hushui

Qemu2.x boot sdcard raw image with -M raspi2

# Qemu2.x boot sdcard raw image with -M raspi2

## Qemu info

qemu-system-arm -version

QEMU emulator version 2.9.1

## virtual machine -M raspi2

qemu support raspi2 from 2.6

Note USB/Mouse keyboard is not OK yet for Raspi

## Get vfat partiion from raw image

[lake@galaxy 2019-04-08-raspbian-stretch]$ sudo fdisk -l 2019-04-08-raspbian-stretch.img Disk 2019-04-08-raspbian-stretch.img: 3.2 GiB, 3481272320 bytes, 6799360 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disklabel type: dos

Disk identifier: 0xcd48578f

Device Boot Start End Sectors Size Id Type

2019-04-08-raspbian-stretch.img1 8192 96042 87851 42.9M c W95 FAT32 (LBA)

2019-04-08-raspbian-stretch.img2 98304 6799359 6701056 3.2G 83 Linux

[lake@galaxy 2019-04-08-raspbian-stretch]$ expr 8192 \* 512

4194304

[lake@galaxy 2019-04-08-raspbian-stretch]$ echo 8192*512 |bc

4194304

[lake@galaxy 2019-04-08-raspbian-stretch]$ sudo mount -o loop,offset=4194304 -t vfat 2019-04-08-raspbian-stretch.img boot/

[lake@galaxy 2019-04-08-raspbian-stretch]$ ls -l boot

total 21623

-rwxr-xr-x 1 root root 23315 Sep 20 2018 bcm2708-rpi-0-w.dtb

-rwxr-xr-x 1 root root 22812 Sep 20 2018 bcm2708-rpi-b.dtb

-rwxr-xr-x 1 root root 23071 Sep 20 2018 bcm2708-rpi-b-plus.dtb

-rwxr-xr-x 1 root root 22589 Sep 20 2018 bcm2708-rpi-cm.dtb

-rwxr-xr-x 1 root root 24115 Sep 20 2018 bcm2709-rpi-2-b.dtb

-rwxr-xr-x 1 root root 25311 Sep 20 2018 bcm2710-rpi-3-b.dtb

-rwxr-xr-x 1 root root 25914 Feb 18 2019 bcm2710-rpi-3-b-plus.dtb

-rwxr-xr-x 1 root root 24087 Sep 20 2018 bcm2710-rpi-cm3.dtb

-rwxr-xr-x 1 root root 52296 Feb 18 2019 bootcode.bin

-rwxr-xr-x 1 root root 229 Apr 8 2019 cmdline.txt

-rwxr-xr-x 1 root root 1590 Apr 8 2019 config.txt

-rwxr-xr-x 1 root root 18693 Mar 10 2018 COPYING.linux

-rwxr-xr-x 1 root root 2622 Apr 1 2019 fixup_cd.dat

-rwxr-xr-x 1 root root 6701 Apr 1 2019 fixup.dat

-rwxr-xr-x 1 root root 9750 Apr 1 2019 fixup_db.dat

-rwxr-xr-x 1 root root 9752 Apr 1 2019 fixup_x.dat

-rwxr-xr-x 1 root root 145 Apr 8 2019 issue.txt

-rwxr-xr-x 1 root root 4944992 Feb 18 2019 kernel7.img

-rwxr-xr-x 1 root root 4698056 Feb 18 2019 kernel.img

-rwxr-xr-x 1 root root 1494 Mar 10 2018 LICENCE.broadcom

-rwxr-xr-x 1 root root 18974 Apr 8 2019 LICENSE.oracle

drwxr-xr-x 2 root root 13312 Apr 8 2019 overlays

-rwxr-xr-x 1 root root 683460 Apr 1 2019 start_cd.elf

-rwxr-xr-x 1 root root 4830756 Apr 1 2019 start_db.elf

-rwxr-xr-x 1 root root 2873444 Apr 1 2019 start.elf

-rwxr-xr-x 1 root root 3774980 Apr 1 2019 start_x.elf

[lake@galaxy 2019-04-08-raspbian-stretch]$ mkdir boot2

[lake@galaxy 2019-04-08-raspbian-stretch]$ cp -ar -p boot/* boot2^C

[lake@galaxy 2019-04-08-raspbian-stretch]$ cp -ar -p boot boot2

[lake@galaxy 2019-04-08-raspbian-stretch]$ sudo umount boot

[lake@galaxy 2019-04-08-raspbian-stretch]$

## raw sd image boot fails

[lake@galaxy 2019-04-08-raspbian-stretch]$ qemu-system-arm -M raspi2 -kernel boot/kernel7.img -sd ./2019-04-08-raspbian-stretch.img -append "rw earlyprintk loglevel=8 console=ttyAMA0,115200 dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2" -dtb boot/bcm2709-rpi-2-b.dtb -serial stdio -L /home/lake/usr/share/qemu/
WARNING: Image format was not specified for './2019-04-08-raspbian-stretch.img' and probing guessed raw.
Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
Specify the 'raw' format explicitly to remove the restrictions.
[ 0.000000] Booting Linux on physical CPU 0xf00
[ 0.000000] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[ 0.000000] CPU: ARMv7 Processor [412fc0f1] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x3b800000
[ 0.000000] On node 0 totalpages: 245760
[ 0.000000] free_area_init_node: node 0, pgdat 80c85780, node_mem_map baf84000
[ 0.000000] Normal zone: 2160 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
.....................
[ 8.988788] [<807a1f80>] (kernel_init) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 8.991739] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

