安装应用软件：The Ports collection
本文件操作于：FreeBSD 4.4-RELEASE
--------------------------------------------------------------------------------
Ports安装设定：
用Ports的方式安装基本的应用软件。而FreeBSD原则上会到各应用软件的总站台下载原始程序后才编译、安装，如此速度上会显得很慢。因此，我们必须设定FreeBSD只需到交大资工系(或者是台湾地区其它的mirror站)来抓取原始程序代码即可。
cp /etc/defaults/make.conf /etc/
vi /etc/make.conf
将： # Port master sites.
#
# If you want your port fetches to go somewhere else than the default
# (specified below) in case the distfile/patchfile was not found,
# uncomment this and change it to a location nearest you. (Don't
# remove the "/${DIST_SUBDIR}/" part.)
#
#MASTER_SITE_BACKUP?= \
# ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/
#
# If you want your port fetches to check the above site first (before
# the MASTER_SITES specified in the port Makefiles), uncomment the
# line below. You can also change the right side to point to wherever
# you want.
#
#MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP}
#
改为： # Port master sites.
#
# If you want your port fetches to go somewhere else than the default
# (specified below) in case the distfile/patchfile was not found,
# uncomment this and change it to a location nearest you. (Don't
# remove the "/${DIST_SUBDIR}/" part.)
#
MASTER_SITE_BACKUP?= \
ftp://ftp.tw.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/\
ftp://ftp5.tw.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/\
ftp://ftp10.tw.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/\
ftp://ftp2.tw.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/\
ftp://ftp3.tw.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/\
ftp://ftp4.tw.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/\
ftp://ftp7.tw.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/\
ftp://ftp8.tw.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/\
ftp://ftp9.tw.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/\
ftp://ftp11.tw.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/\
ftp://ftp12.tw.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/\
ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/
#
# If you want your port fetches to check the above site first (before
# the MASTER_SITES specified in the port Makefiles), uncomment the
# line below. You can also change the right side to point to wherever
# you want.
#
MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP}
#
上述站台的排列原则是，哪一台的网络联机与您的网络环境最佳者，排在第一个。
抓档案时，如果第一台抓不到，会依序向第二台询问有没有。如果都问完了，还是没有，就会到国外的原始站台去抓。不过，这种情形应该很少见到。
--------------------------------------------------------------------------------
开始用Ports安装应用软件：
cd /usr/ports/net/cvsup-without-gui; make install clean
cd /usr/ports/sysutils/portupgrade ; make install clean
cd /usr/ports/ftp/wget ; make install clean
cd /usr/ports/security/sudo ; make install clean
cd /usr/ports/shells/bash2 ; make install clean
cd /usr/ports/ftp/ncftp3 ; make install clean
cd /usr/ports/mail/imap-uw ; make install clean
cd /usr/ports/mail/qpopper ; make install clean
cd /usr/ports/security/pidentd ; make install clean
cd /usr/ports/misc/gnuls ; make install clean
其中，cvsup-without-gui 与 portupgrade 是属于系统更新( src 及 ports-tree )的工具软件，建议您一定要装。
--------------------------------------------------------------------------------
查看安装之后的结果：
pkg_info
autoconf-2.13_1 Automatically configure source code on many Un*x platforms
bash-2.05 The GNU Bourne Again Shell
gettext-0.10.35 GNU gettext package
gettext-0.10.38 GNU gettext package
gmake-3.79.1 GNU version of 'make' utility
isc-dhcp3-3.0.r11 ISC Dynamic Host Configuration Protocol client and server code
libiconv-1.7_1 A character set conversion library
libtool-1.3.4_2 Generic shared library support script
m4-1.4 GNU's m4
ncftp3-3.0.3 ftp replacement with advanced user interface
pidentd-2.8.5 An RFC1413 identification server
qpopper-4.0.3_1 Berkeley POP 3 server (now maintained by Qualcomm)
wget-1.7_3 Retrieve files from the 'net via HTTP and FTP
--------------------------------------------------------------------------------
大海捞针：搜寻某一ports
cd /usr/ports
make search key="popper" | more
cd /usr/ports
make search key="libiconv" | grep Path: | grep libiconv
Port: qpopper-2.53_2
Path: /usr/ports/mail/popper
Info: Berkeley POP 3 server (now maintained by Qualcomm)
Maint:
[email protected]
Index: mail
B-deps:
R-deps:
Port: qpopper-4.0.3_1
Path: /usr/ports/mail/qpopper
Info: Berkeley POP 3 server (now maintained by Qualcomm)
Maint:
[email protected]
Index: mail ipv6
B-deps: autoconf-2.13_1 m4-1.4
R-deps:
Port:软件名称，Path:路径，Info:讯息，Maint:维护者，Index:类型。
cd /usr/ports
make search key="libiconv" | grep Path: | grep libiconv
--------------------------------------------------------------------------------
ports-tree的更新
cd /usr/ports
fetch ftp://freebsd.csie.nctu.edu.tw/pub/CVSup/cvsupfile-ports
cvsup -g -L 2 cvsupfile-ports
我以HiNet-ADSL在FreeBSD 4.2-RELEASE上至NCTU更新ports，共花费了01:07:00。
而在苗栗县网中，以FreeBSD 4.6-RELEASE至NCTU更新ports，只花费了00:05:00。
这个更新的内容默认值是全部的ports，所需耗费的时间相对就很长。您可以只选择其中的一部份来更新即可，只要改cvsupfile-ports档案最底下的那一行(ports-all)。 ports-base: /usr/ports/... misc files at the top of /usr/ports
ports-archivers: /usr/ports/archivers archiving tools
ports-audio: /usr/ports/audio sound support
ports-benchmarks: /usr/ports/benchmarks benchmarks
ports-cad: /usr/ports/cad CAD tools
ports-comms: /usr/ports/comms communication software
ports-databases: /usr/ports/databases databases
ports-devel: /usr/ports/devel development utilities
ports-editors: /usr/ports/editors editors
ports-emulators: /usr/ports/emulators emulators for other OSes
ports-games: /usr/ports/games games
ports-graphics: /usr/ports/graphics various graphics utilities
ports-japanese: /usr/ports/japanese Japanese software.
