在ubuntu部署zabbix-server

  步骤一： sudo apt-get install zabbix-server-mysql zabbix-frontend-php

      步骤二：使用 dbconfig-common 来为 zabbix-server-mysql 配置数据库，回答是。然后输入数据库管理员(DBA)的密码，再输入zabbix-server-mysql所用数据库的密码，如果留空的话则是一个随机生成的密码，重复输入一次之后就成功安装了 Zabbix


在ubuntu安装zabbix agent建议采用源码安装

步骤一：下载zabbix源码包

       下载链接：http://www.zabbix.com/download.php

步骤二：解压

步骤三：./configure  --enable-agent

       make install

步骤四：编辑配置文件 zabbix_agentd.conf

       cd /usr/local/etc/zabbix_agentd.conf

       Server=127.0.0.1


步骤五：启动服务 zabbix_agentd



另有直接通过apt-get install zabbix-agent 安装，没有成功启动







Installation from sources

Overview

You can get the very latest version of Zabbix by compiling it from the sources.

A step-by-step tutorial for installing Zabbix from the sources is provided here.

1 Installing Zabbix daemons

1 Download the source archive

Go to the Zabbix download page and download the source archive. Once downloaded, extract the sources, by running:

$ tar -zxvf zabbix-2.0.0.tar.gz


Enter the correct Zabbix version in the command. It must match the name of the downloaded archive.
2 Create user account

For all of the Zabbix daemon processes, an unprivileged user is required. If a Zabbix daemon is started from an unprivileged user account, it will run as that user.

However, if a daemon is started from a 'root' account, it will switch to a 'zabbix' user account, which must be present. To create such a user account (in its own group, “zabbix”) on Linux systems, run:

groupadd zabbix
useradd -g zabbix zabbix

A separate user account is not required for Zabbix frontend installation.

If Zabbix server and agent are run on the same machine it is recommended to use a different user for running the server than for running the agent. Otherwise, if both are run as the same user, the agent can access the server configuration file and any Admin level user in Zabbix can quite easily retrieve, for example, the database password.


Running Zabbix as root, bin, or any other account with special rights is a security risk.
3 Create Zabbix database

For Zabbix server and proxy daemons, as well as Zabbix frontend, a database is required. It is not needed to run Zabbix agent.

SQLscripts are provided for creating database schema and inserting the dataset. Zabbix proxy database needs only the schema while Zabbix server database requires also the dataset on top of the schema.

Having created a Zabbix database, proceed to the following steps of compiling Zabbix.

4 Configure the sources

When configuring the sources for a Zabbix server or proxy, you must specify the database type to be used. Only one database type can be compiled with a server or proxy process at a time.

To see all of the supported configuration options, inside the extracted Zabbix source directory run:

./configure --help

To configure the sources for a Zabbix server and agent, you may run something like:

./configure --enable-server --enable-agent --with-mysql --enable-ipv6 --with-net-snmp --with-libcurl

To configure the sources for a Zabbix server (with PostgreSQL etc.), you may run:

./configure --enable-server --with-postgresql --with-net-snmp

To configure the sources for a Zabbix proxy (with SQLite etc.), you may run:

./configure --prefix=/usr --enable-proxy --with-net-snmp --with-sqlite3 --with-ssh2

To configure the sources for a Zabbix agent, you may run:

./configure --enable-agent

Use can add --enable-static flag to statically link libraries. If you plan to distribute compiled binaries among different servers, you must use this flag to make these binaries work without required libraries. Note that --enable-static does not work under Solaris.


Using --enable-static option is not recommended when building server.

In order to build the server statically you must have a static version of every external library needed. There is no strict check for that in configure script.


Command-line utilities zabbix_get and zabbix_sender are compiled if --enable-agent option is used.


Use --with-ibm-db2 flag to specify location of the CLI API.
Use --with-oracle flag to specify location of the OCI API.


--with-ucd-snmp flag can be used instead of --with-net-snmp. If no SNMP support is required, both --with-net-snmp and --with-ucd-snmp may be skipped.
5 Make and install everything


If installing from SVN, it is required to run first:

$ make dbschema

make install

This step should be run as a user with sufficient permissions (commonly 'root', or by using sudo).

Running make install will by default install the daemon binaries (zabbix_server, zabbix_agentd, zabbix_proxy) in /usr/local/sbin and the client binaries (zabbix_get, zabbix_sender) in /usr/local/bin.


To specify a different location than /usr/local, use a --prefix key in the previous step of configuring sources, for example --prefix=/home/zabbix. In this case daemon binaries will be installed under /sbin, while utilities under /bin. Man pages will be installed under /share.
6 Review and edit configuration files
  • edit the Zabbix agent configuration file /usr/local/etc/zabbix_agentd.conf

You need to configure this file for every host with zabbix_agentd installed.

