LTE 信令流程Log 之 OAI eNB

最近在研究SDR LTE系统之间的互联互通,成功调通了Amari MME + OAI eNB + srsUE。不知道这些SDR LTE平台的可以参见我的博客http://blog.csdn.net/jxwxg/article/details/53026659。


调通之后,抓取了MME,eNB和UE侧的信令流程log,流程包括了eNB与MME的连接,UE随机接入,UE鉴权等过程。因为Log信息内容较多,本博客只显示OAI eNB侧的Log信息。Amari MME 的Log信息请查阅 http://blog.csdn.net/jxwxg/article/details/53999138  srsUE的Log信息请查看 http://blog.csdn.net/jxwxg/article/details/53999163 。


eNB

[MAC][I][l2_init] [MAIN] MAC_INIT_GLOBAL_PARAM IN...
[MAC][I][mac_init_global_param] [MAIN] CALLING RLC_MODULE_INIT...
[MAC][I][mac_init_global_param] [MAIN] RLC_MODULE_INIT OK, malloc16 for mac_rlc_xface...
[MAC][I][mac_init_global_param] [MAIN] malloc16 OK, mac_rlc_xface @ 0x16f11280
[MAC][I][mac_init_global_param] [MAIN] RLC interface setup and init
[PDCP][I]PDCP layer has been initialized
[MAC][I][mac_init_global_param] [MAIN] Init Global Param Done
[MAC][I][l2_init] [MAIN] init eNB MAC functions  
[MAC][I][l2_init] [MAIN] init UE MAC functions 
[MAC][I][l2_init] [MAIN] PHY Frame configuration 
[MAC][I][mac_top_init] [MAIN] Init function start:Nb_UE_INST=0
[MAC][I][mac_top_init] [MAIN] Init function start:Nb_eNB_INST=1
[MAC][I][mac_top_init] [MAIN] calling RRC
[RRC][I][eNB] handover active state is 0 
[MAC][I][mac_top_init] [MAIN][INIT] Init function finished
[SCTP][I][sctp_eNB_task] Starting SCTP layer
[S1AP][I][s1ap_eNB_task] Starting S1AP layer
[UDP][I]Initializing UDP task interface
[UDP][I]Initializing UDP task interface: DONE
[GTPV1U][I]Initializing GTPU stack 0xdfe460
ITTI tasks created
[MAC][I][mrbch_phy_sync_failure] [eNB 0] Frame 0: PHY Sync failure 
setup_eNB_buffers: frame_parms = 0x7ff83248c8e0
rxdata[0] @ 0x16f14b00 (0x16f14b00) (N_TA_OFFSET 0)
txdata[0] @ 0x16f5fb60
Setting eNB buffer to all-RX
[UDP][I]Initializing UDP for local address 127.0.0.1 with port 2152
[UDP][I]Inserting new descriptor for task 11, sd 45
[UDP][I]Initializing UDP for local address 127.0.0.1 with port 2152: DONE
Wait for the ITTI initialize message
[RRC][I][eNB 0] Received RRC_CONFIGURATION_REQ
[S1AP][I][s1ap_eNB_handle_register_eNB] Registered new eNB[0] and macro eNB id 3584
[SCTP][I][sctp_handle_new_association_req] sctp_bindx SCTP_BINDX_ADD_ADDR socket bound to : 127.0.0.1
[SCTP][I][sctp_handle_new_association_req] Converted ipv4 address 127.0.1.100 to network type
[SCTP][I][sctp_handle_new_association_req] connectx assoc_id  5 in progress..., used 1 addresses
[SCTP][I][sctp_handle_new_association_req] Inserted new descriptor for sd 46 in list, nb elements 1, assoc_id 5
[SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 46
[SCTP][I][sctp_eNB_read_from_socket] Received notification for sd 46, type 32769
[SCTP][I][sctp_eNB_read_from_socket] Client association changed: 0
[SCTP][I][sctp_get_peeraddresses] ----------------------
[SCTP][I][sctp_get_peeraddresses] Peer addresses:
[SCTP][I][sctp_get_peeraddresses]     - [127.0.1.100]
[SCTP][I][sctp_get_peeraddresses] ----------------------
[SCTP][I][sctp_get_sockinfo] ----------------------
[SCTP][I][sctp_get_sockinfo] SCTP Status:
[SCTP][I][sctp_get_sockinfo] assoc id .....: 5
[SCTP][I][sctp_get_sockinfo] state ........: 4
[SCTP][I][sctp_get_sockinfo] instrms ......: 2
[SCTP][I][sctp_get_sockinfo] outstrms .....: 2
[SCTP][I][sctp_get_sockinfo] fragmentation : 65487
[SCTP][I][sctp_get_sockinfo] pending data .: 0
[SCTP][I][sctp_get_sockinfo] unack data ...: 0
[SCTP][I][sctp_get_sockinfo] rwnd .........: 106496
[SCTP][I][sctp_get_sockinfo] peer info     :
[SCTP][I][sctp_get_sockinfo]     state ....: 2
[SCTP][I][sctp_get_sockinfo]     cwnd .....: 131070
[SCTP][I][sctp_get_sockinfo]     srtt .....: 0
[SCTP][I][sctp_get_sockinfo]     rto ......: 3000
[SCTP][I][sctp_get_sockinfo]     mtu ......: 65535
[SCTP][I][sctp_get_sockinfo] ----------------------
[SCTP][I][sctp_eNB_read_from_socket] Comm up notified for sd 46, assigned assoc_id 5
[S1AP][I][s1ap_eNB_generate_s1_setup_request] 3584 -> 00e000
[RRC][I][FRAME 00000][eNB][MOD 00][RNTI 0] Init...
[RRC][I][FRAME 00000][eNB][MOD 00][RNTI 0] Checking release 
[RRC][I][FRAME 00000][eNB][MOD 00][RNTI 0] Rel8 RRC
[SCTP][I][sctp_send_data] Successfully sent 59 bytes on stream 0 for assoc_id 5
[SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 46
[RRC][I][eNB 0] Configuration SIB2/3
[SCTP][I][sctp_eNB_read_from_socket] Received notification for sd 46, type 32777
[MAC][I][rrc_mac_config_req] [CONFIG][eNB 0/0] Configuring MAC/PHY
[MAC][I][rrc_mac_config_req] [CONFIG]SIB2/3 Contents (partial)
[MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.n_SB = 1
[MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.hoppingMode = 0
[MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.pusch_HoppingOffset = 0
[MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.enable64QAM = 0
[MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.groupHoppingEnabled = 1
[MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.groupAssignmentPUSCH = 0
[MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.sequenceHoppingEnabled = 0
[MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.cyclicShift  = 1
[RRC][I][FRAME 00000][eNB][MOD 00][RNTI 0] OPENAIR RRC IN....
[SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 46
[SCTP][I][sctp_eNB_read_from_socket] [5][46] Msg of length 27 received from port 36412, on stream 0, PPID 18
[S1AP][I][s1ap_decode_s1ap_s1setupresponseies] Decoding message S1ap_S1SetupResponseIEs (/home/wspn/oai/oma/openairinterface5g/cmake_targets/lte_build_oai/build/CMakeFiles/R10.5/s1ap_decoder.c:3544)
[S1AP][I][s1ap_eNB_handle_s1_setup_response] servedGUMMEIs.list.count 1
[S1AP][I][s1ap_eNB_handle_s1_setup_response] servedPLMNs.list.count 1
[ENB_APP][I][eNB_app_task] [eNB 0] Received S1AP_REGISTER_ENB_CNF: associated MME 1
Scope thread has priority 2
Scope thread created, ret=0
Setting eNB_thread FIFO scheduling policy with priority 99 
Setting OS scheduler to SCHED_FIFO for eNB [cc0][thread0] 
[HW][I][SCHED][eNB] TX thread 0 started on CPU 3 TID 2351
[HW][I][SCHED][eNB] RX thread 0 started on CPU 0 TID 2352
Setting OS scheduler to SCHED_FIFO for eNB [cc0][thread1] 
[HW][I][SCHED][eNB] TX thread 1 started on CPU 3 TID 2353
[HW][I][SCHED][eNB] RX thread 1 started on CPU 2 TID 2354
Setting OS scheduler to SCHED_FIFO for eNB [cc0][thread2] 
[HW][I][SCHED][eNB] TX thread 2 started on CPU 2 TID 2355
[HW][I][SCHED][eNB] RX thread 2 started on CPU 1 TID 2356
Setting OS scheduler to SCHED_FIFO for eNB [cc0][thread3] 
[HW][I][SCHED][eNB] TX thread 3 started on CPU 2 TID 2357
[HW][I][SCHED][eNB] RX thread 3 started on CPU 2 TID 2358
Setting OS scheduler to SCHED_FIFO for eNB [cc0][thread4] 
[HW][I][SCHED][eNB] TX thread 4 started on CPU 3 TID 2359
[HW][I][SCHED][eNB] RX thread 4 started on CPU 3 TID 2360
Setting OS scheduler to SCHED_FIFO for eNB [cc0][thread5] 
[HW][I][SCHED][eNB] TX thread 5 started on CPU 2 TID 2361
[HW][I][SCHED][eNB] RX thread 5 started on CPU 2 TID 2362
Setting OS scheduler to SCHED_FIFO for eNB [cc0][thread6] 
[HW][I][SCHED][eNB] TX thread 6 started on CPU 3 TID 2363
[HW][I][SCHED][eNB] RX thread 6 started on CPU 3 TID 2364
Setting OS scheduler to SCHED_FIFO for eNB [cc0][thread7] 
[HW][I][SCHED][eNB] TX thread 7 started on CPU 2 TID 2365
[HW][I][SCHED][eNB] RX thread 7 started on CPU 2 TID 2366
Setting OS scheduler to SCHED_FIFO for eNB [cc0][thread8] 
[HW][I][SCHED][eNB] TX thread 8 started on CPU 1 TID 2367
[HW][I][SCHED][eNB] RX thread 8 started on CPU 1 TID 2368
Setting OS scheduler to SCHED_FIFO for eNB [cc0][thread9] 
[HW][I][SCHED][eNB] TX thread 9 started on CPU 1 TID 2369
[HW][I][SCHED][eNB] RX thread 9 started on CPU 1 TID 2370
Creating main eNB_thread 
[SCHED][eNB] Started eNB main thread on CPU 0 TID 2371
eNB_thread: mlockall in ...
eNB_thread: mlockall out ...
waiting for sync (eNB_thread)
Sending sync to all threads
TYPE  TO TERMINATE
Entering ITTI signals handler
got sync (eNB_thread)
[PHY][I][eNB 0/0][RAPROC] Frame 122, subframe 1 Initiating RA procedure (UE_id 0) with preamble 1, energy 85.8 dB, delay 30
[MAC][I][initiate_ra_proc] [eNB 0][RAPROC] CC_id 0 Frame 122 Initiating RA procedure for preamble index 1
[MAC][I][fill_rar] [eNB 0][RAPROC] CC_id 0 Frame 122 Generating RAR (41|00.10.03.4c.8c.71) for ra_idx 0, CRNTI 8c71,preamble 1/1,TIMING OFFSET 7
[PHY][I]UE_id 0 associated with rnti 8c71
[PHY][I]Initializing Po_PUCCH: p0_NominalPUCCH -96, gain 115 => 79
[PHY][I][eNB][RAPROC] generate_eNB_ulsch_params_from_rar: subframe 5 (harq_pid 7)
[PHY][I][eNB][RAPROC] Frame 122 subframe 5, Activated Msg3 demodulation for UE 0 in frame 123, subframe 1
[PHY][I][eNB 0][PUSCH 7] Frame 123 subframe 1 ULSCH received, setting round to 0, PHICH ACK
[PHY][I][eNB 0][PUSCH 7] frame 123 subframe 1 RNTI 8c71 RX power (72,0) RSSI (0,0) N0 (23,0) dB ACK (0,0), decoding iter 2
[PHY][I][eNB 0][RAPROC] Frame 123 Terminating ra_proc for harq 7, UE 0
[MAC][I][rx_sdu] [eNB 0][RAPROC] CC_id 0 Frame 123, Received CCCH:  50.0.0.0.3e.86, Terminating RA procedure for UE rnti 8c71
[MAC][I][rx_sdu] [eNB 0][RAPROC] CC_id 0 Frame 123 CCCH: Received Msg3: length 6, offset 7
[MAC][I][rx_sdu] [eNB 0][RAPROC] CC_id 0 Frame 123 Added user with rnti 8c71 => UE 0
[RRC][I][FRAME 01198][eNB][MOD 00][RNTI 8c71] Received RRC_MAC_CCCH_DATA_IND
