kubernetes与calico整合
kubernetes与calico整合
说明
以前的kubernetes集群都是基于flannel搭建的，但应用系统所用的容器之间都能互访，存在一定的安全性，因calico在网络方面可支持策略，本文档为基于calico搭建kubernetes集群的记录
所有文件已经下载完成，并放置与我的github上 calico-kubernetes。
环境准备
- 宿主机系统CentOS 7.1 64bit
- virtualbox 5.0.14
- vagrant 1.8.1
- CoreOS alpha 928.0.0
- kubernetes v1.1.7
- calicoctl v0.15.0
- calico v1.0
- calico-ipam v1.0
安装
相关配置文件及组件下载完成后目录结构如下所示：
➜ coreos tree
.
├── cloud-config
│ ├── calico
│ ├── calicoctl
│ ├── calico-ipam
│ ├── easy-rsa.tar.gz
│ ├── key.sh
│ ├── kube-apiserver
│ ├── kube-controller-manager
│ ├── kubectl
│ ├── kubelet
│ ├── kube-proxy
│ ├── kube-scheduler
│ ├── make-ca-cert.sh
│ ├── master-config.yaml
│ ├── master-config.yaml.tmpl
│ ├── network-environment
│ ├── node-config.yaml_calico-02
│ ├── node-config.yaml_calico-03
│ ├── node-config.yaml.tmpl
│ └── setup-network-environment
├── manifests
│ ├── busybox.yaml
│ ├── kube-ui-rc.yaml
│ ├── kube-ui-svc.yaml
│ └── skydns.yaml
├── synced_folders.yaml
└── Vagrantfile必要二进制工具下载
# 创建目录
mkdir cloud-config && cd cloud-config
## 下载calico相关组件
wget https://github.com/projectcalico/calico-containers/releases/download/v0.15.0/calicoctl
wget https://github.com/projectcalico/calico-cni/releases/download/v1.0.0/calico
wget https://github.com/projectcalico/calico-cni/releases/download/v1.0.0/calico-ipam
## 下载kubernetes相关组件
wget http://storage.googleapis.com/kubernetes-release/release/v1.1.7/bin/linux/amd64/kubectl
wget http://storage.googleapis.com/kubernetes-release/release/v1.1.7/bin/linux/amd64/kubelet
wget http://storage.googleapis.com/kubernetes-release/release/v1.1.7/bin/linux/amd64/kube-proxy
wget http://storage.googleapis.com/kubernetes-release/release/v1.1.7/bin/linux/amd64/kube-apiserver
wget http://storage.googleapis.com/kubernetes-release/release/v1.1.7/bin/linux/amd64/kube-controller-manager
wget http://storage.googleapis.com/kubernetes-release/release/v1.1.7/bin/linux/amd64/kube-scheduler
## 下载环境设置工具
wget https://github.com/kelseyhightower/setup-network-environment/releases/download/1.0.1/setup-network-environment
## 下载证书制作工具（也可以使用CoreOS系统自带的，本文档中不包含后续再更新）
wget https://storage.googleapis.com/kubernetes-release/easy-rsa/easy-rsa.tar.gzcloud-init配置文件模板
目录中master-config.yaml、node-config.yaml_calico-02、node-config.yaml_calico-03为启动集群时根据.tmpl文件自动生成的配置文件
master cloud-init模板
~/cloud-config/master-config.yaml.tmpl 内容如下：
#cloud-config
---
write_files:
# Network config file for the Calico CNI plugin.
- path: /etc/cni/net.d/10-calico.conf
owner: root
permissions: 0755
content: |
{
"name": "calico-k8s-network",
"type": "calico",
"etcd_authority": "172.18.18.101:2379",
"log_level": "info",
"ipam": {
"type": "calico-ipam"
