Ubuntu 安装FastFDS 例子,步骤,Ubuntu 安装FastFDS 例子,步骤
1:安装gcc
方法一:
sudo apt-get build-dep gcc
方法二:
sudo apt-get install build-essential
2:安装libevent
1.先用:ls -al /usr/lib | grep libevent 查看是否已安装
2.下载libevent安装包
3.切换到解压后的 libevent 主目录
4:执行:
./configure –prefix=/usr (或 ./configure --program-prefix=/usr)
make
make install
或者可以直接按 http://coffeelover.iteye.com/blog/721675 步骤来安装libevent
3:安装、配置FastFDS具体安装方法:
http://soartju.iteye.com/blog/803477
安装过程中错误整理:
1:sudo ./make.sh 出现:commend not fond
解决办法:使用root账号修改make.sh 的权限 chmoed 777 make.sh
2:make: Nothing to be done for `all'.
解决办法:这句提示是说明你已经编译好了,而且没有对代码进行任何改动。此时在当前目录下你应该看到一个Image 文件。它就是内核编译后得到的bootimage文件。
若想重新编译,可以先删除以前编译产生的目标文件:
make clean
然后再
make
或者不用管继续下一步。
3:出现错误类似:
/home/FastDFS/FastDFS/tracker/../common/sched_thread.c:493: undefined reference to `pthread_create' ../common/pthread_func.o:
In function `init_pthread_lock': /home/FastDFS/FastDFS/tracker/../common/pthread_func.c:32: undefined reference to `pthread_mutexattr_init'
/home/FastDFS/FastDFS/tracker/../common/pthread_func.c:40: undefined reference to `pthread_mutexattr_settype'
/home/FastDFS/FastDFS/tracker/../common/pthread_func.c:57: undefined reference to `pthread_mutexattr_destroy' ../common/pthread_func.o:
In function `init_pthread_attr': /home/FastDFS/FastDFS/tracker/../common/pthread_func.c:84: undefined reference to `pthread_attr_getstacksize'
/home/FastDFS/FastDFS/tracker/../common/pthread_func.c:115: undefined reference to `pthread_attr_setstacksize' ../common/pthread_func.o:
In function `create_work_threads': /home/FastDFS/FastDFS/tracker/../common/pthread_func.c:156: undefined reference to `pthread_create'
../common/pthread_func.o:
In function `kill_work_threads': /home/FastDFS/FastDFS/tracker/../common/pthread_func.c:182: undefined reference to `pthread_kill'
解决办法:
其实是不同的系统中pthread位置不一样,做法就是找到你的系统中所需要的libpthread.so文件位置,直接find就可以找到了;
root@ www.linuxidc.com:~# find / -name 'libpthread.a'
/usr/lib/i386-linux-gnu/xen/libpthread.a
/usr/lib/i386-linux-gnu/libpthread.a
root@ www.linuxidc.com:~# find / -name 'libpthread.so'
/usr/lib/i386-linux-gnu/libpthread.so
找到:libpthread.a 和 libpthread.so 的路径
修改make.sh文件:
把if [ -f /usr/lib/libpthread.so ] || [ -f /usr/local/lib/libpthread.so ] || [ -f /usr/lib64/libpthread.so ] || [ -f /usr/lib/libpthread.a ] || [ -f /usr/local/lib/libpthread.a ] || [ -f /usr/lib64/libpthread.a ]; then LIBS="$LIBS -lpthread"
里面的路径换成刚才查找到的路径
4:进入系统乱码
解决办法:
进入系统后
$sudo vim /etc/environment
LANG="zh_CN.UTF-8"
LANGUAGE="zh_CN:zh"
修改为
LANG="en_GB.UTF-8"
LANGUAGE="en_US:en"
$sudo vim /etc/default/init/locale
修改同上
reboot
来源于:http://www.liusuping.com/ubuntu-linux/ubuntu-linuxe-server-luanma-jiejuebanfa.html
5:1)如果无法执行,则需要先安装gcc,Ubuntu系统可通过:sudo apt-get install gcc 安装。
2)Ubuntu系统上安装时需要将 make.sh 最后一段if去掉(从 if [ "$uname" = "Linux" ]; then 开始到倒数第2行),否则 ./make.sh install 时会报错。
3)执行./make.sh install时可能需要 root 权限