配置暂存，过后delete

part I

[1.安装 sox ，ffmpeg 和 PyAudio：]

sudo apt-get install portaudio19-dev python-pyaudio python3-pyaudio sox pulseaudio libsox-fmt-all ffmpeg

pip3 install pyaudio

[2.安装 启动依赖]

然后cd 文件目录安装第一部分依赖，用于交互

pip3 install -r requirements.txt

*具体requirements.txt文件内容*

pyyaml>=4.2b1
requests==2.21.0
baidu-aip==2.0.0.1
pydub==0.23.1
python-dateutil==2.7.5
watchdog==0.9.0
pytz==2018.9
fire==0.1.3
tornado==5.1.1
markdown==3.0.1
semver==2.8.1
websocket==0.2.1
websocket-client==0.56.0
pyjwt==1.7.1
pypinyin
jieba

注意websocket一定安装到位~~~~

[3.编译snowboy]

[3.1安装 swig]

确保系统已经有swig

wget http://hahack-1253537070.file.myqcloud.com/misc/swig-3.0.10.tar.gz

tar xvf swig-3.0.10.tar.gz

cd swig-3.0.10

sudo apt-get -y update

sudo apt-get install -y libpcre3 libpcre3-dev

./configure --prefix=/usr --without-clisp --without-maximum-compile-warnings

make

sudo make install

sudo install -v -m755 -d /usr/share/doc/swig-3.0.10

sudo cp -v -R Doc/* /usr/share/doc/swig-3.0.10

sudo apt-get install -y libatlas-base-dev

如果提示找不到 python3-config 命令，你还需要安装 python3-dev：

sudo apt-get install python3-dev  # 注意 Ubuntu 18.04 可能叫 python3-all-dev

[3.2编译snowboy]

wget http://hahack-1253537070.file.myqcloud.com/misc/snowboy.tar.bz2  # 使用我fork出来的版本以确保接口兼容

tar -xvjf snowboy.tar.bz2

cd snowboy/swig/Python3

make

cp _snowboydetect.so <文件~~~~根目录/snowboy/>

如果遇到bug：
snowboy bug

 /swig-3.0.10/snowboy/swig/Python3 $^C

[4.树莓派&香橙派设备运行之前还需要注意]

[4.1是否安装wiringPi]

查看wiring版本信息

gpio -v

返回如下：ok

gpio version: 2.50
Copyright (c) 2012-2018 Gordon Henderson
This is free software with ABSOLUTELY NO WARRANTY.
For details type: gpio -warranty

Raspberry Pi Details:
  Type: Pi 2, Revision: 01, Memory: 1024MB, Maker: Embest
  * Device tree is enabled.
  *--> Raspberry Pi 2 Model B Rev 1.1
  * This Raspberry Pi supports user-level GPIO access.

