FFmpeg的一些结构与函数
libavcodec 下的avcodec.h
AVCodecID:
enum AVCodecID {
AV_CODEC_ID_NONE,
/* video codecs */
AV_CODEC_ID_MPEG1VIDEO,
AV_CODEC_ID_MPEG2VIDEO, ///< preferred ID for MPEG-1/2 video decoding
#if FF_API_XVMC
AV_CODEC_ID_MPEG2VIDEO_XVMC,
#endif /* FF_API_XVMC */
AV_CODEC_ID_H261,
AV_CODEC_ID_H263,
AV_CODEC_ID_RV10,
AV_CODEC_ID_RV20,
AV_CODEC_ID_MJPEG,
AV_CODEC_ID_MJPEGB,
AV_CODEC_ID_LJPEG,
AV_CODEC_ID_SP5X,
AV_CODEC_ID_JPEGLS,
AV_CODEC_ID_MPEG4,
AV_CODEC_ID_RAWVIDEO,
AV_CODEC_ID_MSMPEG4V1,
AV_CODEC_ID_MSMPEG4V2,
AV_CODEC_ID_MSMPEG4V3,
AV_CODEC_ID_WMV1,
AV_CODEC_ID_WMV2,
AV_CODEC_ID_H263P,
AV_CODEC_ID_H263I,
AV_CODEC_ID_FLV1,
AV_CODEC_ID_SVQ1,
AV_CODEC_ID_SVQ3,
AV_CODEC_ID_DVVIDEO,
AV_CODEC_ID_HUFFYUV,
AV_CODEC_ID_CYUV,
AV_CODEC_ID_H264,
AV_CODEC_ID_INDEO3,
AV_CODEC_ID_VP3,
AV_CODEC_ID_THEORA,
AV_CODEC_ID_ASV1,
AV_CODEC_ID_ASV2,
AV_CODEC_ID_FFV1,
AV_CODEC_ID_4XM,
AV_CODEC_ID_VCR1,
AV_CODEC_ID_CLJR,
AV_CODEC_ID_MDEC,
AV_CODEC_ID_ROQ,
AV_CODEC_ID_INTERPLAY_VIDEO,
AV_CODEC_ID_XAN_WC3,
AV_CODEC_ID_XAN_WC4,
AV_CODEC_ID_RPZA,
AV_CODEC_ID_CINEPAK,
AV_CODEC_ID_WS_VQA,
AV_CODEC_ID_MSRLE,
AV_CODEC_ID_MSVIDEO1,
AV_CODEC_ID_IDCIN,
AV_CODEC_ID_8BPS,
AV_CODEC_ID_SMC,
AV_CODEC_ID_FLIC,
AV_CODEC_ID_TRUEMOTION1,
AV_CODEC_ID_VMDVIDEO,
AV_CODEC_ID_MSZH,
AV_CODEC_ID_ZLIB,
AV_CODEC_ID_QTRLE,
AV_CODEC_ID_TSCC,
AV_CODEC_ID_ULTI,
AV_CODEC_ID_QDRAW,
AV_CODEC_ID_VIXL,
AV_CODEC_ID_QPEG,
AV_CODEC_ID_PNG,
AV_CODEC_ID_PPM,
AV_CODEC_ID_PBM,
AV_CODEC_ID_PGM,
AV_CODEC_ID_PGMYUV,
AV_CODEC_ID_PAM,
AV_CODEC_ID_FFVHUFF,
AV_CODEC_ID_RV30,
AV_CODEC_ID_RV40,
AV_CODEC_ID_VC1,
AV_CODEC_ID_WMV3,
AV_CODEC_ID_LOCO,
AV_CODEC_ID_WNV1,
AV_CODEC_ID_AASC,
AV_CODEC_ID_INDEO2,
AV_CODEC_ID_FRAPS,
AV_CODEC_ID_TRUEMOTION2,
AV_CODEC_ID_BMP,
AV_CODEC_ID_CSCD,
AV_CODEC_ID_MMVIDEO,
AV_CODEC_ID_ZMBV,
AV_CODEC_ID_AVS,
AV_CODEC_ID_SMACKVIDEO,
AV_CODEC_ID_NUV,
AV_CODEC_ID_KMVC,
AV_CODEC_ID_FLASHSV,
AV_CODEC_ID_CAVS,
AV_CODEC_ID_JPEG2000,
AV_CODEC_ID_VMNC,
AV_CODEC_ID_VP5,
AV_CODEC_ID_VP6,
AV_CODEC_ID_VP6F,
AV_CODEC_ID_TARGA,
AV_CODEC_ID_DSICINVIDEO,
AV_CODEC_ID_TIERTEXSEQVIDEO,
AV_CODEC_ID_TIFF,
AV_CODEC_ID_GIF,
AV_CODEC_ID_DXA,
AV_CODEC_ID_DNXHD,
AV_CODEC_ID_THP,
AV_CODEC_ID_SGI,
AV_CODEC_ID_C93,
AV_CODEC_ID_BETHSOFTVID,
AV_CODEC_ID_PTX,
AV_CODEC_ID_TXD,
AV_CODEC_ID_VP6A,
AV_CODEC_ID_AMV,
AV_CODEC_ID_VB,
AV_CODEC_ID_PCX,
AV_CODEC_ID_SUNRAST,
AV_CODEC_ID_INDEO4,
AV_CODEC_ID_INDEO5,
AV_CODEC_ID_MIMIC,
AV_CODEC_ID_RL2,
AV_CODEC_ID_ESCAPE124,
AV_CODEC_ID_DIRAC,
AV_CODEC_ID_BFI,
AV_CODEC_ID_CMV,
AV_CODEC_ID_MOTIONPIXELS,
AV_CODEC_ID_TGV,
AV_CODEC_ID_TGQ,
AV_CODEC_ID_TQI,
AV_CODEC_ID_AURA,
AV_CODEC_ID_AURA2,
AV_CODEC_ID_V210X,
AV_CODEC_ID_TMV,
AV_CODEC_ID_V210,
AV_CODEC_ID_DPX,
AV_CODEC_ID_MAD,
AV_CODEC_ID_FRWU,
AV_CODEC_ID_FLASHSV2,
AV_CODEC_ID_CDGRAPHICS,
AV_CODEC_ID_R210,
AV_CODEC_ID_ANM,
AV_CODEC_ID_BINKVIDEO,
AV_CODEC_ID_IFF_ILBM,
#define AV_CODEC_ID_IFF_BYTERUN1 AV_CODEC_ID_IFF_ILBM
AV_CODEC_ID_KGV1,
AV_CODEC_ID_YOP,
AV_CODEC_ID_VP8,
AV_CODEC_ID_PICTOR,
AV_CODEC_ID_ANSI,
AV_CODEC_ID_A64_MULTI,
AV_CODEC_ID_A64_MULTI5,
AV_CODEC_ID_R10K,
AV_CODEC_ID_MXPEG,
AV_CODEC_ID_LAGARITH,
AV_CODEC_ID_PRORES,
AV_CODEC_ID_JV,
AV_CODEC_ID_DFA,
AV_CODEC_ID_WMV3IMAGE,
AV_CODEC_ID_VC1IMAGE,
AV_CODEC_ID_UTVIDEO,
AV_CODEC_ID_BMV_VIDEO,
AV_CODEC_ID_VBLE,
AV_CODEC_ID_DXTORY,
AV_CODEC_ID_V410,
AV_CODEC_ID_XWD,
AV_CODEC_ID_CDXL,
AV_CODEC_ID_XBM,
AV_CODEC_ID_ZEROCODEC,
AV_CODEC_ID_MSS1,
AV_CODEC_ID_MSA1,
AV_CODEC_ID_TSCC2,
AV_CODEC_ID_MTS2,
AV_CODEC_ID_CLLC,
AV_CODEC_ID_MSS2,
AV_CODEC_ID_VP9,
AV_CODEC_ID_AIC,
AV_CODEC_ID_ESCAPE130,
AV_CODEC_ID_G2M,
AV_CODEC_ID_WEBP,
AV_CODEC_ID_HNM4_VIDEO,
AV_CODEC_ID_HEVC,
#define AV_CODEC_ID_H265 AV_CODEC_ID_HEVC
AV_CODEC_ID_FIC,
AV_CODEC_ID_ALIAS_PIX,
AV_CODEC_ID_BRENDER_PIX,
AV_CODEC_ID_PAF_VIDEO,
AV_CODEC_ID_EXR,
AV_CODEC_ID_VP7,
AV_CODEC_ID_SANM,
AV_CODEC_ID_SGIRLE,
AV_CODEC_ID_MVC1,
AV_CODEC_ID_MVC2,
AV_CODEC_ID_HQX,
AV_CODEC_ID_TDSC,
AV_CODEC_ID_HQ_HQA,
AV_CODEC_ID_HAP,
AV_CODEC_ID_DDS,
AV_CODEC_ID_DXV,
AV_CODEC_ID_SCREENPRESSO,
AV_CODEC_ID_RSCC,
AV_CODEC_ID_Y41P = 0x8000,
AV_CODEC_ID_AVRP,
AV_CODEC_ID_012V,
AV_CODEC_ID_AVUI,
AV_CODEC_ID_AYUV,
AV_CODEC_ID_TARGA_Y216,
AV_CODEC_ID_V308,
AV_CODEC_ID_V408,
AV_CODEC_ID_YUV4,
AV_CODEC_ID_AVRN,
AV_CODEC_ID_CPIA,
AV_CODEC_ID_XFACE,
AV_CODEC_ID_SNOW,
AV_CODEC_ID_SMVJPEG,
AV_CODEC_ID_APNG,
AV_CODEC_ID_DAALA,
AV_CODEC_ID_CFHD,
AV_CODEC_ID_TRUEMOTION2RT,
AV_CODEC_ID_M101,
AV_CODEC_ID_MAGICYUV,
AV_CODEC_ID_SHEERVIDEO,
AV_CODEC_ID_YLC,
/* various PCM "codecs" */
AV_CODEC_ID_FIRST_AUDIO = 0x10000, ///< A dummy id pointing at the start of audio codecs
AV_CODEC_ID_PCM_S16LE = 0x10000,
AV_CODEC_ID_PCM_S16BE,
AV_CODEC_ID_PCM_U16LE,
AV_CODEC_ID_PCM_U16BE,
AV_CODEC_ID_PCM_S8,
AV_CODEC_ID_PCM_U8,
AV_CODEC_ID_PCM_MULAW,
AV_CODEC_ID_PCM_ALAW,
AV_CODEC_ID_PCM_S32LE,
AV_CODEC_ID_PCM_S32BE,
AV_CODEC_ID_PCM_U32LE,
AV_CODEC_ID_PCM_U32BE,
AV_CODEC_ID_PCM_S24LE,
AV_CODEC_ID_PCM_S24BE,
AV_CODEC_ID_PCM_U24LE,
AV_CODEC_ID_PCM_U24BE,
AV_CODEC_ID_PCM_S24DAUD,
AV_CODEC_ID_PCM_ZORK,
AV_CODEC_ID_PCM_S16LE_PLANAR,
AV_CODEC_ID_PCM_DVD,
AV_CODEC_ID_PCM_F32BE,
AV_CODEC_ID_PCM_F32LE,
AV_CODEC_ID_PCM_F64BE,
AV_CODEC_ID_PCM_F64LE,
AV_CODEC_ID_PCM_BLURAY,
AV_CODEC_ID_PCM_LXF,
AV_CODEC_ID_S302M,
AV_CODEC_ID_PCM_S8_PLANAR,
AV_CODEC_ID_PCM_S24LE_PLANAR,
AV_CODEC_ID_PCM_S32LE_PLANAR,
AV_CODEC_ID_PCM_S16BE_PLANAR,
AV_CODEC_ID_PCM_S64LE = 0x10800,
AV_CODEC_ID_PCM_S64BE,
/* various ADPCM codecs */
AV_CODEC_ID_ADPCM_IMA_QT = 0x11000,
AV_CODEC_ID_ADPCM_IMA_WAV,
AV_CODEC_ID_ADPCM_IMA_DK3,
AV_CODEC_ID_ADPCM_IMA_DK4,
AV_CODEC_ID_ADPCM_IMA_WS,
AV_CODEC_ID_ADPCM_IMA_SMJPEG,
AV_CODEC_ID_ADPCM_MS,
AV_CODEC_ID_ADPCM_4XM,
AV_CODEC_ID_ADPCM_XA,
AV_CODEC_ID_ADPCM_ADX,
AV_CODEC_ID_ADPCM_EA,
AV_CODEC_ID_ADPCM_G726,
AV_CODEC_ID_ADPCM_CT,
AV_CODEC_ID_ADPCM_SWF,
AV_CODEC_ID_ADPCM_YAMAHA,
AV_CODEC_ID_ADPCM_SBPRO_4,
AV_CODEC_ID_ADPCM_SBPRO_3,
AV_CODEC_ID_ADPCM_SBPRO_2,
AV_CODEC_ID_ADPCM_THP,
AV_CODEC_ID_ADPCM_IMA_AMV,
AV_CODEC_ID_ADPCM_EA_R1,
AV_CODEC_ID_ADPCM_EA_R3,
AV_CODEC_ID_ADPCM_EA_R2,
AV_CODEC_ID_ADPCM_IMA_EA_SEAD,
AV_CODEC_ID_ADPCM_IMA_EA_EACS,
AV_CODEC_ID_ADPCM_EA_XAS,
AV_CODEC_ID_ADPCM_EA_MAXIS_XA,
AV_CODEC_ID_ADPCM_IMA_ISS,
AV_CODEC_ID_ADPCM_G722,
AV_CODEC_ID_ADPCM_IMA_APC,
AV_CODEC_ID_ADPCM_VIMA,
#if FF_API_VIMA_DECODER
AV_CODEC_ID_VIMA = AV_CODEC_ID_ADPCM_VIMA,
#endif
AV_CODEC_ID_ADPCM_AFC = 0x11800,
AV_CODEC_ID_ADPCM_IMA_OKI,
AV_CODEC_ID_ADPCM_DTK,
AV_CODEC_ID_ADPCM_IMA_RAD,
AV_CODEC_ID_ADPCM_G726LE,
AV_CODEC_ID_ADPCM_THP_LE,
AV_CODEC_ID_ADPCM_PSX,
AV_CODEC_ID_ADPCM_AICA,
AV_CODEC_ID_ADPCM_IMA_DAT4,
AV_CODEC_ID_ADPCM_MTAF,
/* AMR */
AV_CODEC_ID_AMR_NB = 0x12000,
AV_CODEC_ID_AMR_WB,
/* RealAudio codecs*/
AV_CODEC_ID_RA_144 = 0x13000,
AV_CODEC_ID_RA_288,
/* various DPCM codecs */
AV_CODEC_ID_ROQ_DPCM = 0x14000,
AV_CODEC_ID_INTERPLAY_DPCM,
AV_CODEC_ID_XAN_DPCM,
AV_CODEC_ID_SOL_DPCM,
AV_CODEC_ID_SDX2_DPCM = 0x14800,
/* audio codecs */
AV_CODEC_ID_MP2 = 0x15000,
AV_CODEC_ID_MP3, ///< preferred ID for decoding MPEG audio layer 1, 2 or 3
AV_CODEC_ID_AAC,
AV_CODEC_ID_AC3,
AV_CODEC_ID_DTS,
AV_CODEC_ID_VORBIS,
AV_CODEC_ID_DVAUDIO,
AV_CODEC_ID_WMAV1,
AV_CODEC_ID_WMAV2,
AV_CODEC_ID_MACE3,
AV_CODEC_ID_MACE6,
AV_CODEC_ID_VMDAUDIO,
AV_CODEC_ID_FLAC,
AV_CODEC_ID_MP3ADU,
AV_CODEC_ID_MP3ON4,
AV_CODEC_ID_SHORTEN,
AV_CODEC_ID_ALAC,
AV_CODEC_ID_WESTWOOD_SND1,
AV_CODEC_ID_GSM, ///< as in Berlin toast format
AV_CODEC_ID_QDM2,
AV_CODEC_ID_COOK,
AV_CODEC_ID_TRUESPEECH,
AV_CODEC_ID_TTA,
AV_CODEC_ID_SMACKAUDIO,
AV_CODEC_ID_QCELP,
AV_CODEC_ID_WAVPACK,
AV_CODEC_ID_DSICINAUDIO,
AV_CODEC_ID_IMC,
AV_CODEC_ID_MUSEPACK7,
AV_CODEC_ID_MLP,
