Ubuntu下NS3安装步骤

1. NS3安装预先设置Ubuntu环境，执行在终端以下命令
sudo apt-get install gcc g++ python

sudo apt-get install mercurial

sudo apt-get install bzr
sudo apt-get install gdb valgrind 

sudo apt-get install gsl-bin libgsl0-dev libgsl0ldbl

sudo apt-get install flex bison

sudo apt-get install g++-3.4 gcc-3.4

sudo apt-get install tcpdump

sudo apt-get install sqlite sqlite3 libsqlite3-dev

sudo apt-get install libxml2 libxml2-dev

sudo apt-get install libgtk2.0-0 libgtk2.0-dev

sudo apt-get install vtun lxc

sudo apt-get install uncrustify

sudo apt-get install doxygen graphviz imagemagick

sudo apt-get install texlive texlive-pdf texlive-latex-extra texlive-generic-extra texlive-generic-recommended

sudo apt-get install texinfo dia texlive texlive-pdf texlive-latex-extra texlive-extra-utils texlive-generic-recommended

sudo apt-get install python-pygraphviz python-kiwi python-pygoocanvas libgoocanvas-dev

sudo apt-get install libboost-signal-dev libboost-filesystem-dev

2. 安装NS3

2.1下载NS3安装包并解压,官网上（www.nsnam.org）下载的3.13版本格式为ns-allinone-3.13.tar.bz2

在终端运行以下命令进行解压缩：

bzip2 -d ns-allinone-3.13.tar.bz2
tar xvf ns-allinone-3.13.tar

 

2.2命令终端进入解压缩文件夹 执行命令

./build.py

2.3 进入ns-3.13目录使用waf构建

./waf -d optimized configure
./waf -d debug configure
./waf
./waf -d debug --enable-sudo configure


3. 脚本运行 进入ns-3.13目录

./waf --run hello-simulator

会输出如下信息: hello simulator