}
}
# Kubeconfig file.
- path: /etc/kubernetes/worker-kubeconfig.yaml
owner: root
permissions: 0755
content: |
apiVersion: v1
kind: Config
clusters:
- name: local
cluster:
server: http://172.18.18.101:8080
users:
- name: kubelet
contexts:
- context:
cluster: local
user: kubelet
name: kubelet-context
current-context: kubelet-context
hostname: __HOSTNAMT__
coreos:
update:
reboot-strategy: off
etcd2:
name: "etcdserver"
listen-client-urls: http://0.0.0.0:2379
advertise-client-urls: http://$private_ipv4:2379
initial-cluster: etcdserver=http://$private_ipv4:2380
initial-advertise-peer-urls: http://$private_ipv4:2380
listen-client-urls: http://0.0.0.0:2379,http://0.0.0.0:4001
listen-peer-urls: http://0.0.0.0:2380
fleet:
metadata: "role=master"
etcd_servers: "http://localhost:2379"
units:
- name: etcd2.service
command: start
- name: fleet.service
command: start
- name: setup-network-environment.service
command: start
content: |
[Unit]
Description=Setup Network Environment
Documentation=https://github.com/kelseyhightower/setup-network-environment
Requires=network-online.target
After=network-online.target
[Service]
ExecStartPre=-/usr/bin/chmod +x /opt/bin/setup-network-environment
ExecStart=/opt/bin/setup-network-environment
RemainAfterExit=yes
Type=oneshot
[Install]
WantedBy=multi-user.target
- name: kube-apiserver.service
command: start
content: |
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
Requires=etcd2.service
After=etcd2.service
[Service]
ExecStart=/opt/bin/kube-apiserver \
--allow-privileged=true \
--etcd-servers=http://$private_ipv4:2379 \
--admission-control=NamespaceLifecycle,NamespaceExists,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota \
--insecure-bind-address=0.0.0.0 \
--advertise-address=$private_ipv4 \
--service-account-key-file=/srv/kubernetes/kubecfg.key \
--tls-cert-file=/srv/kubernetes/server.cert \
--tls-private-key-file=/srv/kubernetes/server.key \
--service-cluster-ip-range=10.100.0.0/16 \
--client-ca-file=/srv/kubernetes/ca.crt \
--kubelet-https=true \
--secure-port=443 \
--runtime-config=extensions/v1beta1/daemonsets=true,extensions/v1beta1/deployments=true,extensions/v1beta1/ingress=true \
--logtostderr=true
Restart=always
RestartSec=10
[Install]
WantedBy=multi-user.target
- name: kube-controller-manager.service
command: start
content: |
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
Requires=kube-apiserver.service
After=kube-apiserver.service
[Service]
ExecStart=/opt/bin/kube-controller-manager \
--master=$private_ipv4:8080 \
--service_account_private_key_file=/srv/kubernetes/kubecfg.key \
--root-ca-file=/srv/kubernetes/ca.crt \
--logtostderr=true
Restart=always
RestartSec=10
[Install]
WantedBy=multi-user.target
- name: kube-scheduler.service
command: start
content: |
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
Requires=kube-apiserver.service
After=kube-apiserver.service
[Service]
ExecStart=/opt/bin/kube-scheduler --master=$private_ipv4:8080 --logtostderr=true
Restart=always
RestartSec=10
[Install]
WantedBy=multi-user.target
- name: calico-node.service
command: start
content: |
[Unit]
Description=calicoctl node
After=docker.service
Requires=docker.service
[Service]
#EnvironmentFile=/etc/network-environment
User=root
Environment="ETCD_AUTHORITY=127.0.0.1:2379"
PermissionsStartOnly=true
#ExecStartPre=/opt/bin/calicoctl pool add 192.168.0.0/16 --ipip --nat-outgoing
ExecStart=/opt/bin/calicoctl node --ip=$private_ipv4 --detach=false
Restart=always
RestartSec=10
[Install]
WantedBy=multi-user.target
- name: kubelet.service
command: start
content: |
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/kubernetes/kubernetes
After=docker.service
Requires=docker.service
[Service]
ExecStart=/opt/bin/kubelet \
--register-node=true \
--pod-infra-container-image="shenshouer/pause:0.8.0" \
--allow-privileged=true \
--config=/opt/kubernetes/manifests \
--cluster-dns=10.100.0.10 \
--hostname-override=$private_ipv4 \
--api-servers=http://localhost:8080 \
--cluster-domain=cluster.local \
--network-plugin-dir=/etc/cni/net.d \
--network-plugin=cni \
--logtostderr=true
Restart=always
RestartSec=10
[Install]
WantedBy=multi-user.target
- name: kube-proxy.service
command: start
content: |
[Unit]
Description=Kubernetes Proxy
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
Requires=kubelet.service
After=kubelet.service
[Service]
ExecStart=/opt/bin/kube-proxy \
--master=http://$private_ipv4:8080 \
--proxy-mode=iptables \
--logtostderr=true
Restart=always
RestartSec=10
[Install]
WantedBy=multi-user.target~/cloud-config/node-config.yaml.tmpl 内容如下：
#cloud-config
---
write_files:
# Network config file for the Calico CNI plugin.
- path: /etc/cni/net.d/10-calico.conf
owner: root
permissions: 0755
content: |
{
"name": "calico-k8s-network",
"type": "calico",
"etcd_authority": "172.18.18.101:2379",
"log_level": "info",
"ipam": {
"type": "calico-ipam"
}
}
# Kubeconfig file.
- path: /etc/kubernetes/worker-kubeconfig.yaml
owner: root
permissions: 0755
content: |
apiVersion: v1
kind: Config
clusters:
- name: local
cluster:
server: http://172.18.18.101:8080
users:
- name: kubelet
contexts:
- context:
cluster: local
user: kubelet
name: kubelet-context
current-context: kubelet-context
hostname: __HOSTNAMT__
coreos:
etcd2:
proxy: on
listen-client-urls: http://localhost:2379
initial-cluster: etcdserver=http://172.18.18.101:2380
fleet:
metadata: "role=node"
etcd_servers: "http://localhost:2379"
update:
reboot-strategy: off
units:
- name: etcd2.service
command: start
- name: fleet.service
command: start
- name: setup-network-environment.service
command: start
content: |
[Unit]
Description=Setup Network Environment
Documentation=https://github.com/kelseyhightower/setup-network-environment
Requires=network-online.target
After=network-online.target
[Service]
ExecStartPre=-/usr/bin/chmod +x /opt/bin/setup-network-environment
ExecStart=/opt/bin/setup-network-environment
RemainAfterExit=yes
Type=oneshot
[Install]
WantedBy=multi-user.target
- name: calico-node.service
command: start
content: |
[Unit]
Description=calicoctl node
After=docker.service
Requires=docker.service
[Service]
#EnvironmentFile=/etc/network-environment
User=root
Environment=ETCD_AUTHORITY=172.18.18.101:2379
PermissionsStartOnly=true
ExecStart=/opt/bin/calicoctl node --ip=$private_ipv4 --detach=false
Restart=always
RestartSec=10
[Install]
WantedBy=multi-user.target
- name: kubelet.service
command: start
content: |
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/kubernetes/kubernetes
After=docker.service
Requires=docker.service
[Service]
ExecStart=/opt/bin/kubelet \
--address=0.0.0.0 \
--allow-privileged=true \
--cluster-dns=10.100.0.10 \
--cluster-domain=cluster.local \
--config=/opt/kubernetes/manifests \
--hostname-override=$private_ipv4 \
--api-servers=http://172.18.18.101:8080 \
--pod-infra-container-image="shenshouer/pause:0.8.0" \
--network-plugin-dir=/etc/cni/net.d \
--network-plugin=cni \
--logtostderr=true
Restart=always
RestartSec=10
[Install]
WantedBy=multi-user.target
- name: kube-proxy.service
command: start
content: |
[Unit]
Description=Kubernetes Proxy
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
Requires=kubelet.service
After=kubelet.service
[Service]
ExecStart=/opt/bin/kube-proxy \
--master=http://172.18.18.101:8080 \
--proxy-mode=iptables \
--logtostderr=true
Restart=always
RestartSec=10
[Install]
WantedBy=multi-user.target集群附件组件
文件夹manifests中为测试工具以及DNS、kube-ui等附件组件配置文件
当启动集群时，将自动复制到master节点的home目录中
Vagrantfile配置
require 'fileutils'
require 'yaml'
# Size of the cluster created by Vagrant
num_instances=3
# Read YAML file with mountpoint details
MOUNT_POINTS = YAML::load_file('synced_folders.yaml')
module OS
def OS.windows?
(/cygwin|mswin|mingw|bccwin|wince|emx/ =~ RUBY_PLATFORM) != nil
end
def OS.mac?
(/darwin/ =~ RUBY_PLATFORM) != nil
end
def OS.unix?
!OS.windows?
end
def OS.linux?