AV_CODEC_ID_GSM_MS, /* as found in WAV */
AV_CODEC_ID_ATRAC3,
#if FF_API_VOXWARE
AV_CODEC_ID_VOXWARE,
#endif
AV_CODEC_ID_APE,
AV_CODEC_ID_NELLYMOSER,
AV_CODEC_ID_MUSEPACK8,
AV_CODEC_ID_SPEEX,
AV_CODEC_ID_WMAVOICE,
AV_CODEC_ID_WMAPRO,
AV_CODEC_ID_WMALOSSLESS,
AV_CODEC_ID_ATRAC3P,
AV_CODEC_ID_EAC3,
AV_CODEC_ID_SIPR,
AV_CODEC_ID_MP1,
AV_CODEC_ID_TWINVQ,
AV_CODEC_ID_TRUEHD,
AV_CODEC_ID_MP4ALS,
AV_CODEC_ID_ATRAC1,
AV_CODEC_ID_BINKAUDIO_RDFT,
AV_CODEC_ID_BINKAUDIO_DCT,
AV_CODEC_ID_AAC_LATM,
AV_CODEC_ID_QDMC,
AV_CODEC_ID_CELT,
AV_CODEC_ID_G723_1,
AV_CODEC_ID_G729,
AV_CODEC_ID_8SVX_EXP,
AV_CODEC_ID_8SVX_FIB,
AV_CODEC_ID_BMV_AUDIO,
AV_CODEC_ID_RALF,
AV_CODEC_ID_IAC,
AV_CODEC_ID_ILBC,
AV_CODEC_ID_OPUS,
AV_CODEC_ID_COMFORT_NOISE,
AV_CODEC_ID_TAK,
AV_CODEC_ID_METASOUND,
AV_CODEC_ID_PAF_AUDIO,
AV_CODEC_ID_ON2AVC,
AV_CODEC_ID_DSS_SP,
AV_CODEC_ID_FFWAVESYNTH = 0x15800,
AV_CODEC_ID_SONIC,
AV_CODEC_ID_SONIC_LS,
AV_CODEC_ID_EVRC,
AV_CODEC_ID_SMV,
AV_CODEC_ID_DSD_LSBF,
AV_CODEC_ID_DSD_MSBF,
AV_CODEC_ID_DSD_LSBF_PLANAR,
AV_CODEC_ID_DSD_MSBF_PLANAR,
AV_CODEC_ID_4GV,
AV_CODEC_ID_INTERPLAY_ACM,
AV_CODEC_ID_XMA1,
AV_CODEC_ID_XMA2,
AV_CODEC_ID_DST,
/* subtitle codecs */
AV_CODEC_ID_FIRST_SUBTITLE = 0x17000, ///< A dummy ID pointing at the start of subtitle codecs.
AV_CODEC_ID_DVD_SUBTITLE = 0x17000,
AV_CODEC_ID_DVB_SUBTITLE,
AV_CODEC_ID_TEXT, ///< raw UTF-8 text
AV_CODEC_ID_XSUB,
AV_CODEC_ID_SSA,
AV_CODEC_ID_MOV_TEXT,
AV_CODEC_ID_HDMV_PGS_SUBTITLE,
AV_CODEC_ID_DVB_TELETEXT,
AV_CODEC_ID_SRT,
AV_CODEC_ID_MICRODVD = 0x17800,
AV_CODEC_ID_EIA_608,
AV_CODEC_ID_JACOSUB,
AV_CODEC_ID_SAMI,
AV_CODEC_ID_REALTEXT,
AV_CODEC_ID_STL,
AV_CODEC_ID_SUBVIEWER1,
AV_CODEC_ID_SUBVIEWER,
AV_CODEC_ID_SUBRIP,
AV_CODEC_ID_WEBVTT,
AV_CODEC_ID_MPL2,
AV_CODEC_ID_VPLAYER,
AV_CODEC_ID_PJS,
AV_CODEC_ID_ASS,
AV_CODEC_ID_HDMV_TEXT_SUBTITLE,
/* other specific kind of codecs (generally used for attachments) */
AV_CODEC_ID_FIRST_UNKNOWN = 0x18000, ///< A dummy ID pointing at the start of various fake codecs.
AV_CODEC_ID_TTF = 0x18000,
AV_CODEC_ID_SCTE_35, ///< Contain timestamp estimated through PCR of program stream.
AV_CODEC_ID_BINTEXT = 0x18800,
AV_CODEC_ID_XBIN,
AV_CODEC_ID_IDF,
AV_CODEC_ID_OTF,
AV_CODEC_ID_SMPTE_KLV,
AV_CODEC_ID_DVD_NAV,
AV_CODEC_ID_TIMED_ID3,
AV_CODEC_ID_BIN_DATA,
AV_CODEC_ID_PROBE = 0x19000, ///< codec_id is not known (like AV_CODEC_ID_NONE) but lavf should attempt to identify it
AV_CODEC_ID_MPEG2TS = 0x20000, /**< _FAKE_ codec to indicate a raw MPEG-2 TS
* stream (only used by libavformat) */
AV_CODEC_ID_MPEG4SYSTEMS = 0x20001, /**< _FAKE_ codec to indicate a MPEG-4 Systems
* stream (only used by libavformat) */
AV_CODEC_ID_FFMETADATA = 0x21000, ///< Dummy codec for streams containing only metadata information.
AV_CODEC_ID_WRAPPED_AVFRAME = 0x21001, ///< Passthrough codec, AVFrames wrapped in AVPacket
};AVPacket :
/**
* This structure stores compressed data. It is typically exported by demuxers
* and then passed as input to decoders, or received as output from encoders and
* then passed to muxers.
*
* For video, it should typically contain one compressed frame. For audio it may
* contain several compressed frames. Encoders are allowed to output empty
* packets, with no compressed data, containing only side data
* (e.g. to update some stream parameters at the end of encoding).
*
* AVPacket is one of the few structs in FFmpeg, whose size is a part of public
* ABI. Thus it may be allocated on stack and no new fields can be added to it
* without libavcodec and libavformat major bump.
*
* The semantics of data ownership depends on the buf field.
* If it is set, the packet data is dynamically allocated and is
* valid indefinitely until a call to av_packet_unref() reduces the
* reference count to 0.
*
* If the buf field is not set av_packet_ref() would make a copy instead
* of increasing the reference count.
*
* The side data is always allocated with av_malloc(), copied by
* av_packet_ref() and freed by av_packet_unref().
*
* @see av_packet_ref
* @see av_packet_unref
*/
typedef struct AVPacket {
/**
* A reference to the reference-counted buffer where the packet data is
* stored.
* May be NULL, then the packet data is not reference-counted.
*/
AVBufferRef *buf;
/**
* Presentation timestamp in AVStream->time_base units; the time at which
* the decompressed packet will be presented to the user.
* Can be AV_NOPTS_VALUE if it is not stored in the file.
* pts MUST be larger or equal to dts as presentation cannot happen before
* decompression, unless one wants to view hex dumps. Some formats misuse
* the terms dts and pts/cts to mean something different. Such timestamps
* must be converted to true pts/dts before they are stored in AVPacket.
*/
int64_t pts;
/**
* Decompression timestamp in AVStream->time_base units; the time at which
* the packet is decompressed.
* Can be AV_NOPTS_VALUE if it is not stored in the file.
*/
int64_t dts;
uint8_t *data;
int size;
int stream_index;
/**
* A combination of AV_PKT_FLAG values
*/
int flags;
/**
* Additional packet data that can be provided by the container.
* Packet can contain several types of side information.
*/
AVPacketSideData *side_data;
int side_data_elems;
/**
* Duration of this packet in AVStream->time_base units, 0 if unknown.
* Equals next_pts - this_pts in presentation order.
*/
int64_t duration;
int64_t pos; ///< byte position in stream, -1 if unknown
#if FF_API_CONVERGENCE_DURATION
/**
* @deprecated Same as the duration field, but as int64_t. This was required
* for Matroska subtitles, whose duration values could overflow when the
* duration field was still an int.
*/
attribute_deprecated
int64_t convergence_duration;
#endif
} AVPacket;AVCodecContext:
/**
* main external API structure.
* New fields can be added to the end with minor version bumps.
* Removal, reordering and changes to existing fields require a major
* version bump.
* Please use AVOptions (av_opt* / av_set/get*()) to access these fields from user
* applications.
* The name string for AVOptions options matches the associated command line
* parameter name and can be found in libavcodec/options_table.h
* The AVOption/command line parameter names differ in some cases from the C
* structure field names for historic reasons or brevity.
* sizeof(AVCodecContext) must not be used outside libav*.
*/
typedef struct AVCodecContext {
/**
* information on struct for av_log
* - set by avcodec_alloc_context3
*/
const AVClass *av_class;
int log_level_offset;
enum AVMediaType codec_type; /* see AVMEDIA_TYPE_xxx */
const struct AVCodec *codec;
#if FF_API_CODEC_NAME
/**
* @deprecated this field is not used for anything in libavcodec
*/
attribute_deprecated
char codec_name[32];
#endif
enum AVCodecID codec_id; /* see AV_CODEC_ID_xxx */
/**
* fourcc (LSB first, so "ABCD" -> ('D'<<24) + ('C'<<16) + ('B'<<8) + 'A').
* This is used to work around some encoder bugs.
* A demuxer should set this to what is stored in the field used to identify the codec.
* If there are multiple such fields in a container then the demuxer should choose the one
* which maximizes the information about the used codec.
* If the codec tag field in a container is larger than 32 bits then the demuxer should
* remap the longer ID to 32 bits with a table or other structure. Alternatively a new
* extra_codec_tag + size could be added but for this a clear advantage must be demonstrated
* first.
* - encoding: Set by user, if not then the default based on codec_id will be used.
* - decoding: Set by user, will be converted to uppercase by libavcodec during init.
