工具下载：
wget ftp://ftp.foolabs.com/pub/xpdf/xpdf-chinese-simplified.tar.gz PDF工具
wget http://www.swftools.org/swftools-0.9.2.tar.gz pdf转换工具
wget http://www.nginxs.com/download/font.zip 字体
安装配置
tar xvf
xpdf-chinese-simplified.tar.gz
unzip font.zip
mv Gbsn00lp.ttf gkai00mp.ttf
xpdf-chinese-simplified/CMap
cp -a
xpdf-chinese-simplified /usr/local/
vim
/usr/local/
xpdf-chinese-simplified/add-to-xpdfrc
#—– begin Chinese Simplified support package (2004-jul-27)
cidToUnicode Adobe-GB1 /usr/share/xpdf/xpdf-chinese-simplified/Adobe-GB1.cidToUnicode
unicodeMap ISO-2022-CN /usr/share/xpdf/xpdf-chinese-simplified/ISO-2022-CN.unicodeMap
unicodeMap EUC-CN /usr/share/xpdf/xpdf-chinese-simplified/EUC-CN.unicodeMap
unicodeMap GBK /usr/share/xpdf/xpdf-chinese-simplified/GBK.unicodeMap
cMapDir Adobe-GB1 /usr/share/xpdf/xpdf-chinese-simplified/CMap
toUnicodeDir /usr/share/xpdf/xpdf-chinese-simplified/CMap
fontDir /usr/share/xpdf/xpdf-chinese-simplified/CMap
displayCIDFontTT Adobe-GB1 /usr/share/xpdf/xpdf-chinese-simplified/CMap/gkai00mp.ttf
displayCIDFontTT Adobe-GB1 /usr/share/xpdf/xpdf-chinese-simplified/CMap/simhei.ttf
##—– end Chinese Simplified support package
simhei.ttf字体是从windows机器copy过来的
tar xvf
swftools-0.9.2.tar.gz
cd
swftools-0.9.2
./configure --prefix=/usr/local/swftools
make
make install
转换：
/usr/local/swftools/bin/pdf2swf -t P020101230455172210348.pdf -o a.swf -s flashversion=9 -s languagedir=
/usr/share/xpdf/xpdf-chinese-simplified
pdf2swf参数说明
-h , –help Print short help message and exit 打印帮助信息
-V , –version Print version info and exit 打印版本号
-o , –output file.swf Direct output to file.swf. If file.swf contains ‘13568621′ (file13568630.swf), then each page指定输出的swf文件名
-p , –pages range Convert only pages in range with range e.g. 1-20
or 1,4,6,9-11 or
指定转换的页面范围，使用的页码描述方法与打印机打印文件时候的选页一样
-P , –password password Use password for deciphering the pdf.指定打开pdf的密码
-v , –verbose Be verbose. Use more than one -v for greater effect.转换时输出详细的内容
-z , –zlib Use Flash 6 (MX) zlib compression.使用Flash 6的zlib压缩机制
-i , –ignore Allows pdf2swf to change the draw order of the pdf. This may make the generated允许程序修改pdf的绘制顺序，可能会导致结果与原来有差异
-j , –jpegquality quality Set quality of embedded jpeg pictures to quality. 0 is worst (small), 100 is best (big). (default:85)设置转换其中的jpeg图片的质量，从0到100，默认值是85。
-s , –set param=value Set a SWF encoder specific parameter. See pdf2swf -s help for more information. 设置SWF转码时候的参数，具体参数可以用pdf2swf -s help获取
-w , –samewindow When converting pdf hyperlinks, don’t make the links open a new window. 设置转换后的swf打开原pdf中的连接时使用相同的窗口
-t , –stop Insert a stop() command in each page. 在每页结尾添加一个stop()命令
-T , –flashversion num Set Flash Version in the SWF header to num. 设置SWF所使用的flash版本号
-F , –fontdir directory Add directory to the font search path. 指定字体文件所在路径
-b , –defaultviewer Link a standard viewer to the swf file. 指定默认的swf导航文件，用来翻页、放大缩小等等
-l , –defaultloader Link a standard preloader to the swf file which will be displayed while the main swf is loading. 指定默认的swf加载文件，用来显示加载进程效果
-B , –viewer filename Link viewer filename to the swf file. 指定swf导航文件，作用同-b
-L , –preloader filename Link preloader filename to the swf file. 指定swf加载文件，作用同-l
-q , –quiet Suppress normal messages. Use -qq to suppress warnings, also. 不打印普通信息，用-qq就不打印警告信息。
-S , –shapes Don’t use SWF Fonts, but store everything as shape. 不使用字体，所有都转为形状。
