Linux系统 Oracle 10gR2（10.2.0.5）RAC安装
Linux平台 Oracle 10gR2（10.2.0.5）RAC安装 Part1：准备工作
环境：OEL 5.7 + Oracle 10.2.0.5 RAC
1.实施前准备工作
- 1.1 服务器安装操作系统
- 1.2 Oracle安装介质
- 1.3 共享存储规划
- 1.4 网络规划分配
2.主机配置
- 2.1 使用yum安装oracle-validated包来简化主机配置的部分工作
- 2.2 共享存储配置
- 2.3 配置/etc/hosts
- 2.4 配置Oracle用户等价性
- 2.5 创建软件目录
- 2.6 配置用户环境变量
- 2.7 关闭各节点主机防火墙和SELinux
- 2.8 各节点系统时间校对
Linux平台 Oracle 10gR2 RAC安装步骤笔记：
Part1：准备工作
Part2：clusterware安装和升级
Part3：db安装和升级
1.实施前准备工作
1.1 服务器安装操作系统
配置完全相同的两台服务器，安装相同版本的Linux操作系统。留存系统光盘或者镜像文件。
我这里是OEL5.7，系统目录大小均一致。对应OEL5.7的系统镜像文件放在服务器上，供后面配置本地yum使用。
1.2 Oracle安装介质
Oracle 10.2.0.1版本的clusterware和db，以及10.2.0.5的升级包。
-rwxr-xr-x 1 root root 302M 12月 24 13:07 10201_clusterware_linux_x86_64.cpio.gz
-rwxr-xr-x 1 root root 724M 12月 24 13:08 10201_database_linux_x86_64.cpio.gz
-rwxr-xr-x 1 root root 1.2G 12月 24 13:10 p8202632_10205_Linux-x86-64.zip这个用MOS账号自己去support.oracle.com下载，然后只需要上传到节点1即可。
1.3 共享存储规划
从存储中划分出两台主机可以同时看到的共享LUN。
我这里自己的实验环境是使用openfiler模拟出共享LUN：
5个100M大小LUN；用于OCR，votedisk；
3个10G大小LUN；用于DATA；
2个5G大小LUN；用于FRA。
openfiler使用可参考：Openfiler配置RAC共享存储
1.4 网络规划分配
公有网络 以及 私有网络。
公有网络：物理网卡eth0(public IP，VIP)，需要4个IP地址。
私有网络：物理网卡eth1(private IP)，需要2个内部IP地址。
实际生产环境一般服务器都至少有4块网卡。建议是两两bonding后分别作为公有网络和私有网络。
2.主机配置
2.1 使用yum安装oracle-validated包来简化主机配置的部分工作
由于系统环境是OEL5.7，可以简化依赖包安装、内核参数调整，用户和组创建等工作，可参考：OEL上使用yum install oracle-validated 简化主机配置工作
2.2 共享存储配置：
我这里openfiler所在主机的IP地址为192.168.1.12。归划的10块LUN全部映射到iqn.2006-01.com.openfiler:rac10g上。
[root@oradb28 ~]# iscsiadm -m discovery -t sendtargets -p 192.168.1.12
192.168.1.12:3260,1 iqn.2006-01.com.openfiler:rac10g
#手工登录iscsi目标
iscsiadm -m node -T iqn.2006-01.com.openfiler:rac10g -p 192.168.1.12 -l
#配置自动登录
iscsiadm -m node -T iqn.2006-01.com.openfiler:rac10g -p 192.168.1.12 --op update -n node.startup -v automatic
#重启iscsi服务
service iscsi stop
service iscsi start注意：安装10g RAC，要确保共享设备上划分的LUN要在所有节点上被识别为相同设备名称。
[root@oradb27 ~]# ls -lh /dev/sd*
brw-r----- 1 root disk 8, 0 Jan 2 22:40 /dev/sda
brw-r----- 1 root disk 8, 16 Jan 2 22:40 /dev/sdb
brw-r----- 1 root disk 8, 32 Jan 2 22:40 /dev/sdc
brw-r----- 1 root disk 8, 48 Jan 2 22:40 /dev/sdd
brw-r----- 1 root disk 8, 64 Jan 2 22:40 /dev/sde
brw-r----- 1 root disk 8, 80 Jan 2 22:40 /dev/sdf
brw-r----- 1 root disk 8, 96 Jan 2 22:40 /dev/sdg
brw-r----- 1 root disk 8, 112 Jan 2 22:40 /dev/sdh
brw-r----- 1 root disk 8, 128 Jan 2 22:40 /dev/sdi
brw-r----- 1 root disk 8, 144 Jan 2 22:40 /dev/sdj
[root@oradb28 ~]# ls -lh /dev/sd*
brw-r----- 1 root disk 8, 0 Jan 2 22:41 /dev/sda
brw-r----- 1 root disk 8, 16 Jan 2 22:41 /dev/sdb
brw-r----- 1 root disk 8, 32 Jan 2 22:41 /dev/sdc
brw-r----- 1 root disk 8, 48 Jan 2 22:41 /dev/sdd
brw-r----- 1 root disk 8, 64 Jan 2 22:41 /dev/sde
brw-r----- 1 root disk 8, 80 Jan 2 22:41 /dev/sdf
brw-r----- 1 root disk 8, 96 Jan 2 22:41 /dev/sdg
brw-r----- 1 root disk 8, 112 Jan 2 22:41 /dev/sdh
brw-r----- 1 root disk 8, 128 Jan 2 22:41 /dev/sdi
brw-r----- 1 root disk 8, 144 Jan 2 22:41 /dev/sdj其中sda,sdb,sdc,sdd,sde是100M大小的LUN，我们分别将这5个LUN各分成一个区（我实验中发现如果不分区直接绑成裸设备，在安装clusterware后执行root.sh时会报错：“Failed to upgrade Oracle Cluster Registry configuration”，分区后绑定分区成裸设备，发现可以正常执行通过）
[root@oradb27 ~]# ls -lh /dev/sd*
brw-r----- 1 root disk 8, 0 Jan 3 09:36 /dev/sda
brw-r----- 1 root disk 8, 1 Jan 3 09:36 /dev/sda1
brw-r----- 1 root disk 8, 16 Jan 3 09:36 /dev/sdb
brw-r----- 1 root disk 8, 17 Jan 3 09:36 /dev/sdb1
