GmSSL Android NDK编译 （版本95c0dba）
下载源码并切换到版本95c0dba
[yeqiang@localhost tmp]$ git clone https://github.com/guanzhi/GmSSL.git
Cloning into 'GmSSL'...
remote: Counting objects: 13557, done.
remote: Total 13557 (delta 0), reused 0 (delta 0), pack-reused 13557
Receiving objects: 100% (13557/13557), 32.95 MiB | 69.00 KiB/s, done.
Resolving deltas: 100% (7525/7525), done.
[yeqiang@localhost tmp]$ cd GmSSL/
[yeqiang@localhost GmSSL]$ git checkout 95c0dba
Note: checking out '95c0dba'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:
git checkout -b
HEAD is now at 95c0dba... 补充（漏）提交说明见https://github.com/zsdev2015/GmSSL/commit/5c315bca3f08e706e6a81a133575cda315012e4d
[yeqiang@localhost GmSSL]$
利用config产生Makefile
./config shared --prefix=/usr/local/gmssl no-zlib no-threads no-asm no-sse2 no-gmp no-rfc3779 no-dso 修改Makefile如下
### Generated automatically from Makefile.org by Configure.
##
## Makefile for OpenSSL
##
VERSION=1.0.2d-fips
MAJOR=1
MINOR=0.2
SHLIB_VERSION_NUMBER=1.0.0
SHLIB_VERSION_HISTORY=
SHLIB_MAJOR=1
SHLIB_MINOR=0.0
SHLIB_EXT=.so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
PLATFORM=linux-x86_64
OPTIONS=enable-shared --prefix=/home/yeqiang/Android/Sdk/ndk-bundle/platforms/android-26/arch-arm64/usr no-asm no-dso no-ec_nistp_64_gcc_128 no-gmp no-jpake no-krb5 no-libunbound no-md2 no-rc5 no-rfc3779 no-sctp no-sse2 no-ssl-trace no-store no-threads no-unit-test no-zlib no-zlib-dynamic no-static-engine
CONFIGURE_ARGS=linux-x86_64 shared --prefix=/home/yeqiang/Android/Sdk/ndk-bundle/platforms/android-26/arch-arm64/usr no-zlib no-threads no-asm no-sse2 no-gmp no-rfc3779 no-dso
SHLIB_TARGET=linux-shared
# HERE indicates where this Makefile lives. This can be used to indicate
# where sub-Makefiles are expected to be. Currently has very limited usage,
# and should probably not be bothered with at all.
HERE=.
# INSTALL_PREFIX is for package builders so that they can configure
# for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
# Normally it is left empty.
INSTALL_PREFIX=
INSTALLTOP=/home/yeqiang/Android/Sdk/ndk-bundle/platforms/android-26/arch-arm64/usr
# Do not edit this manually. Use Configure --openssldir=DIR do change this!
OPENSSLDIR=/home/yeqiang/Android/Sdk/ndk-bundle/platforms/android-26/arch-arm64/usr/ssl
