这个需求分为：
1.如何接入libcurl库，
2.如何用libcurl发起get请求，
3.如何将数据保存到沙盒路径下
一.第一个需求，由于libcurl只有源码，需要你自己去编译各平台下的库，怎么编译参考下我写的另一篇文章：编译支持iOS的libcurl+OpenSSL库(支持https IPv6)
然后就是引用libcurl.a库了，记得在build phase里面的link binary with ibraries 里面引用libz.tbd和libresolv.tbd这两个系统库
二.第二个需求，发起请求的方法如下
bool getUrl(const char *filename,char *url)
{
CURL *curl;
CURLcode res;
FILE *fp;
if ((fp = fopen(filename, "wt+")) == NULL){
// 返回结果用文件存储
return false;
}
struct curl_slist *headers = NULL;
//增加HTTP header
headers = curl_slist_append(headers, "Accept:application/json");
headers = curl_slist_append(headers, "Content-Type:application/json");
headers = curl_slist_append(headers, "charset:utf-8");
curl = curl_easy_init(); // 初始化
if (curl)
{
curl_easy_setopt(curl, CURLOPT_HTTPHEADER, headers);// 改协议头
curl_easy_setopt(curl, CURLOPT_URL,url);
curl_easy_setopt(curl, CURLOPT_WRITEDATA, fp);
res = curl_easy_perform(curl); // 执行
NSLog(@"请求返回值是%i",res);
curl_slist_free_all(headers);
curl_easy_cleanup(curl);
}
fclose(fp);
return true;
}
特别提醒， curl_global_init(CURL_GLOBAL_ALL);这个函数是全局初始化函数，只能调用一次，所以最好在didFinishLanuch里面调用，如果在curl_easy_init();之前还未实现，那么libcurl会自动执行一次。所以多线程下最好主动调用该函数以防止在线程中curl_easy_init时多次调用。
这是因为虽然libcurl是线程安全的，但curl_global_init是不能保证线程安全的，所以不要在每个线程中都调用curl_global_init，didFinishLanuch里调用一次就行了。
三. 如何上层调用
由于curl_easy_setopt(curl, CURLOPT_WRITEDATA, fp); 这个方法是c的方法，所以传进来的目录filename也要是c String才行，所以上层调用的时候得这么写：
NSArray *paths =
NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
NSString *documentPath = [paths firstObject];
NSString *filePath = [documentPath stringByAppendingPathComponent:@"wow.log"];
getUrl([filePath cStringUsingEncoding:NSUTF8StringEncoding],"https://www.baidu.com");
这样就可以将获取到数据写入到应用的document目录下，保存为wow.log文件。
四. 对请求的返回值的说明
也就是对 curl_easy_perform()函数返回值的说明，0表示请求正常返回，详情看下面
CURLE_OK = 0, 0: no error
CURLE_UNSUPPORTED_PROTOCOL, 1: unsupported protocol
CURLE_FAILED_INIT, 2: failed init
CURLE_URL_MALFORMAT, 3: URL using bad/illegal format or missing URL
CURLE_URL_MALFORMAT_USER, 4: unknown error
CURLE_COULDNT_RESOLVE_PROXY, 5: couldn't resolve proxy name
CURLE_COULDNT_RESOLVE_HOST, 6: couldn't resolve host name
CURLE_COULDNT_CONNECT, 7: couldn't connect to server
CURLE_FTP_WEIRD_SERVER_REPLY, 8: FTP: weird server reply
CURLE_FTP_ACCESS_DENIED,
CURLE_FTP_USER_PASSWORD_INCORRECT, 10: unknown error
CURLE_FTP_WEIRD_PASS_REPLY, 11: FTP: unknown PASS reply
CURLE_FTP_WEIRD_USER_REPLY, 12: FTP: unknown USER reply
CURLE_FTP_WEIRD_PASV_REPLY, 13: FTP: unknown PASV reply
CURLE_FTP_WEIRD_227_FORMAT, 14: FTP: unknown 227 response format
CURLE_FTP_CANT_GET_HOST, 15: FTP: can't figure out the host in the PASV response
CURLE_FTP_CANT_RECONNECT, 16: FTP: can't connect to server the response code is unknown
CURLE_FTP_COULDNT_SET_BINARY, 17: FTP: couldn't set binary mode
CURLE_PARTIAL_FILE, 18: Transferred a partial file
CURLE_FTP_COULDNT_RETR_FILE, 19: FTP: couldn't retrieve (RETR failed) the specified file
CURLE_FTP_WRITE_ERROR, 20: FTP: the post-transfer acknowledge response was not OK
CURLE_FTP_QUOTE_ERROR, 21: FTP: a quote command returned error
CURLE_HTTP_RETURNED_ERROR, 22: HTTP response code said error
CURLE_WRITE_ERROR, 23: failed writing received data to disk/application
CURLE_MALFORMAT_USER, 24: unknown error
CURLE_UPLOAD_FAILED, 25: upload failed (at start/before it took off)
CURLE_READ_ERROR, 26: failed to open/read local data from file/application
CURLE_OUT_OF_MEMORY, 27: out of memory
CURLE_OPERATION_TIMEOUTED, 28: a timeout was reached
CURLE_FTP_COULDNT_SET_ASCII, 29: FTP could not set ASCII mode (TYPE A)
CURLE_FTP_PORT_FAILED, 30: FTP command PORT failed
CURLE_FTP_COULDNT_USE_REST, 31: FTP command REST failed
CURLE_FTP_COULDNT_GET_SIZE, 32: FTP command SIZE failed
CURLE_HTTP_RANGE_ERROR, 33: a range was requested but the server did not deliver it
CURLE_HTTP_POST_ERROR, 34: internal problem setting up the POST
CURLE_SSL_CONNECT_ERROR, 35: SSL connect error
CURLE_BAD_DOWNLOAD_RESUME, 36: couldn't resume download
CURLE_FILE_COULDNT_READ_FILE, 37: couldn't read a file:// file
CURLE_LDAP_CANNOT_BIND, 38: LDAP: cannot bind
CURLE_LDAP_SEARCH_FAILED, 39: LDAP: search failed
CURLE_LIBRARY_NOT_FOUND, 40: a required shared library was not found
五. 单纯地写一个请求
如果你不需要写入本地，只是想发起请求，当然也是可以的，简化上面的代码，结果如下
CURLcode getUrl(char *url)
{
CURL *curl;
CURLcode res = CURLE_OK;
struct curl_slist *headers = NULL;
//增加HTTP header
headers = curl_slist_append(headers, "Accept:application/json");
headers = curl_slist_append(headers, "Content-Type:application/json");
headers = curl_slist_append(headers, "charset:utf-8");
curl = curl_easy_init(); // 初始化
if (curl)
{
curl_easy_setopt(curl, CURLOPT_HTTPHEADER, headers);// 改协议头
curl_easy_setopt(curl, CURLOPT_URL,url);
res = curl_easy_perform(curl); // 执行
NSLog(@"res===%i",res);
curl_slist_free_all(headers);
curl_easy_cleanup(curl);
}
return res;
}
调用的话就用getUrl("https://www.baidu.com");
打完收工