brw-r----- 1 root disk 8, 32 Jan 3 09:36 /dev/sdc
brw-r----- 1 root disk 8, 33 Jan 3 09:36 /dev/sdc1
brw-r----- 1 root disk 8, 48 Jan 3 09:36 /dev/sdd
brw-r----- 1 root disk 8, 49 Jan 3 09:36 /dev/sdd1
brw-r----- 1 root disk 8, 64 Jan 3 09:36 /dev/sde
brw-r----- 1 root disk 8, 65 Jan 3 09:36 /dev/sde1
[root@oradb28 crshome_1]# ls -lh /dev/sd*
brw-r----- 1 root disk 8, 0 Jan 3 09:36 /dev/sda
brw-r----- 1 root disk 8, 1 Jan 3 09:36 /dev/sda1
brw-r----- 1 root disk 8, 16 Jan 3 09:36 /dev/sdb
brw-r----- 1 root disk 8, 17 Jan 3 09:36 /dev/sdb1
brw-r----- 1 root disk 8, 32 Jan 3 09:36 /dev/sdc
brw-r----- 1 root disk 8, 33 Jan 3 09:36 /dev/sdc1
brw-r----- 1 root disk 8, 48 Jan 3 09:36 /dev/sdd
brw-r----- 1 root disk 8, 49 Jan 3 09:36 /dev/sdd1
brw-r----- 1 root disk 8, 64 Jan 3 09:36 /dev/sde
brw-r----- 1 root disk 8, 65 Jan 3 09:36 /dev/sde11)使用udev 绑定raw devices ，供ocr和voting disk使用
编辑配置文件并追加以下内容：
# vi /etc/udev/rules.d/60-raw.rules
ACTION=="add", KERNEL=="sda1", RUN+="/bin/raw /dev/raw/raw1 %N"
ACTION=="add", KERNEL=="sdb1", RUN+="/bin/raw /dev/raw/raw2 %N"
ACTION=="add", KERNEL=="sdc1", RUN+="/bin/raw /dev/raw/raw3 %N"
ACTION=="add", KERNEL=="sdd1", RUN+="/bin/raw /dev/raw/raw4 %N"
ACTION=="add", KERNEL=="sde1", RUN+="/bin/raw /dev/raw/raw5 %N"
ACTION=="add", KERNEL=="raw*", OWNER=="oracle", GROUP=="oinstall", MODE=="0660"启动start_udev:
[root@oradb27 rules.d]# start_udev
Starting udev: [ OK ]
[root@oradb27 rules.d]# ls -l /dev/raw*
crw-rw---- 1 oracle oinstall 162, 0 Jan 2 22:37 /dev/rawctl
/dev/raw:
total 0
crw-rw---- 1 oracle oinstall 162, 1 Jan 2 23:11 raw1
crw-rw---- 1 oracle oinstall 162, 2 Jan 2 23:11 raw2
crw-rw---- 1 oracle oinstall 162, 3 Jan 2 23:11 raw3
crw-rw---- 1 oracle oinstall 162, 4 Jan 2 23:11 raw4
crw-rw---- 1 oracle oinstall 162, 5 Jan 2 23:11 raw5
[root@oradb27 rules.d]# 配置文件60-raw.rules传到节点2：
[root@oradb27 rules.d]# scp /etc/udev/rules.d/60-raw.rules oradb28:/etc/udev/rules.d/在节点2启动start_udev。
注意：如果安装中发现raw曾被使用过，可能需要dd清除头部信息；
dd if=/dev/zero of=/dev/raw/raw1 bs=1048576 count=10
dd if=/dev/zero of=/dev/raw/raw2 bs=1048576 count=10
dd if=/dev/zero of=/dev/raw/raw3 bs=1048576 count=10
dd if=/dev/zero of=/dev/raw/raw4 bs=1048576 count=10
dd if=/dev/zero of=/dev/raw/raw5 bs=1048576 count=102)使用udev 绑定asm devices，供data磁盘组和fra磁盘组使用
for i in f g h i j;
do
echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id -g -u -s %p\", RESULT==\"`scsi_id -g -u -s /block/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"oracle\", GROUP=\"oinstall\", MODE=\"0660\""
done操作过程如下：
[root@oradb27 rules.d]# for i in f g h i j;
> do
> echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id -g -u -s %p\", RESULT==\"`scsi_id -g -u -s /block/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"oracle\", GROUP=\"oinstall\", MODE=\"0660\""
> done
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="14f504e46494c455279366c36366a2d5a4243752d58394a33", NAME="asm-diskf", OWNER="oracle", GROUP="oinstall", MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="14f504e46494c45525453586652542d67786f682d594c4a66", NAME="asm-diskg", OWNER="oracle", GROUP="oinstall", MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="14f504e46494c455232586c3151572d62504e412d3343547a", NAME="asm-diskh", OWNER="oracle", GROUP="oinstall", MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="14f504e46494c45527061334151682d4666656d2d5a6a4c67", NAME="asm-diski", OWNER="oracle", GROUP="oinstall", MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="14f504e46494c4552495649757a352d675251532d47744353", NAME="asm-diskj", OWNER="oracle", GROUP="oinstall", MODE="0660"