You must specify the Zabbix server IP address in the file. Connections from other hosts will be denied.

  • edit the Zabbix server configuration file /usr/local/etc/zabbix_server.conf

You must specify the database name, user and password (if using any).


With SQLite the full path to database file must be specified; DB user and password are not required.

The rest of the parameters will suit you with their defaults if you have a small installation (up to ten monitored hosts). You should change the default parameters if you want to maximize the performance of Zabbix server (or proxy) though. See the [Performance tuning] section for more details.

  • if you have installed a Zabbix proxy, edit the proxy configuration file /usr/local/etc/zabbix_proxy.conf

You must specify the server IP address and proxy hostname (must be known to the server), as well as the database name, user and password (if using any).


With SQLite the full path to database file must be specified; DB user and password are not required.
7 Start up the daemons

Run zabbix_server on the server side. 

shell> zabbix_server


Make sure that your system allows allocation of 36MB (or a bit more) of shared memory, otherwise the server may not start and you will see “Cannot allocate shared memory for .” in the server log file. This may happen on FreeBSD, Solaris 8.
See the "See also" section at the bottom of this page to find out how to configure shared memory.

Run zabbix_agentd on all the monitored machines. 

shell> zabbix_agentd


Make sure that your system allows allocation of 2MB of shared memory, otherwise the agent may not start and you will see “Cannot allocate shared memory for collector.” in the agent log file. This may happen on Solaris 8.

If you have installed Zabbix proxy, run zabbix_proxy. 

shell> zabbix_proxy

2 Installing Zabbix web interface

Copying PHP files

Zabbix frontend is written in PHP, so to run it a PHP supported webserver is needed. Installation is done by simply copying the PHP files from frontends/php to the webserver HTML documents directory.

Common locations of HTML documents directories for Apache web servers include:

  • /usr/local/apache2/htdocs (default directory when installing Apache from source)
  • /srv/www/htdocs (OpenSUSE, SLES)
  • /var/www/html (Fedora, RHEL, CentOS)
  • /var/www (Debian, Ubuntu)

It is suggested to use a subdirectory instead of the HTML root. To create a subdirectory and copy Zabbix frontend files into it, execute the following commands, replacing the actual directory:

mkdir /zabbix
cd frontends/php
cp -a . /zabbix

If installing from SVN and planning to use any other language than English, you must generate translation files. To do so, run:

locale/make_mo.sh

msgfmt utility from gettext package is required.


Additionally, to use any other language than English, its locale should be installed on the web server. See the "See also" section in the “User profile” page to find out how to install it if required.
Installing frontend
Step 1

In your browser, open Zabbix URL: http:///zabbix

You should see the first screen of the frontend installation wizard.

Step 2

Make sure that all software prerequisites are met.

Pre-requisite Minimum value Description
PHP version 5.1.6  
PHP memory_limit option 128MB   In php.ini:
memory_limit = 128M  
PHP post_max_size option 16MB   In php.ini:
post_max_size = 16M  
PHP upload_max_filesize option 2MB   In php.ini:
upload_max_filesize = 2M  
PHP max_execution_time option 300 seconds   In php.ini:
max_execution_time = 300  
PHP max_input_time option 300 seconds   In php.ini:
max_input_time = 300  
PHP session.auto_start option must be disabled   In php.ini:
session.auto_start = 0.
Required since Zabbix 2.0.4 version.  
Database support One of: IBM DB2, MySQL, Oracle, PostgreSQL, SQLite   One of the following modules must be installed:
ibm_db2, mysql, oci8, pgsql, sqlite3  
bcmath
php-bcmath  
mbstring
php-mbstring  
sockets
php-net-socket. Required for user script support.  
gd 2.0 or higher   php-gd. PHP GD extension must support PNG p_w_picpaths (--with-png-dir), JPEG (--with-jpeg-dir) p_w_picpaths and FreeType 2 (--with-freetype-dir).
libxml 2.6.15   php-xml or php5-dom  
xmlwriter
php-xmlwriter  
xmlreader
php-xmlreader  
ctype
php-ctype  
session
php-session  
gettext
php-gettext  
Step 3

Enter details for connecting to the database. Zabbix database must already be created.

Step 4

Enter Zabbix server details.

Step 5

Review a summary of settings.

Step 6

Download the configuration file and place it under conf/.

Step 7

Finish the installation.

Step 8

Zabbix frontend is ready! The default user name is Admin, password zabbix.

Proceed to getting started with Zabbix.