OpenWRT中添加对小度路由的支持

这里还是向OpenWRT中添加对小度路由的支持

向 target/linux/ramips/image/makefile中写入新设备

image/build/profile/mt7620a_CLZ=$(call buildFirmware/Default8M/$(1),$(1),mt7620a_clz,MT7620a_CLZ)

$(call image/Build/Profile/MT7620a_CLZ,$(1))

base-files中的一些可用配置：

base-files/etc/diag.sh 控制LED在OpenWRT启动时是否闪烁

base-files/lib/upgrade/platform.sh 允许sysupgrade工作

base-files/etc/uci-defaults/network to configure(安装) default network interface(界面) settings, particularly MAC addresses

base-files/etc/uci-defaults/leds if you have configurable(可配置的) LEDs which should default to a behavior(行为), like a WLAN activity LED

base-files/etc/hotplug.d/firmware(固件)/10-rt2x00-eeprom to extract(提取) the firmware image for the wireless(无线的) module

base-files/lib/preinit/06_set_iface_mac to set the MAC addresses of any other interfaces(界面)

编写的小度路由用的dts文件

......本站只呈现部分内容，查看完整文章请到WiFiDog官网社区http://www.wifidog.pro/2015/06/22/openwrt%E6%B7%BB%E5%8A%A0%E6%96%B0%E8%AE%BE%E5%A4%87.html ，转载请注明出处