# NO_IDEA - Define to build without the IDEA algorithm
# NO_RC4 - Define to build without the RC4 algorithm
# NO_RC2 - Define to build without the RC2 algorithm
# THREADS - Define when building with threads, you will probably also need any
# system defines as well, i.e. _REENTERANT for Solaris 2.[34]
# TERMIO - Define the termio terminal subsystem, needed if sgtty is missing.
# TERMIOS - Define the termios terminal subsystem, Silicon Graphics.
# LONGCRYPT - Define to use HPUX 10.x's long password modification to crypt(3).
# DEVRANDOM - Give this the value of the 'random device' if your OS supports
# one. 32 bytes will be read from this when the random
# number generator is initalised.
# SSL_FORBID_ENULL - define if you want the server to be not able to use the
# NULL encryption ciphers.
#
# LOCK_DEBUG - turns on lots of lock debug output :-)
# REF_CHECK - turn on some xyz_free() assertions.
# REF_PRINT - prints some stuff on structure free.
# CRYPTO_MDEBUG - turns on my 'memory leak' detecting stuff
# MFUNC - Make all Malloc/Free/Realloc calls call
# CRYPTO_malloc/CRYPTO_free/CRYPTO_realloc which can be setup to
# call application defined callbacks via CRYPTO_set_mem_functions()
# MD5_ASM needs to be defined to use the x86 assembler for MD5
# SHA1_ASM needs to be defined to use the x86 assembler for SHA1
# RMD160_ASM needs to be defined to use the x86 assembler for RIPEMD160
# Do not define B_ENDIAN or L_ENDIAN if 'unsigned long' == 8. It must
# equal 4.
# PKCS1_CHECK - pkcs1 tests.
CC= /home/yeqiang/Android/Sdk/ndk-bundle/toolchains/aarch64-linux-android-4.9/prebuilt/linux-x86_64/bin/aarch64-linux-android-gcc
CFLAG= -fPIC --sysroot=/home/yeqiang/Android/Sdk/ndk-bundle/platforms/android-26/arch-arm64 -I/home/yeqiang/Android/Sdk/ndk-bundle/sysroot/usr/include -I/home/yeqiang/Android/Sdk/ndk-bundle/sysroot/usr/include/i686-linux-android -DOPENSSL_PIC -DL_ENDIAN -O3 -Wall
DEPFLAG= -DOPENSSL_NO_EC_NISTP_64_GCC_128 -DOPENSSL_NO_GMP -DOPENSSL_NO_JPAKE -DOPENSSL_NO_LIBUNBOUND -DOPENSSL_NO_MD2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_SCTP -DOPENSSL_NO_SSL_TRACE -DOPENSSL_NO_STORE -DOPENSSL_NO_UNIT_TEST
PEX_LIBS=
EX_LIBS= -ldl
EXE_EXT=
ARFLAGS=
AR= /home/yeqiang/Android/Sdk/ndk-bundle/toolchains/aarch64-linux-android-4.9/prebuilt/linux-x86_64/bin/aarch64-linux-android-ar $(ARFLAGS) r
RANLIB= /home/yeqiang/Android/Sdk/ndk-bundle/toolchains/aarch64-linux-android-4.9/prebuilt/linux-x86_64/bin/aarch64-linux-android-ranlib
NM= nm
PERL= /usr/bin/perl
TAR= tar
TARFLAGS= --no-recursion
MAKEDEPPROG= /home/yeqiang/Android/Sdk/ndk-bundle/toolchains/aarch64-linux-android-4.9/prebuilt/linux-x86_64/bin/aarch64-linux-android-gcc
LIBDIR=lib
# We let the C compiler driver to take care of .s files. This is done in
# order to be excused from maintaining a separate set of architecture
# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
# gcc, then the driver will automatically translate it to -xarch=v8plus
# and pass it down to assembler.
AS=$(CC) -c
ASFLAG=$(CFLAG)
