kubernetes之Kubeadm快速安装v1.12.0版

通过Kubeadm只需几条命令即起一个单机版kubernetes集群系统,而后快速上手k8s。
在kubeadm中,需手动安装Docker和kubeket服务,Docker运行容器引擎,kubelet是启动Pod的核心组件,每一个节点都安装好kubelet和Docker,那么运行容器和Pod的环境就准备好了,在此基础之上,使用Kubeadm工具自动配置kubelet并启动kubelet服务,将Master所有组件和Node上剩余的kube-proxy组件都运行为Pod,托管在k8s之上。

服务器规划

三台机器:一台master、两个Node:

  • k8s-master:10.3.1.20
  • k8s-node01:10.3.1.21
  • k8s-node02:10.3.1.25
  • OS:Ubuntu16.04
  • Docker:17.03.2-ce

安装前准备

1、master节点到各Node节点SSH免密登录。
2、时间同步。
3、各Node必须关闭swap:swapoff -a,否则kubelet启动失败。
4、各节点主机名和IP加入/etc/hosts解析

安装Docker

所有k8s节点安装Docker Daemon:

apt-get update
apt-get install \
    apt-transport-https \
    ca-certificates \
    curl \
    software-properties-common
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add - apt-key fingerprint 0EBFCD88 add-apt-repository \ "deb [arch=amd64] https://download.docker.com/linux/ubuntu \ $(lsb_release -cs) \ stable" apt-get update apt-get install -y docker-ce=17.03.2~ce-0~ubuntu-xenial

安装完Docker后,设置FORWARD规则为ACCEPT

#默认为DROP
 iptables -P FORWARD ACCEPT

安装kubeadm工具

  • 所有节点都需要安装kubeadm
apt-get update && apt-get install -y apt-transport-https curl
curl -s https://packages.cloud.google.com/apt/doc/apt-key.gpg | apt-key add - echo 'deb http://apt.kubernetes.io/ kubernetes-xenial main' >/etc/apt/sources.list.d/kubernetes.list apt-get update apt-get install -y kubeadm #它会自动安装kubeadm、kubectl、kubelet、kubernetes-cni、socat 

安装完后,设置kubelet服务开机自启:

systemctl enable kubelet

必须设置Kubelet开机自启动,才能让k8s集群各组件在系统重启后自动运行。

部署集群

有了上面这些基础设置后,就可以开始用kubeadm init部署k8s集群了。

在k8s-master上操作

这一步之前确保swap已关闭。

kubeadm init -h可查看帮助信息:

root@k8s-master:~# kubeadm  init -h
 ##查看init可用的参数,这里使用这两个参数:
   --pod-network-cidr string : 自定义Pod网络
   --ignore-preflight-errors strings: 忽略一些错误

开始初始化集群

root@k8s-master:~# kubeadm init  --pod-network-cidr 192.168.0.0/16 --ignore-preflight-errors=all

输出如下信息:

