Visio中交叉线去掉拱形

文章分类:综合技术

a.Visio画图时,两根直线交叉时,总是默认会出现一个跨线的标志,那个小弯,不是很爽,一直没有找到去除那个小弯的方法,今天碰到了,仔细的search了一下,恩,原来可以这样设置:

选中线条,然后菜单的格式->行为->连接线->跨线->添加->从不,这样那个小弯消失看上去就舒服多了,不过个人感觉这个应该可以很容易在快捷工具栏中找到,等到什么时候发现了,再来补充一下~

b.增加连接点。在连接线的按钮旁边有下拉按钮,选择那个叉叉符号,就是连接点的命令了,选中需要增加的框图,按住ctrl+左键,就可以增加连接点了。 
 
 
 
 

绘制任意曲线
View>Toolbars>Drawing

Visio画线技巧总结信息
 
Visio技巧总结
1、Visio画图时,两根直线交叉时,总是默认会出现一个跨线的标志,很是不爽,去除方法:选中线条,然后菜单的格式->行为->连接线->跨线->添加->从不,即可。
2、增加连接点。在连接线的按钮旁边有下拉按钮,选择那个叉叉符号,就是连接点的命令了,选中需要增加的框图,按住ctrl+左键,就可以增加连接点了。
3、连接线与对象的吸附。为了方便后期的修改调整,连接线一定要与它连接的对象吸附在一起,否则后期调整时你就等着哭去吧!吸附操作很简单,只需要用鼠标左键拖动连接线至要吸附的对象,看到有个呈辐射状的红点轻轻一闪,就表明连接线与对象成功吸附在一起了,再拖动对象试一下,连接线是不是与对象一起移动了?
4、连接线上文字的添加。很简单!对着线条单击鼠标左键就可以添加文字了!
5、调整画布大小。按住 Ctrl,然后鼠标放在画布边缘,拖动即可。
6、如何让你用visio画得更专业
 
 
打开Visio图片的时候如何去掉内嵌的模具?How do I get rid of all the Stencils that open when I open a Visio Drawing ?
 
How many times have you opened a file in Visio, and along with it, you open numerous Stencil Files splattered all over your
workspace, including “Backgrounds”, “Borders and Shapes”, “Basic Shapes”…etc.
Here’s why, and how to fix it.
Each drawing that someone creates has a basic amount of stencils embedded within the Drawing.  If someone uses your drawing
as a template to make a new drawing, and then they open some stencils and use some shapes from it, then those stencils become
embedded as well.  This scenario can go on and on until it becomes unmanageable.
The key to removing embedded stencils, is saving the file without them !!!
When you open a file next that contains all those p_w_picpaths, here’s what to do !
Perform a “Save As..” as opposed to a “Save”…the following dialog box opens
 << OLE Object: Picture (Metafile) >>
Notice the “Save” button has a drop down arrow  !!!! Click the Arrow !
You will notice that the “Workspace” option is ticked
 << OLE Object: Picture (Metafile) >>
“Untick” the field selection for “Workspace”, and then press the “Save” button in the dialogue box. 
You will probably then be asked to confirm that you want to overwrite the existing file….. Select “Yes”

If you’re using Vsio 2007, refer to the below:
“Just do ‘cascade’ all windows and then click on all stencil and start closing using ‘ctrl + F4’  - it is fairly fast, making
sure you don’t close the drawing window and then once you close all – you save it”