# For x86 assembler: Set PROCESSOR to 386 if you want to support
# the 80386.
PROCESSOR=
# CPUID module collects small commonly used assembler snippets
CPUID_OBJ= mem_clr.o
BN_ASM= bn_asm.o
EC_ASM=
DES_ENC= des_enc.o fcrypt_b.o
AES_ENC= aes_core.o aes_cbc.o
BF_ENC= bf_enc.o
CAST_ENC= c_enc.o
RC4_ENC= rc4_enc.o rc4_skey.o
RC5_ENC= rc5_enc.o
MD5_ASM_OBJ=
SHA1_ASM_OBJ=
RMD160_ASM_OBJ=
WP_ASM_OBJ= wp_block.o
CMLL_ENC= camellia.o cmll_misc.o cmll_cbc.o
MODES_ASM_OBJ=
ENGINES_ASM_OBJ=
PERLASM_SCHEME= elf
# KRB5 stuff
KRB5_INCLUDES=
LIBKRB5=
# Zlib stuff
ZLIB_INCLUDE=
LIBZLIB=
# TOP level FIPS install directory.
FIPSDIR=/usr/local/ssl/fips-2.0
# This is the location of fipscanister.o and friends.
# The FIPS module build will place it $(INSTALLTOP)/lib
# but since $(INSTALLTOP) can only take the default value
# when the module is built it will be in /usr/local/ssl/lib
# $(INSTALLTOP) for this build may be different so hard
# code the path.
FIPSLIBDIR=
# The location of the library which contains fipscanister.o
# normally it will be libcrypto unless fipsdso is set in which
# case it will be libfips. If not compiling in FIPS mode at all
# this is empty making it a useful test for a FIPS compile.
FIPSCANLIB=
# Shared library base address. Currently only used on Windows.
#
BASEADDR=0xFB00000
DIRS= crypto ssl engines apps test tools
ENGDIRS= ccgost
SHLIBDIRS= crypto ssl
# dirs in crypto to build
SDIRS= \
objects \
md4 md5 sha mdc2 hmac ripemd whrlpool \
des aes rc2 rc4 idea bf cast camellia seed modes \
bn ec rsa dsa ecdsa dh ecdh ecies dso engine \
buffer bio stack lhash rand err \
evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
cms pqueue ts srp cmac \
sm2 sm3 sms4 sm9 ecies ffx cpk zuc cbcmac otp skf paillier kdf
# keep in mind that the above list is adjusted by ./Configure
# according to no-xxx arguments...
# tests to perform. "alltests" is a special word indicating that all tests
# should be performed.
TESTS = alltests
MAKEFILE= Makefile
MANDIR=$(OPENSSLDIR)/man
MAN1=1
MAN3=3
MANSUFFIX=
HTMLSUFFIX=html
HTMLDIR=$(OPENSSLDIR)/html
SHELL=/bin/sh
TOP= .
ONEDIRS=out tmp
EDIRS= times doc bugs util include certs ms shlib mt demos perl sf dep VMS
WDIRS= windows
LIBS= libcrypto.a libssl.a
SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
SHARED_SSL=libssl$(SHLIB_EXT)
SHARED_LIBS=$(SHARED_CRYPTO) $(SHARED_SSL)
SHARED_LIBS_LINK_EXTS=.so.$(SHLIB_MAJOR) .so
SHARED_LDFLAGS=
GENERAL= Makefile
BASENAME= gmssl
NAME= $(BASENAME)-$(VERSION)