#### format=raw to resolve VFS mount issue

[lake@galaxy 2019-04-08-raspbian-stretch]$ qemu-system-arm -M raspi2 -kernel boot/kernel7.img -drive if=sd,index=0,media=disk,format=raw,file=./2019-04-08-raspbian-stretch.img -append "rw earlyprintk loglevel=8 console=ttyAMA0,115200 dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2" -dtb boot/bcm2709-rpi-2-b.dtb -serial stdio -L /home/lake/usr/share/qemu/
[ 0.000000] Booting Linux on physical CPU 0xf00
[ 0.000000] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[ 0.000000] CPU: ARMv7 Processor [412fc0f1] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x3b800000
[ 0.000000] On node 0 totalpages: 245760
[ 0.000000] free_area_init_node: node 0, pgdat 80c85780, node_mem_map baf84000
[ 0.000000] Normal zone: 2160 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 245760 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 17 pages/cpu @baf2e000 s38720 r8192 d22720 u69632
[ 0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 243600
[ 0.000000] Kernel command line: rw earlyprintk loglevel=8 console=ttyAMA0,115200 dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 952376K/983040K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 22472K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xbc800000 - 0xff800000 (1072 MB)
[ 0.000000] lowmem : 0x80000000 - 0xbc000000 ( 960 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x80800000 (8160 kB)
[ 0.000000] .init : 0x80b00000 - 0x80c00000 (1024 kB)
[ 0.000000] .data : 0x80c00000 - 0x80c906d4 ( 578 kB)
[ 0.000000] .bss : 0x80c97ef8 - 0x80d468f0 ( 699 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 25298 entries in 75 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
[ 0.000557] sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns
[ 0.001074] Switching to timer-based delay loop, resolution 16ns
[ 0.031523] Console: colour dummy device 80x30
[ 0.034008] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000)
[ 0.034635] pid_max: default: 32768 minimum: 301
[ 0.044980] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.045171] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.100510] Disabling memory control group subsystem
[ 0.103420] CPU: Testing write buffer coherency: ok
[ 0.107627] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[ 0.149974] CPU0: update cpu_capacity 1024
[ 0.150268] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[ 0.167818] Setting up static identity map for 0x100000 - 0x10003c
[ 0.171762] Hierarchical SRCU implementation.
[ 0.190302] smp: Bringing up secondary CPUs ...
[ 1.258346] CPU1: failed to come online
[ 2.336677] CPU2: failed to come online
[ 3.413207] CPU3: failed to come online
[ 3.414232] smp: Brought up 1 node, 1 CPU
[ 3.414854] SMP: Total of 1 processors activated (125.00 BogoMIPS).
[ 3.415253] CPU: All CPU(s) started in SVC mode.
[ 3.479472] devtmpfs: initialized
[ 3.588631] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[ 3.599790] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[ 3.666981] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 3.670178] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 3.690119] pinctrl core: initialized pinctrl subsystem
[ 3.748122] NET: Registered protocol family 16
[ 3.784216] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 3.839404] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 3.839715] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 3.845367] Serial: AMBA PL011 UART driver
[ 3.894490] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 4.241039] bcm2835-dma 3f007000.dma: DMA legacy API manager at bc813000, dmachans=0x1
[ 4.264962] SCSI subsystem initialized
[ 4.268663] usbcore: registered new interface driver usbfs
[ 4.269977] usbcore: registered new interface driver hub
[ 4.271847] usbcore: registered new device driver usb
[ 4.290794] raspberrypi-firmware soc:firmware: Attached to firmware from 1970-01-05 00:12
[ 4.334289] clocksource: Switched to clocksource arch_sys_counter
[ 4.988925] VFS: Disk quotas dquot_6.6.0
[ 4.989813] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 4.992734] FS-Cache: Loaded
[ 5.006175] CacheFiles: Loaded
[ 5.099735] NET: Registered protocol family 2
[ 5.122011] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 5.122688] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 5.123323] TCP: Hash tables configured (established 8192 bind 8192)
[ 5.127713] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 5.128318] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 5.135240] NET: Registered protocol family 1
[ 5.146308] RPC: Registered named UNIX socket transport module.
[ 5.146515] RPC: Registered udp transport module.
[ 5.146622] RPC: Registered tcp transport module.
[ 5.146709] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.180020] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 1 counters available
[ 5.212097] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 5.287364] FS-Cache: Netfs 'nfs' registered for caching
[ 5.295363] NFS: Registering the id_resolver key type
[ 5.298845] Key type id_resolver registered
[ 5.299016] Key type id_legacy registered
[ 5.299497] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 5.344544] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 5.348823] io scheduler noop registered
[ 5.349066] io scheduler deadline registered
[ 5.351084] io scheduler cfq registered (default)
[ 5.351278] io scheduler mq-deadline registered
[ 5.354011] io scheduler kyber registered
[ 5.381325] BCM2708FB: allocated DMA memory fb900000
[ 5.382768] BCM2708FB: allocated DMA channel 0 @ bc813000
[ 5.464753] Console: switching to colour frame buffer device 100x30
[ 5.516245] bcm2835-rng 3f104000.rng: hwrng registered
[ 5.517725] vc-mem: phys_addr:0x00000000 mem_base=0x00000000 mem_size:0x00000000(0 MiB)
[ 5.523696] vc-sm: Videocore shared memory driver
[ 5.527411] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 5.666027] brd: module loaded
[ 5.748032] loop: module loaded
[ 5.748286] Loading iSCSI transport class v2.0-870.
[ 5.757649] libphy: Fixed MDIO Bus: probed
[ 5.758829] usbcore: registered new interface driver lan78xx
[ 5.759464] usbcore: registered new interface driver smsc95xx
[ 5.759814] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 5.765168] dwc_otg 3f980000.usb: base=0xf0980000
[ 6.006292] Core Release: 0.000
[ 6.006949] Setting default values for core params
[ 6.012980] Finished setting default values for core params
[ 6.013816] dwc_otg 3f980000.usb: Bad value for SNPSID: 0x00000000
[ 6.017052] dwc_otg: probe of 3f980000.usb failed with error -22
[ 6.017782] dwc_otg: FIQ enabled
[ 6.017891] dwc_otg: NAK holdoff enabled
[ 6.017990] dwc_otg: FIQ split-transaction FSM enabled
[ 6.018272] Module dwc_common_port init
[ 6.020390] usbcore: registered new interface driver usb-storage
[ 6.023779] mousedev: PS/2 mouse device common for all mice
[ 6.030208] IR NEC protocol handler initialized
[ 6.030374] IR RC5(x/sz) protocol handler initialized
[ 6.030515] IR RC6 protocol handler initialized
[ 6.030663] IR JVC protocol handler initialized
[ 6.030803] IR Sony protocol handler initialized
[ 6.030956] IR SANYO protocol handler initialized
[ 6.031102] IR Sharp protocol handler initialized
[ 6.031272] IR MCE Keyboard/mouse protocol handler initialized
[ 6.031928] IR XMP protocol handler initialized
[ 6.066115] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 6.070828] bcm2835-cpufreq: min=700000 max=700000
[ 6.079575] sdhci: Secure Digital Host Controller Interface driver
[ 6.079680] sdhci: Copyright(c) Pierre Ossman
[ 6.092767] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 6.096564] sdhci-pltfm: SDHCI platform and OF driver helper
[ 6.109846] ledtrig-cpu: registered to indicate activity on CPUs
[ 6.112669] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.114411] usbcore: registered new interface driver usbhid
[ 6.114523] usbhid: USB HID core driver
[ 6.120115] vchiq: vchiq_init_state: slot_zero = bb980000, is_master = 0
[ 6.128029] bcm2835_vchiq 3f00b840.vchiq: failed to set channelbase
[ 6.128242] vchiq: could not load vchiq
[ 6.137813] Initializing XFRM netlink socket
[ 6.138903] NET: Registered protocol family 17
[ 6.143266] Key type dns_resolver registered
[ 6.145670] Registering SWP/SWPB emulation handler
[ 6.153657] registered taskstats version 1
[ 6.271274] bcm2835-clk 3f101000.cprman: plla: couldn't lock PLL
[ 6.272377] ------------[ cut here ]------------
[ 6.273784] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 6.274049] Modules linked in:
[ 6.274991] CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.14.98-v7+ #1200
[ 6.275113] Hardware name: BCM2835
[ 6.276232] Workqueue: events deferred_probe_work_func
[ 6.278358] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 6.278621] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 6.278919] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 6.279060] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 6.279199] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 6.279344] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 6.279475] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 6.279606] [<804f6100>] (devm_clk_hw_register) from [<804fae08>] (bcm2835_register_pll+0xac/0xd4)
[ 6.279738] [<804fae08>] (bcm2835_register_pll) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 6.279872] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 6.280005] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 6.280134] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 6.280264] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 6.280390] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 6.280514] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 6.280638] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 6.280765] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 6.280896] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 6.281028] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 6.281158] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 6.281295] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 6.281677] ---[ end trace a26539f33930f302 ]---
[ 6.384223] bcm2835-clk 3f101000.cprman: pllb: couldn't lock PLL
[ 6.384329] ------------[ cut here ]------------
[ 6.384469] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 6.384542] Modules linked in:
[ 6.384859] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 6.384939] Hardware name: BCM2835
[ 6.385053] Workqueue: events deferred_probe_work_func