*/
unsigned int codec_tag;
#if FF_API_STREAM_CODEC_TAG
/**
* @deprecated this field is unused
*/
attribute_deprecated
unsigned int stream_codec_tag;
#endif
void *priv_data;
/**
* Private context used for internal data.
*
* Unlike priv_data, this is not codec-specific. It is used in general
* libavcodec functions.
*/
struct AVCodecInternal *internal;
/**
* Private data of the user, can be used to carry app specific stuff.
* - encoding: Set by user.
* - decoding: Set by user.
*/
void *opaque;
/**
* the average bitrate
* - encoding: Set by user; unused for constant quantizer encoding.
* - decoding: Set by user, may be overwritten by libavcodec
* if this info is available in the stream
*/
int64_t bit_rate;
/**
* number of bits the bitstream is allowed to diverge from the reference.
* the reference can be CBR (for CBR pass1) or VBR (for pass2)
* - encoding: Set by user; unused for constant quantizer encoding.
* - decoding: unused
*/
int bit_rate_tolerance;
/**
* Global quality for codecs which cannot change it per frame.
* This should be proportional to MPEG-1/2/4 qscale.
* - encoding: Set by user.
* - decoding: unused
*/
int global_quality;
/**
* - encoding: Set by user.
* - decoding: unused
*/
int compression_level;
#define FF_COMPRESSION_DEFAULT -1
/**
* AV_CODEC_FLAG_*.
* - encoding: Set by user.
* - decoding: Set by user.
*/
int flags;
/**
* AV_CODEC_FLAG2_*
* - encoding: Set by user.
* - decoding: Set by user.
*/
int flags2;
/**
* some codecs need / can use extradata like Huffman tables.
* MJPEG: Huffman tables
* rv10: additional flags
* MPEG-4: global headers (they can be in the bitstream or here)
* The allocated memory should be AV_INPUT_BUFFER_PADDING_SIZE bytes larger
* than extradata_size to avoid problems if it is read with the bitstream reader.
* The bytewise contents of extradata must not depend on the architecture or CPU endianness.
* - encoding: Set/allocated/freed by libavcodec.
* - decoding: Set/allocated/freed by user.
*/
uint8_t *extradata;
int extradata_size;
/**
* This is the fundamental unit of time (in seconds) in terms
* of which frame timestamps are represented. For fixed-fps content,
* timebase should be 1/framerate and timestamp increments should be
* identically 1.
* This often, but not always is the inverse of the frame rate or field rate
* for video. 1/time_base is not the average frame rate if the frame rate is not
* constant.
*
* Like containers, elementary streams also can store timestamps, 1/time_base
* is the unit in which these timestamps are specified.
* As example of such codec time base see ISO/IEC 14496-2:2001(E)
* vop_time_increment_resolution and fixed_vop_rate
* (fixed_vop_rate == 0 implies that it is different from the framerate)
*
* - encoding: MUST be set by user.
* - decoding: the use of this field for decoding is deprecated.
* Use framerate instead.
*/
AVRational time_base;
/**
* For some codecs, the time base is closer to the field rate than the frame rate.
* Most notably, H.264 and MPEG-2 specify time_base as half of frame duration
* if no telecine is used ...
*
* Set to time_base ticks per frame. Default 1, e.g., H.264/MPEG-2 set it to 2.
*/
int ticks_per_frame;
/**
* Codec delay.
*
* Encoding: Number of frames delay there will be from the encoder input to
* the decoder output. (we assume the decoder matches the spec)
* Decoding: Number of frames delay in addition to what a standard decoder
* as specified in the spec would produce.
*
* Video:
* Number of frames the decoded output will be delayed relative to the
* encoded input.
*
* Audio:
* For encoding, this field is unused (see initial_padding).
*
* For decoding, this is the number of samples the decoder needs to
* output before the decoder's output is valid. When seeking, you should
* start decoding this many samples prior to your desired seek point.
*
* - encoding: Set by libavcodec.
* - decoding: Set by libavcodec.
*/
int delay;
/* video only */
/**
* picture width / height.
*
* @note Those fields may not match the values of the last
* AVFrame output by avcodec_decode_video2 due frame
* reordering.
*
* - encoding: MUST be set by user.
* - decoding: May be set by the user before opening the decoder if known e.g.
* from the container. Some decoders will require the dimensions
* to be set by the caller. During decoding, the decoder may
* overwrite those values as required while parsing the data.
*/
int width, height;
/**
* Bitstream width / height, may be different from width/height e.g. when
* the decoded frame is cropped before being output or lowres is enabled.
*
* @note Those field may not match the value of the last
* AVFrame output by avcodec_receive_frame() due frame
* reordering.
*
* - encoding: unused
* - decoding: May be set by the user before opening the decoder if known
* e.g. from the container. During decoding, the decoder may
* overwrite those values as required while parsing the data.
*/
int coded_width, coded_height;
#if FF_API_ASPECT_EXTENDED
#define FF_ASPECT_EXTENDED 15
#endif
/**
* the number of pictures in a group of pictures, or 0 for intra_only
* - encoding: Set by user.
* - decoding: unused
*/
int gop_size;
/**
* Pixel format, see AV_PIX_FMT_xxx.
* May be set by the demuxer if known from headers.
* May be overridden by the decoder if it knows better.
*
* @note This field may not match the value of the last
* AVFrame output by avcodec_receive_frame() due frame
* reordering.
*
* - encoding: Set by user.
* - decoding: Set by user if known, overridden by libavcodec while
* parsing the data.
*/
enum AVPixelFormat pix_fmt;
#if FF_API_MOTION_EST
/**
* This option does nothing
* @deprecated use codec private options instead
*/
attribute_deprecated int me_method;
#endif
/**
* If non NULL, 'draw_horiz_band' is called by the libavcodec
* decoder to draw a horizontal band. It improves cache usage. Not
* all codecs can do that. You must check the codec capabilities
* beforehand.
* When multithreading is used, it may be called from multiple threads
* at the same time; threads might draw different parts of the same AVFrame,
* or multiple AVFrames, and there is no guarantee that slices will be drawn
* in order.
* The function is also used by hardware acceleration APIs.
* It is called at least once during frame decoding to pass
* the data needed for hardware render.
* In that mode instead of pixel data, AVFrame points to
* a structure specific to the acceleration API. The application
* reads the structure and can change some fields to indicate progress
* or mark state.
* - encoding: unused
* - decoding: Set by user.
* @param height the height of the slice
* @param y the y position of the slice
* @param type 1->top field, 2->bottom field, 3->frame
* @param offset offset into the AVFrame.data from which the slice should be read
*/
void (*draw_horiz_band)(struct AVCodecContext *s,
const AVFrame *src, int offset[AV_NUM_DATA_POINTERS],
int y, int type, int height);
/**
* callback to negotiate the pixelFormat
* @param fmt is the list of formats which are supported by the codec,
* it is terminated by -1 as 0 is a valid format, the formats are ordered by quality.
* The first is always the native one.
* @note The callback may be called again immediately if initialization for
* the selected (hardware-accelerated) pixel format failed.
* @warning Behavior is undefined if the callback returns a value not
* in the fmt list of formats.
* @return the chosen format
* - encoding: unused
* - decoding: Set by user, if not set the native format will be chosen.
*/
enum AVPixelFormat (*get_format)(struct AVCodecContext *s, const enum AVPixelFormat * fmt);
/**
* maximum number of B-frames between non-B-frames
* Note: The output will be delayed by max_b_frames+1 relative to the input.
* - encoding: Set by user.
* - decoding: unused
*/
int max_b_frames;
/**
* qscale factor between IP and B-frames
* If > 0 then the last P-frame quantizer will be used (q= lastp_q*factor+offset).
* If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset).
* - encoding: Set by user.
* - decoding: unused
*/
float b_quant_factor;
#if FF_API_RC_STRATEGY
/** @deprecated use codec private option instead */
attribute_deprecated int rc_strategy;
#define FF_RC_STRATEGY_XVID 1
#endif
#if FF_API_PRIVATE_OPT
/** @deprecated use encoder private options instead */
attribute_deprecated
int b_frame_strategy;
#endif
/**
* qscale offset between IP and B-frames
* - encoding: Set by user.
* - decoding: unused
*/
float b_quant_offset;
/**
* Size of the frame reordering buffer in the decoder.
* For MPEG-2 it is 1 IPB or 0 low delay IP.
* - encoding: Set by libavcodec.
* - decoding: Set by libavcodec.
*/
int has_b_frames;
#if FF_API_PRIVATE_OPT
/** @deprecated use encoder private options instead */
attribute_deprecated
int mpeg_quant;
#endif
/**
* qscale factor between P- and I-frames
* If > 0 then the last P-frame quantizer will be used (q = lastp_q * factor + offset).
* If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset).
* - encoding: Set by user.
* - decoding: unused
*/
float i_quant_factor;
/**
* qscale offset between P and I-frames
* - encoding: Set by user.
* - decoding: unused
*/
float i_quant_offset;
/**
* luminance masking (0-> disabled)
* - encoding: Set by user.
* - decoding: unused
*/
float lumi_masking;
/**
* temporary complexity masking (0-> disabled)
* - encoding: Set by user.
* - decoding: unused
*/
float temporal_cplx_masking;
/**
* spatial complexity masking (0-> disabled)
* - encoding: Set by user.
* - decoding: unused
*/
float spatial_cplx_masking;
/**
* p block masking (0-> disabled)
* - encoding: Set by user.
* - decoding: unused
*/
float p_masking;
/**
* darkness masking (0-> disabled)
* - encoding: Set by user.
* - decoding: unused
*/
float dark_masking;
/**
* slice count
* - encoding: Set by libavcodec.
* - decoding: Set by user (or 0).
*/
int slice_count;
#if FF_API_PRIVATE_OPT
/** @deprecated use encoder private options instead */
attribute_deprecated
int prediction_method;
#define FF_PRED_LEFT 0
#define FF_PRED_PLANE 1
#define FF_PRED_MEDIAN 2
#endif
/**
* slice offsets in the frame in bytes
* - encoding: Set/allocated by libavcodec.
* - decoding: Set/allocated by user (or NULL).
*/
int *slice_offset;
/**
* sample aspect ratio (0 if unknown)
* That is the width of a pixel divided by the height of the pixel.
* Numerator and denominator must be relatively prime and smaller than 256 for some video standards.
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
AVRational sample_aspect_ratio;
/**
* motion estimation comparison function
* - encoding: Set by user.
* - decoding: unused
*/
int me_cmp;
/**
* subpixel motion estimation comparison function
* - encoding: Set by user.
* - decoding: unused
*/
int me_sub_cmp;
/**
* macroblock comparison function (not supported yet)
* - encoding: Set by user.
* - decoding: unused
*/
int mb_cmp;
/**
* interlaced DCT comparison function
* - encoding: Set by user.
* - decoding: unused
*/
int ildct_cmp;
#define FF_CMP_SAD 0
#define FF_CMP_SSE 1
#define FF_CMP_SATD 2
#define FF_CMP_DCT 3
#define FF_CMP_PSNR 4
#define FF_CMP_BIT 5
#define FF_CMP_RD 6
#define FF_CMP_ZERO 7
#define FF_CMP_VSAD 8
#define FF_CMP_VSSE 9
#define FF_CMP_NSSE 10
#define FF_CMP_W53 11
#define FF_CMP_W97 12
#define FF_CMP_DCTMAX 13
#define FF_CMP_DCT264 14
#define FF_CMP_MEDIAN_SAD 15
#define FF_CMP_CHROMA 256
/**
* ME diamond size & shape
* - encoding: Set by user.
* - decoding: unused
*/
int dia_size;
/**
* amount of previous MV predictors (2a+1 x 2a+1 square)
* - encoding: Set by user.
* - decoding: unused
*/
int last_predictor_count;
#if FF_API_PRIVATE_OPT
/** @deprecated use encoder private options instead */
attribute_deprecated
int pre_me;
#endif
/**
* motion estimation prepass comparison function
* - encoding: Set by user.
* - decoding: unused
*/
int me_pre_cmp;
/**
* ME prepass diamond size & shape
* - encoding: Set by user.
* - decoding: unused
*/
int pre_dia_size;
/**
* subpel ME quality
* - encoding: Set by user.
* - decoding: unused
*/
int me_subpel_quality;
#if FF_API_AFD
/**
* DTG active format information (additional aspect ratio
* information only used in DVB MPEG-2 transport streams)
* 0 if not set.
*
* - encoding: unused
* - decoding: Set by decoder.
* @deprecated Deprecated in favor of AVSideData
*/
attribute_deprecated int dtg_active_format;
#define FF_DTG_AFD_SAME 8
#define FF_DTG_AFD_4_3 9
#define FF_DTG_AFD_16_9 10
#define FF_DTG_AFD_14_9 11
#define FF_DTG_AFD_4_3_SP_14_9 13
#define FF_DTG_AFD_16_9_SP_14_9 14
#define FF_DTG_AFD_SP_4_3 15
#endif /* FF_API_AFD */
/**
* maximum motion estimation search range in subpel units
* If 0 then no limit.
*
* - encoding: Set by user.
