--address ip                                              The IP address for the Kubelet to serve on (set to 0.0.0.0 for all interfaces) (default 0.0.0.0)
--allow-privileged                                        If true, allow containers to request privileged mode. [default=false]
--allow-verification-with-non-compliant-keys              Allow a SignatureVerifier to use keys which are technically non-compliant with RFC6962.
--alsologtostderr                                         log to standard error as well as files
--anonymous-auth                                          Enables anonymous requests to the Kubelet server. Requests that are not rejected by another authentication method are treated as anonymous requests. Anonymous requests have
--application-metrics-count-limit int                     Max number of application metrics to store (per container) (default 100)
--authentication-token-webhook                            Use the TokenReview API to determine authentication for bearer tokens.
--authentication-token-webhook-cache-ttl duration         The duration to cache responses from the webhook token authenticator. (default 2m0s)
--authorization-mode string                               Authorization mode for Kubelet server. Valid options are AlwaysAllow or Webhook. Webhook mode uses the SubjectAcce***eview API to determine authorization. (default "AlwaysAl
--authorization-webhook-cache-authorized-ttl duration     The duration to cache 'authorized' responses from the webhook authorizer. (default 5m0s)
--authorization-webhook-cache-unauthorized-ttl duration   The duration to cache 'unauthorized' responses from the webhook authorizer. (default 30s)
--azure-container-registry-config string                  Path to the file container Azure container registry configuration information.
--boot-id-file string                                     Comma-separated list of files to check for boot-id. Use the first one that exists. (default "/proc/sys/kernel/random/boot_id")
--cadvisor-port int32                                     The port of the localhost cAdvisor endpoint (default 4194)
--cert-dir string                                         The directory where the TLS certs are located (by default /var/run/kubernetes). If --tls-cert-file and --tls-private-key-file are provided, this flag will be ignored. (defau
--cgroup-driver string                                    Driver that the kubelet uses to manipulate cgroups on the host.  Possible values: 'cgroupfs', 'systemd' (default "cgroupfs")
--cgroup-root string                                      Optional root cgroup to use for pods. This is handled by the container runtime on a best effort basis. Default: '', which means use the container runtime default.
--chaos-chance float                                      If > 0.0, introduce random client errors and latency. Intended for testing. [default=0.0]
--client-ca-file string                                   If set, any request presenting a client certificate signed by one of the authorities in the client-ca-file is authenticated with an identity corresponding to the CommonName
--cloud-config string                                     The path to the cloud provider configuration file.  Empty string for no configuration file.
--cloud-provider string                                   The provider for cloud services. By default, kubelet will attempt to auto-detect the cloud provider. Specify empty string for running with no cloud provider. [default=auto-d
--cluster-dns string                                      IP address for a cluster DNS server.  This value is used for containers' DNS server in case of Pods with "dnsPolicy=ClusterFirst"
--cluster-domain string                                   Domain for this cluster.  If set, kubelet will configure all containers to search this domain in addition to the host's search domains
--cni-bin-dir string                                      The full path of the directory in which to search for CNI plugin binaries. Default: /opt/cni/bin
--cni-conf-dir string                                     The full path of the directory in which to search for CNI config files. Default: /etc/cni/net.d
--container-hints string                                  location of the container hints file (default "/etc/cadvisor/container_hints.json")
--container-hints string                                  location of the container hints file (default "/etc/cadvisor/container_hints.json")
--container-runtime string                                The container runtime to use. Possible values: 'docker', 'rkt'. Default: 'docker'. (default "docker")
--container-runtime-endpoint string                       [Experimental] The unix socket endpoint of remote runtime service. The endpoint is used only when CRI integration is enabled (--experimental-cri)
--containerized                                           Experimental support for running kubelet in a container.  Intended for testing. [default=false]
--cpu-cfs-quota                                           Enable CPU CFS quota enforcement for containers that specify CPU limits (default true)
--docker string                                           docker endpoint (default "unix:///var/run/docker.sock")
--docker-endpoint string                                  Use this for the docker endpoint to communicate with (default "unix:///var/run/docker.sock")
--docker-env-metadata-whitelist string                    a comma-separated list of environment variable keys that needs to be collected for docker containers
--docker-exec-handler string                              Handler to use when executing a command in a container. Valid values are 'native' and 'nsenter'. Defaults to 'native'. (default "native")
--docker-only                                             Only report docker containers in addition to root stats
--docker-root string                                      DEPRECATED: docker root is read from docker info (this is a fallback, default: /var/lib/docker) (default "/var/lib/docker")
--enable-controller-attach-detach                         Enables the Attach/Detach controller to manage attachment/detachment of volumes scheduled to this node, and disables kubelet from executing any attach/detach operations (def
--enable-custom-metrics                                   Support for gathering custom metrics.