[root@oradb27 rules.d]#
vi
[root@oradb27 rules.d]# vi 99-oracle-asmdevices.rules
[root@oradb27 rules.d]# start_udev
Starting udev: [ OK ]
[root@oradb27 rules.d]# ls -lh /dev/asm*
brw-rw---- 1 oracle oinstall 8, 80 Jan 2 23:18 /dev/asm-diskf
brw-rw---- 1 oracle oinstall 8, 96 Jan 2 23:18 /dev/asm-diskg
brw-rw---- 1 oracle oinstall 8, 112 Jan 2 23:18 /dev/asm-diskh
brw-rw---- 1 oracle oinstall 8, 128 Jan 2 23:18 /dev/asm-diski
brw-rw---- 1 oracle oinstall 8, 144 Jan 2 23:18 /dev/asm-diskj
#拷贝配置文件99-oracle-asmdevices.rules到节点2，启动start_udev
[root@oradb27 rules.d]# scp 99-oracle-asmdevices.rules oradb28:/etc/udev/rules.d/99-oracle-asmdevices.rules
[root@oradb28 ~]# start_udev
Starting udev: [ OK ]
[root@oradb28 ~]# ls -l /dev/asm*
brw-rw---- 1 oracle oinstall 8, 80 Jan 2 23:20 /dev/asm-diskf
brw-rw---- 1 oracle oinstall 8, 96 Jan 2 23:20 /dev/asm-diskg
brw-rw---- 1 oracle oinstall 8, 112 Jan 2 23:20 /dev/asm-diskh
brw-rw---- 1 oracle oinstall 8, 128 Jan 2 23:20 /dev/asm-diski
brw-rw---- 1 oracle oinstall 8, 144 Jan 2 23:20 /dev/asm-diskj2.3 配置/etc/hosts
按照规划配置节点1的/etc/hosts内容
#public ip
192.168.1.27 oradb27
192.168.1.28 oradb28
#private ip
10.10.10.27 oradb27-priv
10.10.10.28 oradb28-priv
#virtual ip
192.168.1.57 oradb27-vip
192.168.1.58 oradb28-vip然后scp拷贝/etc/hosts配置文件到节点2:
scp /etc/hosts oradb28:/etc/2.4 配置Oracle用户等价性
#所有节点执行：
ssh-keygen -q -t rsa -N "" -f ~/.ssh/id_rsa
#节点1执行：
ssh 192.168.1.27 cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys
ssh 192.168.1.28 cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys
chmod 600 ~/.ssh/authorized_keys
scp ~/.ssh/authorized_keys 192.168.1.28:~/.ssh/
#所有节点执行验证ssh等价性：
ssh 192.168.1.27 date;ssh 192.168.1.28 date;
ssh oradb27 date;ssh oradb28 date;
ssh oradb27-priv date;ssh oradb28-priv date;对配置用户ssh互信步骤如有疑问可以参考：记录一则Linux SSH的互信配置过程
2.5 创建软件目录
mkdir -p /u01/app/oracle/product/10.2.0.5/dbhome_1
mkdir -p /u01/app/oracle/product/10.2.0.5/crshome_1
chown -R oracle:oinstall /u01/app2.6 配置用户环境变量
节点1: vi /home/oracle/.bash_profile
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/oracle/product/10.2.0.5/dbhome_1
export ORA_CRS_HOME=/u01/app/oracle/product/10.2.0.5/crshome_1
export ORACLE_SID=jyrac1
export NLS_LANG=AMERICAN_AMERICA.US7ASCII
export PATH=$ORACLE_HOME/bin:$ORA_CRS_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
alias sql="sqlplus \"/as sysdba\""节点2：vi /home/oracle/.bash_profile
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/oracle/product/10.2.0.5/dbhome_1
export ORA_CRS_HOME=/u01/app/oracle/product/10.2.0.5/crshome_1
export ORACLE_SID=jyrac2
export NLS_LANG=AMERICAN_AMERICA.US7ASCII
export PATH=$ORACLE_HOME/bin:$ORA_CRS_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
alias sql="sqlplus \"/as sysdba\""2.7 关闭各节点主机防火墙和SELinux
各节点检查、关闭防火墙和SE Linux：
service iptables status
service iptables stop
chkconfig iptables off
getenforce
setenforce 0
vi /etc/selinux/config
修改：Enforcing -> disabled2.8 各节点系统时间校对
service ntpd stop
date
#如果时间有问题，就按下面的语法进行设定
date 072310472015 //设定日期为2015-07-23 10:47:00
hwclock -w
hwclock -r至此，主机配置的相关准备工作已经完成。