* - decoding: unused
*/
int me_range;
#if FF_API_QUANT_BIAS
/**
* @deprecated use encoder private option instead
*/
attribute_deprecated int intra_quant_bias;
#define FF_DEFAULT_QUANT_BIAS 999999
/**
* @deprecated use encoder private option instead
*/
attribute_deprecated int inter_quant_bias;
#endif
/**
* slice flags
* - encoding: unused
* - decoding: Set by user.
*/
int slice_flags;
#define SLICE_FLAG_CODED_ORDER 0x0001 ///< draw_horiz_band() is called in coded order instead of display
#define SLICE_FLAG_ALLOW_FIELD 0x0002 ///< allow draw_horiz_band() with field slices (MPEG-2 field pics)
#define SLICE_FLAG_ALLOW_PLANE 0x0004 ///< allow draw_horiz_band() with 1 component at a time (SVQ1)
#if FF_API_XVMC
/**
* XVideo Motion Acceleration
* - encoding: forbidden
* - decoding: set by decoder
* @deprecated XvMC doesn't need it anymore.
*/
attribute_deprecated int xvmc_acceleration;
#endif /* FF_API_XVMC */
/**
* macroblock decision mode
* - encoding: Set by user.
* - decoding: unused
*/
int mb_decision;
#define FF_MB_DECISION_SIMPLE 0 ///< uses mb_cmp
#define FF_MB_DECISION_BITS 1 ///< chooses the one which needs the fewest bits
#define FF_MB_DECISION_RD 2 ///< rate distortion
/**
* custom intra quantization matrix
* - encoding: Set by user, can be NULL.
* - decoding: Set by libavcodec.
*/
uint16_t *intra_matrix;
/**
* custom inter quantization matrix
* - encoding: Set by user, can be NULL.
* - decoding: Set by libavcodec.
*/
uint16_t *inter_matrix;
#if FF_API_PRIVATE_OPT
/** @deprecated use encoder private options instead */
attribute_deprecated
int scenechange_threshold;
/** @deprecated use encoder private options instead */
attribute_deprecated
int noise_reduction;
#endif
#if FF_API_MPV_OPT
/**
* @deprecated this field is unused
*/
attribute_deprecated
int me_threshold;
/**
* @deprecated this field is unused
*/
attribute_deprecated
int mb_threshold;
#endif
/**
* precision of the intra DC coefficient - 8
* - encoding: Set by user.
* - decoding: Set by libavcodec
*/
int intra_dc_precision;
/**
* Number of macroblock rows at the top which are skipped.
* - encoding: unused
* - decoding: Set by user.
*/
int skip_top;
/**
* Number of macroblock rows at the bottom which are skipped.
* - encoding: unused
* - decoding: Set by user.
*/
int skip_bottom;
#if FF_API_MPV_OPT
/**
* @deprecated use encoder private options instead
*/
attribute_deprecated
float border_masking;
#endif
/**
* minimum MB Lagrange multiplier
* - encoding: Set by user.
* - decoding: unused
*/
int mb_lmin;
/**
* maximum MB Lagrange multiplier
* - encoding: Set by user.
* - decoding: unused
*/
int mb_lmax;
#if FF_API_PRIVATE_OPT
/**
* @deprecated use encoder private options instead
*/
attribute_deprecated
int me_penalty_compensation;
#endif
/**
* - encoding: Set by user.
* - decoding: unused
*/
int bidir_refine;
#if FF_API_PRIVATE_OPT
/** @deprecated use encoder private options instead */
attribute_deprecated
int brd_scale;
#endif
/**
* minimum GOP size
* - encoding: Set by user.
* - decoding: unused
*/
int keyint_min;
/**
* number of reference frames
* - encoding: Set by user.
* - decoding: Set by lavc.
*/
int refs;
#if FF_API_PRIVATE_OPT
/** @deprecated use encoder private options instead */
attribute_deprecated
int chromaoffset;
#endif
#if FF_API_UNUSED_MEMBERS
/**
* Multiplied by qscale for each frame and added to scene_change_score.
* - encoding: Set by user.
* - decoding: unused
*/
attribute_deprecated int scenechange_factor;
#endif
/**
* Note: Value depends upon the compare function used for fullpel ME.
* - encoding: Set by user.
* - decoding: unused
*/
int mv0_threshold;
#if FF_API_PRIVATE_OPT
/** @deprecated use encoder private options instead */
attribute_deprecated
int b_sensitivity;
#endif
/**
* Chromaticity coordinates of the source primaries.
* - encoding: Set by user
* - decoding: Set by libavcodec
*/
enum AVColorPrimaries color_primaries;
/**
* Color Transfer Characteristic.
* - encoding: Set by user
* - decoding: Set by libavcodec
*/
enum AVColorTransferCharacteristic color_trc;
/**
* YUV colorspace type.
* - encoding: Set by user
* - decoding: Set by libavcodec
*/
enum AVColorSpace colorspace;
/**
* MPEG vs JPEG YUV range.
* - encoding: Set by user
* - decoding: Set by libavcodec
*/
enum AVColorRange color_range;
/**
* This defines the location of chroma samples.
* - encoding: Set by user
* - decoding: Set by libavcodec
*/
enum AVChromaLocation chroma_sample_location;
/**
* Number of slices.
* Indicates number of picture subdivisions. Used for parallelized
* decoding.
* - encoding: Set by user
* - decoding: unused
*/
int slices;
/** Field order
* - encoding: set by libavcodec
* - decoding: Set by user.
*/
enum AVFieldOrder field_order;
/* audio only */
int sample_rate; ///< samples per second
int channels; ///< number of audio channels
/**
* audio sample format
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
enum AVSampleFormat sample_fmt; ///< sample format
/* The following data should not be initialized. */
/**
* Number of samples per channel in an audio frame.
*
* - encoding: set by libavcodec in avcodec_open2(). Each submitted frame
* except the last must contain exactly frame_size samples per channel.
* May be 0 when the codec has AV_CODEC_CAP_VARIABLE_FRAME_SIZE set, then the
* frame size is not restricted.
* - decoding: may be set by some decoders to indicate constant frame size
*/
int frame_size;
/**
* Frame counter, set by libavcodec.
*
* - decoding: total number of frames returned from the decoder so far.
* - encoding: total number of frames passed to the encoder so far.
*
* @note the counter is not incremented if encoding/decoding resulted in
* an error.
*/
int frame_number;
/**
* number of bytes per packet if constant and known or 0
* Used by some WAV based audio codecs.
*/
int block_align;
/**
* Audio cutoff bandwidth (0 means "automatic")
* - encoding: Set by user.
* - decoding: unused
*/
int cutoff;
/**
* Audio channel layout.
* - encoding: set by user.
* - decoding: set by user, may be overwritten by libavcodec.
*/
uint64_t channel_layout;
/**
* Request decoder to use this channel layout if it can (0 for default)
* - encoding: unused
* - decoding: Set by user.
*/
uint64_t request_channel_layout;
/**
* Type of service that the audio stream conveys.
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
enum AVAudioServiceType audio_service_type;
/**
* desired sample format
* - encoding: Not used.
* - decoding: Set by user.
* Decoder will decode to this format if it can.
*/
enum AVSampleFormat request_sample_fmt;
/**
* This callback is called at the beginning of each frame to get data
* buffer(s) for it. There may be one contiguous buffer for all the data or
* there may be a buffer per each data plane or anything in between. What
* this means is, you may set however many entries in buf[] you feel necessary.
* Each buffer must be reference-counted using the AVBuffer API (see description
* of buf[] below).
*
* The following fields will be set in the frame before this callback is
* called:
* - format
* - width, height (video only)
* - sample_rate, channel_layout, nb_samples (audio only)
* Their values may differ from the corresponding values in
* AVCodecContext. This callback must use the frame values, not the codec
* context values, to calculate the required buffer size.
*
* This callback must fill the following fields in the frame:
* - data[]
* - linesize[]
* - extended_data:
* * if the data is planar audio with more than 8 channels, then this
* callback must allocate and fill extended_data to contain all pointers
* to all data planes. data[] must hold as many pointers as it can.
* extended_data must be allocated with av_malloc() and will be freed in
* av_frame_unref().
* * otherwise extended_data must point to data
* - buf[] must contain one or more pointers to AVBufferRef structures. Each of
* the frame's data and extended_data pointers must be contained in these. That
* is, one AVBufferRef for each allocated chunk of memory, not necessarily one
* AVBufferRef per data[] entry. See: av_buffer_create(), av_buffer_alloc(),
* and av_buffer_ref().
* - extended_buf and nb_extended_buf must be allocated with av_malloc() by
* this callback and filled with the extra buffers if there are more
* buffers than buf[] can hold. extended_buf will be freed in
* av_frame_unref().
*
* If AV_CODEC_CAP_DR1 is not set then get_buffer2() must call
* avcodec_default_get_buffer2() instead of providing buffers allocated by
* some other means.
*
* Each data plane must be aligned to the maximum required by the target
* CPU.
*
* @see avcodec_default_get_buffer2()
*
* Video:
*
* If AV_GET_BUFFER_FLAG_REF is set in flags then the frame may be reused
* (read and/or written to if it is writable) later by libavcodec.
*
* avcodec_align_dimensions2() should be used to find the required width and
* height, as they normally need to be rounded up to the next multiple of 16.
*
* Some decoders do not support linesizes changing between frames.
*
* If frame multithreading is used and thread_safe_callbacks is set,
* this callback may be called from a different thread, but not from more
* than one at once. Does not need to be reentrant.
*
* @see avcodec_align_dimensions2()
*
* Audio:
*
* Decoders request a buffer of a particular size by setting
* AVFrame.nb_samples prior to calling get_buffer2(). The decoder may,
* however, utilize only part of the buffer by setting AVFrame.nb_samples
* to a smaller value in the output frame.
*
* As a convenience, av_samples_get_buffer_size() and
* av_samples_fill_arrays() in libavutil may be used by custom get_buffer2()
* functions to find the required data size and to fill data pointers and
* linesize. In AVFrame.linesize, only linesize[0] may be set for audio
* since all planes must be the same size.
*
* @see av_samples_get_buffer_size(), av_samples_fill_arrays()
*
* - encoding: unused
* - decoding: Set by libavcodec, user can override.
*/
int (*get_buffer2)(struct AVCodecContext *s, AVFrame *frame, int flags);
/**
* If non-zero, the decoded audio and video frames returned from
* avcodec_decode_video2() and avcodec_decode_audio4() are reference-counted
* and are valid indefinitely. The caller must free them with
* av_frame_unref() when they are not needed anymore.
* Otherwise, the decoded frames must not be freed by the caller and are
* only valid until the next decode call.
*
* This is always automatically enabled if avcodec_receive_frame() is used.
*
* - encoding: unused
* - decoding: set by the caller before avcodec_open2().
*/
int refcounted_frames;
/* - encoding parameters */
float qcompress; ///< amount of qscale change between easy & hard scenes (0.0-1.0)
float qblur; ///< amount of qscale smoothing over time (0.0-1.0)
/**
* minimum quantizer
* - encoding: Set by user.
* - decoding: unused
*/
int qmin;
/**
* maximum quantizer
* - encoding: Set by user.
* - decoding: unused
*/
int qmax;
/**
* maximum quantizer difference between frames
* - encoding: Set by user.
* - decoding: unused
*/
int max_qdiff;
#if FF_API_MPV_OPT
/**
* @deprecated use encoder private options instead
*/
attribute_deprecated
float rc_qsquish;
attribute_deprecated
float rc_qmod_amp;
attribute_deprecated
int rc_qmod_freq;
#endif
/**
* decoder bitstream buffer size
* - encoding: Set by user.
* - decoding: unused
*/
int rc_buffer_size;
/**
* ratecontrol override, see RcOverride
* - encoding: Allocated/set/freed by user.
* - decoding: unused
*/
int rc_override_count;
RcOverride *rc_override;
#if FF_API_MPV_OPT
/**
* @deprecated use encoder private options instead
*/
attribute_deprecated
const char *rc_eq;
#endif
/**
* maximum bitrate
* - encoding: Set by user.
* - decoding: Set by user, may be overwritten by libavcodec.
*/
int64_t rc_max_rate;
/**
* minimum bitrate
* - encoding: Set by user.
* - decoding: unused
*/
int64_t rc_min_rate;
#if FF_API_MPV_OPT
/**
* @deprecated use encoder private options instead
*/
attribute_deprecated
float rc_buffer_aggressivity;
attribute_deprecated
float rc_initial_cplx;
#endif
/**
* Ratecontrol attempt to use, at maximum, of what can be used without an underflow.
* - encoding: Set by user.
* - decoding: unused.
*/
float rc_max_available_vbv_use;
/**
* Ratecontrol attempt to use, at least, times the amount needed to prevent a vbv overflow.
* - encoding: Set by user.
* - decoding: unused.
*/
float rc_min_vbv_overflow_use;
/**
* Number of bits which should be loaded into the rc buffer before decoding starts.
* - encoding: Set by user.