[RRC][I][FRAME 01198][eNB][MOD 00][RNTI 8c71] Accept new connection from UE random UE identity (0xe803000000000000) MME code 0 TMSI 0 cause 3
[MAC][I][rrc_mac_config_req] [CONFIG][eNB 0/0] Configuring MAC/PHY for UE 0 (8c71)
[PHY][I]phy_config_dedicated_eNB: physicalConfigDedicated=0x7ff800001340
[RRC][I][FRAME 01198][eNB][MOD 00][RNTI 8c71] [RAPROC] Logical Channel DL-CCCH, Generating RRCConnectionSetup (bytes 25)
[RRC][I][FRAME 01198][eNB][MOD 00][RNTI 8c71]CALLING RLC CONFIG SRB1 (rbid 1)
[RLC][I][FRAME 01198][eNB][MOD 00][RNTI 8c71] [SRB 1] rrc_rlc_add_rlc  SRB
[RLC][I][FRAME 01198][eNB][MOD 00][RNTI 8c71][SRB AM 01][CONFIGURE] max_retx_threshold 4 poll_pdu 4 poll_byte 10000 t_poll_retransmit 80 t_reordering 35 t_status_prohibit 0
[PHY][I][eNB 0] Frame 124: Sent physicalConfigDedicated=0x7ff800001340 for UE 0
[MAC][I][schedule_RA] [eNB 0][RAPROC] CC_id 0 Frame 123, subframeP 5: Generating Msg4 with RRC Piggyback (RA proc 0, RNTI 8c71)
[MAC][I][schedule_RA] [eNB 0][RAPROC] CC_id 0 Frame 123 subframeP 5 Msg4 : TBS 41, sdu_len 25, msg4_header 8, msg4_padding 0, msg4_post_padding 7
[MAC][I][schedule_RA] [eNB 0][RAPROC] CC_id 0 Frame 124, subframeP 0: Checking if Msg4 was acknowledged: 
[MAC][I][schedule_RA] [eNB 0][RAPROC] CC_id 0 Frame 124, subframeP 0 : Msg4 acknowledged
[34m[RRC][N][eNB 0] Frame 124: received a DCCH 1 message on SRB 0 with Size 24 from UE 8c71
[0m[RRC][I][FRAME 01199][eNB][MOD 00][RNTI 8c71] Received on DCCH 1 RRC_DCCH_DATA_IND
[RRC][I][FRAME 01199][eNB][MOD 00][RNTI 8c71] [RAPROC] Logical Channel UL-DCCH, processing RRCConnectionSetupComplete from UE
[RRC][I][FRAME 01199][eNB][MOD 00][RNTI 8c71] UE State = RRC_CONNECTED 
[S1AP][I][s1ap_eNB_handle_nas_first_req] Found usable eNB_ue_s1ap_id: 0x06692d 420141(10)
[SCTP][I][sctp_send_data] Successfully sent 68 bytes on stream 1 for assoc_id 5
[SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 46
[SCTP][I][sctp_eNB_read_from_socket] Received notification for sd 46, type 32777
[SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 46
[SCTP][I][sctp_eNB_read_from_socket] [5][46] Msg of length 62 received from port 36412, on stream 1, PPID 18
[S1AP][I][s1ap_decode_s1ap_downlinknastransporties] Decoding message S1ap_DownlinkNASTransportIEs (/home/wspn/oai/oma/openairinterface5g/cmake_targets/lte_build_oai/build/CMakeFiles/R10.5/s1ap_decoder.c:3159)
[RRC][I][eNB 0] Received S1AP_DOWNLINK_NAS: ue_initial_id 1, eNB_ue_s1ap_id 420141
[RLC][I][FRAME 00000][eNB][MOD 00][RNTI 8c71][SRB AM 01] RLC_AM_DATA_REQ size 44 Bytes,  NB SDU 1 current_sdu_index=0 next_sdu_index=1 conf 0 mui 0
[34m[RRC][N][eNB 0] Frame 125: received a DCCH 1 message on SRB 0 with Size 14 from UE 8c71
[0m[RRC][I][FRAME 01200][eNB][MOD 00][RNTI 8c71] Received on DCCH 1 RRC_DCCH_DATA_IND
[SCTP][I][sctp_send_data] Successfully sent 59 bytes on stream 1 for assoc_id 5
[SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 46
[SCTP][I][sctp_eNB_read_from_socket] Received notification for sd 46, type 32777
[SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 46
[SCTP][I][sctp_eNB_read_from_socket] [5][46] Msg of length 40 received from port 36412, on stream 1, PPID 18
[S1AP][I][s1ap_decode_s1ap_downlinknastransporties] Decoding message S1ap_DownlinkNASTransportIEs (/home/wspn/oai/oma/openairinterface5g/cmake_targets/lte_build_oai/build/CMakeFiles/R10.5/s1ap_decoder.c:3159)
[RRC][I][eNB 0] Received S1AP_DOWNLINK_NAS: ue_initial_id 1, eNB_ue_s1ap_id 420141
[RLC][I][FRAME 00000][eNB][MOD 00][RNTI 8c71][SRB AM 01] RLC_AM_DATA_REQ size 22 Bytes,  NB SDU 1 current_sdu_index=1 next_sdu_index=2 conf 0 mui 0
[34m[RRC][N][eNB 0] Frame 126: received a DCCH 1 message on SRB 0 with Size 22 from UE 8c71
[0m[RRC][I][FRAME 01201][eNB][MOD 00][RNTI 8c71] Received on DCCH 1 RRC_DCCH_DATA_IND
[SCTP][I][sctp_send_data] Successfully sent 67 bytes on stream 1 for assoc_id 5
[SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 46
[SCTP][I][sctp_eNB_read_from_socket] Received notification for sd 46, type 32777
[SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 46
[SCTP][I][sctp_eNB_read_from_socket] [5][46] Msg of length 160 received from port 36412, on stream 1, PPID 18
[S1AP][I][s1ap_decode_s1ap_initialcontextsetuprequesties] Decoding message S1ap_InitialContextSetupRequestIEs (/home/wspn/oai/oma/openairinterface5g/cmake_targets/lte_build_oai/build/CMakeFiles/R10.5/s1ap_decoder.c:1012)
[RRC][I][eNB 0] Received S1AP_INITIAL_CONTEXT_SETUP_REQ: ue_initial_id 1, eNB_ue_s1ap_id 420141, nb_of_e_rabs 1
[RRC][I][eNB 0][UE 8c71] Selected security algorithms (14006b80): 0, 2, changed
[RRC][I][eNB 0][UE 8c71] Saved security key 36B5560C498778E22BDE83792DEF2D7A7CB4C02E261F57EB475060282CA7477A

