- 1.故障现象
- 2.解决方案
1.故障现象
我的测试环境有一个NAS,之前配置都是按照测试需求在/etc/fstab里添加配置挂载选项: vi /etc/fstab192.168.1.2:/mnt/HD/HD_a2/Public /public nfs rw,bg,hard,nointr,rsize=32768,wsize=32768,tcp,actimeo=0,vers=3,timeo=600
创建/public目录后,直接mount挂载即可:
mkdir /public
mount -a
但今天在一套最小化安装的RHEL6.8上,挂载时遇到报错如下:
[root@test04 ~]# mount -a
mount: wrong fs type, bad option, bad superblock on 192.168.1.2:/mnt/HD/HD_a2/Public,
missing codepage or helper program, or other error
(for several filesystems (e.g. nfs, cifs) you might
need a /sbin/mount. helper program)
In some cases useful info is found in syslog - try
dmesg | tail or so
2.解决方案
解决方法是安装nfs-utils:[root@test04 ~]# yum install nfs-utils
再次尝试挂载报错:
[root@test04 ~]# mount -a
mount.nfs: rpc.statd is not running but is required for remote locking.
mount.nfs: Either use '-o nolock' to keep locks local, or start statd.
mount.nfs: an incorrect mount option was specified
这个报错比较明显了,需检查下rpc.statd对应的rpcbind服务状态,启动这个服务并确保其之后开机自启动:
[root@test04 ~]# service rpcbind status
rpcbind is stopped
[root@test04 ~]# service rpcbind start
Starting rpcbind: [ OK ]
[root@test04 ~]# chkconfig --list rpcbind
rpcbind 0:off 1:off 2:on 3:on 4:on 5:on 6:off
再次尝试挂载成功:
[root@test04 ~]# mount -a
[root@test04 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_test04-lv_root
18G 829M 16G 5% /
tmpfs 939M 0 939M 0% /dev/shm
/dev/sda1 477M 39M 414M 9% /boot
192.168.1.2:/mnt/HD/HD_a2/Public
2.7T 1.6T 1.2T 57% /public