* - decoding: unused
*/
int rc_initial_buffer_occupancy;
#if FF_API_CODER_TYPE
#define FF_CODER_TYPE_VLC 0
#define FF_CODER_TYPE_AC 1
#define FF_CODER_TYPE_RAW 2
#define FF_CODER_TYPE_RLE 3
#if FF_API_UNUSED_MEMBERS
#define FF_CODER_TYPE_DEFLATE 4
#endif /* FF_API_UNUSED_MEMBERS */
/**
* @deprecated use encoder private options instead
*/
attribute_deprecated
int coder_type;
#endif /* FF_API_CODER_TYPE */
#if FF_API_PRIVATE_OPT
/** @deprecated use encoder private options instead */
attribute_deprecated
int context_model;
#endif
#if FF_API_MPV_OPT
/**
* @deprecated use encoder private options instead
*/
attribute_deprecated
int lmin;
/**
* @deprecated use encoder private options instead
*/
attribute_deprecated
int lmax;
#endif
#if FF_API_PRIVATE_OPT
/** @deprecated use encoder private options instead */
attribute_deprecated
int frame_skip_threshold;
/** @deprecated use encoder private options instead */
attribute_deprecated
int frame_skip_factor;
/** @deprecated use encoder private options instead */
attribute_deprecated
int frame_skip_exp;
/** @deprecated use encoder private options instead */
attribute_deprecated
int frame_skip_cmp;
#endif /* FF_API_PRIVATE_OPT */
/**
* trellis RD quantization
* - encoding: Set by user.
* - decoding: unused
*/
int trellis;
#if FF_API_PRIVATE_OPT
/** @deprecated use encoder private options instead */
attribute_deprecated
int min_prediction_order;
/** @deprecated use encoder private options instead */
attribute_deprecated
int max_prediction_order;
/** @deprecated use encoder private options instead */
attribute_deprecated
int64_t timecode_frame_start;
#endif
#if FF_API_RTP_CALLBACK
/**
* @deprecated unused
*/
/* The RTP callback: This function is called */
/* every time the encoder has a packet to send. */
/* It depends on the encoder if the data starts */
/* with a Start Code (it should). H.263 does. */
/* mb_nb contains the number of macroblocks */
/* encoded in the RTP payload. */
attribute_deprecated
void (*rtp_callback)(struct AVCodecContext *avctx, void *data, int size, int mb_nb);
#endif
#if FF_API_PRIVATE_OPT
/** @deprecated use encoder private options instead */
attribute_deprecated
int rtp_payload_size; /* The size of the RTP payload: the coder will */
/* do its best to deliver a chunk with size */
/* below rtp_payload_size, the chunk will start */
/* with a start code on some codecs like H.263. */
/* This doesn't take account of any particular */
/* headers inside the transmitted RTP payload. */
#endif
#if FF_API_STAT_BITS
/* statistics, used for 2-pass encoding */
attribute_deprecated
int mv_bits;
attribute_deprecated
int header_bits;
attribute_deprecated
int i_tex_bits;
attribute_deprecated
int p_tex_bits;
attribute_deprecated
int i_count;
attribute_deprecated
int p_count;
attribute_deprecated
int skip_count;
attribute_deprecated
int misc_bits;
/** @deprecated this field is unused */
attribute_deprecated
int frame_bits;
#endif
/**
* pass1 encoding statistics output buffer
* - encoding: Set by libavcodec.
* - decoding: unused
*/
char *stats_out;
/**
* pass2 encoding statistics input buffer
* Concatenated stuff from stats_out of pass1 should be placed here.
* - encoding: Allocated/set/freed by user.
* - decoding: unused
*/
char *stats_in;
/**
* Work around bugs in encoders which sometimes cannot be detected automatically.
* - encoding: Set by user
* - decoding: Set by user
*/
int workaround_bugs;
#define FF_BUG_AUTODETECT 1 ///< autodetection
#if FF_API_OLD_MSMPEG4
#define FF_BUG_OLD_MSMPEG4 2
#endif
#define FF_BUG_XVID_ILACE 4
#define FF_BUG_UMP4 8
#define FF_BUG_NO_PADDING 16
#define FF_BUG_AMV 32
#if FF_API_AC_VLC
#define FF_BUG_AC_VLC 0 ///< Will be removed, libavcodec can now handle these non-compliant files by default.
#endif
#define FF_BUG_QPEL_CHROMA 64
#define FF_BUG_STD_QPEL 128
#define FF_BUG_QPEL_CHROMA2 256
#define FF_BUG_DIRECT_BLOCKSIZE 512
#define FF_BUG_EDGE 1024
#define FF_BUG_HPEL_CHROMA 2048
#define FF_BUG_DC_CLIP 4096
#define FF_BUG_MS 8192 ///< Work around various bugs in Microsoft's broken decoders.
#define FF_BUG_TRUNCATED 16384
/**
* strictly follow the standard (MPEG-4, ...).
* - encoding: Set by user.
* - decoding: Set by user.
* Setting this to STRICT or higher means the encoder and decoder will
* generally do stupid things, whereas setting it to unofficial or lower
* will mean the encoder might produce output that is not supported by all
* spec-compliant decoders. Decoders don't differentiate between normal,
* unofficial and experimental (that is, they always try to decode things
* when they can) unless they are explicitly asked to behave stupidly
* (=strictly conform to the specs)
*/
int strict_std_compliance;
#define FF_COMPLIANCE_VERY_STRICT 2 ///< Strictly conform to an older more strict version of the spec or reference software.
#define FF_COMPLIANCE_STRICT 1 ///< Strictly conform to all the things in the spec no matter what consequences.
#define FF_COMPLIANCE_NORMAL 0
#define FF_COMPLIANCE_UNOFFICIAL -1 ///< Allow unofficial extensions
#define FF_COMPLIANCE_EXPERIMENTAL -2 ///< Allow nonstandardized experimental things.
/**
* error concealment flags
* - encoding: unused
* - decoding: Set by user.
*/
int error_concealment;
#define FF_EC_GUESS_MVS 1
#define FF_EC_DEBLOCK 2
#define FF_EC_FAVOR_INTER 256
/**
* debug
* - encoding: Set by user.
* - decoding: Set by user.
*/
int debug;
#define FF_DEBUG_PICT_INFO 1
#define FF_DEBUG_RC 2
#define FF_DEBUG_BITSTREAM 4
#define FF_DEBUG_MB_TYPE 8
#define FF_DEBUG_QP 16
#if FF_API_DEBUG_MV
/**
* @deprecated this option does nothing
*/
#define FF_DEBUG_MV 32
#endif
#define FF_DEBUG_DCT_COEFF 0x00000040
#define FF_DEBUG_SKIP 0x00000080
#define FF_DEBUG_STARTCODE 0x00000100
#if FF_API_UNUSED_MEMBERS
#define FF_DEBUG_PTS 0x00000200
#endif /* FF_API_UNUSED_MEMBERS */
#define FF_DEBUG_ER 0x00000400
#define FF_DEBUG_MMCO 0x00000800
#define FF_DEBUG_BUGS 0x00001000
#if FF_API_DEBUG_MV
#define FF_DEBUG_VIS_QP 0x00002000 ///< only access through AVOptions from outside libavcodec
#define FF_DEBUG_VIS_MB_TYPE 0x00004000 ///< only access through AVOptions from outside libavcodec
#endif
#define FF_DEBUG_BUFFERS 0x00008000
#define FF_DEBUG_THREADS 0x00010000
#define FF_DEBUG_GREEN_MD 0x00800000
#define FF_DEBUG_NOMC 0x01000000
#if FF_API_DEBUG_MV
/**
* debug
* Code outside libavcodec should access this field using AVOptions
* - encoding: Set by user.
* - decoding: Set by user.
*/
int debug_mv;
#define FF_DEBUG_VIS_MV_P_FOR 0x00000001 // visualize forward predicted MVs of P-frames
#define FF_DEBUG_VIS_MV_B_FOR 0x00000002 // visualize forward predicted MVs of B-frames
#define FF_DEBUG_VIS_MV_B_BACK 0x00000004 // visualize backward predicted MVs of B-frames
#endif
/**
* Error recognition; may misdetect some more or less valid parts as errors.
* - encoding: unused
* - decoding: Set by user.
*/
int err_recognition;
/**
* Verify checksums embedded in the bitstream (could be of either encoded or
* decoded data, depending on the codec) and print an error message on mismatch.
* If AV_EF_EXPLODE is also set, a mismatching checksum will result in the
* decoder returning an error.
*/
#define AV_EF_CRCCHECK (1<<0)
#define AV_EF_BITSTREAM (1<<1) ///< detect bitstream specification deviations
#define AV_EF_BUFFER (1<<2) ///< detect improper bitstream length
#define AV_EF_EXPLODE (1<<3) ///< abort decoding on minor error detection
#define AV_EF_IGNORE_ERR (1<<15) ///< ignore errors and continue
#define AV_EF_CAREFUL (1<<16) ///< consider things that violate the spec, are fast to calculate and have not been seen in the wild as errors
#define AV_EF_COMPLIANT (1<<17) ///< consider all spec non compliances as errors
#define AV_EF_AGGRESSIVE (1<<18) ///< consider things that a sane encoder should not do as an error
/**
* opaque 64-bit number (generally a PTS) that will be reordered and
* output in AVFrame.reordered_opaque
* - encoding: unused
* - decoding: Set by user.
*/
int64_t reordered_opaque;
/**
* Hardware accelerator in use
* - encoding: unused.
* - decoding: Set by libavcodec
*/
struct AVHWAccel *hwaccel;
/**
* Hardware accelerator context.
* For some hardware accelerators, a global context needs to be
* provided by the user. In that case, this holds display-dependent
* data FFmpeg cannot instantiate itself. Please refer to the
* FFmpeg HW accelerator documentation to know how to fill this
* is. e.g. for VA API, this is a struct vaapi_context.
* - encoding: unused
* - decoding: Set by user
*/
void *hwaccel_context;
/**
* error
* - encoding: Set by libavcodec if flags & AV_CODEC_FLAG_PSNR.
* - decoding: unused
*/
uint64_t error[AV_NUM_DATA_POINTERS];
/**
* DCT algorithm, see FF_DCT_* below
* - encoding: Set by user.
* - decoding: unused
*/
int dct_algo;
#define FF_DCT_AUTO 0
#define FF_DCT_FASTINT 1
#define FF_DCT_INT 2
#define FF_DCT_MMX 3
#define FF_DCT_ALTIVEC 5
#define FF_DCT_FAAN 6
/**
* IDCT algorithm, see FF_IDCT_* below.
* - encoding: Set by user.
* - decoding: Set by user.
*/
int idct_algo;
#define FF_IDCT_AUTO 0
#define FF_IDCT_INT 1
#define FF_IDCT_SIMPLE 2
#define FF_IDCT_SIMPLEMMX 3
#define FF_IDCT_ARM 7
#define FF_IDCT_ALTIVEC 8
#if FF_API_ARCH_SH4
#define FF_IDCT_SH4 9
#endif
#define FF_IDCT_SIMPLEARM 10
#if FF_API_UNUSED_MEMBERS
#define FF_IDCT_IPP 13
#endif /* FF_API_UNUSED_MEMBERS */
#define FF_IDCT_XVID 14
#if FF_API_IDCT_XVIDMMX
#define FF_IDCT_XVIDMMX 14
#endif /* FF_API_IDCT_XVIDMMX */
#define FF_IDCT_SIMPLEARMV5TE 16
#define FF_IDCT_SIMPLEARMV6 17
#if FF_API_ARCH_SPARC
#define FF_IDCT_SIMPLEVIS 18
#endif
#define FF_IDCT_FAAN 20
#define FF_IDCT_SIMPLENEON 22
#if FF_API_ARCH_ALPHA
#define FF_IDCT_SIMPLEALPHA 23
#endif
#define FF_IDCT_SIMPLEAUTO 128
/**
* bits per sample/pixel from the demuxer (needed for huffyuv).
* - encoding: Set by libavcodec.
* - decoding: Set by user.
*/
int bits_per_coded_sample;
/**
* Bits per sample/pixel of internal libavcodec pixel/sample format.
* - encoding: set by user.
* - decoding: set by libavcodec.
*/
int bits_per_raw_sample;
#if FF_API_LOWRES
/**
* low resolution decoding, 1-> 1/2 size, 2->1/4 size
* - encoding: unused
* - decoding: Set by user.
* Code outside libavcodec should access this field using:
* av_codec_{get,set}_lowres(avctx)
*/
int lowres;
#endif
#if FF_API_CODED_FRAME
/**
* the picture in the bitstream
* - encoding: Set by libavcodec.
* - decoding: unused
*
* @deprecated use the quality factor packet side data instead
*/
attribute_deprecated AVFrame *coded_frame;
#endif
/**
* thread count
* is used to decide how many independent tasks should be passed to execute()
* - encoding: Set by user.
* - decoding: Set by user.
*/
int thread_count;
/**
* Which multithreading methods to use.
* Use of FF_THREAD_FRAME will increase decoding delay by one frame per thread,
* so clients which cannot provide future frames should not use it.
*
* - encoding: Set by user, otherwise the default is used.
* - decoding: Set by user, otherwise the default is used.
*/
int thread_type;
#define FF_THREAD_FRAME 1 ///< Decode more than one frame at once
#define FF_THREAD_SLICE 2 ///< Decode more than one part of a single frame at once
/**
* Which multithreading methods are in use by the codec.
