两个简单例子，分别实现播放、录音的功能
转载文章：https://blog.csdn.net/aa120515692/article/details/47439939
/******************************************************************
ALSA 简单的 playback 例子
******************************************************************/
#define ALSA_PCM_NEW_HW_PARAMS_API
#include
int main() {
long loops;
int rc;
int size;
snd_pcm_t *handle;
snd_pcm_hw_params_t *params;
unsigned int val;
int dir;
snd_pcm_uframes_t frames;
char *buffer;
/* Open PCM device for playback. */
/* 打开 PCM playback 设备 */
rc = snd_pcm_open(&handle, "default",
SND_PCM_STREAM_PLAYBACK, 0);
if (rc < 0) {
fprintf(stderr,
"unable to open pcm device: %s\n",
snd_strerror(rc));
exit(1);
}
/* Allocate a hardware parameters object. */
/* 分配一个硬件参数结构体 */
snd_pcm_hw_params_alloca(¶ms);
/* Fill it in with default values. */
/* 使用默认参数 */
snd_pcm_hw_params_any(handle, params);
/* Set the desired hardware parameters. */
/* 设置硬件参数 */
/* Interleaved mode */
snd_pcm_hw_params_set_access(handle, params,
SND_PCM_ACCESS_RW_INTERLEAVED);
/* Signed 16-bit little-endian format */
/* 数据格式为 16位 小端 */
snd_pcm_hw_params_set_format(handle, params,
SND_PCM_FORMAT_S16_LE);
/* Two channels (stereo) */
/* 两个声道 */
snd_pcm_hw_params_set_channels(handle, params, 2);
/* 44100 bits/second sampling rate (CD quality) */
/* 采样率为 44100 */
val = 44100;
snd_pcm_hw_params_set_rate_near(handle, params,
&val, &dir);
/* Set period size to 32 frames. */
/* 设置一个周期为 32 帧 */
frames = 32;
snd_pcm_hw_params_set_period_size_near(handle,
params, &frames, &dir);
/* Write the parameters to the driver */
/* 把前面设置好的参数写入到playback设备 */
rc = snd_pcm_hw_params(handle, params);
if (rc < 0) {
fprintf(stderr,
"unable to set hw parameters: %s\n",
snd_strerror(rc));
exit(1);
}
/* Use a buffer large enough to hold one period */
/* 得到一个周期的数据长度 */
snd_pcm_hw_params_get_period_size(params, &frames,
&dir);
/* 因为我们是16位 两个通道，所以要 *2*2 也就是 *4 */
size = frames * 4; /* 2 bytes/sample, 2 channels */
buffer = (char *) malloc(size);
/* We want to loop for 5 seconds */
/* 得到一个周期的时间长度 */
snd_pcm_hw_params_get_period_time(params,
&val, &dir);
/* 5 seconds in microseconds divided by
* period time */
loops = 5000000 / val;
while (loops > 0) {
loops--;
/* 从标准输入中获取数据 */
rc = read(0, buffer, size);
if (rc == 0) {
fprintf(stderr, "end of file on input\n");
break;
} else if (rc != size) {
fprintf(stderr,
"short read: read %d bytes\n", rc);
}
/* 播放这些数据 */
rc = snd_pcm_writei(handle, buffer, frames);
if (rc == -EPIPE) {
/* EPIPE means underrun */
fprintf(stderr, "underrun occurred\n");
snd_pcm_prepare(handle);
} else if (rc < 0) {
fprintf(stderr,
"error from writei: %s\n",
snd_strerror(rc));
} else if (rc != (int)frames) {
fprintf(stderr,
"short write, write %d frames\n", rc);
}
}
snd_pcm_drain(handle);
snd_pcm_close(handle);
free(buffer);
return 0;
}
/*********************************************************************
ALSA 简单的录音功能 capture 捕获
