~]# yum install -y kubectl kubelet kubeadm kubernetes-cni
修改cgroups
vi /etc/systemd/system/kubelet.service.d/10-kubeadm.conf
update KUBELET_CGROUP_ARGS=--cgroup-driver=systemd to KUBELET_CGROUP_ARGS=--cgroup-driver=cgroupfs
修改kubelet中的cAdvisor监控的端口，默认为0改为4194，这样就可以通过浏器查看kubelet的监控cAdvisor的web页
[root@kub-master ~]# vi /etc/systemd/system/kubelet.service.d/10-kubeadm.conf
Environment="KUBELET_CADVISOR_ARGS=--cadvisor-port=4194"
启动所有主机上的kubelet服务
[root@master ~]# systemctl enable kubelet && systemctl start kubelet
初始化master master节点上操作
[root@master ~]# kubeadm reset && kubeadm init --apiserver-advertise-address=192.168.0.100 --kubernetes-version=v1.7.5 --pod-network-cidr=10.200.0.0/16
[preflight] Running pre-flight checks
[reset] Stopping the kubelet service
[reset] Unmounting mounted directories in "/var/lib/kubelet"
[reset] Removing kubernetes-managed containers
[reset] Deleting contents of stateful directories: [/var/lib/kubelet /etc/cni/net.d /var/lib/dockershim /var/lib/etcd]
[reset] Deleting contents of config directories: [/etc/kubernetes/manifests /etc/kubernetes/pki]
[reset] Deleting files: [/etc/kubernetes/admin.conf /etc/kubernetes/kubelet.conf /etc/kubernetes/controller-manager.conf /etc/kubernetes/scheduler.conf]
[kubeadm] WARNING: kubeadm is in beta, please do not use it for production clusters.
[init] Using Kubernetes version: v1.7.5
[init] Using Authorization modes: [Node RBAC]
[preflight] Running pre-flight checks
[preflight] WARNING: docker version is greater than the most recently validated version. Docker version: 17.09.0-ce. Max validated version: 1.12
[preflight] Starting the kubelet service
[kubeadm] WARNING: starting in 1.8, tokens expire after 24 hours by default (if you require a non-expiring token use --token-ttl 0)
[certificates] Generated CA certificate and key.
[certificates] Generated API server certificate and key.
[certificates] API Server serving cert is signed for DNS names [master kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 192.168.0.100]
[certificates] Generated API server kubelet client certificate and key.
[certificates] Generated service account token signing key and public key.
[certificates] Generated front-proxy CA certificate and key.
[certificates] Generated front-proxy client certificate and key.
[certificates] Valid certificates and keys now exist in "/etc/kubernetes/pki"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/admin.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/kubelet.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/controller-manager.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/scheduler.conf"
[apiclient] Created API client, waiting for the control plane to become ready
[apiclient] All control plane components are healthy after 34.002949 seconds
[token] Using token: 0696ed.7cd261f787453bd9
[apiconfig] Created RBAC rules
[addons] Applied essential addon: kube-proxy
[addons] Applied essential addon: kube-dns
Your Kubernetes master has initialized successfully!
To start using your cluster, you need to run (as a regular user):
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
http://kubernetes.io/docs/adm...
You can now join any number of machines by running the following on each node
as root:
kubeadm join --token 0696ed.7cd261f787453bd9 192.168.0.100:6443
[root@master ~]#
kubeadm join --token 0696ed.7cd261f787453bd9 192.168.0.100:6443 这个一定要记住,以后无法重现，添加节点需要
添加节点
[root@node1 ~]# kubeadm join --token 0696ed.7cd261f787453bd9 192.168.0.100:6443
[kubeadm] WARNING: kubeadm is in beta, please do not use it for production clusters.
[preflight] Running pre-flight checks
[preflight] WARNING: docker version is greater than the most recently validated version. Docker version: 17.09.0-ce. Max validated version: 1.12
[preflight] WARNING: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
[preflight] Starting the kubelet service
[discovery] Trying to connect to API Server "192.168.0.100:6443"
[discovery] Created cluster-info discovery client, requesting info from "https://192.168.0.100:6443"
[discovery] Cluster info signature and contents are valid, will use API Server "https://192.168.0.100:6443"
[discovery] Successfully established connection with API Server "192.168.0.100:6443"
[bootstrap] Detected server version: v1.7.10
[bootstrap] The server supports the Certificates API (certificates.k8s.io/v1beta1)
[csr] Created API client to obtain unique certificate for this node, generating keys and certificate signing request
[csr] Received signed certificate from the API server, generating KubeConfig...
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/kubelet.conf"
Node join complete:
- Certificate signing request sent to master and response
received. - Kubelet informed of new secure connection details.
Run 'kubectl get nodes' on the master to see this machine join.
在master配置kubectl的kubeconfig文件
[root@master ~]# mkdir -p $HOME/.kube
[root@master ~]# cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@master ~]# chown $(id -u):$(id -g) $HOME/.kube/config
在Master上安装flannel
docker pull quay.io/coreos/flannel:v0.8.0-amd64
kubectl apply -f https://raw.githubusercontent...
kubectl apply -f https://raw.githubusercontent...
查看集群
[root@master ~]# kubectl get cs
NAME STATUS MESSAGE ERROR
scheduler Healthy ok
controller-manager Healthy ok
etcd-0 Healthy {"health": "true"}
[root@master ~]# kubectl get nodes
NAME STATUS AGE VERSION
master Ready 24m v1.7.5
node1 NotReady 45s v1.7.5
node2 NotReady 7s v1.7.5
[root@master ~]# kubectl get pods --all-namespaces
NAMESPACE NAME READY STATUS RESTARTS AGE
kube-system etcd-master 1/1 Running 0 24m
kube-system kube-apiserver-master 1/1 Running 0 24m
kube-system kube-controller-manager-master 1/1 Running 0 24m
kube-system kube-dns-2425271678-h48rw 0/3 ImagePullBackOff 0 25m
kube-system kube-flannel-ds-28n3w 1/2 CrashLoopBackOff 13 24m
kube-system kube-flannel-ds-ndspr 0/2 ContainerCreating 0 41s
kube-system kube-flannel-ds-zvx9j 0/2 ContainerCreating 0 1m
kube-system kube-proxy-qxxzr 0/1 ImagePullBackOff 0 41s
kube-system kube-proxy-shkmx 0/1 ImagePullBackOff 0 25m
kube-system kube-proxy-vtk52 0/1 ContainerCreating 0 1m
kube-system kube-scheduler-master 1/1 Running 0 24m
[root@master ~]#
如果出现：The connection to the server localhost:8080 was refused - did you specify the right host or port?
解决办法： 为了使用kubectl访问apiserver，在~/.bash_profile中追加下面的环境变量：export KUBECONFIG=/etc/kubernetes/admin.conf source ~/.bash_profile 重新初始化kubectl
作者：ChamPly
来源：https://my.oschina.net/ChamPl...