[ 6.385250] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 6.385389] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 6.385527] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 6.385663] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 6.385792] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 6.385930] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 6.386060] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 6.386193] [<804f6100>] (devm_clk_hw_register) from [<804fae08>] (bcm2835_register_pll+0xac/0xd4)
[ 6.386324] [<804fae08>] (bcm2835_register_pll) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 6.386456] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 6.386586] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 6.386715] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 6.386840] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 6.386977] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 6.387102] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 6.387242] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 6.387369] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 6.387510] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 6.387642] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 6.387783] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 6.387918] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 6.388022] ---[ end trace a26539f33930f303 ]---
[ 6.488957] bcm2835-clk 3f101000.cprman: pllc: couldn't lock PLL
[ 6.489058] ------------[ cut here ]------------
[ 6.489199] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 6.489272] Modules linked in:
[ 6.489423] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 6.489501] Hardware name: BCM2835
[ 6.489615] Workqueue: events deferred_probe_work_func
[ 6.489803] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 6.489942] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 6.490078] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 6.490213] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 6.490343] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 6.490477] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 6.490609] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 6.490740] [<804f6100>] (devm_clk_hw_register) from [<804fae08>] (bcm2835_register_pll+0xac/0xd4)
[ 6.490871] [<804fae08>] (bcm2835_register_pll) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 6.491003] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 6.491133] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 6.491264] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 6.491416] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 6.491608] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 6.491798] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 6.491989] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 6.492190] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 6.492388] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 6.492589] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 6.492785] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 6.492988] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 6.493128] ---[ end trace a26539f33930f304 ]---
[ 6.594159] bcm2835-clk 3f101000.cprman: plld: couldn't lock PLL
[ 6.594260] ------------[ cut here ]------------
[ 6.594396] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 6.594469] Modules linked in:
[ 6.594620] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 6.594700] Hardware name: BCM2835
[ 6.594813] Workqueue: events deferred_probe_work_func
[ 6.595002] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 6.595145] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 6.595288] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 6.595426] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 6.595559] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 6.595696] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 6.595828] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 6.595958] [<804f6100>] (devm_clk_hw_register) from [<804fae08>] (bcm2835_register_pll+0xac/0xd4)
[ 6.596093] [<804fae08>] (bcm2835_register_pll) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 6.596229] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 6.596362] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 6.596492] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 6.596618] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 6.596741] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 6.596863] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 6.596986] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 6.597111] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 6.597242] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 6.597372] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 6.597498] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 6.597634] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 6.597727] ---[ end trace a26539f33930f305 ]---
[ 6.698398] bcm2835-clk 3f101000.cprman: pllh: couldn't lock PLL
[ 6.698498] ------------[ cut here ]------------
[ 6.698635] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 6.698708] Modules linked in:
[ 6.698861] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 6.698940] Hardware name: BCM2835
[ 6.699054] Workqueue: events deferred_probe_work_func
[ 6.699244] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 6.699385] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 6.699522] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 6.699653] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 6.699782] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 6.699916] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 6.700050] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 6.700185] [<804f6100>] (devm_clk_hw_register) from [<804fae08>] (bcm2835_register_pll+0xac/0xd4)
[ 6.700318] [<804fae08>] (bcm2835_register_pll) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 6.700451] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 6.700633] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 6.700762] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 6.700895] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 6.701019] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 6.701143] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 6.701271] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 6.701430] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 6.701628] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 6.701825] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 6.702019] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 6.702228] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 6.702366] ---[ end trace a26539f33930f306 ]---
[ 6.804312] bcm2835-clk 3f101000.cprman: plla: couldn't lock PLL
[ 6.804451] ------------[ cut here ]------------
[ 6.804590] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 6.804663] Modules linked in:
[ 6.804814] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 6.804892] Hardware name: BCM2835
[ 6.805005] Workqueue: events deferred_probe_work_func
[ 6.805197] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 6.805337] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 6.805475] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 6.805613] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 6.805746] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 6.805882] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 6.806014] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 6.806143] [<804f6100>] (devm_clk_hw_register) from [<804fb1cc>] (bcm2835_register_pll_divider+0x110/0x184)
[ 6.806282] [<804fb1cc>] (bcm2835_register_pll_divider) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 6.806414] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 6.806547] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 6.806677] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 6.806802] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 6.806926] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 6.807049] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 6.807176] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 6.807303] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 6.807431] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 6.807560] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 6.807687] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 6.807823] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 6.807915] ---[ end trace a26539f33930f307 ]---
[ 6.909500] bcm2835-clk 3f101000.cprman: plla: couldn't lock PLL
[ 6.909597] ------------[ cut here ]------------
[ 6.909732] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 6.909804] Modules linked in:
[ 6.909955] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 6.910033] Hardware name: BCM2835
[ 6.910147] Workqueue: events deferred_probe_work_func
[ 6.910337] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 6.910474] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 6.910609] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 6.910743] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 6.910872] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 6.911006] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 6.911139] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 6.911273] [<804f6100>] (devm_clk_hw_register) from [<804fb1cc>] (bcm2835_register_pll_divider+0x110/0x184)
[ 6.911440] [<804fb1cc>] (bcm2835_register_pll_divider) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 6.911641] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 6.911838] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 6.912034] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 6.912231] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 6.912423] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 6.912613] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 6.912804] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 6.912999] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 6.913199] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 6.913397] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 6.913591] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 6.913795] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 6.913933] ---[ end trace a26539f33930f308 ]---
[ 7.014847] bcm2835-clk 3f101000.cprman: pllb: couldn't lock PLL
[ 7.014943] ------------[ cut here ]------------
[ 7.015077] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 7.015149] Modules linked in:
