单片机模拟I2C总线及24C02(I2C EEPROM)读写实例（源代码）
/* 51系列单片机在使用时，有时需要模拟I2C总线， */
/* 这里举出一个实例（读写串行EEPROM芯片at2402） */
/************************************************************************/
/* Name:AT24C02存储器的读写程序,用到I2C总线,含相对独立的I2C总线读写函数 */
/* Language: C51单片机编程语言 */
/* Platform: Win98,Intel Celeron 433 Processor,伟福仿真器，仿真8751 */
/* Author: StephenZhu [email protected] */
/* Date: 2003年5月21日,5月22日,5月29日 */
/* Version: 1.1.1 */
/* Others: None */
/************************************************************************/
#include
#include
#include
#define DELAY_TIME 60 /*经实验，不要小于50！否则可能造成时序混乱*/
#define TRUE 1
#define FALSE 0
sbit SCL=P1^7;/*假设由P1.7和P1.6控制*/
sbit SDA=P1^6;
/********** Function Definition 函数定义 ************/
void DELAY(unsigned int t) /*延时函数*/
{
while(t!=0)
t--;
}
void I2C_Start(void)
{
/*启动I2C总线的函数，当SCL为高电平时使SDA产生一个负跳变*/
SDA=1;
SCL=1;
DELAY(DELAY_TIME);
SDA=0;
DELAY(DELAY_TIME);
SCL=0;
DELAY(DELAY_TIME);
}
void I2C_Stop(void)
{
/*终止I2C总线，当SCL为高电平时使SDA产生一个正跳变*/
SDA=0;
SCL=1;
DELAY(DELAY_TIME);
SDA=1;
DELAY(DELAY_TIME);
SCL=0;
DELAY(DELAY_TIME);
}
void SEND_0(void) /* SEND ACK */
{
/*发送0，在SCL为高电平时使SDA信号为低*/
SDA=0;
SCL=1;
DELAY(DELAY_TIME);
SCL=0;
DELAY(DELAY_TIME);
}
void SEND_1(void)
{
/*发送1，在SCL为高电平时使SDA信号为高*/
SDA=1;
SCL=1;
DELAY(DELAY_TIME);
SCL=0;
DELAY(DELAY_TIME);
}
bit Check_Acknowledge(void)
{
/*发送完一个字节后检验设备的应答信号*/
SDA=1;
SCL=1;
DELAY(DELAY_TIME/2);
F0=SDA;
DELAY(DELAY_TIME/2);
SCL=0;
DELAY(DELAY_TIME);
if(F0==1)
return FALSE;
return TRUE;
}
void WriteI2CByte(char b)reentrant
{
/*向I2C总线写一个字节*/
char i;
for(i=0;i<8;i++)
if((b<
else
SEND_0();
}
char ReadI2CByte(void)reentrant
{
/*从I2C总线读一个字节*/
char b=0,i;
for(i=0;i<8;i++)
{
SDA=1; /*释放总线*/
SCL=1; /*接受数据*/
DELAY(10);
F0=SDA;
DELAY(10);
SCL=0;
if(F0==1)
{
b=b<<1;
b=b|0x01;
}
else
b=b<<1;
}
return b;
}
/**********以下为读写24c02的函数**********/
void Write_One_Byte(char addr,char thedata)
{
bit acktemp=1;
/*write a byte to mem*/
I2C_Start();
WriteI2CByte(0xa0);
acktemp=Check_Acknowledge();
WriteI2CByte(addr);/*address*/
acktemp=Check_Acknowledge();
WriteI2CByte(thedata);/*thedata*/
acktemp=Check_Acknowledge();
I2C_Stop();
}
void Write_A_Page(char *buffer,char addr)
{
bit acktemp=1;
bit wrtmp;
int i;
/*write a page to at24c02*/
I2C_Start();
WriteI2CByte(0xa0);
acktemp=Check_Acknowledge();
WriteI2CByte(addr);/*address*/
acktemp=Check_Acknowledge();
for(i=0;i<7;i++)
{
WriteI2CByte(buffer[i]);
if(!Check_Acknowledge())
{
I2C_Stop();
}
}
I2C_Stop();
}
char Read_One_Byte(char addr)
{ bit acktemp=1;
char mydata;
/*read a byte from mem*/
I2C_Start();
WriteI2CByte(0xa0);
acktemp=Check_Acknowledge();
WriteI2CByte(addr);/*address*/
acktemp=Check_Acknowledge();
I2C_Start();
WriteI2CByte(0xa1);
acktemp=Check_Acknowledge();
mydata=ReadI2CByte();
acktemp=Check_Acknowledge();
return mydata;
I2C_Stop();
}
void Read_N_Bytes(char *buffer,char n,char addr)
{
bit acktemp=1;
int i=0;
/*read 8 bytes from mem*/
I2C_Start();
WriteI2CByte(0xa0);
acktemp=Check_Acknowledge();
WriteI2CByte(addr);/*address*/
acktemp=Check_Acknowledge();
I2C_Start();
WriteI2CByte(0xa1);
acktemp=Check_Acknowledge();
for(i=0;i
buffer[i]=ReadI2CByte();
if(i!=n-1)
SEND_0(); /*发送应答*/
else
SEND_1(); /*发送非应答*/
}
I2C_Stop();
}
void main()
{
int i;
char mybyte;
char myarray[8];
char myarray2[8];
char rdarray[16];
for(i=0;i<8;i++)
{
myarray[i]=i;
myarray2[i]=i+0x08;
}
Write_One_Byte(0x20,0x28);
Write_A_Page(myarray,0x10);
Write_A_Page(myarray2,0x18);
mybyte=Read_One_Byte(0x20);
Read_N_Bytes(rdarray,16,0x10);
}