Linux平台 Oracle 10gR2（10.2.0.5）RAC安装 Part2：clusterware安装和升级
环境：OEL 5.7 + Oracle 10.2.0.5 RAC
3.安装Clusterware
- 3.1 解压clusterware安装介质
- 3.2 开始安装clusterware
- 3.3 root用户按提示执行脚本
- 3.4 vipca创建(可能不需要)
4.升级Clusterware
- 4.1 解压Patchset包
- 4.2 开始升级clusterware
- 4.3 root用户按提示执行脚本
3.安装Clusterware
3.1 解压clusterware安装介质
将存放Oracle相关安装介质目录赋权给Oracle用户：
[root@oradb27 media]# chown -R oracle:oinstall /u01/media/oracle用户解压安装介质：
[oracle@oradb27 media]$ gunzip 10201_clusterware_linux_x86_64.cpio.gz
[oracle@oradb27 media]$ cpio -idmv < 10201_clusterware_linux_x86_64.cpio 执行预检查：
[root@oradb27 media]# /u01/media/clusterware/rootpre/rootpre.sh
No OraCM running 3.2 开始安装clusterware
使用Xmanager（MAC系统是XQuartz）开始安装clusterware：
[root@oradb27 media]# cd /u01/media/clusterware/install
[root@oradb27 install]# vi oraparam.ini
修改下面这里，
[Certified Versions]
Linux=RedHat-3,SUSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2
添加redhat-5，即：
[Certified Versions]
Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2,redhat-5
[root@oradb27 clusterware]# pwd
/u01/media/clusterware
[root@oradb27 clusterware]# ./runInstaller 3.3 root用户按提示执行脚本
节点1执行：
#开始没有对/dev/sd{a,b,c,d,e},这5个LUN分区
[root@oradb27 rules.d]# /u01/app/oracle/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oracle/oraInventory to 770.
Changing groupname of /u01/app/oracle/oraInventory to oinstall.
The execution of the script is complete
[root@oradb27 rules.d]# /u01/app/oracle/product/10.2.0.5/crshome_1/root.sh
WARNING: directory '/u01/app/oracle/product/10.2.0.5' is not owned by root
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up NS directories
Failed to upgrade Oracle Cluster Registry configuration
#对/dev/sd{a,b,c,d,e},这5个LUN分别分区sd{a,b,c,d,e}1后执行成功
[root@oradb27 10.2.0.5]# /u01/app/oracle/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oracle/oraInventory to 770.
Changing groupname of /u01/app/oracle/oraInventory to oinstall.
The execution of the script is complete
[root@oradb27 10.2.0.5]# /u01/app/oracle/product/10.2.0.5/crshome_1/root.sh
WARNING: directory '/u01/app/oracle/product/10.2.0.5' is not owned by root
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product/10.2.0.5' is not owned by root
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node :
node 1: oradb27 oradb27-priv oradb27
node 2: oradb28 oradb28-priv oradb28
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/raw/raw3
Now formatting voting device: /dev/raw/raw4
Now formatting voting device: /dev/raw/raw5
Format of 3 voting devices complete.
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
oradb27
CSS is inactive on these nodes.
oradb28
Local node checking complete.
Run root.sh on remaining nodes to start CRS daemons.
[root@oradb27 10.2.0.5]# 官方对这个错误的解决方法可参考MOS文档： Executing root.sh errors with "Failed To Upgrade Oracle Cluster Registry Configuration" (文档 ID 466673.1)
Before running the root.sh on the first node in the cluster do the following:
- Download Patch:4679769 from Metalink (contains a patched version of clsfmt.bin).
- Do the following steps as stated in the patch README to fix the problem:
Note: clsfmt.bin need only be replaced on the 1st node of the cluster
节点2执行：
[root@oradb28 crshome_1]# /u01/app/oracle/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oracle/oraInventory to 770.
Changing groupname of /u01/app/oracle/oraInventory to oinstall.
