arduino+esp8266在Blinker中遇到的问题

0.按照官方文档搭建好开发环境

参考链接：https://www.arduino.cn/thread-83174-1-1.html

1.编译Blinker下的hello_wifi示例程序出错

Arduino:1.6.12 (Windows 10), 开发板："Arduino/Genuino Uno"

In file included from E:\soft\arduino-1.6.12-windows\arduino-1.6.12\libraries\blinker-library-master\src/Blinker.h:132:0,

                 from E:\soft\arduino-1.6.12-windows\arduino-1.6.12\libraries\blinker-library-master\examples\Blinker_Hello\Hello_WiFi\Hello_WiFi.ino:40:

E:\soft\arduino-1.6.12-windows\arduino-1.6.12\libraries\blinker-library-master\src/BlinkerSerialESPMQTT.h:147:27: error: cannot declare field 'BlinkerSerialESPMQTT::Transp' to be of abstract type 'BlinkerSerialMQTT'

         BlinkerSerialMQTT Transp;

                           ^

In file included from E:\soft\arduino-1.6.12-windows\arduino-1.6.12\libraries\blinker-library-master\src/BlinkerSerialESPMQTT.h:4:0,

                 from E:\soft\arduino-1.6.12-windows\arduino-1.6.12\libraries\blinker-library-master\src/Blinker.h:132,

                 from E:\soft\arduino-1.6.12-windows\arduino-1.6.12\libraries\blinker-library-master\examples\Blinker_Hello\Hello_WiFi\Hello_WiFi.ino:40:

E:\soft\arduino-1.6.12-windows\arduino-1.6.12\libraries\blinker-library-master\src/Adapters/BlinkerSerialMQTT.h:26:7: note:   because the following virtual functions are pure within 'BlinkerSerialMQTT':

 class BlinkerSerialMQTT : public BlinkerStream

       ^

In file included from E:\soft\arduino-1.6.12-windows\arduino-1.6.12\libraries\blinker-library-master\src/Adapters/BlinkerSerialMQTT.h:13:0,

                 from E:\soft\arduino-1.6.12-windows\arduino-1.6.12\libraries\blinker-library-master\src/BlinkerSerialESPMQTT.h:4,

                 from E:\soft\arduino-1.6.12-windows\arduino-1.6.12\libraries\blinker-library-master\src/Blinker.h:132,

                 from E:\soft\arduino-1.6.12-windows\arduino-1.6.12\libraries\blinker-library-master\examples\Blinker_Hello\Hello_WiFi\Hello_WiFi.ino:40:

E:\soft\arduino-1.6.12-windows\arduino-1.6.12\libraries\blinker-library-master\src/Blinker/BlinkerStream.h:34:25: note: 	virtual int BlinkerStream::bPrint(char*, const String&)

             virtual int bPrint(char * name, const String & data) = 0;

                         ^

E:\soft\arduino-1.6.12-windows\arduino-1.6.12\libraries\blinker-library-master\src/Blinker/BlinkerStream.h:35:25: note: 	virtual int BlinkerStream::autoPrint(uint32_t)

             virtual int autoPrint(uint32_t id) = 0;

                         ^

E:\soft\arduino-1.6.12-windows\arduino-1.6.12\libraries\blinker-library-master\src/Blinker/BlinkerStream.h:37:25: note: 	virtual int BlinkerStream::aligenieAvail()

             virtual int aligenieAvail() = 0;

                         ^

E:\soft\arduino-1.6.12-windows\arduino-1.6.12\libraries\blinker-library-master\src/Blinker/BlinkerStream.h:38:25: note: 	virtual int BlinkerStream::duerAvail()

             virtual int duerAvail() = 0;

                         ^

E:\soft\arduino-1.6.12-windows\arduino-1.6.12\libraries\blinker-library-master\src/Blinker/BlinkerStream.h:39:25: note: 	virtual int BlinkerStream::needFreshShare()

             virtual int needFreshShare() = 0;

                         ^

出现这个问题是因为开发板选择错了，选择的是 arduino Uno，
解决办法：将开发板改为wifiduino

2.开发板选择错误可能出现的错误：

原因：开发板选择错误，可能选择了Generic ESP8266 module
解决：将开发板选择为wifiduino

3.上传出错情况

可以参考github上的解决方案，特别全：
https://github.com/esp8266/Arduino/blob/master/doc/faq/a01-espcomm_sync-failed.rst