在CentOS7.4上配置NTP客户端

1.检查是否连通NTP服务器
[root@TE21 ~]# ntpdate 192.168.1.100
13 Dec 15:10:12 ntpdate[9146]: step time server 192.168.1.100 offset -2289.098141 sec
[root@TE21 ~]# date
Fri Dec 13 15:10:19 CST 2019

2.设置NTP客户端
[root@TE21 ~]# vi /etc/ntp.conf

server 192.168.1.100 iburst

3.配置NTP自动启动
[root@TE21 ~]# systemctl enable ntpd.service
Created symlink from /etc/systemd/system/multi-user.target.wants/ntpd.service to

/usr/lib/systemd/system/ntpd.service.
[root@TE21 ~]# systemctl start ntpd.service

4.检查NTP运行情况

[root@TE21 ~]# ntpstat
synchronised to NTP server (192.168.1.100) at stratum 4
time correct to within 996 ms
polling server every 64 s
[root@TE21 ~]#

[root@TE21 ~]# watch ntpq -p
Every 2.0s: ntpq -p Fri

Dec 13 15:15:25 2019

 remote           refid      st t when poll reach   delay   offset  jitter

==============================================================================
*192.168.1.100 120.25.115.20 3 u 57 64 3 0.173 2.650 0.234

[root@TE21 ~]# ntpdate 192.168.1.100
13 Dec 15:17:27 ntpdate[9312]: the NTP socket is in use, exiting
[root@TE21 ~]#

完成。