转载于 宁广涵的博客
My intern at TCL is over soon. Before going back to the campus for graduation, I have decided to build myself a personal deep learning rig. I guess I cannot really rely on the machines either in the company or in the lab, because ultimately the workstation is not mine, and the development environment may be messed up (It already happened once) . With a personal rig, I can conveniently use teamviewer to login my deep learning workstation at any time. And I got the chance to build everything from scratch.
In this post, I will go through the whole process of the building a deep learning PC, including the hardware and the software. Upon sharing it with you, I hope it will be helpful to researchers and engineers with the same needs. Since I am building the rig withGTX 1080, Ubuntu 16.04, CUDA 8.0RC, CuDnn 7, everything is pretty up-to-date. Here is an overview of this article:
Hardware
1. Pick Parts
2. Build the workstation
Software
3. Operating System Installation
Preparing bootable installation USB drives
Build systems
4. Deep Learning Environment Installation
Remote Control
teamviewer
Bundle Management
anaconda
Development Environment
python IDE
GPU-optimized Environment
CUDA
CuDnn
Deep Learning Frameworks
Tensorflow
Mxnet
Caffe
Darknet
5. Docker for Out-of-the-Box Deep Learning Environment
Install Docker
Install NVIDIA-Docker
Download Deep Learning Docker Images
Share Data between Host and Container
Learn Simple Docker Commands
Hardware:
1. Pick Parts
I recommend usingPcPartPickerto pick your parts. It helps you find the source where you can buy your part with the lowest price available, and it checks the compatibility of the selected parts for you. They also have ayoutube channelwhere they offer videos that demonstrate the building process.
In my case, I used their build article as reference, and created a build list myself, which can be found [here]. Here are the parts that I used to build the workstation.
Since we are doing deep learning research, a good GPU is necessary. Therefore, I choose the recently released GTX 1080. It was quite hard to buy, but if you notice the bundles in newegg, some people are gathering this to sell in [GPU + motherboard] or [GPU + Power] bundles. Market, you know. It is better buying the bundle than buying it at a raised price, though. Anyway, a good GPU will make the training or finetuning process much faster. Here are some figures to show the advantage of GTX 1080 over some other GPUs, with respect to performance, price, and power efficiency (saves you electricity daily and the money to buy the appropriate PC power supply).
Note that GTX 1080 has only 8GB memory, compared to 12GB of TITAN X. You may be richer or more generous to yourself, therefore considering using stacked GPUs. Then remember to choose another motherboard that has more PCIs.
2. Build from Parts
As of building from the parts, I followed the tutorial of [this video]. Although the parts are slightly different, the building process is quite similar. I have no previous experience building by my own, but with this tutorial I was able to make it work within 3 hours. (It should take you less time, but I was extremely cautious, you know.)
Software:
3. Installation of Operating Systems
It is very common to use Ubuntu for deep learning research. But sometimes you may need another operating system working as well. For example, if you are also a VR developer, having a GTX 1080, you may want a Win10 for VR development with Unity or whatsoever. Here I introduce the installation of both Win10 and Ubuntu. If you are only interested in the Ubuntu installation, you can skip installing windows.
3.1 Preparing bootable installation USB drives
It is very convenient to install operating systems with USB disks, as we all have them. Because the USB disks will be formatted, you won’t want that happen to your portable hard disk. Or if you have writable DVDs, you can use them to install operating systems and save them for future use, if you can find them again by then.
Since it is well illustrated in the official website, you can go to [Windows 10 page] to learn how to make the USB drive.As of Ubuntu, you can similarly download the ISO and create USB installation media or burn it to a DVD. If you are now using Ubuntu system, follow [this tutorial] from Ubuntu official website. If you are current using Windows, follow [this tutorial] istead.
3.2 Installing Systems
It is highly recommended that you install windows first for a dual-system installation. I will skip win10 installation as detailed guide can be found here: [Windows 10 page] . One thing to note is that you will need the activation key. You can find the tag on the bottom of your laptop, if it has been installed windows 7 or windows 10 upon purchasing.
