在/etc/filesystems的文件里面可以看到支持的文件系统
centos 7默认的是xfs的文件系统
在刚开始装系统格式化的时候就是xfs的格式
centos 6之前的默认的是ext的文件系统
命令：
mke2fs -t ext4 /dev/sdb3 === mkfs.ext4 /dev/sdb3 这种格式不支持xfs的格式
mkfs.xfs /dev/sdb3
不分区直接格式化也是可以的
[root@kylin ~]# cat /etc/filesystems
xfs
ext4
ext3
ext2
nodev proc
nodev devpts
iso9660
vfat
hfs
hfsplus
用mount可以看到sda的文件系统
[root@kylin ~]# mount
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime,seclabel)
.
.
.
(rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
configfs on /sys/kernel/config type configfs (rw,relatime)
/dev/sda3 on / type xfs (rw,relatime,seclabel,attr2,inode64,noquota)
selinuxfs on /sys/fs/selinux type selinuxfs (rw,relatime)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=26,pgrp=1,timeout=300,minproto=5,maxproto=5,direct)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,seclabel)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime,seclabel)
/dev/sda1 on /boot type xfs (rw,relatime,seclabel,attr2,inode64,noquota)
tmpfs on /run/user/0 type tmpfs (rw,nosuid,nodev,relatime,seclabel,size=99996k,mode=700)
虽然说默认的是xfs的格式，但是也是可以格式化成ext的文件格式
格式化的命令
mke2fs -t xfs -b 2048
-t：是指定文件格式
-b：是指定块的大小
块的默认大小是4K，如果一个文件不足4K 也是会占用一个块（4K）
这个命令是不支持xfs的文件系统的
[root@kylin ~]# mke2fs -t xfs -b 2048 /dev/sdb3
mke2fs 1.42.9 (28-Dec-2013)
Your mke2fs.conf file does not define the xfs filesystem type.
Aborting...
mkfs.ext4 ===mke2fs -t ext4
这两条命令是一样的
[root@kylin ~]# mke2fs -t ext4 /dev/sdb3
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
65536 inodes, 262144 blocks
13107 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=268435456
8 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376
Allocating group tables: done
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
[root@kylin ~]# mkfs.ext4 /dev/sdb3
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
65536 inodes, 262144 blocks
13107 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=268435456
8 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376
Allocating group tables: done
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
格式化成xfs格式的时候报错，需要加一个-f选项
[root@kylin ~]# mkfs.xfs /dev/sdb3
mkfs.xfs: /dev/sdb3 appears to contain an existing filesystem (ext4).
mkfs.xfs: Use the -f option to force overwrite.
[root@kylin ~]# mkfs.xfs -f /dev/sdb3
meta-data=/dev/sdb3 isize=512 agcount=4, agsize=65536 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=0, sparse=0
data = bsize=4096 blocks=262144, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
[root@kylin ~]#
刚格式化玩用mount是看不到文件系统的，需用挂载才能看到，如果不挂载也是可以看到的
blkid /dev/sdb3 这个命令也是可以看到刚才的文件系统的
[root@kylin ~]# blkid /dev/sdb3
/dev/sdb3: UUID="fca5f753-b2f1-4957-a51f-1c851be3a25f" TYPE="xfs"
可以改块的大小，这边提示有点大，如果是需要放视频音乐的这种大文件的，可以改成比较大的分区
[root@kylin ~]# mke2fs -b 8192 /dev/sdb3
Warning: blocksize 8192 not usable on most systems.
mke2fs 1.42.9 (28-Dec-2013)
mke2fs: 8192-byte blocks too big for system (max 4096)
Proceed anyway? (y,n) n
一般都是一些小的文件，可以改成2048，一般保持默认就可以了
[root@kylin ~]# mke2fs -b 2048 /dev/sdb3
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=2048 (log=1)
Fragment size=2048 (log=1)
Stride=0 blocks, Stripe width=0 blocks
65536 inodes, 524288 blocks
26214 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=536870912
32 block groups
16384 blocks per group, 16384 fragments per group
2048 inodes per group
Superblock backups stored on blocks:
16384, 49152, 81920, 114688, 147456, 409600, 442368
Allocating group tables: done
Writing inode tables: done
Writing superblocks and filesystem accounting information: done
在上面有一个5%的空间是预留的，预留个root用户的比较浪费空间，改小一点，磁盘最大化使用
可以使用-m参数改成0.1
[root@kylin ~]# mke2fs -m 0.1 /dev/sdb3
默认的文件类型是ext2，太老了，可以指定一下
[root@kylin ~]# blkid /dev/sdb3
/dev/sdb3: UUID="e51a1468-12b6-40f1-a2dc-11fca44e4208" TYPE="ext2"
mkfs.xfs 是不支持这些参数的
[root@kylin ~]# mkfs.xfs -m 0.1 /dev/sdb3
[root@kylin ~]# mkfs.ext4 -m 0.1 /dev/sdb3
这两个命令的参数是一样的，都是可以用的
[root@kylin ~]# mke2fs -t ext4 -b 8192 /dev/sdb3
-i的参数是改变inode的大小
[root@kylin ~]# mke2fs -i 8192 -t ext4 /dev/sdb3
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
131072 inodes, 262144 blocks
13107 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=268435456
8 block groups
32768 blocks per group, 32768 fragments per group
16384 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376
Allocating group tables: done
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done