TARFILE= $(NAME).tar
WTARFILE= $(NAME)-win.tar
EXHEADER= e_os2.h
HEADER= e_os.h
all: Makefile build_all
# as we stick to -e, CLEARENV ensures that local variables in lower
# Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn
# shell, which [annoyingly enough] terminates unset with error if VAR
# is not present:-( TOP= && unset TOP is tribute to HP-UX /bin/sh,
# which terminates unset with error if no variable was present:-(
CLEARENV= TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS} \
$${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES} \
$${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC} \
$${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL} \
$${EXHEADER+EXHEADER} $${HEADER+HEADER} \
$${GENERAL+GENERAL} $${CFLAGS+CFLAGS} \
$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS} \
$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS} \
$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS} \
$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
BUILDENV= PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \
CC='$(CC)' CFLAG='$(CFLAG)' \
AS='$(CC)' ASFLAG='$(CFLAG) -c' \
AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)' \
CROSS_COMPILE='$(CROSS_COMPILE)' \
PERL='$(PERL)' ENGDIRS='$(ENGDIRS)' \
SDIRS='$(SDIRS)' LIBRPATH='$(INSTALLTOP)/$(LIBDIR)' \
INSTALL_PREFIX='$(INSTALL_PREFIX)' \
INSTALLTOP='$(INSTALLTOP)' OPENSSLDIR='$(OPENSSLDIR)' \
LIBDIR='$(LIBDIR)' \
MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD $(MAKEDEPPROG)' \
DEPFLAG='-DOPENSSL_NO_DEPRECATED $(DEPFLAG)' \
MAKEDEPPROG='$(MAKEDEPPROG)' \
SHARED_LDFLAGS='$(SHARED_LDFLAGS)' \
KRB5_INCLUDES='$(KRB5_INCLUDES)' LIBKRB5='$(LIBKRB5)' \
ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)' \
EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)' \
SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)' \
PEX_LIBS='$(PEX_LIBS)' EX_LIBS='$(EX_LIBS)' \
CPUID_OBJ='$(CPUID_OBJ)' BN_ASM='$(BN_ASM)' \
EC_ASM='$(EC_ASM)' DES_ENC='$(DES_ENC)' \
AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)' \
BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)' \
RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)' \
SHA1_ASM_OBJ='$(SHA1_ASM_OBJ)' \
MD5_ASM_OBJ='$(MD5_ASM_OBJ)' \
RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)' \
WP_ASM_OBJ='$(WP_ASM_OBJ)' \
MODES_ASM_OBJ='$(MODES_ASM_OBJ)' \
ENGINES_ASM_OBJ='$(ENGINES_ASM_OBJ)' \
PERLASM_SCHEME='$(PERLASM_SCHEME)' \
FIPSLIBDIR='${FIPSLIBDIR}' \
FIPSDIR='${FIPSDIR}' \
FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}" \
THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
# which in turn eliminates ambiguities in variable treatment with -e.
# BUILD_CMD is a generic macro to build a given target in a given
# subdirectory. The target must be given through the shell variable
# `target' and the subdirectory to build in must be given through `dir'.
# This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or
# BUILD_ONE_CMD instead.
#
# BUILD_ONE_CMD is a macro to build a given target in a given
# subdirectory if that subdirectory is part of $(DIRS). It requires
# exactly the same shell variables as BUILD_CMD.
#
# RECURSIVE_BUILD_CMD is a macro to build a given target in all
# subdirectories defined in $(DIRS). It requires that the target
# is given through the shell variable `target'.
BUILD_CMD= if [ -d "$$dir" ]; then \
( cd $$dir && echo "making $$target in $$dir..." && \
$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
) || exit 1; \
fi
RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
BUILD_ONE_CMD=\
if expr " $(DIRS) " : ".* $$dir " >/dev/null 2>&1; then \
$(BUILD_CMD); \
fi
reflect:
@[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
sub_all: build_all
build_all: build_libs build_apps build_tests build_tools
build_libs: build_libcrypto build_libssl openssl.pc
build_libcrypto: build_crypto build_engines libcrypto.pc
build_libssl: build_ssl libssl.pc
build_crypto:
@dir=crypto; target=all; $(BUILD_ONE_CMD)
build_ssl: build_crypto
@dir=ssl; target=all; $(BUILD_ONE_CMD)
build_engines: build_crypto
@dir=engines; target=all; $(BUILD_ONE_CMD)
