51单片机——蜂鸣器播放提示音C程序

#include 
#include 

//蜂鸣器端口：
sbit Buzzer=P1^5;

/**
  * @brief  蜂鸣器私有延时函数，延时500us
  * @param  无
  * @retval 无
  */
void Buzzer_Delay500us()		//@12.000MHz
{
	unsigned char i;

	_nop_();
	i = 247;
	while (--i);
}

/**
  * @brief  蜂鸣器发声
  * @param  ms 发声的时长，范围：0~32767
  * @retval 无
  */
void Buzzer_Time(unsigned int ms)
{
	unsigned int i;
	for(i=0;i<ms*2;i++)
	{
		Buzzer=!Buzzer;
		Buzzer_Delay500us();
	}
}

#include 
#include "Delay.h"

unsigned char NixieTable[]={0x3F,0x06,0x5B,0x4F,0x66,0x6D,0x7D,0x07,0x7F,0x6F};

void Nixie(unsigned char Location,Number)
{
	switch(Location)
	{
		case 1:P2_4=1;P2_3=1;P2_2=1;break;
		case 2:P2_4=1;P2_3=1;P2_2=0;break;
		case 3:P2_4=1;P2_3=0;P2_2=1;break;
		case 4:P2_4=1;P2_3=0;P2_2=0;break;
		case 5:P2_4=0;P2_3=1;P2_2=1;break;
		case 6:P2_4=0;P2_3=1;P2_2=0;break;
		case 7:P2_4=0;P2_3=0;P2_2=1;break;
		case 8:P2_4=0;P2_3=0;P2_2=0;break;
	}
	P0=NixieTable[Number];
//	Delay(1);
//	P0=0x00;
}

#include 
#include "Delay.h"

/**
  * @brief  获取独立按键键码
  * @param  无
  * @retval 按下按键的键码，范围：0~4，无按键按下时返回值为0
  */
unsigned char Key()
{
	unsigned char KeyNumber=0;
	
	if(P3_1==0){Delay(20);while(P3_1==0);Delay(20);KeyNumber=1;}
	if(P3_0==0){Delay(20);while(P3_0==0);Delay(20);KeyNumber=2;}
	if(P3_2==0){Delay(20);while(P3_2==0);Delay(20);KeyNumber=3;}
	if(P3_3==0){Delay(20);while(P3_3==0);Delay(20);KeyNumber=4;}
	
	return KeyNumber;
}

void Delay(unsigned int xms)
{
	unsigned char i, j;
	while(xms--)
	{
		i = 2;
		j = 239;
		do
		{
			while (--j);
		} while (--i);
	}
}

#include 
#include "Delay.h"
#include "Key.h"
#include "Nixie.h"
#include "Buzzer.h"


unsigned char KeyNum;

void main()
{
	Nixie(1,0);
	while(1)
	{
		KeyNum=Key();
		if(KeyNum)
		{
			Buzzer_Time(100);
			Nixie(1,KeyNum);
		}
	}
}