KeNB:36b5560c498778e22bde83792def2d7a7cb4c02e261f57eb475060282ca7477a

KRRCenc:9376dd823ae9d7dfe3248bbfee05c163d14fd9a888f29d916d0a38c177c0f651

KRRCint:c855a534df8a552e2e2d55b218a5d5aa2a8b6b1de5257dc85c323645899b28ca
[RRC][I][FRAME 00000][eNB][MOD 00][RNTI 8c71] Logical Channel DL-DCCH, Generate SecurityModeCommand (bytes 3)
[RLC][I][FRAME 00000][eNB][MOD 00][RNTI 8c71][SRB AM 01] RLC_AM_DATA_REQ size 8 Bytes,  NB SDU 1 current_sdu_index=2 next_sdu_index=3 conf 0 mui 0
[34m[RRC][N][eNB 0] Frame 127: received a DCCH 1 message on SRB 0 with Size 2 from UE 8c71
[0m[RRC][I][FRAME 01202][eNB][MOD 00][RNTI 8c71] Received on DCCH 1 RRC_DCCH_DATA_IND
[RRC][I][FRAME 01202][eNB][MOD 00][RNTI 8c71] received securityModeComplete on UL-DCCH 1 from UE
[RRC][I][FRAME 01202][eNB][MOD 00][RNTI 8c71] Logical Channel DL-DCCH, Generate UECapabilityEnquiry (bytes 3)
[RLC][I][FRAME 01202][eNB][MOD 00][RNTI 8c71][SRB AM 01] RLC_AM_DATA_REQ size 8 Bytes,  NB SDU 1 current_sdu_index=3 next_sdu_index=4 conf 0 mui 1
[34m[RRC][N][eNB 0] Frame 128: received a DCCH 1 message on SRB 0 with Size 20 from UE 8c71
[0m[RRC][I][FRAME 01203][eNB][MOD 00][RNTI 8c71] Received on DCCH 1 RRC_DCCH_DATA_IND
[RRC][I][FRAME 01203][eNB][MOD 00][RNTI 8c71] received ueCapabilityInformation on UL-DCCH 1 from UE

    
    4
    
        
            
            
            
            
            
            
            
            
            
        
        
    
    
        
        
    
    
        
            
                3
                
            
            
                7
                
            
            
                20
                
            
        
    
    
        
            
                
                    
                        
                    
                    
                        
                    
                    
                        
                    
                
            
            
                
                    
                        
                    
                    
                        
                    
                    
                        
                    
                
            
            
                
                    
                        
                    
                    
                        
                    
                    
                        
                    
                
            
        
    
    
        01100010000000000001000000000000
    
    
    