#初始化kubernetes,Kubeadm默认安装当前最新版本kubernetes
[init] using Kubernetes version: v1.12.0
#安装之前检测当前是否符合k8s运行环境,因为忽略了所有错误所以这里很快就通过了。
[preflight] running pre-flight checks
[preflight/images] Pulling images required for setting up a Kubernetes cluster [preflight/images] This might take a minute or two, depending on the speed of your internet connection [preflight/images] You can also perform this action in beforehand using 'kubeadm config images pull' #写入kubelet相关配置文件,并启动kubelet服务 [kubelet] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env" [kubelet] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml" [preflight] Activating the kubelet service #自动生成集群用到的证书 [certificates] Generated front-proxy-ca certificate and key. [certificates] Generated front-proxy-client certificate and key. [certificates] Generated etcd/ca certificate and key. [certificates] Generated etcd/server certificate and key. [certificates] etcd/server serving cert is signed for DNS names [k8s-master localhost] and IPs [127.0.0.1 ::1] [certificates] Generated apiserver-etcd-client certificate and key. [certificates] Generated etcd/peer certificate and key. [certificates] etcd/peer serving cert is signed for DNS names [k8s-master localhost] and IPs [10.3.1.20 127.0.0.1 ::1] [certificates] Generated etcd/healthcheck-client certificate and key. [certificates] Generated ca certificate and key. [certificates] Generated apiserver-kubelet-client certificate and key. [certificates] Generated apiserver certificate and key. [certificates] apiserver serving cert is signed for DNS names [k8s-master kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.3.1.20] [certificates] valid certificates and keys now exist in "/etc/kubernetes/pki" [certificates] Generated sa key and public key. #生成kubelet配置信息写入相应的文件 [kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/admin.conf" [kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/kubelet.conf" [kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/controller-manager.conf" [kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/scheduler.conf" #生成pod清单文件,kubelet将根据此清单文件创建各组件的Pod [controlplane] wrote Static Pod manifest for component kube-apiserver to "/etc/kubernetes/manifests/kube-apiserver.yaml" [controlplane] wrote Static Pod manifest for component kube-controller-manager to "/etc/kubernetes/manifests/kube-controller-manager.yaml" [controlplane] wrote Static Pod manifest for component kube-scheduler to "/etc/kubernetes/manifests/kube-scheduler.yaml" [etcd] Wrote Static Pod manifest for a local etcd instance to "/etc/kubernetes/manifests/etcd.yaml" #根据清单目录开始启动Pod [init] waiting for the kubelet to boot up the control plane as Static Pods from directory "/etc/kubernetes/manifests" [init] this might take a minute or longer if the control plane images have to be pulled [apiclient] All control plane components are healthy after 20.003530 seconds [uploadconfig] storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace [kubelet] Creating a ConfigMap "kubelet-config-1.12" in namespace kube-system with the configuration for the kubelets in the cluster #给Master设置一个labele且设置一个taint [markmaster] Marking the node k8s-master as master by adding the label "node-role.kubernetes.io/master=''" [markmaster] Marking the node k8s-master as master by adding the taints [node-role.kubernetes.io/master:NoSchedule] #集群的一些基础设置 [patchnode] Uploading the CRI Socket information "/var/run/dockershim.sock" to the Node API object "k8s-master" as an annotation #设置了一个引导令牌,在节点加入时使用 [bootstraptoken] using token: mwfr7m.57rmd56ghjyu0716 [bootstraptoken] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials [bootstraptoken] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token [bootstraptoken] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster [bootstraptoken] creating the "cluster-info" ConfigMap in the "kube-public" namespace [addons] Applied essential addon: CoreDNS [addons] Applied essential addon: kube-proxy #提示master已初始化成功 Your Kubernetes master has initialized successfully! To start using your cluster, you need to run the following as a regular user: #需要执行下面三条命令 mkdir -p $HOME/.kube sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config sudo chown $(id -u):$(id -g) $HOME/.kube/config You should now deploy a pod network to the cluster. Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at: https://kubernetes.io/docs/concepts/cluster-administration/addons/ You can now join any number of machines by running the following on each node as root: kubeadm join 10.3.1.20:6443 --token mwfr7m.57rmd56ghjyu0716 --discovery-token-ca-cert-hash sha256:8fbd33519b0203e9aa03cc882cb5489b5e6ad455f97581b1abf8ceb1dca8f622 #把上面kubeadm join这一句话把这个记录下来,否则以后找起来有点麻烦,在node端加入时用到。

初始化完成,一台Master节点就部署好了,初始化过程中需要一定时间来pull镜像,也可以使用下面的命令提前下载好镜像:

root@k8s-master:~# kubeadm  config images pull 

[config/images] Pulled k8s.gcr.io/kube-apiserver:v1.12.0
[config/images] Pulled k8s.gcr.io/kube-controller-manager:v1.12.0 [config/images] Pulled k8s.gcr.io/kube-scheduler:v1.12.0 [config/images] Pulled k8s.gcr.io/kube-proxy:v1.12.0 [config/images] Pulled k8s.gcr.io/pause:3.1 [config/images] Pulled k8s.gcr.io/etcd:3.2.24 [config/images] Pulled k8s.gcr.io/coredns:1.2.2 # root@k8s-master:~# docker images REPOSITORY TAG IMAGE ID CREATED SIZE k8s.gcr.io/kube-apiserver v1.12.0 ab60b017e34f 16 hours ago 194 MB k8s.gcr.io/kube-controller-manager v1.12.0 07e068033cf2 16 hours ago 164 MB k8s.gcr.io/kube-scheduler v1.12.0 5a1527e735da 16 hours ago 58.3 MB k8s.gcr.io/kube-proxy v1.12.0 9c3a9d3f09a0 16 hours ago 96.6 MB k8s.gcr.io/etcd 3.2.24 3cab8e1b9802 7 days ago 220 MB k8s.gcr.io/coredns 1.2.2 367cdc8433a4 4 weeks ago 39.2 MB k8s.gcr.io/pause 3.1 da86e6ba6ca1 9 months ago 742 kB
  • 根据提示执行:
    root@k8s-master:~# mkdir -p $HOME/.kube
    root@k8s-master:~# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
    root@k8s-master:~# sudo chown $(id -u):$(id -g) $HOME/.kube/config