[ 7.015336] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 7.015415] Hardware name: BCM2835
[ 7.015526] Workqueue: events deferred_probe_work_func
[ 7.015712] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 7.015849] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 7.015984] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 7.016117] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 7.016251] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 7.016385] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 7.016514] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 7.016643] [<804f6100>] (devm_clk_hw_register) from [<804fb1cc>] (bcm2835_register_pll_divider+0x110/0x184)
[ 7.016772] [<804fb1cc>] (bcm2835_register_pll_divider) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 7.016902] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 7.017032] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 7.017164] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 7.017290] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 7.017414] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 7.017536] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 7.017660] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 7.017784] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 7.017911] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 7.018040] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 7.018177] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 7.018339] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 7.018431] ---[ end trace a26539f33930f309 ]---
[ 7.119239] bcm2835-clk 3f101000.cprman: pllc: couldn't lock PLL
[ 7.119336] ------------[ cut here ]------------
[ 7.119470] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 7.119542] Modules linked in:
[ 7.119694] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 7.119772] Hardware name: BCM2835
[ 7.119885] Workqueue: events deferred_probe_work_func
[ 7.120071] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 7.120214] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 7.120351] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 7.120484] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 7.120614] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 7.120750] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 7.120883] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 7.121013] [<804f6100>] (devm_clk_hw_register) from [<804fb1cc>] (bcm2835_register_pll_divider+0x110/0x184)
[ 7.121146] [<804fb1cc>] (bcm2835_register_pll_divider) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 7.121282] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 7.121454] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 7.121650] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 7.121842] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 7.122033] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 7.122227] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 7.122419] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 7.122614] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 7.122810] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 7.123007] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 7.123205] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 7.123409] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 7.123545] ---[ end trace a26539f33930f30a ]---
[ 7.224487] bcm2835-clk 3f101000.cprman: pllc: couldn't lock PLL
[ 7.224586] ------------[ cut here ]------------
[ 7.224720] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 7.224793] Modules linked in:
[ 7.224943] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 7.225021] Hardware name: BCM2835
[ 7.225133] Workqueue: events deferred_probe_work_func
[ 7.225323] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 7.225463] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 7.225601] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 7.225739] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 7.225874] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 7.226011] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 7.226143] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 7.226277] [<804f6100>] (devm_clk_hw_register) from [<804fb1cc>] (bcm2835_register_pll_divider+0x110/0x184)
[ 7.226412] [<804fb1cc>] (bcm2835_register_pll_divider) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 7.226543] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 7.226677] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 7.226807] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 7.226932] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 7.227055] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 7.227181] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 7.227305] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 7.227430] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 7.227557] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 7.227686] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 7.227812] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 7.227959] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 7.228053] ---[ end trace a26539f33930f30b ]---
[ 7.328887] bcm2835-clk 3f101000.cprman: pllc: couldn't lock PLL
[ 7.328985] ------------[ cut here ]------------
[ 7.329119] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 7.329196] Modules linked in:
[ 7.329347] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 7.329426] Hardware name: BCM2835
[ 7.329539] Workqueue: events deferred_probe_work_func
[ 7.329724] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 7.329862] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 7.329999] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 7.330130] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 7.330265] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 7.330399] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 7.330531] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 7.330662] [<804f6100>] (devm_clk_hw_register) from [<804fb1cc>] (bcm2835_register_pll_divider+0x110/0x184)
[ 7.330795] [<804fb1cc>] (bcm2835_register_pll_divider) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 7.330926] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 7.331057] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 7.331204] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 7.331329] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 7.331516] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 7.331706] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 7.331897] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 7.332094] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 7.332295] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 7.332495] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 7.332690] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 7.332893] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 7.333029] ---[ end trace a26539f33930f30c ]---
[ 7.433948] bcm2835-clk 3f101000.cprman: pllc: couldn't lock PLL
[ 7.434044] ------------[ cut here ]------------
[ 7.434183] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 7.434256] Modules linked in:
[ 7.434407] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 7.434486] Hardware name: BCM2835
[ 7.434598] Workqueue: events deferred_probe_work_func
[ 7.434785] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 7.434924] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 7.435060] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 7.435195] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 7.435325] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 7.435458] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 7.435588] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 7.435745] [<804f6100>] (devm_clk_hw_register) from [<804fb1cc>] (bcm2835_register_pll_divider+0x110/0x184)
[ 7.435874] [<804fb1cc>] (bcm2835_register_pll_divider) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 7.436004] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 7.436136] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 7.436269] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 7.436394] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 7.436518] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 7.436641] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 7.436763] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 7.436888] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 7.437015] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 7.437143] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 7.437273] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 7.437409] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 7.437501] ---[ end trace a26539f33930f30d ]---
[ 7.538196] bcm2835-clk 3f101000.cprman: plld: couldn't lock PLL
[ 7.538293] ------------[ cut here ]------------
[ 7.538430] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 7.538503] Modules linked in:
[ 7.538652] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 7.538731] Hardware name: BCM2835
[ 7.538844] Workqueue: events deferred_probe_work_func
[ 7.539028] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 7.539169] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 7.539305] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 7.539438] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 7.539569] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 7.539705] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 7.539838] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 7.539968] [<804f6100>] (devm_clk_hw_register) from [<804fb1cc>] (bcm2835_register_pll_divider+0x110/0x184)
[ 7.540100] [<804fb1cc>] (bcm2835_register_pll_divider) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 7.540237] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 7.540368] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 7.540507] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 7.540633] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 7.540768] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 7.540891] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 7.541024] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 7.541152] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 7.541284] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 7.541453] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 7.541648] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 7.541852] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 7.541989] ---[ end trace a26539f33930f30e ]---