Installing Ubuntu16.04 was a little tricky for me, which was kind of a surprise. It was mainly because I did not have the GTX 1080 driver pre-installed at the very beginning. I will share my story with you, in case you encounter the same problems.
Installing Ubuntu：
First things first, insert the boot USB for installation. Nothing is showing on my LG screen, except that it says frequency is too high. But the screen is okay, as is tested on another laptop. I tried to connect the PC with a TV, which was showing, but only the desktop with no tool panel. I figured out it was the problem of the NVIDIA driver. So I went to BIOS and set the integrated graphics as default and restart. Remember to switch the HDMI from the port on GTX1080 to that on the motherboard. Now the display works well. I successfully installed Ubuntu following its prompt guides.
In order to use GTX1080, go to [this page] to get the NVIDIA display driver for Ubuntu. Upon installing this driver, make sure that GTX1080 is on the motherboard.
Now it shows “You appear to be running an X server.. “. I followedthis linkto solve this problem and installed the driver. I quote it here:
Make sure you are logged out.
Hit CTRL+ALT+F1and login using your credentials.
kill your current X server session by typing sudo service lightdm stopor sudo stop lightdm
Enter runlevel 3 by typing sudo init 3and install your *.run file.
You might be required to reboot when the installation finishes. If not, run sudo service lightdm startor sudo start lightdm to start your X server again.
After installing the driver, we can now restart and set the GTX1080 as default in BIOS. We are good to go.
Some other small problems I encountered are listed here, in case they are helpful:
Problem: When I restart, I couldn’t find the option to choose windows.
Solver: In ubuntu,sudo gedit /boot/grub/grub.cfg, add following lines:
menuentry ‘Windows 10′{
set root=’hd0,msdos1′
chainloader +1
}
Problem: Ubuntu does not support wireless adapter Belkin N300, which is commonly sold in Bestbuy.
Solver: Follow instructions inthis link, the problem will be solved.
Problem: Upon installing teamviewer, it says “dependencies not met”
Solver: Refer tothis link.
4. Deep Learning Environment
4.1 Installation of Remote Control (TeamViewer):
dpkg -i teamviewer_11.0.xxxxx_i386.deb
4.2 Installation of Package Management System (Anaconda):
Anaconda is an easy-to-install free package manager, environment manager, Python distribution, and collection of over 720 open source packages offering free community support.It can be used to create virtual environments, where each environment will not mess up with each other. It is helpful when we use different deep learning frameworks at the same time, and the configurations are different.Using it to install packages is convenient as well.It can be easily installed,follow this.
Some commands to start using virtual environment:
source activate [virtualenv]
source deactivate
4.3 Installation of Development Environment (Python IDE):
4.3.1 Spyder vs Pycharm?
Spyder
Advantage：matlab-like，easy to review intermediate results.
Pycharm：
Advantage：modular coding，more complete IDE for web development frameworks and cross-platform.
In my personal philosophy, I regard them to be merely tools. Each tool will be used when it comes in handy. I will use IDEs for the construction of the backbone for the project. For example, use pycharm for the framework construction. After that, I will just modify code with VIM. It is not that VIM is so powerful and showy, but because it is the single text editor that I want to really master. As of text editors, there is no need we should master two. For special occasions, where we need to frequently check IO, directories, etc, we might want to use spyder instead.
4.3.2 Installation:
spyder：
You do not need to install spyder, as is included in anaconda.
pycharm
Download from theofficial website. Just unzip.
Set anaconda to be the project interpreter for pycharm, dealing with package management. Followthis.
vim
sudo apt-get install vim
The configuration that I currently use:Github
Git
sudo apt install git
git config –global user.name “Guanghan Ning”
git config –global user.email “[email protected]”
git config –global core.editor vim
git config –list
4.4 Installation of GPU-Optimized Computing Environment (CUDA and CuDNN)
4.4.1 CUDA
Install CUDA 8.0 RC
There are two reasons to choose the 8.0 version over 7.5:
CUDA 8.0 will give a performance gain for GTX1080 (Pascal), compared to CUDA 7.5.
