POJ 3525 Most Distant Point from the Sea （半平面交+二分）

Most Distant Point from the Sea Time Limit: 5000MS   Memory Limit: 65536K Total Submissions: 3476   Accepted: 1596   Special Judge Description The main land of Japan called Honshu is an island surrounded by the sea. In such an island, it is natural to ask a question: “Where is the most distant point from the sea?” The answer to this question for Honshu was found in 1996. The most distant point is located in former Usuda Town, Nagano Prefecture, whose distance from the sea is 114.86 km. In this problem, you are asked to write a program which, given a map of an island, finds the most distant point from the sea in the island, and reports its distance from the sea. In order to simplify the problem, we only consider maps representable by convex polygons. Input The input consists of multiple datasets. Each dataset represents a map of an island, which is a convex polygon. The format of a dataset is as follows. n     x1   y1   ⋮   xn   yn Every input item in a dataset is a non-negative integer. Two input items in a line are separated by a space. n in the first line is the number of vertices of the polygon, satisfying 3 ≤ n ≤ 100. Subsequent n lines are the x- and y-coordinates of the n vertices. Line segments (xi, yi)–(xi+1, yi+1) (1 ≤ i ≤ n − 1) and the line segment (xn, yn)–(x1, y1) form the border of the polygon in counterclockwise order. That is, these line segments see the inside of the polygon in the left of their directions. All coordinate values are between 0 and 10000, inclusive. You can assume that the polygon is simple, that is, its border never crosses or touches itself. As stated above, the given polygon is always a convex one. The last dataset is followed by a line containing a single zero. Output For each dataset in the input, one line containing the distance of the most distant point from the sea should be output. An output line should not contain extra characters such as spaces. The answer should not have an error greater than 0.00001 (10−5). You may output any number of digits after the decimal point, provided that the above accuracy condition is satisfied. Sample Input 4 0 0 10000 0 10000 10000 0 10000 3 0 0 10000 0 7000 1000 6 0 40 100 20 250 40 250 70 100 90 0 70 3 0 0 10000 10000 5000 5001 0 Sample Output 5000.000000 494.233641 34.542948 0.353553 Source Japan 2007

 

 

模板题，没啥说的

 

求在多边形内，到边的距离最大的点

 

枚举半径，用半平面交判断

 

 

/* ***********************************************
Author        :kuangbin
Created Time  :2013/8/18 15:11:26
File Name     :F:\2013ACM练习\专题学习\计算几何\半平面交\POJ3525.cpp
************************************************ */

#include <stdio.h>
#include <string.h>
#include <iostream>
#include <algorithm>
#include <vector>
#include <queue>
#include <set>
#include <map>
#include <string>
#include <math.h>
#include <stdlib.h>
#include <time.h>
using namespace std;
const double eps = 1e-8;
const double PI = acos(-1.0);
int sgn(double x)
{
    if(fabs(x) < eps) return 0;
    if(x < 0) return -1;
    else return 1;
}
struct Point
{
    double x,y;
    Point(){}
    Point(double _x,double _y)
    {
        x = _x; y = _y;
    }
    Point operator -(const Point &b)const
    {
        return Point(x - b.x, y - b.y);
    }
    double operator ^(const Point &b)const
    {
        return x*b.y - y*b.x;
    }
    double operator *(const Point &b)const
    {
        return x*b.x + y*b.y;
    }
};
struct Line
{
    Point s,e;
    double k;
    Line(){}
    Line(Point _s,Point _e)
    {
        s = _s; e = _e;
        k = atan2(e.y - s.y,e.x - s.x);
    }
    Point operator &(const Line &b)const
    {
        Point res = s;
        double t = ((s - b.s)^(b.s - b.e))/((s - e)^(b.s - b.e));
        res.x += (e.x - s.x)*t;
        res.y += (e.y - s.y)*t;
        return res;
    }
};
//半平面交，直线的左边代表有效区域
bool HPIcmp(Line a,Line b)
{
    if(fabs(a.k - b.k) > eps)return a.k < b.k;
    return ((a.s - b.s)^(b.e - b.s)) < 0;
}
Line Q[110];
void HPI(Line line[], int n, Point res[], int &resn)
{
    int tot = n;
    sort(line,line+n,HPIcmp);
    tot = 1;
    for(int i = 1;i < n;i++)
        if(fabs(line[i].k - line[i-1].k) > eps)
            line[tot++] = line[i];
    int head = 0, tail = 1;
    Q[0] = line[0];
    Q[1] = line[1];
    resn = 0;
    for(int i = 2; i < tot; i++)
    {
        if(fabs((Q[tail].e-Q[tail].s)^(Q[tail-1].e-Q[tail-1].s)) < eps || fabs((Q[head].e-Q[head].s)^(Q[head+1].e-Q[head+1].s)) < eps)
            return;
        while(head < tail && (((Q[tail]&Q[tail-1]) - line[i].s)^(line[i].e-line[i].s)) > eps)
            tail--;
        while(head < tail && (((Q[head]&Q[head+1]) - line[i].s)^(line[i].e-line[i].s)) > eps)
            head++;
        Q[++tail] = line[i];
    }
    while(head < tail && (((Q[tail]&Q[tail-1]) - Q[head].s)^(Q[head].e-Q[head].s)) > eps)
        tail--;
    while(head < tail && (((Q[head]&Q[head-1]) - Q[tail].s)^(Q[tail].e-Q[tail].e)) > eps)
        head++;
    if(tail <= head + 1)return;
    for(int i = head; i < tail; i++)
        res[resn++] = Q[i]&Q[i+1];
    if(head < tail - 1)
        res[resn++] = Q[head]&Q[tail];
}
Point p[110];
Line line[110];
//*两点间距离
double dist(Point a,Point b)
{
    return sqrt((a-b)*(a-b));
}
void change(Point a,Point b,Point &c,Point &d,double p)//将线段ab往左移动距离p
{
    double len = dist(a,b);
    double dx = (a.y - b.y)*p/len;
    double dy = (b.x - a.x)*p/len;
    c.x = a.x + dx; c.y = a.y + dy;
    d.x = b.x + dx; d.y = b.y + dy;
}
Point pp[110];
int main()
{
    //freopen("in.txt","r",stdin);
    //freopen("out.txt","w",stdout);
    int n;
    while(scanf("%d",&n) == 1 && n)
    {
        for(int i = 0;i < n;i++)
            scanf("%lf%lf",&p[i].x,&p[i].y);
        double l = 0, r = 100000;
        double ans = 0;
        while(r - l >= eps)
        {
            double mid = (l+r)/2;
            for(int i = 0;i < n;i++)
            {
                Point t1,t2;
                change(p[i],p[(i+1)%n],t1,t2,mid);
                line[i] = Line(t1,t2);
            }
            int resn;
            HPI(line,n,pp,resn);
            if(resn == 0)
                r = mid - eps;
            else
            {
                ans = mid;
                l = mid + eps;
            }
        }
        printf("%.6f\n",ans);
    }
    return 0;
}