--enable-debugging-handlers                               Enables server endpoints for log collection and local running of containers and commands (default true)
--enable-load-reader                                      Whether to enable cpu load reader
--enable-server                                           Enable the Kubelet's server (default true)
--event-burst int32                                       Maximum size of a bursty event records, temporarily allows event records to burst to this number, while still not exceeding event-qps. Only used if --event-qps > 0 (default
--event-qps int32                                         If > 0, limit event creations per second to this value. If 0, unlimited. (default 5)
--event-storage-age-limit string                          Max length of time for which to store events (per type). Value is a comma separated list of key values, where the keys are event types (e.g.: creation, oom) or "default" and
--event-storage-event-limit string                        Max number of events to store (per type). Value is a comma separated list of key values, where the keys are event types (e.g.: creation, oom) or "default" and the value is a
--eviction-hard string                                    A set of eviction thresholds (e.g. memory.available<1Gi) that if met would trigger a pod eviction. (default "memory.available<100Mi")
--eviction-max-pod-grace-period int32                     Maximum allowed grace period (in seconds) to use when terminating pods in response to a soft eviction threshold being met.  If negative, defer to pod specified value.
--eviction-minimum-reclaim string                         A set of minimum reclaims (e.g. imagefs.available=2Gi) that describes the minimum amount of resource the kubelet will reclaim when performing a pod eviction if that resource
--eviction-pressure-transition-period duration            Duration for which the kubelet has to wait before transitioning out of an eviction pressure condition. (default 5m0s)
--eviction-soft string                                    A set of eviction thresholds (e.g. memory.available<1.5Gi) that if met over a corresponding grace period would trigger a pod eviction.
--eviction-soft-grace-period string                       A set of eviction grace periods (e.g. memory.available=1m30s) that correspond to how long a soft eviction threshold must hold before triggering a pod eviction.
--exit-on-lock-contention                                 Whether kubelet should exit upon lock-file contention.
--experimental-allowed-unsafe-sysctls stringSlice         Comma-separated whitelist of unsafe sysctls or unsafe sysctl patterns (ending in *). Use these at your own risk.
--experimental-bootstrap-kubeconfig string                Path to a kubeconfig file that will be used to get client certificate for kubelet. If the file specified by --kubeconfig does not exist, the
--experimental-cgroups-per-qos                            Enable creation of QoS cgroup hierarchy, if true top level QoS and pod cgroups are created.
--experimental-check-node-capabilities-before-mount       [Experimental] if set true, the kubelet will check the underlying node for required componenets (binaries, etc.) before performing the mount
--experimental-cri                                        [Experimental] Enable the Container Runtime Interface (CRI) integration. If --container-runtime is set to "remote", Kubelet will communicate with the runtime/image CRI serve
--experimental-fail-swap-on                               Makes the Kubelet fail to start if swap is enabled on the node. This is a temporary opton to maintain legacy behavior, failing due to swap enabled will happen by default in
--experimental-kernel-memcg-notification                  If enabled, the kubelet will integrate with the kernel memcg notification to determine if memory eviction thresholds are crossed rather than polling.
--experimental-mounter-path string                        [Experimental] Path of mounter binary. Leave empty to use the default mount.
