centos7部署skywalking5.0.0-RC2

应用elasticsearch6.4版本
skywalking5.0.0-RC2
*第一次部署的是skywalking5.0.0-beta2,应用elasticsearch5.6.10版本,不支持elasticsearch6.4版本

#部署elasticsearch(忽略)
#1启动elasticsearch:切换用户
[root@centos7 ~]# su es
#2后台一直启动
[root@centos7 bin~]$ ./elasticsearch &
#elasticsearch的config/elasticsearch.yml配置如下：

cluster.name: CollectorDBCluster
network.host: 0.0.0.0
http.port: 9200

部署skywalking5.0.0-RC2
*注意skywalking会使用(8080, 10800, 11800, 12800)端口，因此先排除端口占用情况。
1.skywalking官网下载skywalking版本包

http://skywalking.apache.org/

2.解压包

tar -zxvf apache-skywalking-apm-incubating-5.0.0-RC2.tar.gz

3.配置/apache-skywalking-apm-incubating/config/application.yml

# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

#cluster:
#  zookeeper:
#    hostPort: localhost:2181
#    sessionTimeout: 100000
naming:
  jetty:
    #OS real network IP(binding required), for agent to find collector cluster
    host: 10.0.86.208
    port: 10800
    contextPath: /
cache:
#  guava:
  caffeine:
remote:
  gRPC:
    # OS real network IP(binding required), for collector nodes communicate with each other in cluster. collectorN --(gRPC) --> collectorM
    host: 10.0.86.208
    port: 11800
agent_gRPC:
  gRPC:
    #OS real network IP(binding required), for agent to uplink data(trace/metrics) to collector. agent--(gRPC)--> collector
    host: 10.0.86.208
    port: 11800
    # Set these two setting to open ssl
    #sslCertChainFile: $path
    #sslPrivateKeyFile: $path

    # Set your own token to active auth
    #authentication: xxxxxx
agent_jetty:
  jetty:
    # OS real network IP(binding required), for agent to uplink data(trace/metrics) to collector through HTTP. agent--(HTTP)--> collector
    # SkyWalking native Java/.Net/node.js agents don't use this.
    # Open this for other implementor.
    host: 10.0.86.208
    port: 12800
    contextPath: /
analysis_register:
  default:
analysis_jvm:
  default:
analysis_segment_parser:
  default:
    bufferFilePath: ../buffer/
    bufferOffsetMaxFileSize: 10M
    bufferSegmentMaxFileSize: 500M
    bufferFileCleanWhenRestart: true
ui:
  jetty:
    # Stay in `localhost` if UI starts up in default mode.
    # Change it to OS real network IP(binding required), if deploy collector in different machine.
    host: 10.0.86.208
    port: 12800
    contextPath: /
storage:
  elasticsearch:
    clusterName: CollectorDBCluster
    clusterTransportSniffer: true
    clusterNodes: 10.0.86.202:9300
    indexShardsNumber: 2
    indexReplicasNumber: 0
    highPerformanceMode: true
    # Batch process setting, refer to https://www.elastic.co/guide/en/elasticsearch/client/java-api/5.5/java-docs-bulk-processor.html
    bulkActions: 2000 # Execute the bulk every 2000 requests
    bulkSize: 20 # flush the bulk every 20mb
    flushInterval: 10 # flush the bulk every 10 seconds whatever the number of requests
    concurrentRequests: 2 # the number of concurrent requests
    # Set a timeout on metric data. After the timeout has expired, the metric data will automatically be deleted.
    traceDataTTL: 90 # Unit is minute
    minuteMetricDataTTL: 90 # Unit is minute
    hourMetricDataTTL: 36 # Unit is hour
    dayMetricDataTTL: 45 # Unit is day
    monthMetricDataTTL: 18 # Unit is month
#storage:
#  h2:
#    url: jdbc:h2:~/memorydb
#    userName: sa
configuration:
  default:
    #namespace: xxxxx
    # alarm threshold
    applicationApdexThreshold: 2000
    serviceErrorRateThreshold: 10.00
    serviceAverageResponseTimeThreshold: 2000
    instanceErrorRateThreshold: 10.00
    instanceAverageResponseTimeThreshold: 2000
    applicationErrorRateThreshold: 10.00
    applicationAverageResponseTimeThreshold: 2000
    # thermodynamic
    thermodynamicResponseTimeStep: 50
    thermodynamicCountOfResponseTimeSteps: 40
    # max collection's size of worker cache collection, setting it smaller when collector OutOfMemory crashed.
    workerCacheMaxSize: 10000
#receiver_zipkin:
#  default:
#    host: localhost
#    port: 9411
#    contextPath: /