* - encoding: Set by libavcodec.
* - decoding: Set by libavcodec.
*/
int active_thread_type;
/**
* Set by the client if its custom get_buffer() callback can be called
* synchronously from another thread, which allows faster multithreaded decoding.
* draw_horiz_band() will be called from other threads regardless of this setting.
* Ignored if the default get_buffer() is used.
* - encoding: Set by user.
* - decoding: Set by user.
*/
int thread_safe_callbacks;
/**
* The codec may call this to execute several independent things.
* It will return only after finishing all tasks.
* The user may replace this with some multithreaded implementation,
* the default implementation will execute the parts serially.
* @param count the number of things to execute
* - encoding: Set by libavcodec, user can override.
* - decoding: Set by libavcodec, user can override.
*/
int (*execute)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg), void *arg2, int *ret, int count, int size);
/**
* The codec may call this to execute several independent things.
* It will return only after finishing all tasks.
* The user may replace this with some multithreaded implementation,
* the default implementation will execute the parts serially.
* Also see avcodec_thread_init and e.g. the --enable-pthread configure option.
* @param c context passed also to func
* @param count the number of things to execute
* @param arg2 argument passed unchanged to func
* @param ret return values of executed functions, must have space for "count" values. May be NULL.
* @param func function that will be called count times, with jobnr from 0 to count-1.
* threadnr will be in the range 0 to c->thread_count-1 < MAX_THREADS and so that no
* two instances of func executing at the same time will have the same threadnr.
* @return always 0 currently, but code should handle a future improvement where when any call to func
* returns < 0 no further calls to func may be done and < 0 is returned.
* - encoding: Set by libavcodec, user can override.
* - decoding: Set by libavcodec, user can override.
*/
int (*execute2)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg, int jobnr, int threadnr), void *arg2, int *ret, int count);
/**
* noise vs. sse weight for the nsse comparison function
* - encoding: Set by user.
* - decoding: unused
*/
int nsse_weight;
/**
* profile
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
int profile;
#define FF_PROFILE_UNKNOWN -99
#define FF_PROFILE_RESERVED -100
#define FF_PROFILE_AAC_MAIN 0
#define FF_PROFILE_AAC_LOW 1
#define FF_PROFILE_AAC_SSR 2
#define FF_PROFILE_AAC_LTP 3
#define FF_PROFILE_AAC_HE 4
#define FF_PROFILE_AAC_HE_V2 28
#define FF_PROFILE_AAC_LD 22
#define FF_PROFILE_AAC_ELD 38
#define FF_PROFILE_MPEG2_AAC_LOW 128
#define FF_PROFILE_MPEG2_AAC_HE 131
#define FF_PROFILE_DNXHD 0
#define FF_PROFILE_DNXHR_LB 1
#define FF_PROFILE_DNXHR_SQ 2
#define FF_PROFILE_DNXHR_HQ 3
#define FF_PROFILE_DNXHR_HQX 4
#define FF_PROFILE_DNXHR_444 5
#define FF_PROFILE_DTS 20
#define FF_PROFILE_DTS_ES 30
#define FF_PROFILE_DTS_96_24 40
#define FF_PROFILE_DTS_HD_HRA 50
#define FF_PROFILE_DTS_HD_MA 60
#define FF_PROFILE_DTS_EXPRESS 70
#define FF_PROFILE_MPEG2_422 0
#define FF_PROFILE_MPEG2_HIGH 1
#define FF_PROFILE_MPEG2_SS 2
#define FF_PROFILE_MPEG2_SNR_SCALABLE 3
#define FF_PROFILE_MPEG2_MAIN 4
#define FF_PROFILE_MPEG2_SIMPLE 5
#define FF_PROFILE_H264_CONSTRAINED (1<<9) // 8+1; constraint_set1_flag
#define FF_PROFILE_H264_INTRA (1<<11) // 8+3; constraint_set3_flag
#define FF_PROFILE_H264_BASELINE 66
#define FF_PROFILE_H264_CONSTRAINED_BASELINE (66|FF_PROFILE_H264_CONSTRAINED)
#define FF_PROFILE_H264_MAIN 77
#define FF_PROFILE_H264_EXTENDED 88
#define FF_PROFILE_H264_HIGH 100
#define FF_PROFILE_H264_HIGH_10 110
#define FF_PROFILE_H264_HIGH_10_INTRA (110|FF_PROFILE_H264_INTRA)
#define FF_PROFILE_H264_MULTIVIEW_HIGH 118
#define FF_PROFILE_H264_HIGH_422 122
#define FF_PROFILE_H264_HIGH_422_INTRA (122|FF_PROFILE_H264_INTRA)
#define FF_PROFILE_H264_STEREO_HIGH 128
#define FF_PROFILE_H264_HIGH_444 144
#define FF_PROFILE_H264_HIGH_444_PREDICTIVE 244
#define FF_PROFILE_H264_HIGH_444_INTRA (244|FF_PROFILE_H264_INTRA)
#define FF_PROFILE_H264_CAVLC_444 44
#define FF_PROFILE_VC1_SIMPLE 0
#define FF_PROFILE_VC1_MAIN 1
#define FF_PROFILE_VC1_COMPLEX 2
#define FF_PROFILE_VC1_ADVANCED 3
#define FF_PROFILE_MPEG4_SIMPLE 0
#define FF_PROFILE_MPEG4_SIMPLE_SCALABLE 1
#define FF_PROFILE_MPEG4_CORE 2
#define FF_PROFILE_MPEG4_MAIN 3
#define FF_PROFILE_MPEG4_N_BIT 4
#define FF_PROFILE_MPEG4_SCALABLE_TEXTURE 5
#define FF_PROFILE_MPEG4_SIMPLE_FACE_ANIMATION 6
#define FF_PROFILE_MPEG4_BASIC_ANIMATED_TEXTURE 7
#define FF_PROFILE_MPEG4_HYBRID 8
#define FF_PROFILE_MPEG4_ADVANCED_REAL_TIME 9
#define FF_PROFILE_MPEG4_CORE_SCALABLE 10
#define FF_PROFILE_MPEG4_ADVANCED_CODING 11
#define FF_PROFILE_MPEG4_ADVANCED_CORE 12
#define FF_PROFILE_MPEG4_ADVANCED_SCALABLE_TEXTURE 13
#define FF_PROFILE_MPEG4_SIMPLE_STUDIO 14
#define FF_PROFILE_MPEG4_ADVANCED_SIMPLE 15
#define FF_PROFILE_JPEG2000_CSTREAM_RESTRICTION_0 1
#define FF_PROFILE_JPEG2000_CSTREAM_RESTRICTION_1 2
#define FF_PROFILE_JPEG2000_CSTREAM_NO_RESTRICTION 32768
#define FF_PROFILE_JPEG2000_DCINEMA_2K 3
#define FF_PROFILE_JPEG2000_DCINEMA_4K 4
#define FF_PROFILE_VP9_0 0
#define FF_PROFILE_VP9_1 1
#define FF_PROFILE_VP9_2 2
#define FF_PROFILE_VP9_3 3
#define FF_PROFILE_HEVC_MAIN 1
#define FF_PROFILE_HEVC_MAIN_10 2
#define FF_PROFILE_HEVC_MAIN_STILL_PICTURE 3
#define FF_PROFILE_HEVC_REXT 4
/**
* level
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
int level;
#define FF_LEVEL_UNKNOWN -99
/**
* Skip loop filtering for selected frames.
* - encoding: unused
* - decoding: Set by user.
*/
enum AVDiscard skip_loop_filter;
/**
* Skip IDCT/dequantization for selected frames.
* - encoding: unused
* - decoding: Set by user.
*/
enum AVDiscard skip_idct;
/**
* Skip decoding for selected frames.
* - encoding: unused
* - decoding: Set by user.
*/
enum AVDiscard skip_frame;
/**
* Header containing style information for text subtitles.
* For SUBTITLE_ASS subtitle type, it should contain the whole ASS
* [Script Info] and [V4+ Styles] section, plus the [Events] line and
* the Format line following. It shouldn't include any Dialogue line.
* - encoding: Set/allocated/freed by user (before avcodec_open2())
* - decoding: Set/allocated/freed by libavcodec (by avcodec_open2())
*/
uint8_t *subtitle_header;
int subtitle_header_size;
#if FF_API_ERROR_RATE
/**
* @deprecated use the 'error_rate' private AVOption of the mpegvideo
* encoders
*/
attribute_deprecated
int error_rate;
#endif
#if FF_API_VBV_DELAY
/**
* VBV delay coded in the last frame (in periods of a 27 MHz clock).
* Used for compliant TS muxing.
* - encoding: Set by libavcodec.
* - decoding: unused.
* @deprecated this value is now exported as a part of
* AV_PKT_DATA_CPB_PROPERTIES packet side data
*/
attribute_deprecated
uint64_t vbv_delay;
#endif
#if FF_API_SIDEDATA_ONLY_PKT
/**
* Encoding only and set by default. Allow encoders to output packets
* that do not contain any encoded data, only side data.
*
* Some encoders need to output such packets, e.g. to update some stream
* parameters at the end of encoding.
*
* @deprecated this field disables the default behaviour and
* it is kept only for compatibility.
*/
attribute_deprecated
int side_data_only_packets;
#endif
/**
* Audio only. The number of "priming" samples (padding) inserted by the
* encoder at the beginning of the audio. I.e. this number of leading
* decoded samples must be discarded by the caller to get the original audio
* without leading padding.
*
* - decoding: unused
* - encoding: Set by libavcodec. The timestamps on the output packets are
* adjusted by the encoder so that they always refer to the
* first sample of the data actually contained in the packet,
* including any added padding. E.g. if the timebase is
* 1/samplerate and the timestamp of the first input sample is
* 0, the timestamp of the first output packet will be
* -initial_padding.
*/
int initial_padding;
/**
* - decoding: For codecs that store a framerate value in the compressed
* bitstream, the decoder may export it here. { 0, 1} when
* unknown.
* - encoding: May be used to signal the framerate of CFR content to an
* encoder.
*/
AVRational framerate;
/**
* Nominal unaccelerated pixel format, see AV_PIX_FMT_xxx.
* - encoding: unused.
* - decoding: Set by libavcodec before calling get_format()
*/
enum AVPixelFormat sw_pix_fmt;
/**
* Timebase in which pkt_dts/pts and AVPacket.dts/pts are.
* Code outside libavcodec should access this field using:
* av_codec_{get,set}_pkt_timebase(avctx)
* - encoding unused.
* - decoding set by user.
*/
AVRational pkt_timebase;
/**
* AVCodecDescriptor
* Code outside libavcodec should access this field using:
* av_codec_{get,set}_codec_descriptor(avctx)
* - encoding: unused.
* - decoding: set by libavcodec.
*/
const AVCodecDescriptor *codec_descriptor;
#if !FF_API_LOWRES
/**
* low resolution decoding, 1-> 1/2 size, 2->1/4 size
* - encoding: unused
* - decoding: Set by user.
* Code outside libavcodec should access this field using:
* av_codec_{get,set}_lowres(avctx)
*/
int lowres;
#endif
/**
* Current statistics for PTS correction.
* - decoding: maintained and used by libavcodec, not intended to be used by user apps
* - encoding: unused
*/
int64_t pts_correction_num_faulty_pts; /// Number of incorrect PTS values so far
int64_t pts_correction_num_faulty_dts; /// Number of incorrect DTS values so far
int64_t pts_correction_last_pts; /// PTS of the last frame
int64_t pts_correction_last_dts; /// DTS of the last frame
/**
* Character encoding of the input subtitles file.
* - decoding: set by user
* - encoding: unused
*/
char *sub_charenc;
/**
* Subtitles character encoding mode. Formats or codecs might be adjusting
* this setting (if they are doing the conversion themselves for instance).
* - decoding: set by libavcodec
* - encoding: unused
*/
int sub_charenc_mode;
#define FF_SUB_CHARENC_MODE_DO_NOTHING -1 ///< do nothing (demuxer outputs a stream supposed to be already in UTF-8, or the codec is bitmap for instance)
#define FF_SUB_CHARENC_MODE_AUTOMATIC 0 ///< libavcodec will select the mode itself
#define FF_SUB_CHARENC_MODE_PRE_DECODER 1 ///< the AVPacket data needs to be recoded to UTF-8 before being fed to the decoder, requires iconv
/**
* Skip processing alpha if supported by codec.
* Note that if the format uses pre-multiplied alpha (common with VP6,
* and recommended due to better video quality/compression)
* the image will look as if alpha-blended onto a black background.
* However for formats that do not use pre-multiplied alpha
* there might be serious artefacts (though e.g. libswscale currently
* assumes pre-multiplied alpha anyway).
* Code outside libavcodec should access this field using AVOptions
*
* - decoding: set by user
* - encoding: unused
*/
int skip_alpha;
/**
* Number of samples to skip after a discontinuity
* - decoding: unused
* - encoding: set by libavcodec
*/
int seek_preroll;
#if !FF_API_DEBUG_MV
/**
* debug motion vectors
* Code outside libavcodec should access this field using AVOptions
* - encoding: Set by user.
* - decoding: Set by user.
