NS3安装命令

sudo apt-get install gcc g++ python              
sudo apt-get install gcc g++ python python-dev
sudo apt-get install mercurial
sudo apt-get install bzr
sudo apt-get install gdb valgrind
sudo apt-get install gsl-bin libgsl0-dev libgsl0ldbl
sudo apt-get install flex bison libfl-dev
sudo apt-get install g++ gcc
sudo apt-get install tcpdump
sudo apt-get install sqlite sqlite3 libsqlite3-dev
sudo apt-get install libxml2 libxml2-dev
sudo apt-get install libgtk2.0-0 libgtk2.0-dev
sudo apt-get install vtun lxc
sudo apt-get install uncrustify
sudo apt-get install doxygen graphviz imagemagick 
sudo apt-get install texlive texlive-extra-utils texlive-latex-extra
sudo apt-get install python-sphinx dia
sudo apt-get install python-pygraphviz python-kiwi python-pygoocanvas libgoocanvas-dev
sudo apt-get install libboost-signals-dev libboost-filesystem-dev
sudo apt-get install openmpi-bin openmpi-doc libopenmpi-dev
2.然后开始下载ns3.28
mkdir tarballs
cd tarballs
wget http://www.nsnam.org/release/ns-allinone-3.28.tar.bz2
tar xjf ns-allinone-3.28.tar.bz2
3.安装编译啦
cd ns-allinone-3.28
./build.py
cd ns-3.28
./waf distclean
CXXFLAGS="-Wall" ./waf configure --enable-examples --enable-tests
./waf build
4.测试
./test.py
5.跑个程序看看
./waf -run examples/aodv
完成！