ports-lang: /usr/ports/lang programming languages
ports-mail: /usr/ports/mail mail software
ports-math: /usr/ports/math numerical computation software
ports-misc: /usr/ports/misc miscellaneous utilities
ports-net: /usr/ports/net networking software
ports-news: /usr/ports/news USENET news software
ports-plan9: /usr/ports/plan9 various programs from Plan9
ports-print: /usr/ports/print printing software
ports-russian: /usr/ports/russian Russian software
ports-security: /usr/ports/security ``security'' utilities, for better or for worse
ports-shells: /usr/ports/shells various UN*X shells
ports-sysutils: /usr/ports/sysutils system utilities
ports-www: /usr/ports/www software related to the world wide web
ports-x11: /usr/ports/x11 X11 software
--------------------------------------------------------------------------------
用 ports 安装的软件，遇有该软件版本更新时如何处置？
请先做「ports-tree的更新」的动作，之后再分别执行下列三道指令：
portsdb -Uu
pkgdb -F
portupgrade -acCv
备注：执行 portsdb -Uu 时，会有令人觉得当机的味道。别耽心，耐心的稍等一下下就好。
--------------------------------------------------------------------------------
portupgrade时，改变预设的编译安装选项
编辑 /usr/local/etc/pkgtools.conf
MAKE_ARGS = {
'databases/mysql323-*' =>; 'WITH_CHARSET=big5',
'databases/mysql323-*' =>; 'SKIP_INSTALL_DB=yes',
'databases/phpmyadmin' =>; 'MYADMDIR?=www/data/phpMyAdmin',
'www/apache13' =>; 'WITH_APACHE_SUEXEC=yes',
}
mysql 安装时，预设不支持中文；而phpMyAdmin预设的安装路径则在www/data.default/phpMyAdmin，与apache不同，害我装了之后找好久才找到。
--------------------------------------------------------------------------------
版本冲突时
pkgdb -F
Duplicated origin: sysutils/portupgrade - portupgrade-20020706 portupgrade-20020805
Unregister any of them? [no] yes
Unregister portupgrade-20020706 keeping the installed files intact? [no] no
--------------------------------------------------------------------------------
portupgrade 强制更新 (操作于 FreeBSD 4.6.2-RELEASE )
未更新 PORTS-TREE 前，portupgrade 已安装的版本：
pkg_info | grep portupgrade
portupgrade-20020429 Very powerful FreeBSD ports/packages upgrading tool and mor
更新 PORTS-TREE 之后，PORTS 中 portupgrade 的版本：
grep \PORTVERSION= /usr/ports/sysutils/portupgrade/Makefile
PORTVERSION= 20020805
执行 portupgrade 后，portupgrade 自己并未更新。
强制以新的portupgrade取代旧的portupgrade-20020429
portupgrade -o /usr/ports/sysutils/portupgrade portupgrade-20020429
再检查一遍portupgrade 安装的版本：
pkg_info | grep portupgrade
portupgrade-20020805 Very powerful FreeBSD ports/packages upgrading tool and mor
--------------------------------------------------------------------------------
FreshPorts
http://freshports.org/
每一个ports都有专人负责，其更新也是非常迅速，这儿有第一手数据。
--------------------------------------------------------------------------------
网络上的相关文件：
http://freebsd.sinica.edu.tw/~statue/handbook/ports.html
http://freebsd.sinica.edu.tw/pipermail/freebsd-taiwan-doc/2001-April/000013.html
http://www.lsps.tp.edu.tw/~gsyan/freebsd2001/ports.html
http://ohaha.ks.edu.tw/ports.htm
http://ohaha.ks.edu.tw/portupgrade.htm
http://ohaha.ks.edu.tw/portexec.htm
http://www.study-area.net/freebsd/how_to_use_ports_package/how_to_use_ports.htm
http://freebsd.csie.nctu.edu.tw/handbook.big5/handbook197.html
--------------------------------------------------------------------------------
其它：
make install ： 安装所选定的 Port
make deinstall ： 移除已安装的 Port
make reinstall ： 移除之后再安装一次
make clean ： 安装完毕后移除 make 数据夹下的档案
make distclean ： 移除安装后的源文件，以节省磁盘空间
make install
make install clean
make install clean distclean
