本章包含内容：
- 需求描述
- Objective-C调用Swift
- Swift调用Objective-C
在Objective-C中混编C++是老生常谈。C++执行效率快，且拥有良好的跨平台性，在很多时候我们需要在我们的OC代码中混编c++。
在OC中混编C++是无缝对接，只需要把.m文件改为.mm即可，在这里不做重点讲述。
2014年苹果在开发者发布会中，推出了Swift，Swift的优异和缺点在这里不做细述。
在经过swift前几个版本的沉淀，到现在的swift3，swift也逐渐成熟。
听说2017年秋季，苹果将推出4.0版本，该版本提供后台API，开源的语言就是牛逼啊～～～～
作为一个苹果码农，坚决不能停下学习的脚步，时刻保持最佳状态。
好了，废话有点多，进入正题，我就说一句，只会Objective-C的苹果开发者要混不下去了。so，我们这里要做的是敲开Objective-C与Swift的壁垒。
一、Objective-C调用Swift
1.创建一个Objective-C工程，如下图：
Objective-C工程
2.在AppDelegate添加以下代码：
- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions {
ViewController * vc = [[ViewController alloc] init];
UINavigationController * nav = [[UINavigationController alloc] initWithRootViewController:vc];
self.window.rootViewController = nav;
return YES;
}
3.创建一个swift文件，此时会提示是否创建桥接文件，我们选择Create Bridging Header如下：
创建Swift文件的同时，创建桥接头文件
此时，工程中会有一个XXX-Bridging-Header.h文件，其中XXX是工程名。此时我们在该文件中 #import "xxx.h"则可以在Swift中调用OC方法，此时的xxx为OC类名。
另外，工程中也添加了一个隐藏的XXX-Swift.h文件，此时我们在需要调用Swift方法的文件里#import "XXX-Swift.h"即可调用Swift方法，其中XXX为工程名。
如果我们想把XXX-Swift.h的XXX修改为自己想要的名称可以通过一下方式修改自定义的名称：
TARGETS->Build Settings -> Packaging -> Product Name
修改XXX-Swift.h命名
下面是实现代码：
ViewController.m文件中添加一下代码
#import "ViewController.h"
#import "OcAndSwiftDemo-Swift.h"
@interface ViewController ()
@end
@implementation ViewController
- (void)viewDidLoad {
[super viewDidLoad];
self.view.backgroundColor = [UIColor redColor];
self.title = @"OC Controller";
[self createBtn];
}
//创建按钮，测试OC调用Swift方法
- (void)createBtn{
UIButton * btn = [[UIButton alloc] initWithFrame:CGRectMake(([UIScreen mainScreen].bounds.size.width - 300)*0.5, 80, 300, 50)];
[btn setTitle:@"调用swift多参方法" forState:UIControlStateNormal];
[btn addTarget:self action:@selector(func1) forControlEvents:UIControlEventTouchUpInside];
[self.view addSubview:btn];
UIButton * btn2 = [[UIButton alloc] initWithFrame:CGRectMake(([UIScreen mainScreen].bounds.size.width - 300)*0.5, 140, 300, 50)];
[btn2 setTitle:@"调用swift含有返回值方法" forState:UIControlStateNormal];
[btn2 addTarget:self action:@selector(func2) forControlEvents:UIControlEventTouchUpInside];
[self.view addSubview:btn2];
UIButton * btn3 = [[UIButton alloc] initWithFrame:CGRectMake(([UIScreen mainScreen].bounds.size.width - 300)*0.5, 200, 300, 50)];
[btn3 setTitle:@"调用swift静态方法" forState:UIControlStateNormal];
[btn3 addTarget:self action:@selector(func3) forControlEvents:UIControlEventTouchUpInside];
[self.view addSubview:btn3];
}
#pragma mark - 调用Swift方法
- (void)func1{
SwiftController * swiftVC = [[SwiftController alloc] init];
[swiftVC swiftFunc1WithPar1:@"OC调用" par2:@"Swift多参方法"];
}
- (void)func2{
SwiftController * swiftVC = [[SwiftController alloc] init];
NSLog(@"%@",[swiftVC swiftFunc2WithPar:@"OC调用Swift含有返回值方法"]);
}
- (void)func3{
[SwiftController swiftFuncStaticWithPar:@"OC调用Swift静态方法"];
}
- (void)didReceiveMemoryWarning {
[super didReceiveMemoryWarning];
// Dispose of any resources that can be recreated.