[RRC][I]RRCConnectionReconfiguration Encoded 564 bits (71 bytes)
[RRC][I][eNB 0] Frame 1203, Logical Channel DL-DCCH, Generate RRCConnectionReconfiguration (bytes 71, UE id 8c71)
[SCTP][I][sctp_send_data] Successfully sent 42 bytes on stream 1 for assoc_id 5
[RLC][I][FRAME 01203][eNB][MOD 00][RNTI 8c71][SRB AM 01] RLC_AM_DATA_REQ size 76 Bytes,  NB SDU 1 current_sdu_index=4 next_sdu_index=5 conf 0 mui 2
[34m[RRC][N][eNB 0] Frame 129: received a DCCH 1 message on SRB 0 with Size 2 from UE 8c71
[0m[RRC][I][FRAME 01204][eNB][MOD 00][RNTI 8c71] Received on DCCH 1 RRC_DCCH_DATA_IND
[34m[RRC][N][eNB 0] Frame 129: received a DCCH 1 message on SRB 0 with Size 16 from UE 8c71
[0m[RLC][I][FRAME 01204][eNB][MOD 00][RNTI 8c71] [DRB 1] rrc_rlc_add_rlc  DRB
[RRC][I][eNB 0] Frame  1204 : Logical Channel UL-DCCH, Received RRCConnectionReconfigurationComplete from UE rnti 8c71, reconfiguring DRB 1/LCID 3
[RRC][I][eNB 0] Frame  1204 : Logical Channel UL-DCCH, Received RRCConnectionReconfigurationComplete from UE 0, reconfiguring DRB 1/LCID 3
[MAC][I][rrc_mac_config_req] [CONFIG][eNB 0/0] Configuring MAC/PHY for UE 0 (8c71)
[PHY][I]phy_config_dedicated_eNB: physicalConfigDedicated=0x7ff800001340
[RRC][I][FRAME 01204][eNB][MOD 00][RNTI 8c71] UE State = RRC_RECONFIGURED 
[RRC][I][FRAME 01204][eNB][MOD 00][RNTI 8c71] Received on DCCH 1 RRC_DCCH_DATA_IND
[SCTP][I][sctp_send_data] Successfully sent 40 bytes on stream 1 for assoc_id 5
[SCTP][I][sctp_send_data] Successfully sent 61 bytes on stream 1 for assoc_id 5
[PHY][I][eNB 0] Frame 130: Sent physicalConfigDedicated=0x7ff800001340 for UE 0
[SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 46
[SCTP][I][sctp_eNB_read_from_socket] Received notification for sd 46, type 32777
[PHY][I][eNB 0/0][RAPROC] Frame 296, subframe 1 Initiating RA procedure (UE_id 1) with preamble 6, energy 75.0 dB, delay 0
[MAC][I][initiate_ra_proc] [eNB 0][RAPROC] CC_id 0 Frame 296 Initiating RA procedure for preamble index 6
[MAC][I][fill_rar] [eNB 0][RAPROC] CC_id 0 Frame 296 Generating RAR (46|00.00.03.4c.09.c6) for ra_idx 0, CRNTI 9c6,preamble 6/6,TIMING OFFSET 0
[PHY][I]UE_id 1 associated with rnti 9c6
[PHY][I]Initializing Po_PUCCH: p0_NominalPUCCH -96, gain 115 => 79
[PHY][I][eNB][RAPROC] generate_eNB_ulsch_params_from_rar: subframe 5 (harq_pid 3)
[PHY][I][eNB][RAPROC] Frame 296 subframe 5, Activated Msg3 demodulation for UE 1 in frame 297, subframe 1
[PHY][I][eNB 0/0][RAPROC] frame 297, subframe 1, UE 1: Error receiving ULSCH (Msg3), round 0/3
[PHY][I][eNB 0][PUSCH 3] frame 297 subframe 1 RNTI 9c6 RX power (62,0) RSSI (0,0) N0 (54,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 297, Subframe 1: Msg3 in error, i = 1 
[0m[PHY][I][eNB 0/0][RAPROC] frame 297, subframe 9, UE 1: Error receiving ULSCH (Msg3), round 1/3
[PHY][I][eNB 0][PUSCH 3] frame 297 subframe 9 RNTI 9c6 RX power (62,0) RSSI (0,0) N0 (54,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 297, Subframe 9: Msg3 in error, i = 1 
[0m[PHY][I][eNB 0/0][RAPROC] Frame 298, subframe 1 Initiating RA procedure (UE_id 2) with preamble 32, energy 76.7 dB, delay 60
[MAC][I][initiate_ra_proc] [eNB 0][RAPROC] CC_id 0 Frame 298 Initiating RA procedure for preamble index 32
[MAC][I][fill_rar] [eNB 0][RAPROC] CC_id 0 Frame 298 Generating RAR (60|00.30.03.4c.69.b7) for ra_idx 1, CRNTI 69b7,preamble 32/6,TIMING OFFSET 15
[PHY][I]UE_id 2 associated with rnti 69b7
[PHY][I]Initializing Po_PUCCH: p0_NominalPUCCH -96, gain 115 => 79
[PHY][I][eNB][RAPROC] generate_eNB_ulsch_params_from_rar: subframe 5 (harq_pid 7)
[PHY][I][eNB][RAPROC] Frame 298 subframe 5, Activated Msg3 demodulation for UE 2 in frame 299, subframe 1
[PHY][I][eNB 0/0][RAPROC] frame 298, subframe 7, UE 1: Error receiving ULSCH (Msg3), round 2/3
[PHY][I][eNB 0][PUSCH 3] frame 298 subframe 7 RNTI 9c6 RX power (62,0) RSSI (0,0) N0 (53,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 298, Subframe 7: Msg3 in error, i = 1 
[0m[PHY][I][eNB 0/0][RAPROC] frame 299, subframe 1, UE 2: Error receiving ULSCH (Msg3), round 0/3
[PHY][I][eNB 0][PUSCH 7] frame 299 subframe 1 RNTI 69b7 RX power (22,0) RSSI (0,0) N0 (53,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 299, Subframe 1: Msg3 in error, i = 2 
[0m[PHY][I][eNB 0/0][RAPROC] frame 299, subframe 5, UE 1: Error receiving ULSCH (Msg3), round 3/3