    在Node上操作

    在所有Node上使用kubeadm join加入集群:

#确保swap已关闭
#复制在master节点上记录下的那句话,以加入集群
root@k8s-node01:~# kubeadm join 10.3.1.20:6443 --token mwfr7m.57rmd56ghjyu0716 --discovery-token-ca-cert-hash sha256:8fbd33519b0203e9aa03cc882cb5489b5e6ad455f97581b1abf8ceb1dca8f622

输出如下信息:

#加入时也会做一些预检
[preflight] running pre-flight checks
    [WARNING RequiredIPVSKernelModulesAvailable]: the IPVS proxier will not be used, because the following required kernel modules are not loaded: [ip_vs_rr ip_vs_wrr ip_vs_sh ip_vs] or no builtin kernel ipvs support: map[ip_vs:{} ip_vs_rr:{} ip_vs_wrr:{} ip_vs_sh:{} nf_conntrack_ipv4:{}] you can solve this problem with following methods: 1. Run 'modprobe -- ' to load missing kernel modules; 2. Provide the missing builtin kernel ipvs support [discovery] Trying to connect to API Server "10.3.1.20:6443" [discovery] Created cluster-info discovery client, requesting info from "https://10.3.1.20:6443" [discovery] Requesting info from "https://10.3.1.20:6443" again to validate TLS against the pinned public key [discovery] Cluster info signature and contents are valid and TLS certificate validates against pinned roots, will use API Server "10.3.1.20:6443" [discovery] Successfully established connection with API Server "10.3.1.20:6443" [kubelet] Downloading configuration for the kubelet from the "kubelet-config-1.12" ConfigMap in the kube-system namespace [kubelet] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml" [kubelet] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env" [preflight] Activating the kubelet service [tlsbootstrap] Waiting for the kubelet to perform the TLS Bootstrap... [patchnode] Uploading the CRI Socket information "/var/run/dockershim.sock" to the Node API object "k8s-node01" as an annotation This node has joined the cluster: * Certificate signing request was sent to apiserver and a response was received. * The Kubelet was informed of the new secure connection details. Run 'kubectl get nodes' on the master to see this node join the cluster. 

init完后,节点已加入群集。

最后,在master节点查看:

root@k8s-master:~# kubectl get node
NAME          STATUS     ROLES    AGE     VERSION
k8s-master    NotReady   master   6m39s   v1.12.0
k8s-node01   NotReady      4m31s v1.12.0 k8s-node02 NotReady  97s v1.12.0

去除master的taint,使用master也能被调度pod

root@k8s-master:~# kubectl taint nodes k8s-master node-role.kubernetes.io/master-
node/k8s-master untainted

安装CNI插件

各Node节点处于"NotReady" ,需要安装一个CNI网络插件:

root@k8s-master:~#  kubectl apply -f https://docs.projectcalico.org/v3.1/getting-started/kubernetes/installation/hosted/kubeadm/1.7/calico.yaml
configmap/calico-config configured
daemonset.extensions/calico-etcd created
service/calico-etcd created
daemonset.extensions/calico-node created
deployment.extensions/calico-kube-controllers created
clusterrolebinding.rbac.authorization.k8s.io/calico-cni-plugin created
clusterrole.rbac.authorization.k8s.io/calico-cni-plugin created
serviceaccount/calico-cni-plugin created
clusterrolebinding.rbac.authorization.k8s.io/calico-kube-controllers created
clusterrole.rbac.authorization.k8s.io/calico-kube-controllers created
serviceaccount/calico-kube-controllers unchanged
root@k8s-master:~# 

几分钟后,各Node全部Ready:

#各节点已正常运行
root@k8s-master:~# kubectl get node
NAME         STATUS   ROLES    AGE   VERSION
k8s-master   Ready    master   1h   v1.12.0 k8s-node01 Ready  1h v1.12.0 k8s-node02 Ready  1h v1.12.0 

至此,所有组件全部运行:

root@k8s-master:~# kubectl get pod -n kube-system
NAME                                       READY   STATUS    RESTARTS   AGE
calico-etcd-d7v6w                          1/1     Running   0          3m21s calico-kube-controllers-75fb4f8996-dg7hd 1/1 Running 0 3m20s calico-node-794nd 2/2 Running 0 3m19s calico-node-b852z 2/2 Running 0 3m19s calico-node-z7f4n 2/2 Running 0 3m19s coredns-576cbf47c7-7svmm 1/1 Running 0 15h coredns-576cbf47c7-kzbv2 1/1 Running 0 15h etcd-k8s-master 1/1 Running 0 15h kube-apiserver-k8s-master 1/1 Running 0 15h kube-controller-manager-k8s-master 1/1 Running 0 15h kube-proxy-7n5z9 1/1 Running 0 15h kube-proxy-rwq9g 1/1 Running 0 15h kube-proxy-v7qnx 1/1 Running 0 15h kube-scheduler-k8s-master 1/1 Running 0 15h root@k8s-master:~# 

测试集群

  • 配置kubectl的命令补全功能
    命令补全功能由安装包"bash-completion"提供,Ubuntu系统中默认已安装。

    当前shell生效:
    source <(kubectl completion bash)
    永久生效:
    echo "source <(kubectl completion bash)" >> ~/.bashrc
  • 启动一个pod验证集群是否正常运行。
#run一个deployment
kubectl run -h
Usage:
  kubectl run NAME --image=image [--env="key=value"] [--port=port] [--replicas=replicas] [--dry-run=bool]
[--overrides=inline-json] [--command] -- [COMMAND] [args...] [options]

启动一个nginx

kubectl run nginx --image=nginx:1.10 --port=80
deployment.apps/nginx created
#查看 root@k8s-master:~# kubectl get pod -w -o wide NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE nginx-787b58fd95-p9jwl 0/1 ContainerCreating 0 59s <none> k8s-node02 <none> nginx-787b58fd95-p9jwl 1/1 Running 0 70s 192.168.58.193 k8s-node02 <none>
  • 测试nginx正常访问
    root@k8s-master:~# curl  -I 192.168.58.193
    HTTP/1.1 200 OK
    Server: nginx/1.10.3
    Date: Sat, 29 Sep 2018 02:42:06 GMT
    Content-Type: text/html
    Content-Length: 612 Last-Modified: Tue, 31 Jan 2017 15:01:11 GMT Connection: keep-alive ETag: "5890a6b7-264" Accept-Ranges: bytes
  • 把nginx暴露一个端口出来,以使集群之外能访问
    kubectl expose -h 
    Usage:
    kubectl expose (-f FILENAME | TYPE NAME) [--port=port] [--protocol=TCP|UDP|SCTP] [--target-port=number-or-name] [--name=name] [--external-ip=external-ip-of-service] [--type=type] [options]
    root@k8s-master:~# kubectl expose deployment nginx --port=801 --target-port=80 --type=NodePort --name nginx-svc
    service/nginx-svc exposed
    root@k8s-master:~# 
  • 查看服务:
    root@k8s-master:~# kubectl get svc
    NAME         TYPE        CLUSTER-IP      EXTERNAL-IP   PORT(S)         AGE
    kubernetes   ClusterIP   10.96.0.1               443/TCP 16h nginx-svc NodePort 10.100.84.207  801:30864/TCP 25s

现在可以访问任意Node的30864端口访问到nginx服务:

root@k8s-node01:~# curl 10.3.1.21:30864


<html>
<head> <title>Welcome to nginx!title> <style> body { width: 35em; margin: 0 auto; font-family: Tahoma, Verdana, Arial, sans-serif; } style> head> <body>

如果发现哪个某个Node端口无法访问,则设置默认FORWARD规则为ACCEPT

 iptables -P FORWARD ACCEPT

kubeadm集群配置到此完成,可参考官方文档

你可能感兴趣的:(kubernetes之Kubeadm快速安装v1.12.0版)