OS.unix? and not OS.mac?
end
end
# Change basename of the VM
instance_name_prefix="calico"
Vagrant.configure("2") do |config|
# always use Vagrants insecure key
config.ssh.insert_key = false
# 指定创建集群vm所需的box
config.vm.box = "coreos-alpha-928.0.0"
config.vm.provider :virtualbox do |v|
# On VirtualBox, we don't have guest additions or a functional vboxsf
# in CoreOS, so tell Vagrant that so it can be smarter.
v.check_guest_additions = false
v.memory = 2048
v.cpus = 2
v.functional_vboxsf = false
end
# Set up each box
(1..num_instances).each do |i|
vm_name = "%s-%02d" % [instance_name_prefix, i]
config.vm.define vm_name do |host|
host.vm.hostname = vm_name
host.vm.synced_folder ".", "/vagrant", disabled: true
# 挂载当前目录到虚拟机中的/vagrant目录，自动化部署
begin
MOUNT_POINTS.each do |mount|
mount_options = ""
disabled = false
nfs = true
if mount['mount_options']
mount_options = mount['mount_options']
end
if mount['disabled']
disabled = mount['disabled']
end
if mount['nfs']
nfs = mount['nfs']
end
if File.exist?(File.expand_path("#{mount['source']}"))
if mount['destination']
host.vm.synced_folder "#{mount['source']}", "#{mount['destination']}",
id: "#{mount['name']}",
disabled: disabled,
mount_options: ["#{mount_options}"],
nfs: nfs
end
end
end
rescue
end
# 指定虚拟机的ip地址范围
ip = "172.18.18.#{i+100}"
host.vm.network :private_network, ip: ip
host.vm.provision :shell, :inline => "/usr/bin/timedatectl set-timezone Asia/Shanghai ", :privileged => true
# 自动将对应二进制文件复制到对应目录中
host.vm.provision :shell, :inline => "chmod +x /vagrant/cloud-config/key.sh && /vagrant/cloud-config/key.sh ", :privileged => true
#host.vm.provision :shell, :inline => "cp /vagrant/cloud-config/network-environment /etc/network-environment", :privileged => true
# docker pull 相应必要镜像文件
host.vm.provision :docker, images: ["busybox:latest", "shenshouer/pause:0.8.0", "calico/node:v0.15.0"]
sedInplaceArg = OS.mac? ? " ''" : ""
if i == 1
# Configure the master.
system "cp cloud-config/master-config.yaml.tmpl cloud-config/master-config.yaml"
system "sed -e 's|__HOSTNAMT__|#{vm_name}|g' -i#{sedInplaceArg} ./cloud-config/master-config.yaml"
host.vm.provision :file, :source => "./manifests/skydns.yaml", :destination => "/home/core/skydns.yaml"
host.vm.provision :file, :source => "./manifests/busybox.yaml", :destination => "/home/core/busybox.yaml"
host.vm.provision :file, :source => "./cloud-config/master-config.yaml", :destination => "/tmp/vagrantfile-user-data"
host.vm.provision :shell, :inline => "mv /tmp/vagrantfile-user-data /var/lib/coreos-vagrant/", :privileged => true
else
# Configure a node.
system "cp cloud-config/node-config.yaml.tmpl cloud-config/node-config.yaml_#{vm_name}"
system "sed -e 's|__HOSTNAMT__|#{vm_name}|g' -i#{sedInplaceArg} ./cloud-config/node-config.yaml_#{vm_name}"
host.vm.provision :file, :source => "./cloud-config/node-config.yaml_#{vm_name}", :destination => "/tmp/vagrantfile-user-data"
host.vm.provision :shell, :inline => "mv /tmp/vagrantfile-user-data /var/lib/coreos-vagrant/", :privileged => true
end
end
end
end部署附件组件
在Vagrantfile所在目录中执行vagrant up,启动过程因挂载宿主机目录到虚拟机会要求输入宿主机密码.