*********************************************************************/
/* Use the newer ALSA API */
#define ALSA_PCM_NEW_HW_PARAMS_API
#include
int main() {
long loops;
int rc;
int size;
snd_pcm_t *handle;
snd_pcm_hw_params_t *params;
unsigned int val;
int dir;
snd_pcm_uframes_t frames;
char *buffer;
/* Open PCM device for recording (capture). */
/* 打开 PCM capture 捕获设备 */
rc = snd_pcm_open(&handle, "default",
SND_PCM_STREAM_CAPTURE, 0);
if (rc < 0) {
fprintf(stderr,
"unable to open pcm device: %s\n",
snd_strerror(rc));
exit(1);
}
/* Allocate a hardware parameters object. */
/* 分配一个硬件参数结构体 */
snd_pcm_hw_params_alloca(¶ms);
/* Fill it in with default values. */
/* 使用默认参数 */
snd_pcm_hw_params_any(handle, params);
/* Set the desired hardware parameters. */
/* Interleaved mode */
snd_pcm_hw_params_set_access(handle, params,
SND_PCM_ACCESS_RW_INTERLEAVED);
/* Signed 16-bit little-endian format */
/* 16位 小端 */
snd_pcm_hw_params_set_format(handle, params,
SND_PCM_FORMAT_S16_LE);
/* Two channels (stereo) */
/* 双通道 */
snd_pcm_hw_params_set_channels(handle, params, 2);
/* 44100 bits/second sampling rate (CD quality) */
/* 采样率 */
val = 44100;
snd_pcm_hw_params_set_rate_near(handle, params,
&val, &dir);
/* Set period size to 32 frames. */
/* 一个周期有 32 帧 */
frames = 32;
snd_pcm_hw_params_set_period_size_near(handle,
params, &frames, &dir);
/* Write the parameters to the driver */
/* 参数生效 */
rc = snd_pcm_hw_params(handle, params);
if (rc < 0) {
fprintf(stderr,
"unable to set hw parameters: %s\n",
snd_strerror(rc));
exit(1);
}
/* Use a buffer large enough to hold one period */
/* 得到一个周期的数据大小 */
snd_pcm_hw_params_get_period_size(params,
&frames, &dir);
/* 16位 双通道，所以要 *4 */
size = frames * 4; /* 2 bytes/sample, 2 channels */
buffer = (char *) malloc(size);
/* We want to loop for 5 seconds */
/* 等到一个周期的时间长度 */
snd_pcm_hw_params_get_period_time(params,
&val, &dir);
loops = 5000000 / val;
while (loops > 0) {
loops--;
/* 捕获数据 */
rc = snd_pcm_readi(handle, buffer, frames);
if (rc == -EPIPE) {
/* EPIPE means overrun */
fprintf(stderr, "overrun occurred\n");
snd_pcm_prepare(handle);
} else if (rc < 0) {
fprintf(stderr,
"error from read: %s\n",
snd_strerror(rc));
} else if (rc != (int)frames) {
fprintf(stderr, "short read, read %d frames\n", rc);
}
/* 写入到标准输出中去 */
rc = write(1, buffer, size);
if (rc != size)
fprintf(stderr,
"short write: wrote %d bytes\n", rc);
}
snd_pcm_drain(handle);
snd_pcm_close(handle);
free(buffer);
return 0;
}
编译测试：
aarch64-buildroot-linux-gnu-gcc capture.c -o capture -lasound -I ./alsa/include
aarch64-buildroot-linux-gnu-gcc playback.c -o playback -lasound -I ./alsa/include
可以尝试运行capture程序并把输出定向到某个文件，然后运行playback播放该文件里的声音数据：
./capture > sound.raw
./playback < sound.raw
转载地址：
https://blog.csdn.net/aa120515692/article/details/47439939
https://blog.csdn.net/swq1982/article/details/8045093
特别:
http://www.equalarea.com/paul/alsa-audio.html#captureex