*/
int debug_mv;
#define FF_DEBUG_VIS_MV_P_FOR 0x00000001 //visualize forward predicted MVs of P frames
#define FF_DEBUG_VIS_MV_B_FOR 0x00000002 //visualize forward predicted MVs of B frames
#define FF_DEBUG_VIS_MV_B_BACK 0x00000004 //visualize backward predicted MVs of B frames
#endif
/**
* custom intra quantization matrix
* Code outside libavcodec should access this field using av_codec_g/set_chroma_intra_matrix()
* - encoding: Set by user, can be NULL.
* - decoding: unused.
*/
uint16_t *chroma_intra_matrix;
/**
* dump format separator.
* can be ", " or "\n " or anything else
* Code outside libavcodec should access this field using AVOptions
* (NO direct access).
* - encoding: Set by user.
* - decoding: Set by user.
*/
uint8_t *dump_separator;
/**
* ',' separated list of allowed decoders.
* If NULL then all are allowed
* - encoding: unused
* - decoding: set by user through AVOPtions (NO direct access)
*/
char *codec_whitelist;
/*
* Properties of the stream that gets decoded
* To be accessed through av_codec_get_properties() (NO direct access)
* - encoding: unused
* - decoding: set by libavcodec
*/
unsigned properties;
#define FF_CODEC_PROPERTY_LOSSLESS 0x00000001
#define FF_CODEC_PROPERTY_CLOSED_CAPTIONS 0x00000002
/**
* Additional data associated with the entire coded stream.
*
* - decoding: unused
* - encoding: may be set by libavcodec after avcodec_open2().
*/
AVPacketSideData *coded_side_data;
int nb_coded_side_data;
/**
* A reference to the AVHWFramesContext describing the input (for encoding)
* or output (decoding) frames. The reference is set by the caller and
* afterwards owned (and freed) by libavcodec.
*
* - decoding: This field should be set by the caller from the get_format()
* callback. The previous reference (if any) will always be
* unreffed by libavcodec before the get_format() call.
*
* If the default get_buffer2() is used with a hwaccel pixel
* format, then this AVHWFramesContext will be used for
* allocating the frame buffers.
*
* - encoding: For hardware encoders configured to use a hwaccel pixel
* format, this field should be set by the caller to a reference
* to the AVHWFramesContext describing input frames.
* AVHWFramesContext.format must be equal to
* AVCodecContext.pix_fmt.
*
* This field should be set before avcodec_open2() is called.
*/
AVBufferRef *hw_frames_ctx;
/**
* Control the form of AVSubtitle.rects[N]->ass
* - decoding: set by user
* - encoding: unused
*/
int sub_text_format;
#define FF_SUB_TEXT_FMT_ASS 0
#if FF_API_ASS_TIMING
#define FF_SUB_TEXT_FMT_ASS_WITH_TIMINGS 1
#endif
/**
* Audio only. The amount of padding (in samples) appended by the encoder to
* the end of the audio. I.e. this number of decoded samples must be
* discarded by the caller from the end of the stream to get the original
* audio without any trailing padding.
*
* - decoding: unused
* - encoding: unused
*/
int trailing_padding;
} AVCodecContext; AVCodec:
/**
* AVCodec.
*/
typedef struct AVCodec {
/**
* Name of the codec implementation.
* The name is globally unique among encoders and among decoders (but an
* encoder and a decoder can share the same name).
* This is the primary way to find a codec from the user perspective.
*/
const char *name;
/**
* Descriptive name for the codec, meant to be more human readable than name.
* You should use the NULL_IF_CONFIG_SMALL() macro to define it.
*/
const char *long_name;
enum AVMediaType type;
enum AVCodecID id;
/**
* Codec capabilities.
* see AV_CODEC_CAP_*
*/
int capabilities;
const AVRational *supported_framerates; ///< array of supported framerates, or NULL if any, array is terminated by {0,0}
const enum AVPixelFormat *pix_fmts; ///< array of supported pixel formats, or NULL if unknown, array is terminated by -1
const int *supported_samplerates; ///< array of supported audio samplerates, or NULL if unknown, array is terminated by 0
const enum AVSampleFormat *sample_fmts; ///< array of supported sample formats, or NULL if unknown, array is terminated by -1
const uint64_t *channel_layouts; ///< array of support channel layouts, or NULL if unknown. array is terminated by 0
uint8_t max_lowres; ///< maximum value for lowres supported by the decoder, no direct access, use av_codec_get_max_lowres()
const AVClass *priv_class; ///< AVClass for the private context
const AVProfile *profiles; ///< array of recognized profiles, or NULL if unknown, array is terminated by {FF_PROFILE_UNKNOWN}
/*****************************************************************
* No fields below this line are part of the public API. They
* may not be used outside of libavcodec and can be changed and
* removed at will.
* New public fields should be added right above.
*****************************************************************
*/
int priv_data_size;
struct AVCodec *next;
/**
* @name Frame-level threading support functions
* @{
*/
/**
* If defined, called on thread contexts when they are created.
* If the codec allocates writable tables in init(), re-allocate them here.
* priv_data will be set to a copy of the original.
*/
int (*init_thread_copy)(AVCodecContext *);
/**
* Copy necessary context variables from a previous thread context to the current one.
* If not defined, the next thread will start automatically; otherwise, the codec
* must call ff_thread_finish_setup().
*
* dst and src will (rarely) point to the same context, in which case memcpy should be skipped.
*/
int (*update_thread_context)(AVCodecContext *dst, const AVCodecContext *src);
/** @} */
/**
* Private codec-specific defaults.
*/
const AVCodecDefault *defaults;
/**
* Initialize codec static data, called from avcodec_register().
*/
void (*init_static_data)(struct AVCodec *codec);
int (*init)(AVCodecContext *);
int (*encode_sub)(AVCodecContext *, uint8_t *buf, int buf_size,
const struct AVSubtitle *sub);
/**
* Encode data to an AVPacket.
*
* @param avctx codec context
* @param avpkt output AVPacket (may contain a user-provided buffer)
* @param[in] frame AVFrame containing the raw data to be encoded
* @param[out] got_packet_ptr encoder sets to 0 or 1 to indicate that a
* non-empty packet was returned in avpkt.
* @return 0 on success, negative error code on failure
*/
int (*encode2)(AVCodecContext *avctx, AVPacket *avpkt, const AVFrame *frame,
int *got_packet_ptr);
int (*decode)(AVCodecContext *, void *outdata, int *outdata_size, AVPacket *avpkt);
int (*close)(AVCodecContext *);
/**
* Decode/encode API with decoupled packet/frame dataflow. The API is the
* same as the avcodec_ prefixed APIs (avcodec_send_frame() etc.), except
* that:
* - never called if the codec is closed or the wrong type,
* - AVPacket parameter change side data is applied right before calling
* AVCodec->send_packet,
* - if AV_CODEC_CAP_DELAY is not set, drain packets or frames are never sent,
* - only one drain packet is ever passed down (until the next flush()),
* - a drain AVPacket is always NULL (no need to check for avpkt->size).
*/
int (*send_frame)(AVCodecContext *avctx, const AVFrame *frame);
int (*send_packet)(AVCodecContext *avctx, const AVPacket *avpkt);
int (*receive_frame)(AVCodecContext *avctx, AVFrame *frame);
int (*receive_packet)(AVCodecContext *avctx, AVPacket *avpkt);
/**
* Flush buffers.
* Will be called when seeking
*/
void (*flush)(AVCodecContext *);
/**
* Internal codec capabilities.
* See FF_CODEC_CAP_* in internal.h
*/
int caps_internal;
} AVCodec;AVPicture:
/**
* Picture data structure.
*
* Up to four components can be stored into it, the last component is
* alpha.
* @deprecated use AVFrame or imgutils functions instead
*/
typedef struct AVPicture {
attribute_deprecated
uint8_t *data[AV_NUM_DATA_POINTERS]; ///< pointers to the image data planes
attribute_deprecated
int linesize[AV_NUM_DATA_POINTERS]; ///< number of bytes per line
} AVPicture;AVCodecParameters :
/**
* This struct describes the properties of an encoded stream.
*
* sizeof(AVCodecParameters) is not a part of the public ABI, this struct must
* be allocated with avcodec_parameters_alloc() and freed with
* avcodec_parameters_free().
*/
typedef struct AVCodecParameters {
/**
* General type of the encoded data.
*/
enum AVMediaType codec_type;
/**
* Specific type of the encoded data (the codec used).
*/
enum AVCodecID codec_id;
/**
* Additional information about the codec (corresponds to the AVI FOURCC).
*/
uint32_t codec_tag;
/**
* Extra binary data needed for initializing the decoder, codec-dependent.
*
* Must be allocated with av_malloc() and will be freed by
* avcodec_parameters_free(). The allocated size of extradata must be at
* least extradata_size + AV_INPUT_BUFFER_PADDING_SIZE, with the padding
* bytes zeroed.
*/
uint8_t *extradata;
/**
* Size of the extradata content in bytes.
*/
int extradata_size;
/**
* - video: the pixel format, the value corresponds to enum AVPixelFormat.
* - audio: the sample format, the value corresponds to enum AVSampleFormat.
*/
int format;
/**
* The average bitrate of the encoded data (in bits per second).
*/
int64_t bit_rate;
/**
* The number of bits per sample in the codedwords.
*
* This is basically the bitrate per sample. It is mandatory for a bunch of
* formats to actually decode them. It's the number of bits for one sample in
* the actual coded bitstream.
*
* This could be for example 4 for ADPCM
* For PCM formats this matches bits_per_raw_sample
* Can be 0
*/
int bits_per_coded_sample;
/**
* This is the number of valid bits in each output sample. If the
* sample format has more bits, the least significant bits are additional
* padding bits, which are always 0. Use right shifts to reduce the sample
* to its actual size. For example, audio formats with 24 bit samples will
* have bits_per_raw_sample set to 24, and format set to AV_SAMPLE_FMT_S32.
* To get the original sample use "(int32_t)sample >> 8"."
*
* For ADPCM this might be 12 or 16 or similar
* Can be 0
*/
int bits_per_raw_sample;
/**
* Codec-specific bitstream restrictions that the stream conforms to.
*/
int profile;
int level;
/**
* Video only. The dimensions of the video frame in pixels.
*/
int width;
int height;
/**
* Video only. The aspect ratio (width / height) which a single pixel
* should have when displayed.
*
* When the aspect ratio is unknown / undefined, the numerator should be
* set to 0 (the denominator may have any value).
*/
AVRational sample_aspect_ratio;
/**
* Video only. The order of the fields in interlaced video.
*/
enum AVFieldOrder field_order;
/**
* Video only. Additional colorspace characteristics.
*/
enum AVColorRange color_range;
enum AVColorPrimaries color_primaries;
enum AVColorTransferCharacteristic color_trc;
enum AVColorSpace color_space;
enum AVChromaLocation chroma_location;
/**
* Video only. Number of delayed frames.
*/
int video_delay;
/**
* Audio only. The channel layout bitmask. May be 0 if the channel layout is
* unknown or unspecified, otherwise the number of bits set must be equal to
* the channels field.
*/
uint64_t channel_layout;
/**
* Audio only. The number of audio channels.
*/
int channels;
/**
* Audio only. The number of audio samples per second.
*/
int sample_rate;
/**
* Audio only. The number of bytes per coded audio frame, required by some
* formats.
*
* Corresponds to nBlockAlign in WAVEFORMATEX.
*/
int block_align;
/**
* Audio only. Audio frame size, if known. Required by some formats to be static.
*/
int frame_size;
/**
* Audio only. The amount of padding (in samples) inserted by the encoder at
* the beginning of the audio. I.e. this number of leading decoded samples
* must be discarded by the caller to get the original audio without leading
* padding.
*/
int initial_padding;
/**
* Audio only. The amount of padding (in samples) appended by the encoder to
* the end of the audio. I.e. this number of decoded samples must be
* discarded by the caller from the end of the stream to get the original
* audio without any trailing padding.
*/
int trailing_padding;
/**
* Audio only. Number of samples to skip after a discontinuity.
*/
int seek_preroll;
} AVCodecParameters;/**
* Register the codec codec and initialize libavcodec.
*
* @warning either this function or avcodec_register_all() must be called
* before any other libavcodec functions.
*
* @see avcodec_register_all()
*/
void avcodec_register(AVCodec *codec);
/**
* Register all the codecs, parsers and bitstream filters which were enabled at
* configuration time. If you do not call this function you can select exactly
* which formats you want to support, by using the individual registration
* functions.
*
* @see avcodec_register
* @see av_register_codec_parser
* @see av_register_bitstream_filter
*/
void avcodec_register_all(void);
/**
* Allocate an AVCodecContext and set its fields to default values. The
* resulting struct should be freed with avcodec_free_context().
*
* @param codec if non-NULL, allocate private data and initialize defaults
* for the given codec. It is illegal to then call avcodec_open2()
* with a different codec.
* If NULL, then the codec-specific defaults won't be initialized,
* which may result in suboptimal default settings (this is
* important mainly for encoders, e.g. libx264).
*
* @return An AVCodecContext filled with default values or NULL on failure.
*/
AVCodecContext *avcodec_alloc_context3(const AVCodec *codec);/**
* Free the codec context and everything associated with it and write NULL to
* the provided pointer.