查看io信息

gpio readall

返回如下map

 +-----+-----+---------+------+---+---Pi 2---+---+------+---------+-----+-----+
 | BCM | wPi |   Name  | Mode | V | Physical | V | Mode | Name    | wPi | BCM |
 +-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
 |     |     |    3.3v |      |   |  1 || 2  |   |      | 5v      |     |     |
 |   2 |   8 |   SDA.1 | ALT0 | 1 |  3 || 4  |   |      | 5v      |     |     |
 |   3 |   9 |   SCL.1 | ALT0 | 1 |  5 || 6  |   |      | 0v      |     |     |
 |   4 |   7 | GPIO. 7 |   IN | 0 |  7 || 8  | 1 | ALT0 | TxD     | 15  | 14  |
 |     |     |      0v |      |   |  9 || 10 | 1 | ALT0 | RxD     | 16  | 15  |
 |  17 |   0 | GPIO. 0 |   IN | 0 | 11 || 12 | 0 | IN   | GPIO. 1 | 1   | 18  |
 |  27 |   2 | GPIO. 2 |   IN | 0 | 13 || 14 |   |      | 0v      |     |     |
 |  22 |   3 | GPIO. 3 |   IN | 0 | 15 || 16 | 0 | IN   | GPIO. 4 | 4   | 23  |
 |     |     |    3.3v |      |   | 17 || 18 | 0 | IN   | GPIO. 5 | 5   | 24  |
 |  10 |  12 |    MOSI | ALT0 | 0 | 19 || 20 |   |      | 0v      |     |     |
 |   9 |  13 |    MISO | ALT0 | 0 | 21 || 22 | 0 | IN   | GPIO. 6 | 6   | 25  |
 |  11 |  14 |    SCLK | ALT0 | 0 | 23 || 24 | 1 | OUT  | CE0     | 10  | 8   |
 |     |     |      0v |      |   | 25 || 26 | 1 | OUT  | CE1     | 11  | 7   |
 |   0 |  30 |   SDA.0 |   IN | 1 | 27 || 28 | 1 | IN   | SCL.0   | 31  | 1   |
 |   5 |  21 | GPIO.21 |   IN | 1 | 29 || 30 |   |      | 0v      |     |     |
 |   6 |  22 | GPIO.22 |   IN | 1 | 31 || 32 | 0 | IN   | GPIO.26 | 26  | 12  |
 |  13 |  23 | GPIO.23 |   IN | 0 | 33 || 34 |   |      | 0v      |     |     |
 |  19 |  24 | GPIO.24 |   IN | 0 | 35 || 36 | 0 | IN   | GPIO.27 | 27  | 16  |
 |  26 |  25 | GPIO.25 |   IN | 0 | 37 || 38 | 0 | IN   | GPIO.28 | 28  | 20  |
 |     |     |      0v |      |   | 39 || 40 | 0 | IN   | GPIO.29 | 29  | 21  |
 +-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
 | BCM | wPi |   Name  | Mode | V | Physical | V | Mode | Name    | wPi | BCM |
 +-----+-----+---------+------+---+---Pi 2---+---+------+---------+-----+-----+

否则执行安装
要安装git要安装git要安装git要安装git*

sudo apt-get install git-core

如果bug更新刷一刷

sudo apt-get update

安装来了

git clone git://git.drogon.net/wiringPi

cd wiringPi

./build

若需要更新wiringPi库，输入以下命令：

cd wiringPi

git pull origin

最后，再来一个检查

gpio -v

树莓派一般自备wiringPi，香橙派？就看看了

[5.关于ReSpeaker_Mic_Array_v2.0]

[5.1关于驱动]

/ReSpeaker_Mic_Array_v2.0/

Linux :无需安装驱动
对于 Linux 系统 :ReSpeaker Mic Array v2.0 支持 USB DFU。可通过python script dfu.py来通过 USB 更新固件。

sudo  apt-get  update

sudo  pip  install  pyusb  click

git  clone  https://github.com/respeaker/usb_4_mic_array.git

cd  usb_4_mic_array

sudo  python  dfu.py  --download  1_channel_firmware.bin 

# 上面的dfu参数可以在respeaker/usb_4_mic_array.git上查看可以选择下载固件

[5.2led]

git clone https://github.com/respeaker/pixel_ring.git

cd  pixel_ring

sudo python setup.py install

sudo  python  examples/usb_mic_array.py

例子

import time from pixel_ring
import pixel_ring
if __name__ == '__main__':
    pixel_ring.change_pattern('echo')  
    while  True:  
        try:  
            pixel_ring.wakeup()  
            time.sleep(3)  
            pixel_ring.think()  
            time.sleep(3)  
            pixel_ring.speak()  
            time.sleep(6)  
            pixel_ring.off()  
            time.sleep(3)  
        except  KeyboardInterrupt:  
            break  
     pixel_ring.off()  
     time.sleep(1)

暂时这样，
对于Part II部分的requirement.txt根据实现的功能进行配置安装
AnyQ暂时~~~~
图像api暂时~~~~
其他功能暂时~~~~
homekit~
配置笔录。~~~~