build_apps: build_libs
@dir=apps; target=all; $(BUILD_ONE_CMD)
build_tests: build_libs
@dir=test; target=all; $(BUILD_ONE_CMD)
build_tools: build_libs
@dir=tools; target=all; $(BUILD_ONE_CMD)
all_testapps: build_libs build_testapps
build_testapps:
@dir=crypto; target=testapps; $(BUILD_ONE_CMD)
fips_premain_dso$(EXE_EXT): libcrypto.a
[ -z "$(FIPSCANLIB)" ] || $(CC) $(CFLAG) -Iinclude \
-DFINGERPRINT_PREMAIN_DSO_LOAD -o $@ \
$(FIPSLIBDIR)fips_premain.c $(FIPSLIBDIR)fipscanister.o \
libcrypto.a $(EX_LIBS)
libcrypto$(SHLIB_EXT): libcrypto.a fips_premain_dso$(EXE_EXT)
@if [ "$(SHLIB_TARGET)" != "" ]; then \
if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
FIPSLD_LIBCRYPTO=libcrypto.a ; \
FIPSLD_CC="$(CC)"; CC=$(FIPSDIR)/bin/fipsld; \
export CC FIPSLD_CC FIPSLD_LIBCRYPTO; \
fi; \
$(MAKE) -e SHLIBDIRS=crypto CC="$${CC:-$(CC)}" build-shared && \
(touch -c fips_premain_dso$(EXE_EXT) || :); \
else \
echo "There's no support for shared libraries on this platform" >&2; \
exit 1; \
fi
libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
@if [ "$(SHLIB_TARGET)" != "" ]; then \
$(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \
else \
echo "There's no support for shared libraries on this platform" >&2; \
exit 1; \
fi
clean-shared:
@set -e; for i in $(SHLIBDIRS); do \
if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
tmp="$(SHARED_LIBS_LINK_EXTS)"; \
for j in $${tmp:-x}; do \
( set -x; rm -f lib$$i$$j ); \
done; \
fi; \
( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
if expr "$(PLATFORM)" : "Cygwin" >/dev/null; then \
( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
fi; \
done
link-shared:
@ set -e; for i in $(SHLIBDIRS); do \
$(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
symlink.$(SHLIB_TARGET); \
libs="$$libs -l$$i"; \
done
build-shared: do_$(SHLIB_TARGET) link-shared
do_$(SHLIB_TARGET):
@ set -e; libs='-L. $(SHLIBDEPS)'; for i in $(SHLIBDIRS); do \
if [ "$$i" = "ssl" -a -n "$(LIBKRB5)" ]; then \
libs="$(LIBKRB5) $$libs"; \
fi; \
$(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
LIBDEPS="$$libs $(EX_LIBS)" \
link_a.$(SHLIB_TARGET); \
libs="-l$$i $$libs"; \
done
libcrypto.pc: Makefile
@ ( echo 'prefix=$(INSTALLTOP)'; \
echo 'exec_prefix=$${prefix}'; \
echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
echo 'includedir=$${prefix}/include'; \
echo ''; \
echo 'Name: OpenSSL-libcrypto'; \
echo 'Description: OpenSSL cryptography library'; \
echo 'Version: '$(VERSION); \
echo 'Requires: '; \
echo 'Libs: -L$${libdir} -lcrypto'; \
echo 'Libs.private: $(EX_LIBS)'; \
echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
libssl.pc: Makefile
@ ( echo 'prefix=$(INSTALLTOP)'; \
echo 'exec_prefix=$${prefix}'; \
echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
echo 'includedir=$${prefix}/include'; \
echo ''; \
echo 'Name: OpenSSL-libssl'; \
echo 'Description: Secure Sockets Layer and cryptography libraries'; \
echo 'Version: '$(VERSION); \
echo 'Requires.private: libcrypto'; \
echo 'Libs: -L$${libdir} -lssl'; \
echo 'Libs.private: $(EX_LIBS)'; \
echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
openssl.pc: Makefile
@ ( echo 'prefix=$(INSTALLTOP)'; \
echo 'exec_prefix=$${prefix}'; \
echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
echo 'includedir=$${prefix}/include'; \
echo ''; \
echo 'Name: OpenSSL'; \
echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
echo 'Version: '$(VERSION); \
echo 'Requires: libssl libcrypto' ) > openssl.pc
Makefile: Makefile.org Configure config
@echo "Makefile is older than Makefile.org, Configure or config."
@echo "Reconfigure the source tree (via './config' or 'perl Configure'), please."
@false
libclean:
rm -f *.map *.so *.so.* *.dylib *.dll engines/*.so engines/*.dll engines/*.dylib *.a engines/*.a */lib */*/lib
clean: libclean
rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
@set -e; target=clean; $(RECURSIVE_BUILD_CMD)
rm -f $(LIBS)
rm -f openssl.pc libssl.pc libcrypto.pc
rm -f speed.* .pure
rm -f $(TARFILE)
@set -e; for i in $(ONEDIRS) ;\
do \
rm -fr $$i/*; \
done
makefile.one: files
$(PERL) util/mk1mf.pl >makefile.one; \
sh util/do_ms.sh