*注：host为服务器的Ip

torage:
  elasticsearch:
    clusterName: CollectorDBCluster
    clusterTransportSniffer: true
    clusterNodes: 10.0.86.202:9300

CollectorDBCluster为连接elasticsearch与config/elasticsearch.yml下的cluster.name: CollectorDBCluster一致clusterNodes的ip:端口,为装elasticsearch的服务器ip:9300

#vim /apache-skywalking-apm-incubating/webapp/webapp.yml配置如下：

# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

server:
  port: 8080

collector:
  path: /graphql
  ribbon:
    ReadTimeout: 10000
    listOfServers: 10.0.86.208:10800

security:
  user:
    admin:
      password: admin

8080默认端口，登录skywalking是用户名admin,密码admin

#vim /apache-skywalking-apm-incubating/agent/config/agent.config配置如下

# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# The agent namespace
# agent.namespace=default-namespace

# The application name in UI
agent.application_code = CollectorDBCluster

# The number of sampled traces per 3 seconds
# Negative number means sample traces as many as possible, most likely 100%
# agent.sample_n_per_3_secs=-1

# Authentication active is based on backend setting, see application.yml for more details.
# agent.authentication = xxxx

# The max amount of spans in a single segment.
# Through this config item, skywalking keep your application memory cost estimated.
# agent.span_limit_per_segment=300

# Ignore the segments if their operation names start with these suffix.
# agent.ignore_suffix=.jpg,.jpeg,.js,.css,.png,.bmp,.gif,.ico,.mp3,.mp4,.html,.svg

# If true, skywalking agent will save all instrumented classes files in `/debugging` folder.
# Skywalking team may ask for these files in order to resolve compatible problem.
# agent.is_open_debugging_class = true

# Server addresses.
# Primary address setting.
#
# Mapping to `naming/jetty/ip:port` in `config/application.yml` of Collector.
# Examples：
# Single collector：SERVERS="127.0.0.1:8080"
# Collector cluster：SERVERS="10.2.45.126:8080,10.2.45.127:7600"
collector.servers=10.0.86.208:10800

# Collector agent_gRPC/grpc service addresses.
# Secondary address setting, only effect when "collector.servers" is empty.
# By using this, no discovery mechanism provided. The agent only uses these addresses to uplink data.
# Recommend to use this only when collector cluster IPs are unreachable from agent side. Such as:
#   1. Agent and collector cluster are in different VPC in Cloud.
#   2. Agent uplinks data to collector cluster through Internet.
# collector.direct_servers=www.skywalking.service.io

# Collector 接受追踪信息REST-Service 服务名称.
# 默认不需要修改
collector.service_name=/segments
 
# 向collector发送数据时，单次调用的最大容量
collector.batch_size=50
 
# 内部缓冲池大小，此值必须是2的指数倍。
buffer.size=512


# 日志文件名称前缀
logging.file_name=skywalking-agent.log

# 日志文件最大大小
# 如果超过此大小，则会生成新文件。
# 默认为300M
logging.max_file_size=314572800

# 日志级别，默认为DEBUG。
logging.level=DEBUG

*注：agent.application_code = CollectorDBCluster与application.yml下clusterName: CollectorDBCluster与elasticsearch下cluster.name: CollectorDBCluster相同

#启动skywalking
1.进入/apache-skywalking-apm-incubating/bin
启动./startup.sh
2.进入/apache-skywalking-apm-incubating/agent
启动java -javaagent:/usr/local/sdb/apache-skywalking-apm-incubating/agent/skywalking-agent.jar -jar /usr/local/sdb/gateway-service1.jar