前言
UIBezierPath是UIKit中的一个关于图形绘制的类，是通过Quartz 2D也就是CG（Core Graphics）CGPathRef的封装得到的，从高级特性支持来看不及CG。
UIBezierPath类可以绘制矩形、圆形、直线、曲线以及它们的组合图形。
UIBezierPath对象
对象创建方法
// 创建基本路径
+ (instancetype)bezierPath;
// 创建矩形路径
+ (instancetype)bezierPathWithRect:(CGRect)rect;
// 创建椭圆路径
+ (instancetype)bezierPathWithOvalInRect:(CGRect)rect;
// 创建圆角矩形
+ (instancetype)bezierPathWithRoundedRect:(CGRect)rect cornerRadius:(CGFloat)cornerRadius; // rounds all corners with the same horizontal and vertical radius
// 创建指定位置圆角的矩形路径
+ (instancetype)bezierPathWithRoundedRect:(CGRect)rect byRoundingCorners:(UIRectCorner)corners cornerRadii:(CGSize)cornerRadii;
// 创建弧线路径
+ (instancetype)bezierPathWithArcCenter:(CGPoint)center radius:(CGFloat)radius startAngle:(CGFloat)startAngle endAngle:(CGFloat)endAngle clockwise:(BOOL)clockwise;
// 通过CGPath创建
+ (instancetype)bezierPathWithCGPath:(CGPathRef)CGPath;
相关属性和方法
- 属性
// 与之对应的CGPath
@property(nonatomic) CGPathRef CGPath;
- (CGPathRef)CGPath NS_RETURNS_INNER_POINTER CF_RETURNS_NOT_RETAINED;
// 是否为空
@property(readonly,getter=isEmpty) BOOL empty;
// 整个路径相对于原点的位置及宽高
@property(nonatomic,readonly) CGRect bounds;
// 当前画笔位置
@property(nonatomic,readonly) CGPoint currentPoint;
// 线宽
@property(nonatomic) CGFloat lineWidth;
// 终点类型
@property(nonatomic) CGLineCap lineCapStyle;
typedef CF_ENUM(int32_t, CGLineCap) {
kCGLineCapButt,
kCGLineCapRound,
kCGLineCapSquare
};
// 交叉点的类型
@property(nonatomic) CGLineJoin lineJoinStyle;
typedef CF_ENUM(int32_t, CGLineJoin) {
kCGLineJoinMiter,
kCGLineJoinRound,
kCGLineJoinBevel
};
// 两条线交汇处内角和外角之间的最大距离,需要交叉点类型为kCGLineJoinMiter是生效，最大限制为10
@property(nonatomic) CGFloat miterLimit;
// 个人理解为绘线的精细程度，默认为0.6，数值越大，需要处理的时间越长
@property(nonatomic) CGFloat flatness;
// 决定使用even-odd或者non-zero规则
@property(nonatomic) BOOL usesEvenOddFillRule;
- 方法
// 反方向绘制path
- (UIBezierPath *)bezierPathByReversingPath;
// 设置画笔起始点
- (void)moveToPoint:(CGPoint)point;
// 从当前点到指定点绘制直线
- (void)addLineToPoint:(CGPoint)point;
// 添加弧线
- (void)addArcWithCenter:(CGPoint)center radius:(CGFloat)radius startAngle:(CGFloat)startAngle endAngle:(CGFloat)endAngle clockwise:(BOOL)clockwise NS_AVAILABLE_IOS(4_0);
/* center弧线圆心坐标 radius弧线半径 startAngle弧线起始角度 endAngle弧线结束角度 clockwise是否顺时针绘制 */
// 添加贝塞尔曲线
- (void)addQuadCurveToPoint:(CGPoint)endPoint controlPoint:(CGPoint)controlPoint;
/* endPoint终点 controlPoint控制点 */
- (void)addCurveToPoint:(CGPoint)endPoint controlPoint1:(CGPoint)controlPoint1 controlPoint2:(CGPoint)controlPoint2;
/* endPoint终点 controlPoint1、controlPoint2控制点 */
// 移除所有的点，删除所有的subPath
- (void)removeAllPoints;
// 将bezierPath添加到当前path
- (void)appendPath:(UIBezierPath *)bezierPath;
// 填充
- (void)fill;
// 路径绘制
- (void)stroke;
// 在这以后的图形绘制超出当前路径范围则不可见
- (void)addClip;
直线
- (void)drawRect:(CGRect)rect{
[[UIColor redColor] set];
UIBezierPath* path = [UIBezierPath bezierPath];
path.lineWidth = 5.f;
path.lineCapStyle = kCGLineCapRound;
path.lineJoinStyle = kCGLineCapRound;
// 起点
[path moveToPoint:CGPointMake(20, 100)];
// 绘制线条
[path addLineToPoint:CGPointMake(200, 20)];
[path stroke];
}
矩形
- 直角矩形
- (void)drawRect:(CGRect)rect{
[[UIColor redColor] set];
// 创建矩形路径对象
UIBezierPath * path = [UIBezierPath bezierPathWithRect:CGRectMake(50, 50, 150, 100)];
path.lineWidth = 5.f;
path.lineCapStyle = kCGLineCapRound;
path.lineJoinStyle = kCGLineCapRound;
[path stroke];
}
- 圆角矩形
- (void)drawRect:(CGRect)rect{
[[UIColor redColor] set];
// 创建圆角矩形路径对象
UIBezierPath* path = [UIBezierPath bezierPathWithRoundedRect:CGRectMake(20, 20, 150, 100) cornerRadius:30]; // 圆角半径为30
path.lineWidth = 5.f;
path.lineCapStyle = kCGLineCapRound;
path.lineJoinStyle = kCGLineCapRound;
