在MAC下配置自带的SVN及Versions使用

第一步：mkdir /Users/svn
第二步：svnadmin create /Users/svn/repository
第三步：修改respotitory目录下的conf目录下的文件 
              1、修改passwd文件 ：
### This file is an example password file for svnserve.
### Its format is similar to that of svnserve.conf. As shown in the
### example below it contains one section labelled [users].
### The name and password for each user follow, one account per line.

[users]
huangyibiao = tianshi520   (这个是我自己设置的帐号和密码)
sally = sallyssecret
             2、修改authz文件 
### This file is an example authorization file for svnserve.
### Its format is identical to that of mod_authz_svn authorization
### files.
### As shown below each section defines authorizations for the path and
### (optional) repository specified by the section name.
### The authorizations follow. An authorization line can refer to:
###  - a single user,
###  - a group of users defined in a special [groups] section,
###  - an alias defined in a special [aliases] section,
###  - all authenticated users, using the '$authenticated' token,
###  - only anonymous users, using the '$anonymous' token,
###  - anyone, using the '*' wildcard.
###
### A match can be inverted by prefixing the rule with '~'. Rules can
### grant read ('r') access, read-write ('rw') access, or no access
### ('').


[aliases]
# joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average


[groups]
huangyibiao_and_sally = huangyibiao,sally
# harry_sally_and_joe = harry,sally,&joe


# [/foo/bar]
# harry = rw
# &joe = r
# * =


[/]
@huangyibiao_and_sally = rw
* = 


# [repository:/baz/fuz]
# @harry_and_sally = rw
# * = r
                           3、svnserve.conf文件 
### This file controls the configuration of the svnserve daemon, if you
### use it to allow access to this repository.  (If you only allow
### access through http: and/or file: URLs, then this file is
### irrelevant.)

### Visit http://subversion.apache.org/ for more information.

[general]
### The anon-access and auth-access options control access to the
### repository for unauthenticated (a.k.a. anonymous) users and
### authenticated users, respectively.
### Valid values are "write", "read", and "none".
### Setting the value to "none" prohibits both reading and writing;
### "read" allows read-only access, and "write" allows complete
### read/write access to the repository.
### The sample settings below are the defaults and specify that anonymous
### users have read-only access to the repository, while authenticated
### users have read and write access to the repository.
anon-access = none
auth-access = write
### The password-db option controls the location of the password
### database file.  Unless you specify a path starting with a /,
### the file's location is relative to the directory containing
### this configuration file.
### If SASL is enabled (see below), this file will NOT be used.
### Uncomment the line below to use the default password file.
password-db = passwd
### The authz-db option controls the location of the authorization
### rules for path-based access control.  Unless you specify a path
### starting with a /, the file's location is relative to the the
### directory containing this file.  If you don't specify an
### authz-db, no path-based access control is done.
### Uncomment the line below to use the default authorization file.
authz-db = authz
### This option specifies the authentication realm of the repository.
### If two repositories have the same authentication realm, they should
### have the same password database, and vice versa.  The default realm
### is repository's uuid.
# realm = My First Repository
### The force-username-case option causes svnserve to case-normalize
### usernames before comparing them against the authorization rules in the

第四步：启动服务
sudo svnserve -d -r /svn/repository 
如果没有任何提示，表示正常启动了，如果已经启动了，会提示端口已经被占用（英文的）

第五步：导入工程到svn
svn import /Users/huangyibiao/Desktop/UdpServer   svn://localhost/svn/repository/SocketRepository --username harry --password harryssecret -m "commnet infomation"
/Users/huangyibiao/Desktop/UdpServer这个参数是工程路径
svn://localhost/svn/repository/SocketRepository这个是svn服务器，下的一个新建的名称SocketRepository
到此，需要输入你的svn的帐号和密码，也就是前面在passwd文件中配置的。如果出现一堆Adding。。。，那就是正常配置完成了。

下面推荐一个好友的SVN客户端工具：versions


很久没有写博客了，为了配置这个svn，花了一晚上和一个早上的时间，才正确地配置出来，当然这个过程花了我很多的时间去阅读他人的博客，只是很多博客
在写这个配置过程的时候，都没有使用真正的路径来讲解，弄半天都不知使用哪个路径等等。
在这里，写下这个教程，帮助后来者，少走一点弯路。
谢谢！