[ 7.643076] bcm2835-clk 3f101000.cprman: plld: couldn't lock PLL
[ 7.643178] ------------[ cut here ]------------
[ 7.643313] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 7.643385] Modules linked in:
[ 7.643567] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 7.643646] Hardware name: BCM2835
[ 7.643759] Workqueue: events deferred_probe_work_func
[ 7.643945] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 7.644082] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 7.644221] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 7.644355] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 7.644485] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 7.644619] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 7.644750] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 7.644878] [<804f6100>] (devm_clk_hw_register) from [<804fb1cc>] (bcm2835_register_pll_divider+0x110/0x184)
[ 7.645012] [<804fb1cc>] (bcm2835_register_pll_divider) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 7.645144] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 7.645277] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 7.645406] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 7.645532] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 7.645655] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 7.645778] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 7.645901] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 7.646026] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 7.646153] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 7.646319] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 7.646446] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 7.646582] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 7.646674] ---[ end trace a26539f33930f30f ]---
[ 7.747681] bcm2835-clk 3f101000.cprman: pllh: couldn't lock PLL
[ 7.747778] ------------[ cut here ]------------
[ 7.747917] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 7.747990] Modules linked in:
[ 7.748141] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 7.748224] Hardware name: BCM2835
[ 7.748339] Workqueue: events deferred_probe_work_func
[ 7.748526] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 7.748664] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 7.748800] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 7.748931] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 7.749062] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 7.749250] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 7.749383] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 7.749513] [<804f6100>] (devm_clk_hw_register) from [<804fb1cc>] (bcm2835_register_pll_divider+0x110/0x184)
[ 7.749643] [<804fb1cc>] (bcm2835_register_pll_divider) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 7.749775] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 7.749907] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 7.750035] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 7.750163] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 7.750288] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 7.750411] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 7.750535] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 7.750662] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 7.750791] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 7.750920] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 7.751047] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 7.751202] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 7.751297] ---[ end trace a26539f33930f310 ]---
[ 7.853148] bcm2835-clk 3f101000.cprman: pllh: couldn't lock PLL
[ 7.853253] ------------[ cut here ]------------
[ 7.853390] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 7.853462] Modules linked in:
[ 7.853614] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 7.853692] Hardware name: BCM2835
[ 7.853805] Workqueue: events deferred_probe_work_func
[ 7.853993] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 7.854131] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 7.854287] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 7.854423] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 7.854554] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 7.854689] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 7.854821] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 7.854950] [<804f6100>] (devm_clk_hw_register) from [<804fb1cc>] (bcm2835_register_pll_divider+0x110/0x184)
[ 7.855082] [<804fb1cc>] (bcm2835_register_pll_divider) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 7.855218] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 7.855351] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 7.855479] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 7.855604] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 7.855728] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 7.855851] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 7.855974] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 7.856099] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 7.856231] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 7.856361] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 7.856523] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 7.856660] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 7.856754] ---[ end trace a26539f33930f311 ]---
[ 7.957496] bcm2835-clk 3f101000.cprman: pllh: couldn't lock PLL
[ 7.957594] ------------[ cut here ]------------
[ 7.957729] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 7.957802] Modules linked in:
[ 7.957952] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 7.958031] Hardware name: BCM2835
[ 7.958144] Workqueue: events deferred_probe_work_func
[ 7.958334] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 7.958472] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 7.958608] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 7.958741] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 7.958871] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 7.959008] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 7.959140] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 7.959274] [<804f6100>] (devm_clk_hw_register) from [<804fb1cc>] (bcm2835_register_pll_divider+0x110/0x184)
[ 7.959406] [<804fb1cc>] (bcm2835_register_pll_divider) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 7.959539] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 7.959668] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 7.959796] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 7.959921] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 7.960044] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 7.960170] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 7.960294] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 7.960422] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 7.960550] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 7.960679] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 7.960806] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 7.960942] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 7.961035] ---[ end trace a26539f33930f312 ]---
[ 8.078545] bcm2835-clk 3f101000.cprman: plla: couldn't lock PLL
[ 8.078652] ------------[ cut here ]------------
[ 8.078795] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 8.078879] Modules linked in:
[ 8.079033] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 8.079121] Hardware name: BCM2835
[ 8.079242] Workqueue: events deferred_probe_work_func
[ 8.079434] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 8.079575] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 8.079715] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 8.079863] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 8.079997] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 8.080137] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 8.080272] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 8.080403] [<804f6100>] (devm_clk_hw_register) from [<804fb1cc>] (bcm2835_register_pll_divider+0x110/0x184)
[ 8.080536] [<804fb1cc>] (bcm2835_register_pll_divider) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 8.080670] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 8.080807] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 8.080935] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 8.081060] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 8.081186] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 8.081310] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 8.081484] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 8.081678] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 8.081875] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 8.082074] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 8.082272] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 8.082473] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 8.082611] ---[ end trace a26539f33930f313 ]---
[ 8.184185] bcm2835-clk 3f101000.cprman: plla: couldn't lock PLL
[ 8.184284] ------------[ cut here ]------------
[ 8.184420] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 8.184492] Modules linked in:
[ 8.184643] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 8.184722] Hardware name: BCM2835
[ 8.184837] Workqueue: events deferred_probe_work_func
[ 8.185023] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 8.185165] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 8.185303] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 8.185436] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 8.185566] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 8.185701] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 8.185833] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 8.185962] [<804f6100>] (devm_clk_hw_register) from [<804fb1cc>] (bcm2835_register_pll_divider+0x110/0x184)
[ 8.186094] [<804fb1cc>] (bcm2835_register_pll_divider) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 8.186230] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 8.186360] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 8.186488] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 8.186612] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 8.186735] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 8.186858] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 8.186982] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 8.187108] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 8.187240] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 8.187370] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 8.187496] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 8.187632] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 8.187726] ---[ end trace a26539f33930f314 ]---