[path stroke];
}
- 指定位置圆角矩形
- (void)drawRect:(CGRect)rect{
[[UIColor redColor] set];
UIBezierPath* path = [UIBezierPath bezierPathWithRoundedRect:CGRectMake(20, 20, 150, 100) byRoundingCorners:UIRectCornerTopLeft cornerRadii:CGSizeMake(30, 30)];
path.lineWidth = 5.f;
path.lineCapStyle = kCGLineCapRound;
path.lineJoinStyle = kCGLineCapRound;
[path stroke];
}
corners：圆角位置 cornerRadii：圆角大小
typedef NS_OPTIONS(NSUInteger, UIRectCorner) {
UIRectCornerTopLeft = 1 << 0,
UIRectCornerTopRight = 1 << 1,
UIRectCornerBottomLeft = 1 << 2,
UIRectCornerBottomRight = 1 << 3,
UIRectCornerAllCorners = ~0UL
};
圆形和椭圆形
- 圆形
- (void)drawRect:(CGRect)rect{
[[UIColor redColor] set];
// 创建圆形路径对象
UIBezierPath * path = [UIBezierPath bezierPathWithOvalInRect:CGRectMake(50, 50, 100, 100)];
path.lineWidth = 5.f;
path.lineCapStyle = kCGLineCapRound;
path.lineJoinStyle = kCGLineCapRound;
[path stroke];
}
- 椭圆形
- (void)drawRect:(CGRect)rect{
[[UIColor redColor] set];
// 创建椭圆形路径对象
UIBezierPath * path = [UIBezierPath bezierPathWithOvalInRect:CGRectMake(50, 50, 180, 100)];
path.lineWidth = 5.f;
path.lineCapStyle = kCGLineCapRound;
path.lineJoinStyle = kCGLineCapRound;
[path stroke];
}
曲线
- 弧线
- (void)drawRect:(CGRect)rect{
[[UIColor redColor] set];
// 创建弧线路径对象
UIBezierPath* path = [UIBezierPath bezierPathWithArcCenter:CGPointMake(100, 100)
radius:70
startAngle:3.1415926
endAngle:3.1415926 *3/2
clockwise:YES];
path.lineWidth = 5.f;
path.lineCapStyle = kCGLineCapRound;
path.lineJoinStyle = kCGLineCapRound;
[path stroke];
}
center：弧线圆心坐标
radius：弧线半径
startAngle：弧线起始角度
endAngle：弧线结束角度
clockwise：是否顺时针绘制
默认坐标系统中的角度值
- 贝塞尔曲线1
- (void)drawRect:(CGRect)rect{
[[UIColor redColor] set];
UIBezierPath* path = [UIBezierPath bezierPath];
path.lineWidth = 5.f;
path.lineCapStyle = kCGLineCapRound;
path.lineJoinStyle = kCGLineCapRound;
[path moveToPoint:CGPointMake(20, 100)];
// 给定终点和控制点绘制贝塞尔曲线
[path addQuadCurveToPoint:CGPointMake(150, 100) controlPoint:CGPointMake(20, 0)];
[path stroke];
}
- 贝塞尔曲线2
- (void)drawRect:(CGRect)rect{
[[UIColor redColor] set];
UIBezierPath* path = [UIBezierPath bezierPath];
path.lineWidth = 5.f;
path.lineCapStyle = kCGLineCapRound;
path.lineJoinStyle = kCGLineCapRound;
[path moveToPoint:CGPointMake(20, 100)];
// 给定终点和两个控制点绘制贝塞尔曲线
[path addCurveToPoint:CGPointMake(220, 100) controlPoint1:CGPointMake(120, 20) controlPoint2:CGPointMake(120, 180)];
[path stroke];
}
扇形
- (void)drawRect:(CGRect)rect{
[[UIColor redColor] set]; // 画笔颜色设置
UIBezierPath * path = [UIBezierPath bezierPath]; // 创建路径
[path moveToPoint:CGPointMake(100, 100)]; // 设置起始点
[path addArcWithCenter:CGPointMake(100, 100) radius:75 startAngle:0 endAngle:3.14159/2 clockwise:NO]; // 绘制一个圆弧
path.lineWidth = 5.0;
path.lineCapStyle = kCGLineCapRound; //线条拐角
path.lineJoinStyle = kCGLineCapRound; //终点处理
[path closePath]; // 封闭未形成闭环的路径
[path stroke]; // 绘制
}
多边形
- (void)drawRect:(CGRect)rect{
[[UIColor redColor] set];
UIBezierPath* path = [UIBezierPath bezierPath];
path.lineWidth = 5.f;
path.lineCapStyle = kCGLineCapRound;
path.lineJoinStyle = kCGLineCapRound;
// 起点
[path moveToPoint:CGPointMake(100, 50)];
// 添加直线
[path addLineToPoint:CGPointMake(150, 50)];
[path addLineToPoint:CGPointMake(200, 100)];
[path addLineToPoint:CGPointMake(200, 150)];
[path addLineToPoint:CGPointMake(150, 200)];
[path addLineToPoint:CGPointMake(100, 200)];
[path addLineToPoint:CGPointMake(50, 150)];
[path addLineToPoint:CGPointMake(50, 100)];
[path closePath];
//根据坐标点连线
[path stroke];
[path fill];
}
参考：
http://www.jianshu.com/p/60aad4957923
http://www.jianshu.com/p/bbb2cc485a45
版权声明：出自MajorLMJ技术博客的原创作品 ，转载时必须注明出处及相应链接！