linux--kubernetes(存储 StatefulSet安装mysql)

StatefulSet

statefulset专门针对有状态的应用(开启关闭有先后顺序),存储有要求(例如mysql主从)

创建无头服务:

[kubeadm@server2 statefulset]$ cat service.yaml 
apiVersion: v1
kind: Service
metadata:
  name: nginx
  labels:
    app: nginx
spec:
  ports:
  - port: 80
    name: web
  clusterIP: None
  selector:
    app: nginx

dns解析

linux--kubernetes(存储 StatefulSet安装mysql)_第1张图片

创建pod:

[kubeadm@server2 statefulset]$ vim deployment.yaml 
apiVersion: apps/v1
kind: StatefulSet
metadata:
  name: web
spec:
  serviceName: "nginx"
  replicas: 2
  selector:
    matchLabels:
      app: nginx
  template:
    metadata:
      labels:
        app: nginx 
    spec:
      containers:
      - name: nginx
        image: nginx
        ports:
        - containerPort: 80
          name: web

web-number number是唯一标识,根据pod数量单调递增

先启动0再启动1,删除再创建pod ip会变,但是名称标识不会变

linux--kubernetes(存储 StatefulSet安装mysql)_第2张图片

linux--kubernetes(存储 StatefulSet安装mysql)_第3张图片

linux--kubernetes(存储 StatefulSet安装mysql)_第4张图片
linux--kubernetes(存储 StatefulSet安装mysql)_第5张图片

加卷:

[kubeadm@server2 statefulset]$ vim deployment.yaml 
apiVersion: apps/v1
kind: StatefulSet
metadata:
  name: web
spec:
  serviceName: "nginx"
  replicas: 2
  selector:
    matchLabels:
      app: nginx
  template:
    metadata:
      labels:
        app: nginx
    spec:
      containers:
      - name: nginx
        image: nginx
        ports:
        - containerPort: 80
          name: web
        volumeMounts:
        - name: www
          mountPath: /usr/share/nginx/html
  volumeClaimTemplates:
  - metadata:
      name: www
    spec:
      accessModes: [ "ReadWriteOnce" ]
      storageClassName: managed-nfs-storage
      resources:
        requests:
          storage: 100Mi

一个一个创建
ip改变,名称不变

linux--kubernetes(存储 StatefulSet安装mysql)_第6张图片

在pv上发布页面

解析

linux--kubernetes(存储 StatefulSet安装mysql)_第7张图片
linux--kubernetes(存储 StatefulSet安装mysql)_第8张图片

可以进行滚动更新
pv卷始终是有序的(重建后)

  • pv和pvc的设计,使得statefulset对存储状态的管理成为了可能
  • pod的创建也是按照编号顺序进行的。比如在web-0进入到running状态,并且conditions为ready之前,web-1一直会处于pending状态
  • statefulset还会为每一个pod分配并创建一个同样编号的pvc。这样,kubernetes就可以通过pv机制为这个pvc绑定对应的pv,从而保证每一个pod都拥有一个独立的volume

使用statefulset部署mysql主从集群

官方链接:
https://kubernetes.io/zh/docs/tasks/run-application/run-replicated-stateful-application/

linux--kubernetes(存储 StatefulSet安装mysql)_第9张图片

cm:
apiVersion: v1
kind: ConfigMap
metadata:
  name: mysql
  labels:
    app: mysql
data:
  master.cnf: |
    # Apply this config only on the master.
    [mysqld]
    log-bin
  slave.cnf: |
    # Apply this config only on slaves.
    [mysqld]
    super-read-only

linux--kubernetes(存储 StatefulSet安装mysql)_第10张图片

services:
apiVersion: v1
kind: Service
metadata:
  name: mysql
  labels:
    app: mysql
spec:
  ports:
  - name: mysql
    port: 3306
  clusterIP: None
  selector:
    app: mysql

---

apiVersion: v1
kind: Service
metadata:
  name: mysql-read
  labels:
    app: mysql
spec:
  ports:
  - name: mysql
    port: 3306
  selector:
    app: mysql

linux--kubernetes(存储 StatefulSet安装mysql)_第11张图片

StatefulSet:

先在私人仓库拉取镜像:mysql:5.7 xtrabackup:1.0

同一个pod里面启动两个容器共享数据

######### 首先尝试部署master ############

[kubeadm@server2 mysql]$ cat statefulset.yaml 
apiVersion: apps/v1
kind: StatefulSet
metadata:
  name: mysql
spec:
  selector:
    matchLabels:
      app: mysql
  serviceName: mysql
  replicas: 1
  template:
    metadata:
      labels:
        app: mysql
    spec:
      initContainers:
      - name: init-mysql
        image: mysql:5.7
        command:
        - bash
        - "-c"
        - |
          set -ex
          # Generate mysql server-id from pod ordinal index.
          [[ `hostname` =~ -([0-9]+)$ ]] || exit 1
          ordinal=${BASH_REMATCH[1]}
          echo [mysqld] > /mnt/conf.d/server-id.cnf
          # Add an offset to avoid reserved server-id=0 value.
          echo server-id=$((100 + $ordinal)) >> /mnt/conf.d/server-id.cnf
          # Copy appropriate conf.d files from config-map to emptyDir.
          if [[ $ordinal -eq 0 ]]; then
            cp /mnt/config-map/master.cnf /mnt/conf.d/
          else
            cp /mnt/config-map/slave.cnf /mnt/conf.d/
          fi
        volumeMounts:
        - name: conf
          mountPath: /mnt/conf.d
        - name: config-map
          mountPath: /mnt/config-map
      containers:
      - name: mysql
        image: mysql:5.7
        env:
        - name: MYSQL_ALLOW_EMPTY_PASSWORD
          value: "1"
        ports:
        - name: mysql
          containerPort: 3306
        volumeMounts:
        - name: data
          mountPath: /var/lib/mysql
          subPath: mysql                      #子目录
        - name: conf
          mountPath: /etc/mysql/conf.d
        resources:
          requests:
            cpu: 500m
            memory: 500Mi
        livenessProbe:
          exec:
            command: ["mysqladmin", "ping"]
          initialDelaySeconds: 30
          periodSeconds: 10
          timeoutSeconds: 5
        readinessProbe:
          exec:
            # Check we can execute queries over TCP (skip-networking is off).
            command: ["mysql", "-h", "127.0.0.1", "-e", "SELECT 1"]
          initialDelaySeconds: 5
          periodSeconds: 2
          timeoutSeconds: 1
      volumes:
      - name: conf
        emptyDir: {}
      - name: config-map
        configMap:
          name: mysql
  volumeClaimTemplates:
  - metadata:
      name: data
    spec:
      accessModes: ["ReadWriteOnce"]
      resources:
        requests:
          storage: 1Gi

创建等待一段时间
初始化容器将文件cp到容器里面去

linux--kubernetes(存储 StatefulSet安装mysql)_第12张图片
初始化数据在pv里面

linux--kubernetes(存储 StatefulSet安装mysql)_第13张图片

访问master

linux--kubernetes(存储 StatefulSet安装mysql)_第14张图片
linux--kubernetes(存储 StatefulSet安装mysql)_第15张图片
改清单消除master,保留pv

########## 启动slave ##########

[kubeadm@server2 mysql]$ cat statefulset.yaml 
apiVersion: apps/v1
kind: StatefulSet
metadata:
  name: mysql
spec:
  selector:
    matchLabels:
      app: mysql
  serviceName: mysql
  replicas: 2
  template:
    metadata:
      labels:
        app: mysql
    spec:
      initContainers:
      - name: init-mysql
        image: mysql:5.7
        command:
        - bash
        - "-c"
        - |
          set -ex
          # Generate mysql server-id from pod ordinal index.
          [[ `hostname` =~ -([0-9]+)$ ]] || exit 1
          ordinal=${BASH_REMATCH[1]}
          echo [mysqld] > /mnt/conf.d/server-id.cnf
          # Add an offset to avoid reserved server-id=0 value.
          echo server-id=$((100 + $ordinal)) >> /mnt/conf.d/server-id.cnf
          # Copy appropriate conf.d files from config-map to emptyDir.
          if [[ $ordinal -eq 0 ]]; then
            cp /mnt/config-map/master.cnf /mnt/conf.d/
          else
            cp /mnt/config-map/slave.cnf /mnt/conf.d/
          fi
        volumeMounts:
        - name: conf
          mountPath: /mnt/conf.d
        - name: config-map
          mountPath: /mnt/config-map
      - name: clone-mysql
        image: xtrabackup:1.0
        command:
        - bash
        - "-c"
        - |
          set -ex
          # Skip the clone if data already exists.
          [[ -d /var/lib/mysql/mysql ]] && exit 0
          # Skip the clone on master (ordinal index 0).
          [[ `hostname` =~ -([0-9]+)$ ]] || exit 1
          ordinal=${BASH_REMATCH[1]}
          [[ $ordinal -eq 0 ]] && exit 0
          # Clone data from previous peer.
          ncat --recv-only mysql-$(($ordinal-1)).mysql 3307 | xbstream -x -C /var/lib/mysql
          # Prepare the backup.
          xtrabackup --prepare --target-dir=/var/lib/mysql
        volumeMounts:
        - name: data
          mountPath: /var/lib/mysql
          subPath: mysql
        - name: conf
          mountPath: /etc/mysql/conf.d
      containers:
      - name: mysql
        image: mysql:5.7
        env:
        - name: MYSQL_ALLOW_EMPTY_PASSWORD
          value: "1"
        ports:
        - name: mysql
          containerPort: 3306
        volumeMounts:
        - name: data
          mountPath: /var/lib/mysql
          subPath: mysql
        - name: conf
          mountPath: /etc/mysql/conf.d
        resources:
          requests:
            cpu: 500m
            memory: 500Mi
        livenessProbe:
          exec:
            command: ["mysqladmin", "ping"]
          initialDelaySeconds: 30
          periodSeconds: 10
          timeoutSeconds: 5
        readinessProbe:
          exec:
            # Check we can execute queries over TCP (skip-networking is off).
            command: ["mysql", "-h", "127.0.0.1", "-e", "SELECT 1"]
          initialDelaySeconds: 5
          periodSeconds: 2
          timeoutSeconds: 1
      - name: xtrabackup
        image: xtrabackup:1.0
        ports:
        - name: xtrabackup
          containerPort: 3307
        command:
        - bash
        - "-c"
        - |
          set -ex
          cd /var/lib/mysql