--experimental-nvidia-gpus int32                          Number of NVIDIA GPU devices on this node. Only 0 (default) and 1 are currently supported.
--feature-gates string                                    A set of key=value pairs that describe feature gates for alpha/experimental features. Options are:
AllAlpha=true|false (ALPHA - default=false)
AllowExtTrafficLocalEndpoints=true|false (BETA - default=true)
AppArmor=true|false (BETA - default=true)
DynamicKubeletConfig=true|false (ALPHA - default=false)
DynamicVolumeProvisioning=true|false (ALPHA - default=true)
ExperimentalHostUserNamespaceDefaulting=true|false (ALPHA - default=false)
StreamingProxyRedirects=true|false (ALPHA - default=false)
--file-check-frequency duration                           Duration between checking config files for new data (default 20s)
--global-housekeeping-interval duration                   Interval between global housekeepings (default 1m0s)
--google-json-key string                                  The Google Cloud Platform Service Account JSON Key to use for authentication.
--hairpin-mode string                                     How should the kubelet setup hairpin NAT. This allows endpoints of a Service to loadbalance back to themselves if they should try to access their own Service. Valid values a
--healthz-bind-address ip                                 The IP address for the healthz server to serve on, defaulting to 127.0.0.1 (set to 0.0.0.0 for all interfaces) (default 127.0.0.1)
--healthz-port int32                                      The port of the localhost healthz endpoint (default 10248)
-h, --help                                                    help for hyperkube
--host-ipc-sources stringSlice                            Comma-separated list of sources from which the Kubelet allows pods to use the host ipc namespace. [default="*"] (default [*])
--host-network-sources stringSlice                        Comma-separated list of sources from which the Kubelet allows pods to use of host network. [default="*"] (default [*])
--host-pid-sources stringSlice                            Comma-separated list of sources from which the Kubelet allows pods to use the host pid namespace. [default="*"] (default [*])
--hostname-override string                                If non-empty, will use this string as identification instead of the actual hostname.
--housekeeping-interval duration                          Interval between container housekeepings (default 10s)
--http-check-frequency duration                           Duration between checking http for new data (default 20s)
--image-gc-high-threshold int32                           The percent of disk usage after which image garbage collection is always run. Default: 85% (default 85)
--image-gc-low-threshold int32                            The percent of disk usage before which image garbage collection is never run. Lowest disk usage to garbage collect to. Default: 80% (default 80)
--image-service-endpoint string                           [Experimental] The unix socket endpoint of remote image service. If not specified, it will be the same with container-runtime-endpoint by default. The endpoint is used only
--iptables-drop-bit int32                                 The bit of the fwmark space to mark packets for dropping. Must be within the range [0, 31]. (default 15)
--iptables-masquerade-bit int32                           The bit of the fwmark space to mark packets for SNAT. Must be within the range [0, 31]. Please match this parameter with corresponding parameter in kube-proxy. (default 14)
--ir-data-source string                                   Data source used by InitialResources. Supported options: influxdb, gcm. (default "influxdb")
--ir-dbname string                                        InfluxDB database name which contains metrics required by InitialResources (default "k8s")
--ir-hawkular string                                      Hawkular configuration URL
--ir-influxdb-host string                                 Address of InfluxDB which contains metrics required by InitialResources (default "localhost:8080/api/v1/proxy/namespaces/kube-system/services/monitoring-influxdb:api")
--ir-namespace-only                                       Whether the estimation should be made only based on data from the same namespace.
--ir-password string                                      Password used for connecting to InfluxDB (default "root")
--ir-percentile int                                       Which percentile of samples should InitialResources use when estimating resources. For experiment purposes. (default 90)
--ir-user string                                          User used for connecting to InfluxDB (default "root")
--keep-terminated-pod-volumes                             Keep terminated pod volumes mounted to the node after the pod terminates.  Can be useful for debugging volume related issues.
