elk7.x建立存储库和快照

elk7.x建立快照可以有效备份索引的信息，创建成功界面如下，接下来讲一下本地创建快照的步骤。

 

创建步骤如下：

1)  在elaselasticsearch.yml创建保存的目录,然后重启elaselasticsearch

2) 用curl命令来创建存储库

[root@216-rsyslog bin]# curl --user elastic -X PUT "localhost:9200/_snapshot/my_backup?pretty" -H 'Content-Type: application/json' -d'
{
  "type": "fs",
  "settings": {
    "location": "/mnt/elasticsearch/backup"
  }
}
'
输出如下：
{
  "error" : {
    "root_cause" : [
      {
        "type" : "security_exception",
        "reason" : "missing authentication credentials for REST request [/_snapshot/my_backup/snapshot_1/_status?pretty]",
        "header" : {
          "WWW-Authenticate" : "Basic realm=\"security\" charset=\"UTF-8\""
        }
      }
    ],
    "type" : "security_exception",
    "reason" : "missing authentication credentials for REST request [/_snapshot/my_backup/snapshot_1/_status?pretty]",
    "header" : {
      "WWW-Authenticate" : "Basic realm=\"security\" charset=\"UTF-8\""
    }
  },
  "status" : 401
}

这里出现了认证报错，因为前面配置了elk的安全性，所有这里需要用--user 用户名参数来输入用户认证，这里我的用户名是elastic。注意：location的路径要和你在path.repo上配置的路径一致，否则会报错

[root@216-rsyslog bin]# curl --user elastic -X PUT "localhost:9200/_snapshot/my_backup?pretty" -H 'Content-Type: application/json' -d'
{
  "type": "fs",
  "settings": {
    "location": "/mnt/elasticsearch/backup"
  }
}
'
Enter host password for user 'elastic':
{
  "acknowledged" : true
}

输入完密码后看到acknowledged字段为true说明成功了，kibana就会显示你创建的库

3) 用curl创建索引

curl --user elastic -X PUT "localhost:9200/_snapshot/my_backup/snapshot_1?wait_for_completion=true&pretty"

这个过程会比较长，不要以为是系统有问题了，耐心等待，等出现如下输出则代表创建成功。

    ],
    "include_global_state" : true,
    "state" : "SUCCESS",
    "start_time" : "2019-11-15T09:41:22.850Z",
    "start_time_in_millis" : 1573810882850,
    "end_time" : "2019-11-15T10:21:09.509Z",
    "end_time_in_millis" : 1573813269509,
    "duration_in_millis" : 2386659,
    "failures" : [ ],
    "shards" : {
      "total" : 28,
      "failed" : 0,
      "successful" : 28
    }
  }
}

此时你就会有如图一一样的索引了，这就是本地创建elk索引的步骤，elk索引如有问题可以通过在kibana点击快照然后点击右下角的restore进行恢复。