[PHY][I][eNB 0][PUSCH 3] frame 299 subframe 5 RNTI 9c6 RX power (24,0) RSSI (0,0) N0 (24,0) dB ACK (0,0), decoding iter 5
[PHY][I][eNB 0][RAPROC] maxHARQ_Msg3Tx reached, abandoning RA procedure for UE 1
[MAC][I][cancel_ra_proc] [eNB 0][RAPROC] CC_id 0 Frame 299 Cancelling RA procedure for UE rnti 9c6
[93m[PHY][W][eNB] Frame 299, Subframe 5: Msg3 in error, i = 1 
[0m[PHY][I][eNB 0/0][RAPROC] frame 299, subframe 9, UE 2: Error receiving ULSCH (Msg3), round 1/3
[PHY][I][eNB 0][PUSCH 7] frame 299 subframe 9 RNTI 69b7 RX power (62,0) RSSI (0,0) N0 (24,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 299, Subframe 9: Msg3 in error, i = 2 
[0m[PHY][I][eNB 0/0][RAPROC] frame 300, subframe 7, UE 2: Error receiving ULSCH (Msg3), round 2/3
[PHY][I][eNB 0][PUSCH 7] frame 300 subframe 7 RNTI 69b7 RX power (62,0) RSSI (0,0) N0 (23,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 300, Subframe 7: Msg3 in error, i = 2 
[0m[PHY][I][eNB 0/0][RAPROC] frame 301, subframe 5, UE 2: Error receiving ULSCH (Msg3), round 3/3
[PHY][I][eNB 0][PUSCH 7] frame 301 subframe 5 RNTI 69b7 RX power (63,0) RSSI (0,0) N0 (24,0) dB ACK (0,0), decoding iter 5
[PHY][I][eNB 0][RAPROC] maxHARQ_Msg3Tx reached, abandoning RA procedure for UE 2
[MAC][I][cancel_ra_proc] [eNB 0][RAPROC] CC_id 0 Frame 301 Cancelling RA procedure for UE rnti 69b7
[93m[PHY][W][eNB] Frame 301, Subframe 5: Msg3 in error, i = 2 
[0m[PHY][I][eNB 0/0][RAPROC] Frame 526, subframe 1 Initiating RA procedure (UE_id 1) with preamble 6, energy 75.0 dB, delay 0
[MAC][I][initiate_ra_proc] [eNB 0][RAPROC] CC_id 0 Frame 526 Initiating RA procedure for preamble index 6
[MAC][I][fill_rar] [eNB 0][RAPROC] CC_id 0 Frame 526 Generating RAR (46|00.00.03.4c.8a.57) for ra_idx 0, CRNTI 8a57,preamble 6/6,TIMING OFFSET 0
[PHY][I]UE_id 1 associated with rnti 8a57
[PHY][I]Initializing Po_PUCCH: p0_NominalPUCCH -96, gain 115 => 79
[PHY][I][eNB][RAPROC] generate_eNB_ulsch_params_from_rar: subframe 5 (harq_pid 7)
[PHY][I][eNB][RAPROC] Frame 526 subframe 5, Activated Msg3 demodulation for UE 1 in frame 527, subframe 1
[PHY][I][eNB 0/0][RAPROC] frame 527, subframe 1, UE 1: Error receiving ULSCH (Msg3), round 0/3
[PHY][I][eNB 0][PUSCH 7] frame 527 subframe 1 RNTI 8a57 RX power (62,0) RSSI (0,0) N0 (54,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 527, Subframe 1: Msg3 in error, i = 1 
[0m[PHY][I][eNB 0/0][RAPROC] frame 527, subframe 9, UE 1: Error receiving ULSCH (Msg3), round 1/3
[PHY][I][eNB 0][PUSCH 7] frame 527 subframe 9 RNTI 8a57 RX power (58,0) RSSI (0,0) N0 (54,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 527, Subframe 9: Msg3 in error, i = 1 
[0m[PHY][I][eNB 0/0][RAPROC] Frame 528, subframe 1 Initiating RA procedure (UE_id 2) with preamble 32, energy 76.7 dB, delay 60
[MAC][I][initiate_ra_proc] [eNB 0][RAPROC] CC_id 0 Frame 528 Initiating RA procedure for preamble index 32
[MAC][I][fill_rar] [eNB 0][RAPROC] CC_id 0 Frame 528 Generating RAR (60|00.30.03.4c.6a.db) for ra_idx 1, CRNTI 6adb,preamble 32/6,TIMING OFFSET 15
[PHY][I]UE_id 2 associated with rnti 6adb
[PHY][I]Initializing Po_PUCCH: p0_NominalPUCCH -96, gain 115 => 79
[PHY][I][eNB][RAPROC] generate_eNB_ulsch_params_from_rar: subframe 5 (harq_pid 3)
[PHY][I][eNB][RAPROC] Frame 528 subframe 5, Activated Msg3 demodulation for UE 2 in frame 529, subframe 1
[PHY][I][eNB 0/0][RAPROC] frame 528, subframe 7, UE 1: Error receiving ULSCH (Msg3), round 2/3
[PHY][I][eNB 0][PUSCH 7] frame 528 subframe 7 RNTI 8a57 RX power (62,0) RSSI (0,0) N0 (53,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 528, Subframe 7: Msg3 in error, i = 1 
[0m[PHY][I][eNB 0/0][RAPROC] frame 529, subframe 1, UE 2: Error receiving ULSCH (Msg3), round 0/3
[PHY][I][eNB 0][PUSCH 3] frame 529 subframe 1 RNTI 6adb RX power (62,0) RSSI (0,0) N0 (53,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 529, Subframe 1: Msg3 in error, i = 2 
[0m[PHY][I][eNB 0/0][RAPROC] frame 529, subframe 5, UE 1: Error receiving ULSCH (Msg3), round 3/3
[PHY][I][eNB 0][PUSCH 7] frame 529 subframe 5 RNTI 8a57 RX power (24,0) RSSI (0,0) N0 (53,0) dB ACK (0,0), decoding iter 5
[PHY][I][eNB 0][RAPROC] maxHARQ_Msg3Tx reached, abandoning RA procedure for UE 1
[MAC][I][cancel_ra_proc] [eNB 0][RAPROC] CC_id 0 Frame 529 Cancelling RA procedure for UE rnti 8a57
