思科无线产品速查手册

思科无线产品速查手册

 

无线AP

 

思科无线 AP 系列产品	802.11b	802.11g	802.11a
1000 系列 *	Yes	Yes	Yes
1100 系列	Yes	Yes	No
1130AG 系列	Yes	Yes	Yes
1200 系列	Yes	Yes	通过安装模块可支持
1230AG 系列	Yes	Yes	Yes
1300 系列	Yes	Yes	No

 

 

 

 

 

 

 

 

思科AP

产品	特性	优点
在办公室和相似的环境使用的 AP
思科 1130AG 系列 AP 薄外形 , 集成天线的企业级 AP ，轻松布署在办公室和相似的 RF 环境。	• 两个高可靠性的 IEEE 802.11a 和 802.11g 无线模块提供 108 Mbps 容量 • 2.4 and 5 GHz 集成差异集成天线 , 轻松布署不用外加天线 • 薄塑胶外壳 • 16 MB Flash 内存 • 可在 0  到 40°C 的环境下正常工作。 • 支持 Inline power (POE 和 802.3af) • Console 端口管理 • 支持 WPA 和 802.11i/WPA2 • 通过软件包升级可支持 LWAPP • 思科分布式无线解决方案	• 顺从 IEEE 802.11a /b/g 标准布署在高容量的无线网络 • 迅速安装和轻松管理 其所长、 • Ro4bust and predictable coverage for offices and similar RF environments • 低成 • 通过相互认证和动态加密来达到企业级安全。 • Deployable today as an autonomous access point • Upgradeable in the future to operate as a lightweight access point
思科 Aironet 1100 系列 AP 提供轻松安装，单频带 802.11g AP	• 单 802.11g 无线模块支持最大 54 Mbps 的传输速率 • 2.4 GHz 集成分极集偶极天线。 • 8 MB Flash 内存 • 可在 0 到 40°C 环境下正常工作 • 支持 Inline power ( 思科 POE) • 支持 WPA 和 802.11i/WPA2 • 思科分布式集成解决方案	• Affordable 802.11g connectivity • Easy-to-install, cost-efficient deployment for offices and similar RF environments • Backward-compatible with 802.11b • Enterprise-class security via strong mutual authentication and dynamic encryption • Deployable today as an autonomous access point
思科 Aironet 1000 系列轻量级 AP 802.11a /b/g 轻量级 AP ，集成天线和外部天线连接器 works in conjunction with the Cisco Wireless LAN Controller for system-level performance, security, and scalability.	• 支持全部 LWAPP • 同时空中监控 和数据服务 • 802.11a and 802.11g 无线模块提供 108 Mbps 容量 • 2.4 and 5 GHz 集成分集式天线 • 支持 Inline power (802.3af) • 支持 WPA 和 802.11i/WPA2 • 思科集中式 WLAN 解决方案	• Zero-configuration and management reduces deployment costs and time • Integrated RF management, location and security with no additional equipment simplifies network design reduces hardware costs • IEEE 802.11a /b/g compliance for high-capacity wireless networking • Ready to install for offices and similar RF environments • Enterprise-class security via strong mutual authentication and dynamic encryption
在复杂 RF 环境使用的 AP
思科 Aironet 1230AG 系列 AP 预装 802.11a/g 双频带思科 Aironet 1200 系列， 可布署在复杂的环境， 像工厂和仓库类似的环境。	• 两个高可靠性 IEEE 802.11a and 802.11g 无线模块提供 108 Mbps 容量 • 2.4GHz 和 5GHz 天线连接器，可通过广泛的可选思科天线实现更大信号范围和更灵活的安装选项 • 通过过软件升级支持 LWAPP • 思科分布式解决方案	• IEEE 802.11a /b/g compliance for high-capacity wireless networking • Deployable today as an autonomous access point • Upgradeable in the future to operate as a lightweight access point
思科 Aironet 1200 系列 AP 当只配置 802.11g 无线模块的 AP, the 1200 系列提供合理价位的 , 单频带解决方案可布署在复杂的环境， 像工厂和仓库类似的环境。	• 单 802.11g 无线模块支持最大 54 Mbps 传输速率 • 可以通过硬件升级支持 802.11a • 思科分布式集成解决方案。	• Provides flexibility to deploy an 802.11g network now, with the option to upgrade to a dual-band 802.11a /g network in the future • Deployable today as an autonomous access point
思科 Aironet 1230AG 系列和 1200 系列 AP 两种 AP 是为比较复杂的室内无线应用而设计的 and 提供同样的多功能性 , 高容量 , 和安全特性 ，布署在企业级无线环境。	• 模块化设计允许单频或双频配置 在 2.4 和 5 GH 可达到 54 Mbps 连接速率 • 8 MB Flash 内存 • 金属外壳和延长的操作温度 -20 to 55°C • 多用途托架 , 可以固定在墙上 ; 天花板上和桌面上 . 两个分开的锁装置 • 支持 Inline power  (POE) • 支持 WPA 和 802.11i/WPA2	• Reliable WLAN coverage in challenging deployments that have high multipath or extreme environmental requirements • Enterprise-class security via strong mutual authentication and dynamic encryption
布署在室外的 AP/ 网桥
思科 Aironet 1300 系列室外 AP/ 网桥 理想的室外公共访问区域 , 和校园区域连接 , 或移动网络的基础构架 .	• 可配置成 AP, 无线网桥 , 工作组网桥 • 支持点到 ; 点到多点配置 . • 工业领先的吞吐量和传输速率达到 54 Mbps • Rugged enclosure optimized for harsh outdoor environments with extended operating temperature range • 集成或可选的天线 for flexibility in deployment • Designed specifically for ease of installation and operation • Support for WPA and 802.11i/WPA 2 in access point and workgroup bridge mode and WPA and AES in wireless bridge mode • Cisco Distributed WLAN Solution component when configured as an access point	• Network connections within a campus area • Outdoor infrastructure for mobile networks and users • Public access for outdoor areas • Temporary networks for portable or military operations • Enterprise-class security via strong mutual authentication and dynamic encryption • Deployable today as an autonomous access point

