Building a Process Model-The Graphical Model Builder-3

|Zoom Submenu（缩放子菜单）||
| ------------- |:-------------:| :-----:|
|

|选择缩放级别作为窗口视图的百分比。|
|SubSystem Submenu（子系统子菜单）||
|

|Create（创建）–创建一个包含选中块的子系统。 Ungroup（取消组合）–取消选中子系统的组合。 |
|Rearrange Blocks Submenu（重排模块块子菜单） ||
|

|With Line Auto Routing（根据自动排线）–通过自动排线调整窗口中选定模块的位置。(视图中需要一个输出模块)Without Line Auto Routing（不根据自动排线）–不通过自动排线调整窗口中选定模块的位置。(视图中需要一个输出模块)|
|Auto Route Lines Submenu（自动路线图子菜单）||
|

|Selected Only（仅选中的）–选中项的自动路线图。 All（所有的）–模型中所有的自动路线图。|
|Help Menu（帮助菜单）||
|

|Help…（帮助）–打开SMOCPro帮助文档。About…（关于）–查看SMOCPro GMB版本信息。|
|Right Mouse Button Menu（鼠标右键菜单）(在主模型窗口) ||
|

|Paste（粘贴）– 从剪贴板中的视图粘贴一个（一些）模块。Grid Show（显示网格）– 显示网格出现状态。Show Block Names（显示模块名称）–显示模块名出现状态。Move to（移动）–将选定模块移动到子系统“SubSystem_1”。只有模型存在子系统时此选项才出现。|
|Right Mouse Button Menu（鼠标右键菜单）(在模块上) ||
|

|Block Properties…（模块属性）–打开模块的属性对话框窗口。Cut（剪切）–从视图中剪切（为了粘贴）一个（多个）选中的模块到剪切板。Copy（复制）–从视图中复制（为了粘贴）一个（多个）选中的模块到剪切板。Create SubSystem（创建子系统）–从选中的模块中创建一个子系统。Fold into MIMO Block （折叠入MIMO模块）–将选定的模块替代成MIMO模块。Move to（移动到）–将选中的模块移动到子系统中。只有当模型中有子系统时此选项才出现。
|Right Mouse Button Menu（鼠标右键菜单）(在子系统上) ||
|

|Block Properties…（模块属性）–打开子系统的属性对话框窗口。Cut（剪切）–从视图中剪切（为了粘贴）一个（多个）选中的模块到剪切板。Copy（复制）–从视图中复制（为了粘贴）一个（多个）选中的模块到剪切板。Open SubSystem（打开子系统）–通过切换选项视图（左下方）使子系统内部为当前视图。Ungroup SubSystem（取消子系统）–提取子系统中的模块到当前视图。Block Properties…（模块属性）–打开模块的属性对话框窗口。Cut（剪切）–从视图中剪切（为了粘贴）一个（多个）选中的模块到剪切板。Copy（复制）–从视图中复制（为了粘贴）一个（多个）选中的模块到剪切板。Create SubSystem（创建子系统）–从选中的模块中创建一个子系统。Fold into MIMO Block （折叠入MIMO模块）–将选定的模块替代成MIMO模块。Move to（移动到）–将选中的模块移动到子系统中。只有当模型中有子系统时此选项才出现。

---

原文：

|Zoom Submenu||
| ------------- |:-------------:| :-----:|
|

|Select the zoom level as a percentage of the window view.|
|SubSystem Submenu||
|

|Create – Create a subsystem containing the selected blocks.Ungroup – Ungroup the selected subsystem.|
|Rearrange Blocks Submenu||
|

|With Line Auto Routing – Change the position of the selected blocks in the window with line auto-routing (An output block is needed on the view).Without Line Auto Routing – Change the position of the selected blocks in the window without line auto-routing (An output block is needed on the view).|
|Auto Route Lines Submenu||
|

|Selected Only – Auto route the selected lines.All – Auto route all the lines in the model.|
|Help Menu||
|

|Help… – Open the SMOCPro help file.About… – View version information for SMOCPro GMB.|
|Right Mouse Button Menu(In the main model window)||
|

|Paste – Paste a (set of) block(s) in the view from the clipboard.Grid Show – Display the status of the grid appearance.Show Block Names – Display the status of the appearance of the Block Name.Move to – Move the selected block(s) into the subsystem “SubSystem_1.” This option is only present when a subsystem exists within the model.|
|Right Mouse Button Menu (on Block)||
|

|Block Properties… – Open the properties dialog window of the block.Cut – Cut (for pasting purposes) a (set of) selected block(s) from the view to the clipboard.Copy – Copy (for pasting purposes) a (set of) selected block(s) from the view to the clipboard.Create SubSystem – Create a SubSystem from the selected block(s).Fold into MIMO Block – Replace the selected block(s) by a MIMO block.Move to – Move the selected block(s) into a subsystem. This option appears only when there are subsystems in the model.|
|Right Mouse Button Menu (on SubSystem)||
|

|Block Properties… – Open the properties dialog window of the subsystem.Cut – Cut (for pasting purposes) a (set of) selected block(s) from the view to the clipboard.Copy – Copy (for pasting purposes) a (set of) selected block(s) from the view to the clipboard.Open SubSystem – Make the inside of the subsystem the current view by switching the (bottom left) tab view.Ungroup SubSystem – Extract the blocks in the subsystem into the current view.Block Properties… – Open the properties dialog window of the block.Cut – Cut (for pasting purposes) a (set of) selected block(s) from the view to the clipboard.Copy – Copy (for pasting purposes) a (set of) selected block(s) from the view to the clipboard.Create SubSystem – Create a subsystem from the selected block(s).Fold into MIMO Block – Replace the selected block(s) by a MIMO block.Move to – Move the selected block(s) into a subsystem. This option appears only when there are subsystems in the model.|

---

2016.7.23