The execution of the script is complete
[root@oradb28 crshome_1]# /u01/app/oracle/product/10.2.0.5/crshome_1/root.sh
WARNING: directory '/u01/app/oracle/product/10.2.0.5' is not owned by root
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product/10.2.0.5' is not owned by root
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node : <private interconnect name>
node 1: oradb27 oradb27-priv oradb27
node 2: oradb28 oradb28-priv oradb28
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
oradb27
oradb28
CSS is active on all nodes.
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Oracle CRS stack installed and running under init(1M)
Running vipca(silent) for configuring nodeapps
/u01/app/oracle/product/10.2.0.5/crshome_1/jdk/jre//bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
[root@oradb28 crshome_1]# 上面的这个报错信息，需要在/u01/app/oracle/product/10.2.0.5/crshome_1/bin下修改vipca和srvctl文件内容：
[root@oradb28 bin]# ls -l vipca
-rwxr-xr-x 1 oracle oinstall 5343 Jan 3 09:44 vipca
[root@oradb28 bin]# ls -l srvctl
-rwxr-xr-x 1 oracle oinstall 5828 Jan 3 09:44 srvctl
加入
unset LD_ASSUME_KERNEL重新运行 /u01/app/oracle/product/10.2.0.5/crshome_1/root.sh
[root@oradb28 bin]# /u01/app/oracle/product/10.2.0.5/crshome_1/root.sh
WARNING: directory '/u01/app/oracle/product/10.2.0.5' is not owned by root
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
Checking to see if Oracle CRS stack is already configured
Oracle CRS stack is already configured and will be running under init(1M)没有再报错，但是也没有成功显示进行vipca创建。
3.4 vipca创建(可能不需要)
如果上面3.3步骤正常执行成功了vipca，那么此步骤不再需要；
如果上面3.3步骤没有正常执行成功vipca，那么就需要手工在最后一个节点手工vipca创建：
这里手工执行vipca还遇到一个错误如下：
[root@oradb28 bin]# ./vipca
Error 0(Native: listNetInterfaces:[3])
[Error 0(Native: listNetInterfaces:[3])]查看网络层相关的信息，并手工注册信息：
[root@oradb28 bin]# ./oifcfg getif
[root@oradb28 bin]# ./oifcfg iflist
eth0 192.168.1.0
eth1 10.10.10.0
[root@oradb28 bin]# ifconfig
eth0 Link encap:Ethernet HWaddr 06:CB:72:01:07:88
inet addr:192.168.1.28 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1018747 errors:0 dropped:0 overruns:0 frame:0
TX packets:542075 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2196870487 (2.0 GiB) TX bytes:43268497 (41.2 MiB)
eth1 Link encap:Ethernet HWaddr 22:1A:5A:DE:C1:21
inet addr:10.10.10.28 Bcast:10.10.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5343 errors:0 dropped:0 overruns:0 frame:0
TX packets:3656 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1315035 (1.2 MiB) TX bytes:1219689 (1.1 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2193 errors:0 dropped:0 overruns:0 frame:0
TX packets:2193 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:65167 (63.6 KiB) TX bytes:65167 (63.6 KiB)
[root@oradb28 bin]# ./oifcfg -h
PRIF-9: incorrect usage
Name:
oifcfg - Oracle Interface Configuration Tool.
Usage: oifcfg iflist [-p [-n]]
oifcfg setif {-node | -global} {/:}...
oifcfg getif [-node | -global] [ -if [/] [-type ] ]
oifcfg delif [-node | -global] [[/]]
oifcfg [-help]
- name of the host, as known to a communications network
- name by which the interface is configured in the system
- subnet address of the interface
- type of the interface { cluster_interconnect | public | storage }
[root@oradb28 bin]# ./oifcfg setif -global eth0/192.168.1.0:public
[root@oradb28 bin]# ./oifcfg getif
eth0 192.168.1.0 global public
[root@oradb28 bin]#
[root@oradb28 bin]#
[root@oradb28 bin]#
[root@oradb28 bin]# ./oifcfg setif -global eth1/10.10.10.0:cluster_interconnect
[root@oradb28 bin]# ./oifcfg getif
eth0 192.168.1.0 global public
eth1 10.10.10.0 global cluster_interconnect
[root@oradb28 bin]# 当oifcfg getif正常获取信息后，再次运行VIPCA创建成功。
然后再继续回到安装clusterware的界面继续也显示成功。
此时查看集群的状态应该都是正常的：
[oracle@oradb27 bin]$ crsctl check crs
CSS appears healthy
CRS appears healthy
EVM appears healthy
[oracle@oradb27 bin]$ crs_stat -t -v
Name Type R/RA F/FT Target State Host
----------------------------------------------------------------------
ora....b27.gsd application 0/5 0/0 ONLINE ONLINE oradb27
ora....b27.ons application 0/3 0/0 ONLINE ONLINE oradb27
ora....b27.vip application 0/0 0/0 ONLINE ONLINE oradb27
ora....b28.gsd application 0/5 0/0 ONLINE ONLINE oradb28
ora....b28.ons application 0/3 0/0 ONLINE ONLINE oradb28
ora....b28.vip application 0/0 0/0 ONLINE ONLINE oradb28