files:
$(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
@set -e; target=files; $(RECURSIVE_BUILD_CMD)
links:
@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
@set -e; target=links; $(RECURSIVE_BUILD_CMD)
gentests:
@(cd test && echo "generating dummy tests (if needed)..." && \
$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on generate );
dclean:
rm -rf *.bak include/openssl certs/.0
@set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
rehash: rehash.time
rehash.time: certs apps
@if [ -z "$(CROSS_COMPILE)" ]; then \
(OPENSSL="`pwd`/util/opensslwrap.sh"; \
[ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
OPENSSL_DEBUG_MEMORY=on; \
export OPENSSL OPENSSL_DEBUG_MEMORY; \
$(PERL) tools/c_rehash certs/demo) && \
touch rehash.time; \
else :; fi
test: tests
tests: rehash
@(cd test && echo "testing..." && \
$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on OPENSSL_CONF=../apps/openssl.cnf tests );
OPENSSL_CONF=apps/openssl.cnf util/opensslwrap.sh version -a
report:
@$(PERL) util/selftest.pl
update: errors stacks util/libeay.num util/ssleay.num TABLE
@set -e; target=update; $(RECURSIVE_BUILD_CMD)
depend:
@set -e; target=depend; $(RECURSIVE_BUILD_CMD)
lint:
@set -e; target=lint; $(RECURSIVE_BUILD_CMD)
tags:
rm -f TAGS
find . -name '[^.]*.[ch]' | xargs etags -a
errors:
$(PERL) util/ck_errf.pl -strict */*.c */*/*.c
$(PERL) util/mkerr.pl -recurse -write
(cd engines; $(MAKE) PERL=$(PERL) errors)
stacks:
$(PERL) util/mkstack.pl -write
util/libeay.num::
$(PERL) util/mkdef.pl crypto update
util/ssleay.num::
$(PERL) util/mkdef.pl ssl update
TABLE: Configure
(echo 'Output of `Configure TABLE'"':"; \
$(PERL) Configure TABLE) > TABLE
# Build distribution tar-file. As the list of files returned by "find" is
# pretty long, on several platforms a "too many arguments" error or similar
# would occur. Therefore the list of files is temporarily stored into a file
# and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
# tar does not support the --files-from option.
tar:
find . -type d -print | xargs chmod 755
find . -type f -print | xargs chmod a+r
find . -type f -perm -0100 -print | xargs chmod a+x
find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort > ../$(TARFILE).list; \
$(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list -cvf - | \
tardy --user_number=0 --user_name=openssl \
--group_number=0 --group_name=openssl \
--prefix=openssl-$(VERSION) - |\
gzip --best >../$(TARFILE).gz; \
rm -f ../$(TARFILE).list; \
ls -l ../$(TARFILE).gz
tar-snap:
@$(TAR) $(TARFLAGS) -cvf - \
`find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \! -name '*.so' \! -name '*.so.*' \! -name 'openssl' \! -name '*test' \! -name '.#*' \! -name '*~' | sort` |\
tardy --user_number=0 --user_name=openssl \
--group_number=0 --group_name=openssl \
--prefix=openssl-$(VERSION) - > ../$(TARFILE);\
ls -l ../$(TARFILE)
dist:
$(PERL) Configure dist
@$(MAKE) dist_pem_h
@$(MAKE) SDIRS='$(SDIRS)' clean
@$(MAKE) TAR='$(TAR)' TARFLAGS='$(TARFLAGS)' tar
dist_pem_h:
(cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean)
install: all install_sw
install_sw:
@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR) \
$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines \
$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig \
$(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
$(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
$(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
$(INSTALL_PREFIX)$(OPENSSLDIR)/private
@set -e; headerlist="$(EXHEADER)"; for i in $$headerlist;\
do \
(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
done;
@set -e; target=install; $(RECURSIVE_BUILD_CMD)
@set -e; liblist="$(LIBS)"; for i in $$liblist ;\
do \
if [ -f "$$i" ]; then \
( echo installing $$i; \
cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i ); \
fi; \
done;
@set -e; if [ -n "$(SHARED_LIBS)" ]; then \
tmp="$(SHARED_LIBS)"; \
for i in $${tmp:-x}; \
do \
if [ -f "$$i" -o -f "$$i.a" ]; then \
( echo installing $$i; \
if expr "$(PLATFORM)" : "Cygwin" >/dev/null; then \
c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