[93m[PHY][W][eNB] Frame 529, Subframe 5: Msg3 in error, i = 1 
[0m[PHY][I][eNB 0/0][RAPROC] frame 529, subframe 9, UE 2: Error receiving ULSCH (Msg3), round 1/3
[PHY][I][eNB 0][PUSCH 3] frame 529 subframe 9 RNTI 6adb RX power (62,0) RSSI (0,0) N0 (53,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 529, Subframe 9: Msg3 in error, i = 2 
[0m[PHY][I][eNB 0/0][RAPROC] frame 530, subframe 7, UE 2: Error receiving ULSCH (Msg3), round 2/3
[PHY][I][eNB 0][PUSCH 3] frame 530 subframe 7 RNTI 6adb RX power (62,0) RSSI (0,0) N0 (23,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 530, Subframe 7: Msg3 in error, i = 2 
[0m[PHY][I][eNB 0/0][RAPROC] frame 531, subframe 5, UE 2: Error receiving ULSCH (Msg3), round 3/3
[PHY][I][eNB 0][PUSCH 3] frame 531 subframe 5 RNTI 6adb RX power (63,0) RSSI (0,0) N0 (23,0) dB ACK (0,0), decoding iter 5
[PHY][I][eNB 0][RAPROC] maxHARQ_Msg3Tx reached, abandoning RA procedure for UE 2
[MAC][I][cancel_ra_proc] [eNB 0][RAPROC] CC_id 0 Frame 531 Cancelling RA procedure for UE rnti 6adb
[93m[PHY][W][eNB] Frame 531, Subframe 5: Msg3 in error, i = 2 
[0m[PHY][I][eNB 0/0][RAPROC] Frame 1012, subframe 1 Initiating RA procedure (UE_id 1) with preamble 15, energy 75.0 dB, delay 72
[MAC][I][initiate_ra_proc] [eNB 0][RAPROC] CC_id 0 Frame 1012 Initiating RA procedure for preamble index 15
[MAC][I][fill_rar] [eNB 0][RAPROC] CC_id 0 Frame 1012 Generating RAR (4f|00.40.03.4c.dc.ae) for ra_idx 0, CRNTI dcae,preamble 15/15,TIMING OFFSET 18
[PHY][I]UE_id 1 associated with rnti dcae
[PHY][I]Initializing Po_PUCCH: p0_NominalPUCCH -96, gain 115 => 79
[PHY][I][eNB][RAPROC] generate_eNB_ulsch_params_from_rar: subframe 5 (harq_pid 3)
[PHY][I][eNB][RAPROC] Frame 1012 subframe 5, Activated Msg3 demodulation for UE 1 in frame 1013, subframe 1
[PHY][I][eNB 0/0][RAPROC] frame 1013, subframe 1, UE 1: Error receiving ULSCH (Msg3), round 0/3
[PHY][I][eNB 0][PUSCH 3] frame 1013 subframe 1 RNTI dcae RX power (61,0) RSSI (0,0) N0 (53,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 1013, Subframe 1: Msg3 in error, i = 1 
[0m[PHY][I][eNB 0/0][RAPROC] frame 1013, subframe 9, UE 1: Error receiving ULSCH (Msg3), round 1/3
[PHY][I][eNB 0][PUSCH 3] frame 1013 subframe 9 RNTI dcae RX power (61,0) RSSI (0,0) N0 (51,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 1013, Subframe 9: Msg3 in error, i = 1 
[0m[PHY][I][eNB 0/0][RAPROC] frame 1014, subframe 7, UE 1: Error receiving ULSCH (Msg3), round 2/3
[PHY][I][eNB 0][PUSCH 3] frame 1014 subframe 7 RNTI dcae RX power (24,0) RSSI (0,0) N0 (24,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 1014, Subframe 7: Msg3 in error, i = 1 
[0m[PHY][I][eNB 0/0][RAPROC] frame 1015, subframe 5, UE 1: Error receiving ULSCH (Msg3), round 3/3
[PHY][I][eNB 0][PUSCH 3] frame 1015 subframe 5 RNTI dcae RX power (24,0) RSSI (0,0) N0 (24,0) dB ACK (0,0), decoding iter 5
[PHY][I][eNB 0][RAPROC] maxHARQ_Msg3Tx reached, abandoning RA procedure for UE 1
[MAC][I][cancel_ra_proc] [eNB 0][RAPROC] CC_id 0 Frame 1015 Cancelling RA procedure for UE rnti dcae
[93m[PHY][W][eNB] Frame 1015, Subframe 5: Msg3 in error, i = 1 
[0m[PHY][I][eNB 0/0][RAPROC] Frame 212, subframe 1 Initiating RA procedure (UE_id 1) with preamble 6, energy 75.0 dB, delay 0
[MAC][I][initiate_ra_proc] [eNB 0][RAPROC] CC_id 0 Frame 212 Initiating RA procedure for preamble index 6
[MAC][I][fill_rar] [eNB 0][RAPROC] CC_id 0 Frame 212 Generating RAR (46|00.00.03.4c.4c.11) for ra_idx 0, CRNTI 4c11,preamble 6/6,TIMING OFFSET 0
[PHY][I]UE_id 1 associated with rnti 4c11
[PHY][I]Initializing Po_PUCCH: p0_NominalPUCCH -96, gain 115 => 79
[PHY][I][eNB][RAPROC] generate_eNB_ulsch_params_from_rar: subframe 5 (harq_pid 3)
[PHY][I][eNB][RAPROC] Frame 212 subframe 5, Activated Msg3 demodulation for UE 1 in frame 213, subframe 1
[PHY][I][eNB 0/0][RAPROC] frame 213, subframe 1, UE 1: Error receiving ULSCH (Msg3), round 0/3
[PHY][I][eNB 0][PUSCH 3] frame 213 subframe 1 RNTI 4c11 RX power (63,0) RSSI (0,0) N0 (54,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 213, Subframe 1: Msg3 in error, i = 1 
[0m[PHY][I][eNB 0/0][RAPROC] frame 213, subframe 9, UE 1: Error receiving ULSCH (Msg3), round 1/3
[PHY][I][eNB 0][PUSCH 3] frame 213 subframe 9 RNTI 4c11 RX power (62,0) RSSI (0,0) N0 (54,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 213, Subframe 9: Msg3 in error, i = 1 
