3-1 Aruba交换机实用配置-VSF 2020

Aruba 5406R堆叠

Core 5406-1
interface a1-a8,b1-b24,c1-c24,d1-d24 disable
vsf member 1 link 1 a1,a2
vsf enable domain 1
y
会重新启动
show interface brife
show vsf
show vsf link
show vsf member 1
重启后加入下列命令：
vsf member 2 type j9850a（交换机板卡型号）

配置后只需将没有配置的Core 5406-02 交换机接好线加电即可；

///////////////////////////////////////////////////
SLZO_CoreSW01# show modules
Status and Counters - Module Information
Chassis: 5406Rzl2 J9850A
Serial Number: SG93G49052
Allow V2 Modules: No
/////////////////////////////////////////////////////

2930F堆叠

Switch# configure
Switch(config)# vsf member 1 priority 200
Switch(config)# vsf member 1 link 1 22
All configuration on this port has been removed and port is placed in VSF mode.
Switch(config)# vsf member 1 link 2 23
All configuration on this port has been removed and port is placed in VSF mode.
Switch(config)# vsf enable domain 1
To enable VSF, the REST interface will be disabled.
This will save the current configuration and reboot the switch.Continue (y/n)? y
重启

Switch# configure
Switch(config)# vsf member 2 type JL260A mac-address b05ada-9721c0
This will save the current configuration. Continue (y/n)? y
Warning - The link and port should be provisioned for member 2 tojoin the VSF stack.
Switch(config)# vsf member 2 priority 150
Switch(config)# vsf member 2 link 1 2/22
All configuration on this port has been removed and port is placed in VSF mode.
Switch(config)# vsf member 2 link 2 2/23
All configuration on this port has been removed and port is placed in VSF mode.

适用于Aruba 2930F,5400系列交换机
PS：
5406交换机 配置VSF交换机需要万兆板卡接口
2930F交换机 配置VSF，可以用千兆光口或者千兆以太网接口

支持的多台连线方式