          # Determine binlog position of cloned data, if any.
          if [[ -f xtrabackup_slave_info && "x$()" != "x" ]]; then
            # XtraBackup already generated a partial "CHANGE MASTER TO" query
            # because we're cloning from an existing slave. (Need to remove the tailing semicolon!)
            cat xtrabackup_slave_info | sed -E 's/;$//g' > change_master_to.sql.in
            # Ignore xtrabackup_binlog_info in this case (it's useless).
            rm -f xtrabackup_slave_info xtrabackup_binlog_info
          elif [[ -f xtrabackup_binlog_info ]]; then
            # We're cloning directly from master. Parse binlog position.
            [[ `cat xtrabackup_binlog_info` =~ ^(.*?)[[:space:]]+(.*?)$ ]] || exit 1
            rm -f xtrabackup_binlog_info xtrabackup_slave_info
            echo "CHANGE MASTER TO MASTER_LOG_FILE='${BASH_REMATCH[1]}',\
                  MASTER_LOG_POS=${BASH_REMATCH[2]}" > change_master_to.sql.in
          fi

          # Check if we need to complete a clone by starting replication.
          if [[ -f change_master_to.sql.in ]]; then
            echo "Waiting for mysqld to be ready (accepting connections)"
            until mysql -h 127.0.0.1 -e "SELECT 1"; do sleep 1; done

            echo "Initializing replication from clone position"
            mysql -h 127.0.0.1 \
                  -e "$(.sql.in), \
                          MASTER_HOST='mysql-0.mysql', \
                          MASTER_USER='root', \
                          MASTER_PASSWORD='', \
                          MASTER_CONNECT_RETRY=10; \
                        START SLAVE;" || exit 1
            # In case of container restart, attempt this at-most-once.
            mv change_master_to.sql.in change_master_to.sql.orig
          fi

          # Start a server to send backups when requested by peers.
          exec ncat --listen --keep-open --send-only --max-conns=1 3307 -c \
            "xtrabackup --backup --slave-info --stream=xbstream --host=127.0.0.1 --user=root"
        volumeMounts:
        - name: data
          mountPath: /var/lib/mysql
          subPath: mysql
        - name: conf
          mountPath: /etc/mysql/conf.d
        resources:
          requests:
            cpu: 100m
            memory: 100Mi 
      volumes:
      - name: conf
        emptyDir: {}
      - name: config-map
        configMap:
          name: mysql
  volumeClaimTemplates:
  - metadata:
      name: data
    spec:
      accessModes: ["ReadWriteOnce"]
      resources:
        requests:
          storage: 1Gi

等待一段时间

在这里插入图片描述
日志:

linux--kubernetes(存储 StatefulSet安装mysql)_第16张图片
linux--kubernetes(存储 StatefulSet安装mysql)_第17张图片linux--kubernetes(存储 StatefulSet安装mysql)_第18张图片

 init --> master mysql:5.7 start --> master xtrabackup start 3307 -->
   init -->slave  clone-mysql cp master 3307 slave pv --> slave start
  • mysql-1 cp mysql-0
  • mysql-2 cp mysql-1
  • 以此类推

在这里插入图片描述

一主两从:

linux--kubernetes(存储 StatefulSet安装mysql)_第19张图片
mysql-2 从mysql-1复制的mysql-0的数据

linux--kubernetes(存储 StatefulSet安装mysql)_第20张图片

linux--kubernetes(存储 StatefulSet安装mysql)_第21张图片

写:

在master写

linux--kubernetes(存储 StatefulSet安装mysql)_第22张图片

在slave读:

linux--kubernetes(存储 StatefulSet安装mysql)_第23张图片

回收:

改清单

linux--kubernetes(存储 StatefulSet安装mysql)_第24张图片

如果重新拉起数据不变

回收和拉起都是从0开始,遵守规律

你可能感兴趣的:(linux企业应用基础)