[oracle@oradb27 bin]$
[oracle@oradb28 ~]$ crsctl check crs
CSS appears healthy
CRS appears healthy
EVM appears healthy
[oracle@oradb28 ~]$ crs_stat -t -v
Name Type R/RA F/FT Target State Host
----------------------------------------------------------------------
ora....b27.gsd application 0/5 0/0 ONLINE ONLINE oradb27
ora....b27.ons application 0/3 0/0 ONLINE ONLINE oradb27
ora....b27.vip application 0/0 0/0 ONLINE ONLINE oradb27
ora....b28.gsd application 0/5 0/0 ONLINE ONLINE oradb28
ora....b28.ons application 0/3 0/0 ONLINE ONLINE oradb28
ora....b28.vip application 0/0 0/0 ONLINE ONLINE oradb28
[oracle@oradb28 ~]$ 4.升级Clusterware
4.1 解压Patchset包
[root@oradb27 media]$ unzip p8202632_10205_Linux-x86-64.zip
[root@oradb27 media]$ cd Disk1/
[root@oradb27 Disk1]$ pwd
/u01/media/Disk14.2 开始升级clusterware
使用xquartz开始升级clusterware：
ssh -X [email protected]
[root@oradb27 Disk1]$ ./runInstaller 升级过程中，在预安装检查时，有一个参数设置不符合检查要求，如下：
Checking for rmem_default=1048576; found rmem_default=262144. Failed <<<<可以调整/etc/sysctl.conf配置文件，然后执行sysctl -p生效。
4.3 root用户按提示执行脚本
1. Log in as the root user.
2. As the root user, perform the following tasks:
a. Shutdown the CRS daemons by issuing the following command:
/u01/app/oracle/product/10.2.0.5/crshome_1/bin/crsctl stop crs
b. Run the shell script located at:
/u01/app/oracle/product/10.2.0.5/crshome_1/install/root102.sh
This script will automatically start the CRS daemons on the
patched node upon completion.
3. After completing this procedure, proceed to the next node and repeat.即分别执行：
/u01/app/oracle/product/10.2.0.5/crshome_1/bin/crsctl stop crs
/u01/app/oracle/product/10.2.0.5/crshome_1/install/root102.sh节点1执行：
[root@oradb27 bin]# /u01/app/oracle/product/10.2.0.5/crshome_1/bin/crsctl stop crs
Stopping resources.
Successfully stopped CRS resources
Stopping CSSD.
Shutting down CSS daemon.
Shutdown request successfully issued.
[root@oradb27 bin]# /u01/app/oracle/product/10.2.0.5/crshome_1/install/root102.sh
Creating pre-patch directory for saving pre-patch clusterware files
Completed patching clusterware files to /u01/app/oracle/product/10.2.0.5/crshome_1
Relinking some shared libraries.
Relinking of patched files is complete.
WARNING: directory '/u01/app/oracle/product/10.2.0.5' is not owned by root
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
Preparing to recopy patched init and RC scripts.
Recopying init and RC scripts.
Startup will be queued to init within 30 seconds.
Starting up the CRS daemons.
Waiting for the patched CRS daemons to start.
This may take a while on some systems.
.
10205 patch successfully applied.
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
Successfully deleted 1 values from OCR.
Successfully deleted 1 keys from OCR.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node : <private interconnect name>
node 1: oradb27 oradb27-priv oradb27
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
clscfg -upgrade completed successfully
Creating '/u01/app/oracle/product/10.2.0.5/crshome_1/install/paramfile.crs' with data used for CRS configuration
Setting CRS configuration values in /u01/app/oracle/product/10.2.0.5/crshome_1/install/paramfile.crs
[root@oradb27 bin]# 节点2执行：
[root@oradb28 bin]# /u01/app/oracle/product/10.2.0.5/crshome_1/bin/crsctl stop crs
Stopping resources.
Successfully stopped CRS resources
Stopping CSSD.
Shutting down CSS daemon.
Shutdown request successfully issued.
[root@oradb28 bin]# /u01/app/oracle/product/10.2.0.5/crshome_1/install/root102.sh
Creating pre-patch directory for saving pre-patch clusterware files
Completed patching clusterware files to /u01/app/oracle/product/10.2.0.5/crshome_1
Relinking some shared libraries.
Relinking of patched files is complete.
WARNING: directory '/u01/app/oracle/product/10.2.0.5' is not owned by root
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
Preparing to recopy patched init and RC scripts.
Recopying init and RC scripts.
Startup will be queued to init within 30 seconds.
Starting up the CRS daemons.
Waiting for the patched CRS daemons to start.
This may take a while on some systems.
.
10205 patch successfully applied.
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
Successfully deleted 1 values from OCR.