启动过程中会使用vm中的docker pull必要的镜像文件，等待自动化部署完成
部署 集群附加组件
在当前目录中执行vagrant ssh calico-01进入到master主机中:
core@calico-01 ~ $ ls
busybox.yaml kube-ui-rc.yaml kube-ui-svc.yaml skydns.yaml
# 查看节点情况
core@calico-01 ~ $ kubectl get node
NAME LABELS STATUS AGE
172.18.18.101 kubernetes.io/hostname=172.18.18.101 Ready 3h
172.18.18.102 kubernetes.io/hostname=172.18.18.102 Ready 3h
172.18.18.103 kubernetes.io/hostname=172.18.18.103 Ready 3h
# 创建kube-system namespace，部署skydns rc,部署skydns svc：
kubectl create -f skydns.yaml
# 部署kube-ui
kubectl create -f kube-ui-rc.yaml
kubectl create -f kube-ui-svc.yaml
# 查看执行结果
core@calico-01 ~ $ kubectl get po -o wide --namespace=kube-system
NAME READY STATUS RESTARTS AGE NODE
kube-dns-v9-qd8i3 4/4 Running 0 3h 172.18.18.103
kube-ui-v5-8spea 1/1 Running 0 3h 172.18.18.102
# 验证DNS
# 部署busybox工具
kubectl create -f busybox.yaml
core@calico-01 ~ $ kubectl get po -o wide
NAME READY STATUS RESTARTS AGE NODE
busybox 1/1 Running 3 3h 172.18.18.101
# 验证DNS
core@calico-01 ~ $ kubectl exec busybox -- nslookup kubernetes
Server: 10.100.0.10
Address 1: 10.100.0.10
Name: kubernetes
Address 1: 10.100.0.1
# 查看calico状态
core@calico-01 ~ $ calicoctl status
calico-node container is running. Status: Up 3 hours
Running felix version 1.3.0rc6
IPv4 BGP status
IP: 172.18.18.101 AS Number: 64511 (inherited)
+---------------+-------------------+-------+----------+-------------+
| Peer address | Peer type | State | Since | Info |
+---------------+-------------------+-------+----------+-------------+
| 172.18.18.102 | node-to-node mesh | up | 03:57:16 | Established |
| 172.18.18.103 | node-to-node mesh | up | 03:59:36 | Established |
+---------------+-------------------+-------+----------+-------------+
IPv6 BGP status
No IPv6 address configured.
# 查看busybox容器地址分配，为192.168.0.0
core@calico-01 ~ $ kubectl describe po busybox
Name: busybox
Namespace: default
Image(s): busybox
Node: 172.18.18.101/172.18.18.101
Start Time: Tue, 02 Feb 2016 12:02:36 +0800
Labels: <none>
Status: Running
Reason:
Message:
IP: 192.168.0.0
Replication Controllers: <none>
Containers:
busybox:
Container ID: docker://2ffad63169095e31816bd10e45270e2d6add39480f61a5370ba76d7e4c5dd86b
Image: busybox
Image ID: docker://b175bcb790231169e232739bd2172bded9669c25104a9b723999c5f366ed7543
State: Running
Started: Tue, 02 Feb 2016 15:03:03 +0800
Last Termination State: Terminated
Reason: Error
Exit Code: 0
Started: Tue, 02 Feb 2016 14:02:52 +0800
Finished: Tue, 02 Feb 2016 15:02:52 +0800
Ready: True
Restart Count: 3
Environment Variables:
Conditions:
Type Status
Ready True
Volumes:
default-token-9u1ub:
Type: Secret (a secret that should populate this volume)
SecretName: default-token-9u1ub
Events:
FirstSeen LastSeen Count From SubobjectPath Reason Message
───────── ──────── ───── ──── ───────────── ────── ───────
3h 37m 4 {kubelet 172.18.18.101} spec.containers{busybox} Pulled Container image "busybox" already present on machine
37m 37m 1 {kubelet 172.18.18.101} spec.containers{busybox} Created Created with docker id 2ffad6316909
37m 37m 1 {kubelet 172.18.18.101} spec.containers{busybox} Started Started with docker id 2ffad6316909
# 查看集群信息中的对外服务
core@calico-01 ~ $ kubectl cluster-info
Kubernetes master is running at http://localhost:8080
KubeDNS is running at http://localhost:8080/api/v1/proxy/namespaces/kube-system/services/kube-dns
KubeUI is running at http://localhost:8080/api/v1/proxy/namespaces/kube-system/services/kube-ui在宿主机上浏览器打开http://172.18.18.101:8080/api/v1/proxy/namespaces/kube-system/services/kube-ui即可看到集群信息。
部署完成，验证也ok，开心地玩耍吧。