*/
void avcodec_free_context(AVCodecContext **avctx);/**
* Initialize the AVCodecContext to use the given AVCodec. Prior to using this
* function the context has to be allocated with avcodec_alloc_context3().
*
* The functions avcodec_find_decoder_by_name(), avcodec_find_encoder_by_name(),
* avcodec_find_decoder() and avcodec_find_encoder() provide an easy way for
* retrieving a codec.
*
* @warning This function is not thread safe!
*
* @note Always call this function before using decoding routines (such as
* @ref avcodec_receive_frame()).
*
* @code
* avcodec_register_all();
* av_dict_set(&opts, "b", "2.5M", 0);
* codec = avcodec_find_decoder(AV_CODEC_ID_H264);
* if (!codec)
* exit(1);
*
* context = avcodec_alloc_context3(codec);
*
* if (avcodec_open2(context, codec, opts) < 0)
* exit(1);
* @endcode
*
* @param avctx The context to initialize.
* @param codec The codec to open this context for. If a non-NULL codec has been
* previously passed to avcodec_alloc_context3() or
* for this context, then this parameter MUST be either NULL or
* equal to the previously passed codec.
* @param options A dictionary filled with AVCodecContext and codec-private options.
* On return this object will be filled with options that were not found.
*
* @return zero on success, a negative value on error
* @see avcodec_alloc_context3(), avcodec_find_decoder(), avcodec_find_encoder(),
* av_dict_set(), av_opt_find().
*/
int avcodec_open2(AVCodecContext *avctx, const AVCodec *codec, AVDictionary **options);/**
* Free the packet, if the packet is reference counted, it will be
* unreferenced first.
*
* @param packet packet to be freed. The pointer will be set to NULL.
* @note passing NULL is a no-op.
*/
void av_packet_free(AVPacket **pkt);
/**
* Initialize optional fields of a packet with default values.
*
* Note, this does not touch the data and size members, which have to be
* initialized separately.
*
* @param pkt packet
*/
void av_init_packet(AVPacket *pkt);
/**
* Allocate the payload of a packet and initialize its fields with
* default values.
*
* @param pkt packet
* @param size wanted payload size
* @return 0 if OK, AVERROR_xxx otherwise
*/
int av_new_packet(AVPacket *pkt, int size);/**
* Setup a new reference to the data described by a given packet
*
* If src is reference-counted, setup dst as a new reference to the
* buffer in src. Otherwise allocate a new buffer in dst and copy the
* data from src into it.
*
* All the other fields are copied from src.
*
* @see av_packet_unref
*
* @param dst Destination packet
* @param src Source packet
*
* @return 0 on success, a negative AVERROR on error.
*/
int av_packet_ref(AVPacket *dst, const AVPacket *src);
/**
* Wipe the packet.
*
* Unreference the buffer referenced by the packet and reset the
* remaining packet fields to their default values.
*
* @param pkt The packet to be unreferenced.
*/
void av_packet_unref(AVPacket *pkt);/**
* Find a registered decoder with a matching codec ID.
*
* @param id AVCodecID of the requested decoder
* @return A decoder if one was found, NULL otherwise.
*/
AVCodec *avcodec_find_decoder(enum AVCodecID id);/**
* Supply raw packet data as input to a decoder.
*
* Internally, this call will copy relevant AVCodecContext fields, which can
* influence decoding per-packet, and apply them when the packet is actually
* decoded. (For example AVCodecContext.skip_frame, which might direct the
* decoder to drop the frame contained by the packet sent with this function.)
*
* @warning The input buffer, avpkt->data must be AV_INPUT_BUFFER_PADDING_SIZE
* larger than the actual read bytes because some optimized bitstream
* readers read 32 or 64 bits at once and could read over the end.
*
* @warning Do not mix this API with the legacy API (like avcodec_decode_video2())
* on the same AVCodecContext. It will return unexpected results now
* or in future libavcodec versions.
*
* @note The AVCodecContext MUST have been opened with @ref avcodec_open2()
* before packets may be fed to the decoder.
*
* @param avctx codec context
* @param[in] avpkt The input AVPacket. Usually, this will be a single video
* frame, or several complete audio frames.
* Ownership of the packet remains with the caller, and the
* decoder will not write to the packet. The decoder may create
* a reference to the packet data (or copy it if the packet is
* not reference-counted).
* Unlike with older APIs, the packet is always fully consumed,
* and if it contains multiple frames (e.g. some audio codecs),
* will require you to call avcodec_receive_frame() multiple
* times afterwards before you can send a new packet.
* It can be NULL (or an AVPacket with data set to NULL and
* size set to 0); in this case, it is considered a flush
* packet, which signals the end of the stream. Sending the
* first flush packet will return success. Subsequent ones are
* unnecessary and will return AVERROR_EOF. If the decoder
* still has frames buffered, it will return them after sending
* a flush packet.
*
* @return 0 on success, otherwise negative error code:
* AVERROR(EAGAIN): input is not accepted right now - the packet must be
* resent after trying to read output
* AVERROR_EOF: the decoder has been flushed, and no new packets can
* be sent to it (also returned if more than 1 flush
* packet is sent)
* AVERROR(EINVAL): codec not opened, it is an encoder, or requires flush
* AVERROR(ENOMEM): failed to add packet to internal queue, or similar
* other errors: legitimate decoding errors
*/
int avcodec_send_packet(AVCodecContext *avctx, const AVPacket *avpkt);
/**
* Return decoded output data from a decoder.
*
* @param avctx codec context
* @param frame This will be set to a reference-counted video or audio
* frame (depending on the decoder type) allocated by the
* decoder. Note that the function will always call
* av_frame_unref(frame) before doing anything else.
*
* @return
* 0: success, a frame was returned
* AVERROR(EAGAIN): output is not available right now - user must try
* to send new input
* AVERROR_EOF: the decoder has been fully flushed, and there will be
* no more output frames
* AVERROR(EINVAL): codec not opened, or it is an encoder
* other negative values: legitimate decoding errors
*/
int avcodec_receive_frame(AVCodecContext *avctx, AVFrame *frame);
typedef struct AVCodecParserContext {
void *priv_data;
struct AVCodecParser *parser;
int64_t frame_offset; /* offset of the current frame */
int64_t cur_offset; /* current offset
(incremented by each av_parser_parse()) */
int64_t next_frame_offset; /* offset of the next frame */
/* video info */
int pict_type; /* XXX: Put it back in AVCodecContext. */
/**
* This field is used for proper frame duration computation in lavf.
* It signals, how much longer the frame duration of the current frame
* is compared to normal frame duration.
*
* frame_duration = (1 + repeat_pict) * time_base
*
* It is used by codecs like H.264 to display telecined material.
*/
int repeat_pict; /* XXX: Put it back in AVCodecContext. */
int64_t pts; /* pts of the current frame */
int64_t dts; /* dts of the current frame */
/* private data */
int64_t last_pts;
int64_t last_dts;
int fetch_timestamp;
#define AV_PARSER_PTS_NB 4
int cur_frame_start_index;
int64_t cur_frame_offset[AV_PARSER_PTS_NB];
int64_t cur_frame_pts[AV_PARSER_PTS_NB];
int64_t cur_frame_dts[AV_PARSER_PTS_NB];
int flags;
#define PARSER_FLAG_COMPLETE_FRAMES 0x0001
#define PARSER_FLAG_ONCE 0x0002
/// Set if the parser has a valid file offset
#define PARSER_FLAG_FETCHED_OFFSET 0x0004
#define PARSER_FLAG_USE_CODEC_TS 0x1000
int64_t offset; ///< byte offset from starting packet start
int64_t cur_frame_end[AV_PARSER_PTS_NB];
/**
* Set by parser to 1 for key frames and 0 for non-key frames.
* It is initialized to -1, so if the parser doesn't set this flag,
* old-style fallback using AV_PICTURE_TYPE_I picture type as key frames
* will be used.
*/
int key_frame;
#if FF_API_CONVERGENCE_DURATION
/**
* @deprecated unused
*/
attribute_deprecated
int64_t convergence_duration;
#endif
// Timestamp generation support:
/**
* Synchronization point for start of timestamp generation.
*
* Set to >0 for sync point, 0 for no sync point and <0 for undefined
* (default).
*
* For example, this corresponds to presence of H.264 buffering period
* SEI message.
*/
int dts_sync_point;
/**
* Offset of the current timestamp against last timestamp sync point in
* units of AVCodecContext.time_base.
*
* Set to INT_MIN when dts_sync_point unused. Otherwise, it must
* contain a valid timestamp offset.
*
* Note that the timestamp of sync point has usually a nonzero
* dts_ref_dts_delta, which refers to the previous sync point. Offset of
* the next frame after timestamp sync point will be usually 1.
*
* For example, this corresponds to H.264 cpb_removal_delay.
*/
int dts_ref_dts_delta;
/**
* Presentation delay of current frame in units of AVCodecContext.time_base.
*
* Set to INT_MIN when dts_sync_point unused. Otherwise, it must
* contain valid non-negative timestamp delta (presentation time of a frame
* must not lie in the past).
*
* This delay represents the difference between decoding and presentation
* time of the frame.
*
* For example, this corresponds to H.264 dpb_output_delay.
*/
int pts_dts_delta;
/**
* Position of the packet in file.
*
* Analogous to cur_frame_pts/dts
*/
int64_t cur_frame_pos[AV_PARSER_PTS_NB];
/**
* Byte position of currently parsed frame in stream.
*/
int64_t pos;
/**
* Previous frame byte position.
*/
int64_t last_pos;
/**
* Duration of the current frame.
* For audio, this is in units of 1 / AVCodecContext.sample_rate.
* For all other types, this is in units of AVCodecContext.time_base.
*/
int duration;
enum AVFieldOrder field_order;
/**
* Indicate whether a picture is coded as a frame, top field or bottom field.
*
* For example, H.264 field_pic_flag equal to 0 corresponds to
* AV_PICTURE_STRUCTURE_FRAME. An H.264 picture with field_pic_flag
* equal to 1 and bottom_field_flag equal to 0 corresponds to
* AV_PICTURE_STRUCTURE_TOP_FIELD.
*/
enum AVPictureStructure picture_structure;
/**
* Picture number incremented in presentation or output order.
* This field may be reinitialized at the first picture of a new sequence.
*
* For example, this corresponds to H.264 PicOrderCnt.
*/
int output_picture_number;
/**
* Dimensions of the decoded video intended for presentation.
*/
int width;
int height;
/**
* Dimensions of the coded video.
*/
int coded_width;
int coded_height;
/**
* The format of the coded data, corresponds to enum AVPixelFormat for video
* and for enum AVSampleFormat for audio.
*
* Note that a decoder can have considerable freedom in how exactly it
* decodes the data, so the format reported here might be different from the
* one returned by a decoder.
*/
int format;
} AVCodecParserContext;
typedef struct AVCodecParser {
int codec_ids[5]; /* several codec IDs are permitted */
int priv_data_size;
int (*parser_init)(AVCodecParserContext *s);
/* This callback never returns an error, a negative value means that
* the frame start was in a previous packet. */
int (*parser_parse)(AVCodecParserContext *s,
AVCodecContext *avctx,
const uint8_t **poutbuf, int *poutbuf_size,
const uint8_t *buf, int buf_size);
void (*parser_close)(AVCodecParserContext *s);
int (*split)(AVCodecContext *avctx, const uint8_t *buf, int buf_size);
struct AVCodecParser *next;
} AVCodecParser;
AVCodecParser *av_parser_next(const AVCodecParser *c);
void av_register_codec_parser(AVCodecParser *parser);
AVCodecParserContext *av_parser_init(int codec_id);/**
* Parse a packet.
*
* @param s parser context.
* @param avctx codec context.
* @param poutbuf set to pointer to parsed buffer or NULL if not yet finished.
* @param poutbuf_size set to size of parsed buffer or zero if not yet finished.
* @param buf input buffer.
* @param buf_size buffer size in bytes without the padding. I.e. the full buffer
size is assumed to be buf_size + AV_INPUT_BUFFER_PADDING_SIZE.
To signal EOF, this should be 0 (so that the last frame
can be output).
* @param pts input presentation timestamp.
* @param dts input decoding timestamp.
* @param pos input byte position in stream.
* @return the number of bytes of the input bitstream used.
*
* Example:
* @code
* while(in_len){
* len = av_parser_parse2(myparser, AVCodecContext, &data, &size,
* in_data, in_len,
* pts, dts, pos);
* in_data += len;
* in_len -= len;
*
* if(size)
* decode_frame(data, size);
* }
* @endcode
*/
int av_parser_parse2(AVCodecParserContext *s,
AVCodecContext *avctx,
uint8_t **poutbuf, int *poutbuf_size,
const uint8_t *buf, int buf_size,
int64_t pts, int64_t dts,
int64_t pos);/**
* Find a registered encoder with a matching codec ID.
*
* @param id AVCodecID of the requested encoder
* @return An encoder if one was found, NULL otherwise.
*/
AVCodec *avcodec_find_encoder(enum AVCodecID id);
有些 已经 attribute_deprecated 了，就不一一 列举了。