Successfully deleted 1 keys from OCR.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node : <private interconnect name>
node 2: oradb28 oradb28-priv oradb28
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
clscfg -upgrade completed successfully
Creating '/u01/app/oracle/product/10.2.0.5/crshome_1/install/paramfile.crs' with data used for CRS configuration
Setting CRS configuration values in /u01/app/oracle/product/10.2.0.5/crshome_1/install/paramfile.crs
[root@oradb28 bin]# 升级成功，确认crs版本为10.2.0.5，集群状态正常：
[oracle@oradb27 bin]$ crsctl query crs activeversion
CRS active version on the cluster is [10.2.0.5.0]
[oracle@oradb28 ~]$ crsctl query crs activeversion
CRS active version on the cluster is [10.2.0.5.0]
[oracle@oradb27 ~]$ crs_stat -t -v
Name Type R/RA F/FT Target State Host
----------------------------------------------------------------------
ora....b27.gsd application 0/5 0/0 ONLINE ONLINE oradb27
ora....b27.ons application 0/3 0/0 ONLINE ONLINE oradb27
ora....b27.vip application 0/0 0/0 ONLINE ONLINE oradb27
ora....b28.gsd application 0/5 0/0 ONLINE ONLINE oradb28
ora....b28.ons application 0/3 0/0 ONLINE ONLINE oradb28
ora....b28.vip application 0/0 0/0 ONLINE ONLINE oradb28
[oracle@oradb27 ~]$ 至此，oracle clusterware安装（10.2.0.1）和升级（10.2.0.5）已完成。
Linux平台 Oracle 10gR2（10.2.0.5）RAC安装 Part3：db安装和升级
环境：OEL 5.7 + Oracle 10.2.0.5 RAC
5.安装Database软件
- 5.1 解压安装介质
- 5.2 开始安装db软件
- 5.3 root用户执行脚本
6.升级Database软件
- 6.1 升级db软件
- 6.2 root用户执行脚本
7.创建数据库
- 7.1 创建监听
- 7.2 创建ASM
- 7.3 创建数据库
Linux平台 Oracle 10gR2 RAC安装指导：
Part1：Linux平台 Oracle 10gR2（10.2.0.5）RAC安装 Part1：准备工作
Part2：Linux平台 Oracle 10gR2（10.2.0.5）RAC安装 Part2：clusterware安装和升级
Part3：Linux平台 Oracle 10gR2（10.2.0.5）RAC安装 Part3：db安装和升级
5.安装Database软件
5.1 解压安装介质
[oracle@oradb27 ~]$ cd /u01/media/
[oracle@oradb27 media]$ gunzip 10201_database_linux_x86_64.cpio.gz
[oracle@oradb27 media]$ cpio -idmv < 10201_database_linux_x86_64.cpio
[oracle@oradb27 media]$ cd database/
[oracle@oradb27 database]$ ls
doc install response runInstaller stage welcome.html
[oracle@oradb27 database]$ cd install/
[oracle@oradb27 install]$ ls
addLangs.sh addNode.sh images lsnodes oneclick.properties oraparam.ini oraparamsilent.ini resource response unzip
[oracle@oradb27 install]$ vi oraparam.ini
#找到“[Certified Versions]”这里，行尾添加RedHat-5，保存退出
[Certified Versions]
Linux=redhat-3,SUSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2,redhat-55.2 开始安装db软件
使用xquartz连接到节点1，开始调用图形安装db软件。
[oracle@oradb27 database]$ pwd
/u01/media/database
[oracle@oradb27 database]$ ls
doc install response runInstaller stage welcome.html
[oracle@oradb27 database]$ ./runInstaller 5.3 root用户执行脚本
root用户按照提示执行脚本@all nodes
/u01/app/oracle/product/10.2.0.5/dbhome_1/root.sh然后继续下一步，提示完成安装：
The following J2EE Applications have been deployed and are accessible at the URLs listed below.