}
@end
SwiftController.swift文件中添加一下代码
import UIKit
class SwiftController: UIViewController {
override func viewDidLoad() {
super.viewDidLoad()
self.view.backgroundColor = UIColor.blue;
self.title = "Swift Controller"
}
//1.带参数的swift方法
func swiftFunc1(par1: String, par2: String) {
print(par1 + par2)
}
//2.带返回值的swfit方法
func swiftFunc2(par: String) -> String {
return par;
}
//3.swift静态方法
static func swiftFuncStatic(par: String) {
print(par)
}
override func didReceiveMemoryWarning() {
super.didReceiveMemoryWarning()
}
}
到这里，我们实现了在OC中调用Swift
二、Swift调用Objective-C
Swift调用OC，在上面我们已经知道只需要在XXX-Bridging-Header.h中import我们需要的类，就可以在Swift中调用OC方法。
1.我们在ViewController.h中公开OC方法
#import
@interface ViewController : UIViewController
//公开的OC方法，待Swift调用
- (void)ocMethod1Par1:(NSString *)par1 par2:(NSString *)par2;
- (NSString *)ocMethod2Par:(NSString *)par;
+ (void)ocStaticMethodPar:(NSString *)par;
@end
2.我们在ViewController.m中实现OC方法
#import "ViewController.h"
#import "OcAndSwiftDemo-Swift.h"
@interface ViewController ()
@end
@implementation ViewController
- (void)viewDidLoad {
[super viewDidLoad];
self.view.backgroundColor = [UIColor redColor];
self.title = @"OC Controller";
[self createBtn];
}
//创建按钮，测试OC调用Swift方法
- (void)createBtn{
UIButton * btn = [[UIButton alloc] initWithFrame:CGRectMake(([UIScreen mainScreen].bounds.size.width - 300)*0.5, 80, 300, 50)];
[btn setTitle:@"调用swift多参方法" forState:UIControlStateNormal];
[btn addTarget:self action:@selector(func1) forControlEvents:UIControlEventTouchUpInside];
[self.view addSubview:btn];
UIButton * btn2 = [[UIButton alloc] initWithFrame:CGRectMake(([UIScreen mainScreen].bounds.size.width - 300)*0.5, 140, 300, 50)];
[btn2 setTitle:@"调用swift含有返回值方法" forState:UIControlStateNormal];
[btn2 addTarget:self action:@selector(func2) forControlEvents:UIControlEventTouchUpInside];
[self.view addSubview:btn2];
UIButton * btn3 = [[UIButton alloc] initWithFrame:CGRectMake(([UIScreen mainScreen].bounds.size.width - 300)*0.5, 200, 300, 50)];
[btn3 setTitle:@"调用swift静态方法" forState:UIControlStateNormal];
[btn3 addTarget:self action:@selector(func3) forControlEvents:UIControlEventTouchUpInside];
[self.view addSubview:btn3];
UIButton * push = [[UIButton alloc] initWithFrame:CGRectMake(100, 300, 150, 50)];
[push setTitle:@"push" forState:UIControlStateNormal];
[push addTarget:self action:@selector(pushClick) forControlEvents:UIControlEventTouchUpInside];
[self.view addSubview:push];
}
#pragma mark - 调用Swift方法
- (void)func1{
SwiftController * swiftVC = [[SwiftController alloc] init];
[swiftVC swiftFunc1WithPar1:@"OC调用" par2:@"Swift多参方法"];
}
- (void)func2{
SwiftController * swiftVC = [[SwiftController alloc] init];
NSLog(@"%@",[swiftVC swiftFunc2WithPar:@"OC调用Swift含有返回值方法"]);
}
- (void)func3{
[SwiftController swiftFuncStaticWithPar:@"OC调用Swift静态方法"];
}
#pragma mark - push 到 Swift 控制器
- (void)pushClick{
SwiftController * swiftVC = [[SwiftController alloc] init];
[self.navigationController pushViewController:swiftVC animated:YES];
}
#pragma mark - OC方法，在Swift文件中被调用
- (void)ocMethod1Par1:(NSString *)par1 par2:(NSString *)par2{
NSLog(@"%@%@",par1,par2);
}
- (NSString *)ocMethod2Par:(NSString *)par{
return par;
}
+ (void)ocStaticMethodPar:(NSString *)par{
NSLog(@"%@", par);
}
- (void)didReceiveMemoryWarning {
[super didReceiveMemoryWarning];
// Dispose of any resources that can be recreated.
}
@end
3.在XXX-Bridging-Header.h中import我们需要的类
#import "ViewController.h"
4.在Swift中调用OC方法
import UIKit
class SwiftController: UIViewController {
override func viewDidLoad() {
super.viewDidLoad()
self.view.backgroundColor = UIColor.blue;
self.title = "Swift Controller"
let btn = UIButton(frame: CGRect(x: (UIScreen.main.bounds.size.width - 200)*0.5, y: 100, width: 200, height: 50));
btn.setTitle("调用OC多参方法", for: .normal)
btn.addTarget(self, action: #selector(funcClick1), for: .touchUpInside)
self.view.addSubview(btn)
let btn1 = UIButton(frame: CGRect(x: (UIScreen.main.bounds.size.width - 200)*0.5, y: 160, width: 200, height: 50));
btn1.setTitle("调用OC返回值方法", for: .normal)
btn1.addTarget(self, action: #selector(funcClick2), for: .touchUpInside)
self.view.addSubview(btn1)
let btn2 = UIButton(frame: CGRect(x: (UIScreen.main.bounds.size.width - 200)*0.5, y: 230, width: 200, height: 50));
btn2.setTitle("调用OC+方法", for: .normal)
btn2.addTarget(self, action: #selector(funcClickStatic1), for: .touchUpInside)
self.view.addSubview(btn2)
}
//1.带参数的swift方法
func swiftFunc1(par1: String, par2: String) {
print(par1 + par2)
}
//2.带返回值的swfit方法
func swiftFunc2(par: String) -> String {
return par;
}
//3.swift静态方法
static func swiftFuncStatic(par: String) {
print(par)
}
//MARK: - 在Swift中调用OC方法
func funcClick1() {
let vc = ViewController()
vc.ocMethod1Par1("Swift调用", par2: "OC多参方法")
}
func funcClick2() {
let vc = ViewController()
print(vc.ocMethod2Par("Swift调用OC含有返回值的方法"))
}
func funcClickStatic1() {
ViewController.ocStaticMethodPar("Swift调用OC+方法")
}
override func didReceiveMemoryWarning() {
super.didReceiveMemoryWarning()
}
}
到这里，我们实现了OC 和 Swift的混编。