[ 8.289143] bcm2835-clk 3f101000.cprman: plld: couldn't lock PLL
[ 8.289246] ------------[ cut here ]------------
[ 8.289382] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 8.289454] Modules linked in:
[ 8.289605] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 8.289684] Hardware name: BCM2835
[ 8.289808] Workqueue: events deferred_probe_work_func
[ 8.289995] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 8.290133] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 8.290275] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 8.290406] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 8.290535] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 8.290669] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 8.290800] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 8.290929] [<804f6100>] (devm_clk_hw_register) from [<804fb1cc>] (bcm2835_register_pll_divider+0x110/0x184)
[ 8.291063] [<804fb1cc>] (bcm2835_register_pll_divider) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 8.291198] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 8.291331] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 8.291521] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 8.291714] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 8.291906] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 8.292095] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 8.292291] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 8.292485] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 8.292681] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 8.292878] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 8.293089] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 8.293325] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 8.293465] ---[ end trace a26539f33930f315 ]---
[ 8.395019] bcm2835-clk 3f101000.cprman: plld: couldn't lock PLL
[ 8.395116] ------------[ cut here ]------------
[ 8.395258] WARNING: CPU: 0 PID: 3 at drivers/clk/clk.c:653 clk_core_enable+0xb4/0x224
[ 8.395330] Modules linked in:
[ 8.395481] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 8.395559] Hardware name: BCM2835
[ 8.395673] Workqueue: events deferred_probe_work_func
[ 8.395858] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 8.395996] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 8.396133] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 8.396287] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 8.396417] [<8011de58>] (warn_slowpath_null) from [<804f3864>] (clk_core_enable+0xb4/0x224)
[ 8.396553] [<804f3864>] (clk_core_enable) from [<804f5f6c>] (clk_register+0x52c/0x650)
[ 8.396685] [<804f5f6c>] (clk_register) from [<804f6100>] (devm_clk_hw_register+0x4c/0x90)
[ 8.396814] [<804f6100>] (devm_clk_hw_register) from [<804fb1cc>] (bcm2835_register_pll_divider+0x110/0x184)
[ 8.396945] [<804fb1cc>] (bcm2835_register_pll_divider) from [<804fb548>] (bcm2835_clk_probe+0x178/0x218)
[ 8.397077] [<804fb548>] (bcm2835_clk_probe) from [<80549c28>] (platform_drv_probe+0x5c/0xc0)
[ 8.397210] [<80549c28>] (platform_drv_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 8.397339] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 8.397463] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 8.397589] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 8.397712] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 8.397837] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 8.397963] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 8.398091] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 8.398224] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 8.398351] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 8.398487] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 8.398581] ---[ end trace a26539f33930f316 ]---
[ 8.431135] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 8.434258] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[ 8.437989] ------------[ cut here ]------------
[ 8.438140] WARNING: CPU: 0 PID: 3 at drivers/tty/serial/serial_core.c:480 uart_get_baud_rate+0xf8/0x160
[ 8.438219] Modules linked in:
[ 8.438374] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.14.98-v7+ #1200
[ 8.438455] Hardware name: BCM2835
[ 8.438575] Workqueue: events deferred_probe_work_func
[ 8.438766] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 8.438906] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 8.439044] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 8.439200] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 8.439334] [<8011de58>] (warn_slowpath_null) from [<80525c30>] (uart_get_baud_rate+0xf8/0x160)
[ 8.439475] [<80525c30>] (uart_get_baud_rate) from [<805314cc>] (pl011_set_termios+0x58/0x390)
[ 8.439608] [<805314cc>] (pl011_set_termios) from [<80525f8c>] (uart_set_options+0xf0/0x124)
[ 8.439746] [<80525f8c>] (uart_set_options) from [<80b35cc0>] (pl011_console_setup+0x26c/0x274)
[ 8.440027] [<80b35cc0>] (pl011_console_setup) from [<801748c4>] (register_console+0x318/0x434)
[ 8.440178] [<801748c4>] (register_console) from [<80528c44>] (uart_add_one_port+0x498/0x4b0)
[ 8.440312] [<80528c44>] (uart_add_one_port) from [<8053279c>] (pl011_register_port+0x6c/0xd0)
[ 8.440440] [<8053279c>] (pl011_register_port) from [<80534018>] (pl011_probe+0x16c/0x188)
[ 8.440569] [<80534018>] (pl011_probe) from [<804ef700>] (amba_probe+0xe4/0x168)
[ 8.440705] [<804ef700>] (amba_probe) from [<80548208>] (driver_probe_device+0x244/0x300)
[ 8.440839] [<80548208>] (driver_probe_device) from [<80548470>] (__device_attach_driver+0xa4/0xbc)
[ 8.440965] [<80548470>] (__device_attach_driver) from [<805462f8>] (bus_for_each_drv+0x74/0xa8)
[ 8.441091] [<805462f8>] (bus_for_each_drv) from [<80547e7c>] (__device_attach+0xc0/0x120)
[ 8.441218] [<80547e7c>] (__device_attach) from [<805484a4>] (device_initial_probe+0x1c/0x20)
[ 8.441343] [<805484a4>] (device_initial_probe) from [<8054736c>] (bus_probe_device+0x94/0x9c)
[ 8.441541] [<8054736c>] (bus_probe_device) from [<80547814>] (deferred_probe_work_func+0x5c/0x154)
[ 8.441742] [<80547814>] (deferred_probe_work_func) from [<80137a40>] (process_one_work+0x158/0x454)
[ 8.441941] [<80137a40>] (process_one_work) from [<80137da0>] (worker_thread+0x64/0x5b8)
[ 8.442135] [<80137da0>] (worker_thread) from [<8013de24>] (kthread+0x13c/0x16c)
[ 8.442342] [<8013de24>] (kthread) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 8.442765] ---[ end trace a26539f33930f317 ]---
[ 8.771349] console [ttyAMA0] enabled
[ 8.789181] bcm2835_thermal 3f212000.thermal: Clock tsens running at 0 Hz is outside of the recommended range: 1.92 to 5MHz
[ 8.791918] thermal thermal_zone0: failed to read out thermal zone (-5)
[ 8.793134] bcm2835_thermal 3f212000.thermal: Not able to read trip_temp: -33
[ 8.794924] bcm2835_thermal: probe of 3f212000.thermal failed with error -33
[ 8.804668] sdhost: log_buf @ bb910000 (fb910000)
[ 8.893444] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 8.897009] of_cfs_init
[ 8.933909] of_cfs_init: OK
[ 8.959843] uart-pl011 3f201000.serial: no DMA platform data
[ 8.961311] ------------[ cut here ]------------
[ 8.962259] WARNING: CPU: 0 PID: 1 at drivers/tty/serial/serial_core.c:480 uart_get_baud_rate+0xf8/0x160
[ 8.962923] Modules linked in:
[ 8.963335] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.14.98-v7+ #1200
[ 8.963891] Hardware name: BCM2835
[ 8.964336] [<8010ff30>] (unwind_backtrace) from [<8010c174>] (show_stack+0x20/0x24)
[ 8.964949] [<8010c174>] (show_stack) from [<8078cf04>] (dump_stack+0xd4/0x118)
[ 8.965603] [<8078cf04>] (dump_stack) from [<8011dd70>] (__warn+0xf8/0x110)
[ 8.966197] [<8011dd70>] (__warn) from [<8011de58>] (warn_slowpath_null+0x30/0x38)
[ 8.966827] [<8011de58>] (warn_slowpath_null) from [<80525c30>] (uart_get_baud_rate+0xf8/0x160)
[ 8.967511] [<80525c30>] (uart_get_baud_rate) from [<805314cc>] (pl011_set_termios+0x58/0x390)
[ 8.968190] [<805314cc>] (pl011_set_termios) from [<805261fc>] (uart_change_speed+0x40/0xfc)
[ 8.968849] [<805261fc>] (uart_change_speed) from [<805299fc>] (uart_startup.part.4+0x140/0x248)
[ 8.969534] [<805299fc>] (uart_startup.part.4) from [<80529b5c>] (uart_port_activate+0x58/0x64)
[ 8.970196] [<80529b5c>] (uart_port_activate) from [<80513694>] (tty_port_open+0xa0/0xe0)
[ 8.970848] [<80513694>] (tty_port_open) from [<805281d8>] (uart_open+0x40/0x48)
[ 8.971486] [<805281d8>] (uart_open) from [<8050c3a0>] (tty_open+0xc0/0x39c)
[ 8.972259] [<8050c3a0>] (tty_open) from [<802906a8>] (chrdev_open+0xe0/0x1a0)
[ 8.973048] [<802906a8>] (chrdev_open) from [<80287ca0>] (do_dentry_open+0x200/0x328)
[ 8.973836] [<80287ca0>] (do_dentry_open) from [<80288f4c>] (vfs_open+0x5c/0x8c)
[ 8.974580] [<80288f4c>] (vfs_open) from [<8029a5bc>] (path_openat+0x2c0/0x10c0)
[ 8.975390] [<8029a5bc>] (path_openat) from [<8029c66c>] (do_filp_open+0x70/0xd4)
[ 8.976142] [<8029c66c>] (do_filp_open) from [<80289328>] (do_sys_open+0x120/0x1d0)
[ 8.976908] [<80289328>] (do_sys_open) from [<80289404>] (SyS_open+0x2c/0x30)
[ 8.977659] [<80289404>] (SyS_open) from [<80b01044>] (kernel_init_freeable+0x240/0x2bc)
[ 8.978446] [<80b01044>] (kernel_init_freeable) from [<807a1f80>] (kernel_init+0x18/0x128)
[ 8.979248] [<807a1f80>] (kernel_init) from [<801080ac>] (ret_from_fork+0x14/0x28)
[ 8.980187] ---[ end trace a26539f33930f318 ]---
[ 9.007178] mmc0: host does not support reading read-only switch, assuming write-enable
[ 9.009470] mmc0: new SDHC card at address 4567
[ 9.027521] mmcblk0: mmc0:4567 QEMU! 3.24 GiB
[ 9.061138] mmcblk0: p1 p2
[ 10.372417] EXT4-fs (mmcblk0p2): recovery complete
[ 10.377810] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 10.382678] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 10.390239] devtmpfs: mounted
[ 10.481208] Freeing unused kernel memory: 1024K
[ 11.121119] random: fast init done
[ 13.606291] systemd[1]: System time before build time, advancing clock.
[ 14.625210] NET: Registered protocol family 10
[ 14.652784] Segment Routing with IPv6
[ 14.866178] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.113586] random: systemd: uninitialized urandom read (16 bytes read)
[ 15.353272] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 15.363371] systemd[1]: Detected architecture arm.