[0m[PHY][I][eNB 0/0][RAPROC] Frame 214, subframe 1 Initiating RA procedure (UE_id 2) with preamble 26, energy 76.7 dB, delay 30
[MAC][I][initiate_ra_proc] [eNB 0][RAPROC] CC_id 0 Frame 214 Initiating RA procedure for preamble index 26
[MAC][I][fill_rar] [eNB 0][RAPROC] CC_id 0 Frame 214 Generating RAR (5a|00.10.03.4c.81.b3) for ra_idx 1, CRNTI 81b3,preamble 26/6,TIMING OFFSET 7
[PHY][I]UE_id 2 associated with rnti 81b3
[PHY][I]Initializing Po_PUCCH: p0_NominalPUCCH -96, gain 115 => 79
[PHY][I][eNB][RAPROC] generate_eNB_ulsch_params_from_rar: subframe 5 (harq_pid 7)
[PHY][I][eNB][RAPROC] Frame 214 subframe 5, Activated Msg3 demodulation for UE 2 in frame 215, subframe 1
[PHY][I][eNB 0/0][RAPROC] frame 214, subframe 7, UE 1: Error receiving ULSCH (Msg3), round 2/3
[PHY][I][eNB 0][PUSCH 3] frame 214 subframe 7 RNTI 4c11 RX power (62,0) RSSI (0,0) N0 (54,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 214, Subframe 7: Msg3 in error, i = 1 
[0m[PHY][I][eNB 0/0][RAPROC] frame 215, subframe 1, UE 2: Error receiving ULSCH (Msg3), round 0/3
[PHY][I][eNB 0][PUSCH 7] frame 215 subframe 1 RNTI 81b3 RX power (24,0) RSSI (0,0) N0 (54,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 215, Subframe 1: Msg3 in error, i = 2 
[0m[PHY][I][eNB 0/0][RAPROC] frame 215, subframe 5, UE 1: Error receiving ULSCH (Msg3), round 3/3
[PHY][I][eNB 0][PUSCH 3] frame 215 subframe 5 RNTI 4c11 RX power (24,0) RSSI (0,0) N0 (24,0) dB ACK (0,0), decoding iter 5
[PHY][I][eNB 0][RAPROC] maxHARQ_Msg3Tx reached, abandoning RA procedure for UE 1
[MAC][I][cancel_ra_proc] [eNB 0][RAPROC] CC_id 0 Frame 215 Cancelling RA procedure for UE rnti 4c11
[93m[PHY][W][eNB] Frame 215, Subframe 5: Msg3 in error, i = 1 
[0m[PHY][I][eNB 0/0][RAPROC] frame 215, subframe 9, UE 2: Error receiving ULSCH (Msg3), round 1/3
[PHY][I][eNB 0][PUSCH 7] frame 215 subframe 9 RNTI 81b3 RX power (62,0) RSSI (0,0) N0 (24,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 215, Subframe 9: Msg3 in error, i = 2 
[0m[PHY][I][eNB 0/0][RAPROC] frame 216, subframe 7, UE 2: Error receiving ULSCH (Msg3), round 2/3
[PHY][I][eNB 0][PUSCH 7] frame 216 subframe 7 RNTI 81b3 RX power (62,0) RSSI (0,0) N0 (24,0) dB ACK (0,0), decoding iter 5
[93m[PHY][W][eNB] Frame 216, Subframe 7: Msg3 in error, i = 2 
[0m[PHY][I][eNB 0/0][RAPROC] frame 217, subframe 5, UE 2: Error receiving ULSCH (Msg3), round 3/3
[PHY][I][eNB 0][PUSCH 7] frame 217 subframe 5 RNTI 81b3 RX power (63,0) RSSI (0,0) N0 (24,0) dB ACK (0,0), decoding iter 5
[PHY][I][eNB 0][RAPROC] maxHARQ_Msg3Tx reached, abandoning RA procedure for UE 2
[MAC][I][cancel_ra_proc] [eNB 0][RAPROC] CC_id 0 Frame 217 Cancelling RA procedure for UE rnti 81b3
[93m[PHY][W][eNB] Frame 217, Subframe 5: Msg3 in error, i = 2 
[0m[93m[PHY][W][eNB 0, CC 0] frame 340, subframe 8, UE 0: ULSCH consecutive error count reached 10, removing UE
[0m[MAC][I][mac_remove_ue] Removing UE 0 from Primary CC_id 0 (rnti 8c71)
[93m[RRC][W][eNB 0] Removing UE RNTI 8c71
[0m[SCTP][I][sctp_send_data] Successfully sent 27 bytes on stream 1 for assoc_id 5
[RRC][I][FRAME 00340][eNB][MOD 00][RNTI 8c71] Removed UE context
[SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 46
[SCTP][I][sctp_eNB_read_from_socket] Received notification for sd 46, type 32777
[SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 46
[SCTP][I][sctp_eNB_read_from_socket] [5][46] Msg of length 23 received from port 36412, on stream 1, PPID 18
[S1AP][I][s1ap_decode_s1ap_uecontextreleasecommandies] Decoding message S1ap_UEContextReleaseCommandIEs (/home/wspn/oai/oma/openairinterface5g/cmake_targets/lte_build_oai/build/CMakeFiles/R10.5/s1ap_decoder.c:5946)
[93m[RRC][W][eNB 0] In S1AP_UE_CONTEXT_RELEASE_COMMAND: unknown UE from eNB_ue_s1ap_id (420141)
[0m[93m[RRC][W]S1AP removed entry in hashtable s1ap_id2_s1ap_ids for eNB_ue_s1ap_id 420141
[0m[93m[RRC][W]S1AP removed entry in hashtable initial_id2_s1ap_ids for ue_initial_id 1
[0m[93m[S1AP][W][s1ap_ue_context_release_complete] Removed UE context eNB_ue_s1ap_id 420141
[0m[SCTP][I][sctp_send_data] Successfully sent 21 bytes on stream 1 for assoc_id 5
[SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 46
[SCTP][I][sctp_eNB_read_from_socket] Received notification for sd 46, type 32777




你可能感兴趣的:(LTE,软件无线电)