华为AP上线配置

本章主要针对基础上线配置讲解，及认证上线配置，以下是拓扑：

基础配置 

DHCP地址池配置

[AC6005]ip pool vlan10

[AC6005-ip-pool-vlan10]network 192.168.10.0 mask 24

[AC6005-ip-pool-vlan10]gateway-list 192.168.10.254

[AC6005-ip-pool-vlan10]option 43 sub-option 2 ip-address 192.168.10.254

---

VLAN及接口配置

[AC6005]vlan 10

[AC6005]interface g0/0/1

[AC6005-GigabitEthernet0/0/1]port link-type trunk

[AC6005-GigabitEthernet0/0/1]port trunk pvid vlan 10

[AC6005-GigabitEthernet0/0/1]port trunk allow-pass vlan all

---

三层接口配置

[AC6005]interface vlan 10

[AC6005-Vlanif10]ip address 192.168.10.254 24

[AC6005-Vlanif10]dhcp select global

---

无线相关配置

[AC6005]capwap source ip-address 192.168.10.254

MAC认证

[AC6605]wlan

[AC6605-wlan-view]ap auth-mode mac-auth

[AC6605-wlan-view]ap whitelist mac xxxx-xxxx-xxxx

SN认证

[AC6605]wlan

[AC6605-wlan-view]ap auth-mode sn-auth

[AC6605-wlan-view]ap whitelist sn xxxxxxxxxxxxxxxxxxxx

配置了认证之后，AP的上线时间会慢一点点，所以不要过早地认为自己做错了，有可能是认证关系，耐心等待些时间