-f , –fonts Store full fonts in SWF. (Don’t reduce to used characters). 在swf中保存全部字体。
-G , –flatten Remove as many clip layers from file as possible. 在文件中尽量去除影片层，合并它们
-I , –info Don’t do actual conversion, just display a list of all pages in the PDF. 不做实际转换，仅显示PDF的信息。
-Q , –maxtime n Abort conversion after n seconds. Only available on Unix. 如果运行时间超时则退出。
然后看看-s都可以设置些什么：
PDF Parameters:
PDF device global parameters:
fontdir= a directory with additional fonts 指定字体目录, 与1级参数的-F相若
font= an additional font filename 增加额外的字体文件
pages= the range of pages to convert (example: pages=1-100,210-) 指定页面范围，与1级参数的-p相若
zoom= the resolution (default: 72) 指定分辨率，默认为72dpi
languagedir= Add an xpdf language directory 增加一个xpdf的语言目录，对非西欧字符有用
multiply= Render everything at the resolution 在几倍分辨率下渲染
poly2bitmap Convert graphics to bitmaps 把其中的图形转成点阵
bitmap Convert everything to bitmaps 把所有内容转成点阵（包括字体）
SWF Parameters:
SWF layer options:
jpegsubpixels= resolution adjustment for jpeg images (same as jpegdpi, but in pixels) jpeg图片的分辨率
ppmsubpixels= resolution adjustment for lossless images (same asppmdpi, but in pixels) 无损图片的分辨率
subpixels= shortcut for setting both jpegsubpixels and ppmsubpixels 快速设置上两个参数
drawonlyshapes convert everything to shapes (currently broken) 所有都转成图形
ignoredraworder allow to perform a few optimizations for creating smaller SWFs 允许执行一些小优化
linksopennewwindow make links open a new browser window 链接打开新窗口
linktarget target window name of new links 新链接窗口的名称
linkcolor=
linknameurl Link buttons will be named like the URL they refer to (handy for iterating through links with actionscript) 链接名称与链接URL一致
storeallcharacters don’t reduce the fonts to used characters in the output file 保存所有的字符字体
enablezlib switch on zlib compression (also done if flashversion>=7) 使用zlib压缩
bboxvars store the bounding box of the SWF file in actionscript variables 在as中保存swf的区域大小
dots Take care to handle dots correctly 保存单点显示
reordertags=0/1 (default: 1) perform some tag optimizations 执行某些tag优化
internallinkfunction= when the user clicks a internal link (to a different page) in the converted file, this actionscript function is called 内部链接函数，如果点击一个内部链接，将调用该actionscript函数
externallinkfunction= when the user clicks an external link (e.g. http://www.foo.bar/) on the converted file, this actionscript function is called 外部链接函数，如果点击一个外部链接，将调用该actionscript函数
disable_polygon_conversion never convert strokes to polygons (will remove capstyles and joint styles) 不要将笔画转成多边形
caplinewidth= the minimum thichness a line needs to have so that capstyles become visible (and are converted) 线条最低转换宽度，比这个细的线条将不转换
insertstop put an ActionScript “STOP” tag in every frame 在swf的每个桢中添加stop()函数
protect add a “protect” tag to the file, to prevent loadingin the Flash editor 增加protect标签，禁止在flash中加载该swf
flashversion= the SWF fileversion (6) 设置最低swf版本
framerate= SWF framerate 设置桢率
minlinewidth= convert horizontal/vertical boxes smaller than thiswidth to lines (0.05)将宽度少于某值的矩形转成线条
simpleviewer Add next/previous buttons to the SWF 使用简单的导航
animate insert a showframe tag after each placeobject (animate draw order of PDF files) ？？？
jpegquality= set compression quality of jpeg images 设置jpeg的压缩质量
splinequality= Set the quality of spline convertion to value (0-100, default: 100). 设置样条曲线的转换质量
disablelinks Disable links. 禁止链接
中文转换问题参考
http://mirror.sars.tw/FreeBSD_Chinese_HOWTO/xpdf.html