内核开启VF小结

2017-8-29 16:33:40

内核开启VF小结：

1. eth2上创建4个VF
echo 4 > /sys/class/net/eth2/device/sriov_numvfs
2. 关闭eth2 VF
~ # echo 0 > /sys/class/net/eth2/device/sriov_numvfs
注：如果遇到"/sys/class/net//device/sriov_numvfs"文件不存，
内核开启配置如下试试：
[*] PCI support
    [*]   Support mmconfig PCI config space access
    [*]   PCI Express Port Bus support        
    [*]   Enable PCI resource re-allocation detection
    [*] PCI IOV support   
    [*] PCI PRI support
[*] IOMMU Hardware Support  --->
[*] Support for Intel IOMMU using DMA Remapping Devices
[*] Support for Shared Virtual Memory with Intel IOMMU

转载于:https://www.cnblogs.com/mull/p/8503851.html