else \
cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
fi ); \
if expr $(PLATFORM) : 'mingw' > /dev/null; then \
( case $$i in \
*crypto*) i=libeay32.dll;; \
*ssl*) i=ssleay32.dll;; \
esac; \
echo installing $$i; \
cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
fi; \
fi; \
done; \
( here="`pwd`"; \
cd $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR); \
$(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
if [ "$(INSTALLTOP)" != "/usr" ]; then \
echo 'OpenSSL shared libraries have been installed in:'; \
echo ' $(INSTALLTOP)'; \
echo ''; \
sed -e '1,/^$$/d' doc/openssl-shared.txt; \
fi; \
fi
cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc
cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc
cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
install_html_docs:
here="`pwd`"; \
filecase=; \
case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
filecase=-i; \
esac; \
for subdir in apps crypto ssl; do \
mkdir -p $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
for i in doc/$$subdir/*.pod; do \
fn=`basename $$i .pod`; \
echo "installing html/$$fn.$(HTMLSUFFIX)"; \
cat $$i \
| sed -r 's/L<([^)]*)(\([0-9]\))?\|([^)]*)(\([0-9]\))?>/L<\1|\3>/g' \
| pod2html --podroot=doc --htmlroot=.. --podpath=apps:crypto:ssl \
| sed -r 's/ $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \
$(PERL) util/extract-names.pl < $$i | \
grep -v $$filecase "^$$fn\$$" | \
(cd $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
while read n; do \
PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$(HTMLSUFFIX) "$$n".$(HTMLSUFFIX); \
done); \
done; \
done
install_docs:
@$(PERL) $(TOP)/util/mkdir-p.pl \
$(INSTALL_PREFIX)$(MANDIR)/man1 \
$(INSTALL_PREFIX)$(MANDIR)/man3 \
$(INSTALL_PREFIX)$(MANDIR)/man5 \
$(INSTALL_PREFIX)$(MANDIR)/man7
@pod2man="`cd ./util; ./pod2mantest $(PERL)`"; \
here="`pwd`"; \
filecase=; \
case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
filecase=-i; \
esac; \
set -e; for i in doc/apps/*.pod; do \
fn=`basename $$i .pod`; \
sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
(cd `$(PERL) util/dirname.pl $$i`; \
sh -c "$$pod2man \
--section=$$sec --center=OpenSSL \
--release=$(VERSION) `basename $$i`") \
> $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
$(PERL) util/extract-names.pl < $$i | \
(grep -v $$filecase "^$$fn\$$"; true) | \
(grep -v "[ ]"; true) | \
(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
while read n; do \
PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
done); \
done; \
set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
fn=`basename $$i .pod`; \
sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
(cd `$(PERL) util/dirname.pl $$i`; \
sh -c "$$pod2man \
--section=$$sec --center=OpenSSL \
--release=$(VERSION) `basename $$i`") \
> $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
$(PERL) util/extract-names.pl < $$i | \
(grep -v $$filecase "^$$fn\$$"; true) | \
(grep -v "[ ]"; true) | \
(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
while read n; do \
PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
done); \
done
# DO NOT DELETE THIS LINE -- make depend depends on it.
开始构建
[yeqiang@localhost GmSSL]$ make depend
[yeqiang@localhost GmSSL]$ make查看构建好的动态库
[yeqiang@localhost GmSSL]$ ls lib* -l
-rw-rw-r--. 1 yeqiang yeqiang 4107704 Feb 7 10:21 libcrypto.a
-rw-rw-r--. 1 yeqiang yeqiang 327 Feb 7 10:21 libcrypto.pc
lrwxrwxrwx. 1 yeqiang yeqiang 18 Feb 7 10:21 libcrypto.so -> libcrypto.so.1.0.0
-rwxrwxr-x. 1 yeqiang yeqiang 2263312 Feb 7 10:21 libcrypto.so.1.0.0
-rw-rw-r--. 1 yeqiang yeqiang 744408 Feb 7 10:21 libssl.a
-rw-rw-r--. 1 yeqiang yeqiang 357 Feb 7 10:21 libssl.pc
lrwxrwxrwx. 1 yeqiang yeqiang 15 Feb 7 10:21 libssl.so -> libssl.so.1.0.0
-rwxrwxr-x. 1 yeqiang yeqiang 476848 Feb 7 10:21 libssl.so.1.0.0
[yeqiang@localhost GmSSL]$ file libcrypto.so.1.0.0
libcrypto.so.1.0.0: ELF 64-bit LSB shared object, ARM aarch64, version 1 (SYSV), dynamically linked, not stripped
[yeqiang@localhost GmSSL]$ file libssl.so.1.0.0
libssl.so.1.0.0: ELF 64-bit LSB shared object, ARM aarch64, version 1 (SYSV), dynamically linked, not stripped