It seems that ubuntu 16.04 does not support CUDA 7.5 because you cannot find it to download on the official website. Therefore CUDA 8.0 is the only choice.
CUDA starter Guide
CUDA Installer Guide
sudo sh cuda_8.0.27_linux.run
Follow the command-line prompts
As part of the CUDA environment, you should add the following in the ~/.bashrcfile of your home folder.
export CUDA_HOME=/usr/local/cuda-8.0
export LD_LIBRARY_PATH=${CUDA_HOME}/lib64
PATH=${CUDA_HOME}/bin:${PATH}
export PATH
check if CUDA is installed (Remember to restart the terminal):
nvcc –version
4.4.2 Cudnn（CUDA Deep Learning Libarary）
install cudnn
Version：Cudnn v5.0 for CUDA 8.0RC
User Guide
Install Guide
Choice one: (Add CuDNN path to environment variables)
Extract folder “cuda”
cd
export LD_LIBRARY_PATH=`pwd`:$LD_LIBRARY_PATH
Choice two: (Copy the files of CuDNN to CUDA folder. If CUDA is working alright, it will automatically find CUDNN by relative path)
tar xvzf cudnn-8.0.tgz
cd cudnn
sudo cp include/cudnn.h /usr/local/cuda/include
sudo cp lib64/libcudnn* /usr/local/cuda/lib64
sudo chmod a+r /usr/local/cuda/include/cudnn.h /usr/local/cuda/lib64/libcudnn*
4.5 Installation of Deep Learning Frameworks：
4.5.1 Tensorflow / keras
Install tensorflow first
Install with anaconda
conda create -n tensorflow python=3.5
Install Tensorflow using Pip in the environment(It does NOT supports cuda 8.0 at the moment. I will update this when binaries for CUDA 8.0 come out)
source activate tensorflow
sudo apt install python3-pip
export TF_BINARY_URL=https://storage.googleapis.com/tensorflow/linux/gpu/tensorflow-0.9.0-cp35-cp35m-linux_x86_64.whl
pip3 install –upgrade $TF_BINARY_URL
Install Tensorflow directly from source
install bazel
install jdk 8
uninstall jdk 9
sudo apt-get install python-numpyswigpython-dev
./configure
build with bazel
bazel build -c opt –config=cuda //tensorflow/cc:tutorials_example_trainer
bazel-bin/tensorflow/cc/tutorials_example_trainer –use_gpu
Install keras
download it at:https://github.com/fchollet/keras/tree/master/keras
cd to the Keras folder and run the install command:
sudo python setup.py install
Change the default backendfrom theano to tensorflow
Use conda to activate/deactivate the virtual environment
source activate tensorflow
source deactivate
4.5.2 Mxnet
Create a virtual environment for Mxnet
conda create -n mxnet python=2.7
source activate mxnet
Follow theofficial websiteto install mxnet
sudo apt-get update
sudo apt-get install -y build-essential git libatlas-base-dev libopencv-dev
git clone –recursivehttps://github.com/dmlc/mxnet
edit make/config.mk
set cuda= 1, set cudnn= 1, add cuda path
cd mxnet
make clean_all
make -j4
One problem I encountered was，”gcc version later than 5.3 not supported!” My gcc version was 5.4, and I had to remove it.
apt-get remove gcc g++
conda install -c anaconda gcc=4.8.5
gcc –version
Python package installfor mxnet
conda install -c anaconda numpy=1.11.1
Method 1:
cd python; sudo python setup.py install
sudo apt-get install python-setuptools
Method 2:
cd mxnet
cp -r ../mxnet/python/mxnet .
cp ../mxnet/lib/libmxnet.so mxnet/
Quick test：
python example/image-classification/train_mnist.py
GPU test:
python example/image-classification/train_mnist.py –network lenet –gpus 0
4.5.3 Caffe
Follow this detailed guide:Caffe Ubuntu 16.04 or 15.10 Installation Guide
OpenCV is needed. For Installation of Opencv 3.1, refer to this link:Ubuntu 16.04 or 15.10 OpenCV 3.1 Installation Guide
4.5.4 Darknet
This is the easiest of all to install. Just type “make”, and that’s it.