iSQL*Plus URL:
http://oradb27:5561/isqlplus
iSQL*Plus DBA URL:
http://oradb27:5561/isqlplus/dba到这里，就完成db 10.2.0.1的软件安装。
6.升级Database软件
6.1 升级db软件
[oracle@oradb27 Disk1]$ pwd
/u01/media/Disk1
[oracle@oradb27 Disk1]$ ls
install patch_note.htm response runInstaller stage
[oracle@oradb27 Disk1]$ ./runInstaller 6.2 root用户执行脚本@all nodes
root用户执行脚本@all nodes
/u01/app/oracle/product/10.2.0.5/dbhome_1/root.sh执行完成后，返回图形界面完成安装：
The iSQL*Plus URL is:
http://oradb27:5560/isqlplus
The iSQL*Plus DBA URL is:
http://oradb27:5560/isqlplus/dba到这里，成功升级db软件到10.2.0.5版本。
7.创建数据库
7.1 创建监听
netca创建监听。
成功后查看集群资源，已经多了监听资源：
[oracle@oradb27 Disk1]$ crs_stat -t -v
Name Type R/RA F/FT Target State Host
----------------------------------------------------------------------
ora....27.lsnr application 0/5 0/0 ONLINE ONLINE oradb27
ora....b27.gsd application 0/5 0/0 ONLINE ONLINE oradb27
ora....b27.ons application 0/3 0/0 ONLINE ONLINE oradb27
ora....b27.vip application 0/0 0/0 ONLINE ONLINE oradb27
ora....28.lsnr application 0/5 0/0 ONLINE ONLINE oradb28
ora....b28.gsd application 0/5 0/0 ONLINE ONLINE oradb28
ora....b28.ons application 0/3 0/0 ONLINE ONLINE oradb28
ora....b28.vip application 0/0 0/0 ONLINE ONLINE oradb28
[oracle@oradb27 Disk1]$ 7.2 创建ASM
dbca 配置ASM磁盘组，添加DATA，FRA磁盘组。
配置ASM磁盘组的过程中会创建ASM实例，成功后，查看集群资源，已经多了asm实例资源：
[oracle@oradb27 Disk1]$ crs_stat -t -v
Name Type R/RA F/FT Target State Host
----------------------------------------------------------------------
ora....SM1.asm application 0/5 0/0 ONLINE ONLINE oradb27
ora....27.lsnr application 0/5 0/0 ONLINE ONLINE oradb27
ora....b27.gsd application 0/5 0/0 ONLINE ONLINE oradb27
ora....b27.ons application 0/3 0/0 ONLINE ONLINE oradb27
ora....b27.vip application 0/0 0/0 ONLINE ONLINE oradb27
ora....SM2.asm application 0/5 0/0 ONLINE ONLINE oradb28
ora....28.lsnr application 0/5 0/0 ONLINE ONLINE oradb28
ora....b28.gsd application 0/5 0/0 ONLINE ONLINE oradb28
ora....b28.ons application 0/3 0/0 ONLINE ONLINE oradb28
ora....b28.vip application 0/0 0/0 ONLINE ONLINE oradb28 7.3 创建数据库
dbca 创建数据库。
创建完成后，查看集群资源，多了数据库实例资源和数据库资源：
[oracle@oradb27 Disk1]$ crs_stat -t -v
Name Type R/RA F/FT Target State Host
----------------------------------------------------------------------
ora.jyrac.db application 0/0 0/1 ONLINE ONLINE oradb28
ora....c1.inst application 0/5 0/0 ONLINE ONLINE oradb27
ora....c2.inst application 0/5 0/0 ONLINE ONLINE oradb28
ora....SM1.asm application 0/5 0/0 ONLINE ONLINE oradb27
ora....27.lsnr application 0/5 0/0 ONLINE ONLINE oradb27
ora....b27.gsd application 0/5 0/0 ONLINE ONLINE oradb27
ora....b27.ons application 0/3 0/0 ONLINE ONLINE oradb27
ora....b27.vip application 0/0 0/0 ONLINE ONLINE oradb27
ora....SM2.asm application 0/5 0/0 ONLINE ONLINE oradb28
ora....28.lsnr application 0/5 0/0 ONLINE ONLINE oradb28
ora....b28.gsd application 0/5 0/0 ONLINE ONLINE oradb28
ora....b28.ons application 0/3 0/0 ONLINE ONLINE oradb28
ora....b28.vip application 0/0 0/0 ONLINE ONLINE oradb28
[oracle@oradb27 Disk1]$ 验证当前数据库版本和可用性：
[oracle@oradb27 Disk1]$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.5.0 - Production on Tue Jan 3 20:59:21 2017
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
SQL> select open_mode from v$database;
OPEN_MODE
----------
READ WRITE
SQL>
SQL> col comp_name for a45
SQL> set linesize 120
SQL> select comp_name, status, version from dba_registry;
COMP_NAME STATUS VERSION
--------------------------------------------- ---------------------- ------------------------------
Spatial VALID 10.2.0.5.0
Oracle interMedia VALID 10.2.0.5.0
OLAP Catalog VALID 10.2.0.5.0
Oracle Enterprise Manager VALID 10.2.0.5.0
Oracle XML Database VALID 10.2.0.5.0
Oracle Text VALID 10.2.0.5.0
Oracle Expression Filter VALID 10.2.0.5.0
Oracle Rules Manager VALID 10.2.0.5.0
Oracle Workspace Manager VALID 10.2.0.5.0
Oracle Data Mining VALID 10.2.0.5.0
Oracle Database Catalog Views VALID 10.2.0.5.0
COMP_NAME STATUS VERSION
--------------------------------------------- ---------------------- ------------------------------
Oracle Database Packages and Types VALID 10.2.0.5.0
JServer JAVA Virtual Machine VALID 10.2.0.5.0
Oracle XDK VALID 10.2.0.5.0
Oracle Database Java Packages VALID 10.2.0.5.0
OLAP Analytic Workspace VALID 10.2.0.5.0
Oracle OLAP API VALID 10.2.0.5.0
Oracle Real Application Clusters VALID 10.2.0.5.0
18 rows selected.至此，Linux平台 Oracle 10gR2（10.2.0.5）RAC安装系列已全部完成。