* The Cisco Aironet 1000 Series lightweight access point is used in conjunction with a Cisco Wireless LAN Controller.

 

PRODUCT SPECIFICATIONS

Table 1. Specifications of Cisco Aironet Power Injector

Description	Cisco Aironet Power Injector Media Converter	Cisco Aironet Power Injector for 1100, 1200 Series	350 Series Single Port Power Injector
Part Number	AIR-PWRINJ-FIB	AIR-PWRINJ3	AIR-PWRINJ
LAN Connection	• Max Fiber cable length: 2 km • Type: MT-RJ (multimode fiber) • Label: 100BASE-FX To Network • Speed: 100 Mbps • Duplex: Full	• Max Cat 5 cable length: 100 m from switch to device • Type: RJ-45 • Label: 10/100BASE-TX To Network	• Max Cat 5 cable length: 100 m • Type: RJ-45 • Label: To Network
Device Connection	• Max Cat 5 cable length: 100 m • Type: RJ-45 • Label: 100BASE-TX To Device • Speed: 100 Mbps • Duplex: Full • Auto MDI-X	• Max Cat 5 cable length: 100 m from switch to device • Type: RJ-45 • Label: 10/100BASE-TX To Device	• Max Cat 5 cable length: 100 m • Type: RJ-45 • Label: To AP/Bridge
LEDs	• 2 - Power Status • Uplink Connectivity	• 2 - Power Status • Device Connectivity	• 1 - Power Status and Device Connectivity
Interlockable	Yes	Yes	No
Wired Pairs Used	Injects power into two unused pairs in the Category 5 cable: 4 and 5 (negative) and 7 and 8 (positive)	Injects power into two unused pairs in the Category 5 cable: 4 and 5 (negative) and 7 and 8 (positive)	Injects power into two unused pairs in the Category 5 cable: 4 and 5 (negative) and 7 and 8 (positive)
Electrical	• Input voltage (supplied by external power supply) 48VDC ± 10%, 18 watts • Output voltage: 48 VDC	• Input voltage (supplied by external power supply) 48VDC ± 10%, 18 watts • Output voltage: 48 VDC	• Input voltage (supplied by external power supply) 48VDC ± 10%, 18 watts • Output voltage: 48 VDC
	• Input current: .380A • Output current: .320A	• Input current: .380A • Output current: .320A	• Input current: .200A • Output current: .125A
Power Supply Requirements	Cisco Aironet power supply or alternative DC power supply,* 48 VDC ± 5%, 18 watts	Cisco Aironet power supply, 48 VDC ± 5%, 18 watts	Cisco Aironet power supply, 48 VDC ± 5%, 9 watts
Dimensions	5.49 x 2.14 x 1.36 in . (13.93 x 5.43 x 3.45 cm )	5.49 x 2.14 x 1.36 in . (13.93 x 5.43 x 3.45 cm )	1 x 1.85 x 3.3 in . (2.54 x 4.70 x  8.38 cm )
Weight	4 oz .	4 oz .	3 oz .
Environmental	• 32° to 104° F (0° to 40° C) • 10-90% humidity (noncondensing) • UL 2043 certified for environmental air space installations when using supplied power supply pigtail	• 32° to 113° F (0° to 45° C) • 10-90% humidity (noncondensing)	• 32° to 104° F (0° to 40° C) • 10-90% humidity (noncondensing)

* Note that when using the provided power supply pigtail, connect it to the power source in accordance with local and national codes such as the National Electrical Code NFPA70, the Canadian Electrical Code, Part 1, C22, or IEC 364, Part 1 through 7.