Welcome to Raspbian GNU/Linux 9 (stretch)!

[ 15.426225] systemd[1]: Set hostname to .
[ 16.198811] random: systemd: uninitialized urandom read (16 bytes read)
[ 18.077334] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read)
[ 18.104968] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[ 18.497913] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
[ 19.206654] mmcblk0: error -5 sending stop command, original cmd response 0x900, card status 0x900
[ 19.207540] mmcblk0: error -5 transferring data, sector 6799352, nr 8, cmd response 0x900, card status 0x40000b00
[ 19.269724] mmcblk0: error -5 sending stop command, original cmd response 0x900, card status 0x900
[ 19.270392] mmcblk0: error -5 transferring data, sector 6799352, nr 8, cmd response 0x900, card status 0x40000b00
[ 19.271107] mmcblk0: retrying using single block read
[ 19.968188] urandom_read: 1 callbacks suppressed
[ 19.968865] random: systemd: uninitialized urandom read (16 bytes read)
[ 19.978268] random: systemd: uninitialized urandom read (16 bytes read)
[ 19.989867] random: systemd: uninitialized urandom read (16 bytes read)
[ 23.837974] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 23.862604] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 23.872259] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 23.880152] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 23.896184] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ 24.168827] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 24.195273] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point.
[ 24.211255] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 24.216426] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 24.229981] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Listening on Syslog Socket.
[ OK ] Created slice System Slice.
Starting Restore / save the current clock...
Starting Set the console keyboard layout...
Starting Load Kernel Modules...
Starting Create list of required st…ce nodes for the current kernel...
Mounting RPC Pipe File System...
[ OK ] Created slice system-autologin.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
Starting Journal Service...
[ OK ] Reached target Slices.
Mounting Debug File System...
[ 27.425931] i2c /dev entries driver
Mounting POSIX Message Queue File System...
[ OK ] Created slice system-systemd\x2dfsck.slice.
[ 29.990145] systemd[1]: Mounted RPC Pipe File System.
[ OK ] Mounted RPC Pipe File System.
[ 30.429745] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 30.786639] systemd[1]: Started Load Kernel Modules.
[ OK ] Started Load Kernel Modules.
[ 31.666746] systemd[1]: Started Restore / save the current clock.
[ OK ] Started Restore / save the current clock.
[ 31.766418] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ OK ] Started Create list of required sta…vice nodes for the current kernel.
[ 31.845578] systemd[1]: Mounted Debug File System.
[ OK ] Mounted Debug File System.
[ 32.260012] systemd[1]: Time has been changed
[ 32.459276] systemd[1]: Starting Create Static Device Nodes in /dev...
Starting Create Static Device Nodes in /dev...
[ 32.730740] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 33.071137] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
Mounting Configuration File System...
[ OK ] Mounted Configuration File System.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Started Journal Service.
[ OK ] Started Remount Root and Kernel File Systems.
Starting Load/Save Random Seed...
Starting Flush Journal to Persistent Storage...
Starting udev Coldplug all Devices...
[ OK ] Started Load/Save Random Seed.
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Set the console keyboard layout.
[ OK ] Reached target Local File Systems (Pre).
Starting Show Plymouth Boot Screen...
[ OK ] Started Show Plymouth Boot Screen.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Reached target Paths.
[ OK ] Started Forward Password Requests to Plymouth Directory Watch.
[ OK ] Found device /dev/ttyAMA0.
[ OK ] Found device /dev/disk/by-partuuid/cd48578f-01.
Starting File System Check on /dev/disk/by-partuuid/cd48578f-01...
[ OK ] Started File System Check Daemon to report status.
[ OK ] Started File System Check on /dev/disk/by-partuuid/cd48578f-01.
Mounting /boot...
[ OK ] Mounted /boot.
[ OK ] Reached target Local File Systems.
Starting Create Volatile Files and Directories...
Starting Tell Plymouth To Write Out Runtime Data...
Starting Raise network interfaces...
Starting Set console font and keymap...
Starting Preprocess NFS configuration...
[ OK ] Started Tell Plymouth To Write Out Runtime Data.
[ OK ] Started Preprocess NFS configuration.
[ OK ] Started Set console font and keymap.
[ OK ] Reached target NFS client services.
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
Starting Network Time Synchronization...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Initialization.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on triggerhappy.socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting rng-tools.service...
Starting dhcpcd on all interfaces...
Starting Login Service...
Starting LSB: Switch to ondemand cp…r (unless shift key is pressed)...
Starting Disable WiFi if country not set...
Starting Check for v3d driver...
[ OK ] Started Regular background program processing daemon.
Starting System Logging Service...
[ OK ] Started D-Bus System Message Bus.
Starting LSB: Autogenerate and use a swap file...
Starting Avahi mDNS/DNS-SD Stack...
Starting triggerhappy global hotkey daemon...
Starting WPA supplicant...
[ OK ] Reached target System Time Synchronized.
[ OK ] Started Daily apt download activities.
[ OK ] Started Daily apt upgrade and clean activities.
[ OK ] Reached target Timers.
[ OK ] Started System Logging Service.
[ OK ] Started rng-tools.service.
[ OK ] Started dhcpcd on all interfaces.
[ OK ] Started Disable WiFi if country not set.
[ OK ] Started Check for v3d driver.
[ OK ] Started triggerhappy global hotkey daemon.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started WPA supplicant.
[ OK ] Started Login Service.
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ TIME ] Timed out waiting for device dev-serial1.device.
[DEPEND] Dependency failed for Configure Bluetooth Modems connected by UART.
[ OK ] Started LSB: Switch to ondemand cpu…nor (unless shift key is pressed).
[ OK ] Started LSB: Autogenerate and use a swap file.
[ OK ] Started Raise network interfaces.
[ OK ] Reached target Network.
Starting /etc/rc.local Compatibility...
Starting Permit User Sessions...
[ OK ] Started /etc/rc.local Compatibility.
[ OK ] Started Permit User Sessions.
Starting Light Display Manager...
Starting Hold until boot process finishes up...
Starting Terminate Plymouth Boot Screen...