--kube-api-burst int32                                    Burst to use while talking with kubernetes apiserver (default 10)
--kube-api-content-type string                            Content type of requests sent to apiserver. (default "application/vnd.kubernetes.protobuf")
--kube-api-qps int32                                      QPS to use while talking with kubernetes apiserver (default 5)
--kube-reserved mapStringString                           A set of ResourceName=ResourceQuantity (e.g. cpu=200m,memory=150G) pairs that describe resources reserved for kubernetes system components. Currently only cpu and memory are
--kubeconfig string                                       Path to a kubeconfig file, specifying how to connect to the API server. --api-servers will be used for the location unless --require-kubeconfig is set. (default "/var/lib/ku
--kubelet-cgroups string                                  Optional absolute name of cgroups to create and run the Kubelet in.
--lock-file string                                        The path to file for kubelet to use as a lock file.
--log-backtrace-at traceLocation                          when logging hits line file:N, emit a stack trace (default :0)
--log-cadvisor-usage                                      Whether to log the usage of the cAdvisor container
--log-dir string                                          If non-empty, write log files in this directory
--log-flush-frequency duration                            Maximum number of seconds between log flushes (default 5s)
--logtostderr                                             log to standard error instead of files
--low-diskspace-threshold-mb int32                        The absolute free disk space, in MB, to maintain. When disk space falls below this threshold, new pods would be rejected. Default: 256 (default 256)
--machine-id-file string                                  Comma-separated list of files to check for machine-id. Use the first one that exists. (default "/etc/machine-id,/var/lib/dbus/machine-id")
--make-iptables-util-chains                               If true, kubelet will ensure iptables utility rules are present on host. (default true)
--manifest-url string                                     URL for accessing the container manifest
--manifest-url-header string                              HTTP header to use when accessing the manifest URL, with the key separated from the value with a ':', as in 'key:value'
--master-service-namespace string                         The namespace from which the kubernetes master services should be injected into pods (default "default")
--max-open-files int                                      Number of files that can be opened by Kubelet process. [default=1000000] (default 1000000)
--max-pods int32                                          Number of Pods that can run on this Kubelet. (default 110)
--minimum-image-ttl-duration duration                     Minimum age for an unused image before it is garbage collected.  Examples: '300ms', '10s' or '2h45m'. Default: '2m' (default 2m0s)
--network-plugin string                                   The name of the network plugin to be invoked for various events in kubelet/pod lifecycle
--network-plugin-dir string                               The full path of the directory in which to search for network plugins or CNI config
--network-plugin-mtu int32                                The MTU to be passed to the network plugin, to override the default. Set to 0 to use the default 1460 MTU.
--network-plugin string                                   The name of the network plugin to be invoked for various events in kubelet/pod lifecycle
--network-plugin-dir string                               The full path of the directory in which to search for network plugins or CNI config
--network-plugin-mtu int32                                The MTU to be passed to the network plugin, to override the default. Set to 0 to use the default 1460 MTU.
--node-ip string                                          IP address of the node. If set, kubelet will use this IP address for the node
--node-labels mapStringString                             Labels to add when registering the node in the cluster.  Labels must be key=value pairs separated by ','.
--node-status-update-frequency duration                   Specifies how often kubelet posts node status to master. Note: be cautious when changing the constant, it must work with nodeMonitorGracePeriod in nodecontroller. Default: 1
--non-masquerade-cidr string                              Traffic to IPs outside this range will use IP masquerade. (default "10.0.0.0/8")
--oom-score-adj int32                                     The oom-score-adj value for kubelet process. Values must be within the range [-1000, 1000] (default -999)
--outofdisk-transition-frequency duration                 Duration for which the kubelet has to wait before transitioning out of out-of-disk node condition status. Default: 5m0s (default 5m0s)
--pod-cidr string                                         The CIDR to use for pod IP addresses, only used in standalone mode.  In cluster mode, this is obtained from the master.
--pod-infra-container-image string                        The image whose network/ipc namespaces containers in each pod will use. (default "gcr.io/google_containers/pause-amd64:3.0")
--pod-manifest-path string                                Path to to the directory containing pod manifest files to run, or the path to a single pod manifest file.