5. Docker for Out-of-the-Box Deep Learning Environment
I used to have caffe, darknet, mxnet, tensorflow all installed correctly in Ubuntu 14.04 and TITAN-X (cuda7.5). And I have done projects with these frameworks, all turning out working well. It is therefore safer to use these pre-built environments than adventuring with latest versions, if you want to focus on the deep learning research instead of being potentially bothered by peripheral problems you may encounter. Then you should consider isolate each framework with its own environment using docker. These docker images can be found inDockerHub.
5.1 Install Docker
Unlike virtual machines, a docker image is built with layers. Same ingredients are shared among different images. When we download a new image, existing components won’t be re-downloaded. It is more efficient and convenient compared to the replacement of the whole virtual machine image. Docker containers are like the run-time of docker images. They can be committed and used to update docker images, just like Git.
To install docker on Ubuntu 16.04, we follow instructions onthe official website.
5.2 InstallNVIDIA-Docker
Docker containers are both hardware-agnostic and platform agnostic, but docker does not natively support NVIDIA GPUs with containers. (The hardware is specialized, and driver is needed.) To solve this problem, we need the nvidia-docker to mount the devices and driver files when starting the container on the target machine. In this way, the image is agnostic of the Nvidia driver.
The installation of NVIDIA-Docker can be foundhere.
5.3 Download Deep Learning Docker Images
I have collected some pre-built docker images from the Docker Hub. They are listed here:
cuda-caffe
cuda-mxnet
cuda-keras-tensorflow-jupyter
More can be easily found on docker hub.
5.4 Share Data between Host and Container
For computer vision researchers, it will be awkward not to see results.For instance, after adding some Picasso style to an image, we would definitely want to the output images from different epoches.Check outthis pagequickly to share data between the host and the container.In a shared directory, we can create projects. On the host, we can start coding with text editors or whatever IDEs we prefer. And then we can run the program in the container.The data in the shared container can be viewed and processed with the GUI of the host Ubuntu machine.
5.5 Learn Simple Docker Commands
Don’t be overwhelmed if you are new to docker. It does not need to be systematically studied unless you want to in the future.Here are some simple commands for you to use to start dealing with docker. Usually they are sufficient if you consider Docker a tool, and want to use it solely for a deep learning environment.
How to check the docker images？
docker images： Check all the docker images that you have.
How to check the docker containers？
docker ps -a：Check all the containers that you have.
docker ps: Check containers that are running
How to exit a docker container？
(Method 1) In the terminal corresponding the current container:
exit
(Method 2) Use [Ctrl + Alt + T] to open a new terminal, or use [Ctrl + Shift + T] to open a new terminal tab：
docker ps -a：Check the containers you have.
docker ps: Check the running container(s).
docker stop [container’s ID]: Stop this container.
How to remove a docker image？
docker rmi [docker_image_name]
How to remove a docker container？
docker rm [docker_container_name]
How to create our own docker image, based on one that is from someone else？（Update a container created from an image and commit the results to an image.）
load image，open a container
do some changes in the container
commit to the image
docker commit -m “Message: Added changes” -a “Author: Guanghan” 0b2616b0e5a8 ning/cuda-mxnet
Copy data between host and the docker container：
docker cp foo.txt mycontainer:/foo.txt
docker cp mycontainer:/foo.txt foo.txt
Open a container from a docker image：
If the container is to be saved because it is probably to be committed:
docker run -it [image_name]
If the container is only for temporary use:
docker run –rm -it [image_name]