Cadence生成网表时报警 WARNING(ORCAP-36006): Part Name “xxx”is renamed to

cadence版本：Cadence  16.6

 

在生产Cadence生产网表文件时：

有一个网表log文件 netlist.log，内容如下。 提示各种警告，原因是  part name太长了。

 

{ Using PSTWRITER 16.6.0 d001Jun-25-2019 at 15:08:15 }

#1 WARNING(ORCAP-36006): Part Name "ANT_2450AT18A100_ANT_2450AT18A100_2450AT18A100E_2450AT18A100E" is renamed to "ANT_2450AT18A100_ANT_2450AT18A1".
#2 WARNING(ORCAP-36006): Part Name "C_C1005_100NF_GRM155R71C104KA88D" is renamed to "C_C1005_100NF_GRM155R71C104KA88".
#3 WARNING(ORCAP-36006): Part Name "C_C0402_220NF_GRM155R71C104KA88D" is renamed to "C_C0402_220NF_GRM155R71C104KA88".
#4 WARNING(ORCAP-36006): Part Name "C_C1005_100NF_ZRB15XR61A475ME01D" is renamed to "C_C1005_100NF_ZRB15XR61A475ME01".
#5 WARNING(ORCAP-36006): Part Name "C_C1005_4.7NF_GRM155R71C104KA88D" is renamed to "C_C1005_4.7NF_GRM155R71C104KA88".
#6 WARNING(ORCAP-36006): Part Name "C_C1005_2.2PF_GRM155R61A105ME15D" is renamed to "C_C1005_2.2PF_GRM155R61A105ME15".
#7 WARNING(ORCAP-36006): Part Name "PH_1.25_4P_PH125_1X04_PH_1.25_4P" is renamed to "PH_1.25_4P_PH125_1X04_PH_1.25_4".
#8 WARNING(ORCAP-36006): Part Name "PH_1.25_3P_PH125_1X03_PH_1.25_3P" is renamed to "PH_1.25_3P_PH125_1X03_PH_1.25_3".
#9 WARNING(ORCAP-36006): Part Name "PH_1.25_2P_PH125_1X02_PH_1.25_2P" is renamed to "PH_1.25_2P_PH125_1X02_PH_1.25_2".
#10 WARNING(ORCAP-36006): Part Name "PH_1.25_2P_PH125_1X02_PH_1.25_2P_NP_1X02_H_2.54_TH" is renamed to "PH_1.25_2P_PH125_1X02_PH_1.25_1".
#11 WARNING(ORCAP-36006): Part Name "INDUCTOR_L0805_10UH_CKP2012NR47M-T" is renamed to "INDUCTOR_L0805_10UH_CKP2012NR47".
#12 WARNING(ORCAP-36006): Part Name "TRANS.NPN_SOT95P290X130-3N_APM2301" is renamed to "TRANS.NPN_SOT95P290X130-3N_APM2".
#13 WARNING(ORCAP-36006): Part Name "R_R1005_BLM15AG601SN1D_RC0402JR-072K2L" is renamed to "R_R1005_BLM15AG601SN1D_RC0402JR".
#14 WARNING(ORCAP-36006): Part Name "SW_KEY_SKRTLAE010_KEY_SKRTLAE010" is renamed to "SW_KEY_SKRTLAE010_KEY_SKRTLAE01".
#15 WARNING(ORCAP-36006): Part Name "SW_TACT-4PINS_SW_KMR2_KMR221GLFS_NP_KMR221GLFS" is renamed to "SW_TACT-4PINS_SW_KMR2_KMR221GLF".
#16 WARNING(ORCAP-36006): Part Name "SW_TACT-4PINS_SW_KMR2_KMR221GLFS_KMR221GLFS" is renamed to "SW_TACT-4PINS_SW_KMR2_KMR221G_1".
#17 WARNING(ORCAP-36006): Part Name "DA14580_QNF48_DA14580_QFN48_DA14580_QNF48" is renamed to "DA14580_QNF48_DA14580_QFN48_DA1".
#18 WARNING(ORCAP-36006): Part Name "DRV8832DRCT_DRV8832DRCR_VSON10_DRV8832DRCT" is renamed to "DRV8832DRCT_DRV8832DRCR_VSON10_".
#19 WARNING(ORCAP-36006): Part Name "OLED_096_4WIRE_OLED_096_OLED_096_4WIRE" is renamed to "OLED_096_4WIRE_OLED_096_OLED_09".
#20 WARNING(ORCAP-36006): Part Name "W25X20CLUXIG_W25X20CLUXIG_USON-8_W25X20CLUXIG" is renamed to "W25X20CLUXIG_W25X20CLUXIG_USON-".
#21 WARNING(ORCAP-36006): Part Name "LTC2950-1_LTC2950DDB_LTC2950CDDB-1" is renamed to "LTC2950-1_LTC2950DDB_LTC2950CDD".
#22 WARNING(ORCAP-36006): Part Name "XC6210B332MR_SOT95P280X145-5N_XC6210B332MR" is renamed to "XC6210B332MR_SOT95P280X145-5N_X".
#23 WARNING(ORCAP-36006): Part Name "CRYSTAL_4PIN_XTAL3200X2500X70_16.000MHZ_7M-16.000MEEQ-T" is renamed to "CRYSTAL_4PIN_XTAL3200X2500X70_1".
#24 WARNING(ORCAP-36006): Part Name "CRYSTAL_XTAL_ABS06_32.768KHZ_9HT11-32.768KDZB-T" is renamed to "CRYSTAL_XTAL_ABS06_32.768KHZ_9H".
INFO(ORCAP-36080): Scanning netlist files ...

Loading... E:\电路图\NEW_M10\M10_V2_V0.61\SCH\allegro/pstchip.dat

Loading... E:\电路图\NEW_M10\M10_V2_V0.61\SCH\allegro/pstchip.dat

Loading... E:\电路图\NEW_M10\M10_V2_V0.61\SCH\allegro/pstxprt.dat

Loading... E:\电路图\NEW_M10\M10_V2_V0.61\SCH\allegro/pstxnet.dat
packaging the design view...

 

 

解决办法：

 

Tools --> Create Netlist:

 

 

 

然后再生产网表，即可 解决 part name太长问题的告警。

 

 

cadence解决后导致的遗留问题：

导入allegro时，会导致名称太长报错。

 

所有cadence原理图中，建议part name 长度依然保持为31，名称太长时，系统会自动 renamed 成一个短的名称。

 

参考：http://www.eda365.com/forum.php?mod=viewthread&tid=88592&page=1&_dsign=07260b1b