--pods-per-core int32                                     Number of Pods per core that can run on this Kubelet. The total number of Pods on this Kubelet cannot exceed max-pods, so max-pods will be used if this calculation results i
--port int32                                              The port for the Kubelet to serve on. (default 10250)
--protect-kernel-defaults                                 Default kubelet behaviour for kernel tuning. If set, kubelet errors if any of kernel tunables is different than kubelet defaults.
--read-only-port int32                                    The read-only port for the Kubelet to serve on with no authentication/authorization (set to 0 to disable) (default 10255)
--really-crash-for-testing                                If true, when panics occur crash. Intended for testing.
--register-node                                           Register the node with the apiserver (defaults to true if --api-servers is set) (default true)
--register-schedulable                                    Register the node as schedulable. Won't have any effect if register-node is false. [default=true] (default true)
--registry-burst int32                                    Maximum size of a bursty pulls, temporarily allows pulls to burst to this number, while still not exceeding registry-qps.  Only used if --registry-qps > 0 (default 10)
--registry-qps int32                                      If > 0, limit registry pull QPS to this value.  If 0, unlimited. [default=5.0] (default 5)
--require-kubeconfig                                      If true the Kubelet will exit if there are configuration errors, and will ignore the value of --api-servers in favor of the server defined in the kubeconfig file.
--resolv-conf string                                      Resolver configuration file used as the basis for the container DNS resolution configuration. (default "/etc/resolv.conf")
--rkt-api-endpoint string                                 The endpoint of the rkt API service to communicate with. Only used if --container-runtime='rkt'. (default "localhost:15441")
--rkt-path string                                         Path of rkt binary. Leave empty to use the first rkt in $PATH.  Only used if --container-runtime='rkt'.
--root-dir string                                         Directory path for managing kubelet files (volume mounts,etc). (default "/var/lib/kubelet")
--runonce                                                 If true, exit after spawning pods from local manifests or remote urls. Exclusive with --api-servers, and --enable-server
--runtime-cgroups string                                  Optional absolute name of cgroups to create and run the runtime in.
--runtime-request-timeout duration                        Timeout of all runtime requests except long running request - pull, logs, exec and attach. When timeout exceeded, kubelet will cancel the request, throw out an error and ret
--seccomp-profile-root string                             Directory path for seccomp profiles. (default "/var/lib/kubelet/seccomp")
--serialize-image-pulls                                   Pull images one at a time. We recommend *not* changing the default value on nodes that run docker daemon with version < 1.9 or an Aufs storage backend. Issue #10959 has more
--stderrthreshold severity                                logs at or above this threshold go to stderr (default 2)
--storage-driver-buffer-duration duration                 Writes in the storage driver will be buffered for this duration, and committed to the non memory backends as a single transaction (default 1m0s)
--storage-driver-db string                                database name (default "cadvisor")
--storage-driver-host string                              database host:port (default "localhost:8086")
--storage-driver-password string                          database password (default "root")
--storage-driver-secure                                   use secure connection with database
--storage-driver-table string                             table name (default "stats")
--storage-driver-user string                              database username (default "root")
--streaming-connection-idle-timeout duration              Maximum time a streaming connection can be idle before the connection is automatically closed. 0 indicates no timeout. Example: '5m' (default 4h0m0s)
--sync-frequency duration                                 Max period between synchronizing running containers and config (default 1m0s)
--system-cgroups /                                        Optional absolute name of cgroups in which to place all non-kernel processes that are not already inside a cgroup under /. Empty for no container. Rolling back the flag requ
--system-reserved mapStringString                         A set of ResourceName=ResourceQuantity (e.g. cpu=200m,memory=150G) pairs that describe resources reserved for non-kubernetes components. Currently only cpu and memory are su
--tls-cert-file string                                    File containing x509 Certificate for HTTPS.  (CA cert, if any, concatenated after server cert). If --tls-cert-file and --tls-private-key-file are not provided, a self-signed
--tls-private-key-file string                             File containing x509 private key matching --tls-cert-file.