CYPRESS USB芯片win10驱动

CYPRESS USB芯片win10驱动

The ZIP file attached with this knowledge base article contains the CyUSB3.inf and CyUSB3.sys files for FX3, FX2LP (CY7C68013A / CY7C68014A / CY7C68015A / CY7C68016A), and FX1 (CY7C64713)

The following operating systems are supported: 

• Windows XP (32-bit and 64-bit)
• Windows Vista (32-bit and 64-bit) 
• Windows 7 (32-bit and 64-bit) 
• Windows 8 (32-bit and 64-bit) 
• Windows 8.1 (32-bit and 64-bit)
• Windows 10 (32-bit and 64-bit). 

Use CyUSB3.inf in the path (after extracting the .zip file) shown in the table below for the respective OS. 

                                                                                                                                                                                            

Operating System	Folder path
Windows 10	Win10\x86
Windows 10 x64	Win10\x64
Windows 7	Win7\x86
Windows 7 x64	Win7\x64
Windows Vista	vista\x86
Windows Vista x64	vista\x64
Windows XP	wxp\x86
Windows XP x64	wxp\x64
Windows 8	Win8\x86
Windows 8 x64	Win8\x64
Windows 8.1	Win8.1\x86
Windows8.1 x64	Win8.1\X64

To match the device with the drivers, refer to the steps mentioned under the section "Matching Devices to the Driver " in the attached PDF file. Adding the VID/PID is already done in the attached inf file , so you can skip "Step A : Add the device's VendorID and ProductID to the CYUSB3.INF file".

附件下载：

以下两个文件均可在参考文献1中下载，为了方便国内用户下载，特此上传至百度云。

1.驱动压缩包

https://pan.baidu.com/s/1pihDiR9Qj8yrI_0mos-Nkg

2.驱动使用说明

https://pan.baidu.com/s/1G-t87mlZGLV59H3jloMKrg

参考文献：

1.https://community.cypress.com/docs/DOC-12366