Raspbian GNU/Linux 9 raspberrypi ttyAMA0
raspberrypi login: pi
Password:raspberry
Last login: Mon Apr 8 11:32:31 BST 2019 on tty1
Linux raspberrypi 4.14.98-v7+ #1200 SMP Tue Feb 12 20:27:48 GMT 2019 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.

pi@raspberrypi:~$
pi@raspberrypi:~$
pi@raspberrypi:~$ gedit
-bash: gedit: command not found
pi@raspberrypi:~$ gnome-
gnome-menus-blacklist gnome-text-editor gnome-www-browser
pi@raspberrypi:~$ gnome-text-editor
leafpad: Cannot open display:
pi@raspberrypi:~$ ps -elf |grep X
4 S root 339 329 4 80 0 - 25938 - 11:32 tty7 00:00:10 /usr/lib/xorg/Xorg :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
4 S pi 425 406 3 80 0 - 12962 poll_s 11:33 ? 00:00:05 /usr/bin/lxsession -s LXDE-pi -e LXDE
0 R pi 505 425 15 80 0 - 31784 - 11:34 ? 00:00:19 lxpanel --profile LXDE-pi
0 R pi 507 425 11 80 0 - 20675 - 11:34 ? 00:00:13 pcmanfm --desktop --profile LXDE-pi
0 S pi 675 378 20 80 0 - 1092 pipe_w 11:36 ttyAMA0 00:00:00 grep --color=auto X
pi@raspberrypi:~$ export DISPLAY=:0
pi@raspberrypi:~$ gnome-text-editor

你可能感兴趣的:(Qemu,Linux,CrossPlatform)

android系统selinux中添加新属性property 辉色投像
1.定位/android/system/sepolicy/private/property_contexts声明属性开头：persist.charge声明属性类型：u:object_r:system_prop:s0图12.定位到android/system/sepolicy/public/domain.te删除neverallow{domain-init}default_prop:property
Linux下QT开发的动态库界面弹出操作（SDL2） 13jjyao QT类 qt 开发语言 sdl2 linux
需求：操作系统为linux，开发框架为qt，做成需带界面的qt动态库，调用方为java等非qt程序难点：调用方为java等非qt程序，也就是说调用方肯定不带QApplication::exec()，缺少了这个，QTimer等事件和QT创建的窗口将不能弹出(包括opencv也是不能弹出)；这与qt调用本身qt库是有本质的区别的思路：1.调用方缺QApplication::exec()，那么我们在接口
linux sdl windows.h,Windows下的SDL安装奔跑吧linux内核 linux sdl windows.h
首先你要下载并安装SDL开发包。如果装在C盘下，路径为C:\SDL1.2.5如果在WINDOWS下。你可以按以下步骤：1.打开VC++，点击"Tools",Options2,点击directories选项3.选择"Includefiles"增加一个新的路径。"C:\SDL1.2.5\include"4，现在选择"Libaryfiles“增加"C:\SDL1.2.5\lib"现在你可以开始编写你的第
linux中sdl的使用教程,sdl使用入门 Melissa Corvinus linux中sdl的使用教程
本文通过一个简单示例讲解SDL的基本使用流程。示例中展示一个窗口，窗口里面有个随机颜色快随机移动。当我们鼠标点击关闭按钮时间窗口关闭。基本步骤如下：1.初始化SDL并创建一个窗口。SDL_Init()初始化SDL_CreateWindow()创建窗口2.纹理渲染存储RGB和存储纹理的区别：比如一个从左到右由红色渐变到蓝色的矩形，用存储RGB的话就需要把矩形中每个点的具体颜色值存储下来；而纹理只是一
PHP环境搭建详细教程好看资源平台前端 php
PHP是一个流行的服务器端脚本语言，广泛用于Web开发。为了使PHP能够在本地或服务器上运行，我们需要搭建一个合适的PHP环境。本教程将结合最新资料，介绍在不同操作系统上搭建PHP开发环境的多种方法，包括Windows、macOS和Linux系统的安装步骤，以及本地和Docker环境的配置。1.PHP环境搭建概述PHP环境的搭建主要分为以下几类：集成开发环境：例如XAMPP、WAMP、MAMP，这
使用 FinalShell 进行远程连接（ssh 远程连接 Linux 服务器）编程经验分享开发工具服务器 ssh linux
目录前言基本使用教程新建远程连接连接主机自定义命令路由追踪前言后端开发，必然需要和服务器打交道，部署应用，排查问题，查看运行日志等等。一般服务器都是集中部署在机房中，也有一些直接是云服务器，总而言之，程序员不可能直接和服务器直接操作，一般都是通过ssh连接来登录服务器。刚接触远程连接时，使用的是XSHELL来远程连接服务器，连接上就能够操作远程服务器了，但是仅用XSHELL并没有上传下载文件的功能
libyuv之linux编译 jaronho Linux linux 运维服务器
文章目录一、下载源码二、编译源码三、注意事项1、银河麒麟系统（aarch64）（1）解决armv8-a+dotprod+i8mm指令集支持问题（2）解决armv9-a+sve2指令集支持问题一、下载源码到GitHub网站下载https://github.com/lemenkov/libyuv源码，或者用直接用git克隆到本地，如：gitclonehttps://github.com/lemenko
ARM驱动学习之5 LEDS驱动 JT灬新一嵌入式 C 底层 arm开发学习单片机
ARM驱动学习之5LEDS驱动知识点：•linuxGPIO申请函数和赋值函数–gpio_request–gpio_set_value•三星平台配置GPIO函数–s3c_gpio_cfgpin•GPIO配置输出模式的宏变量–S3C_GPIO_OUTPUT注意点：DRIVER_NAME和DEVICE_NAME匹配。实现步骤：1.加入需要的头文件：//Linux平台的gpio头文件#include//三
【华为OD技术面试真题精选 - 非技术题】 -HR面，综合面_华为od hr面一个射手座的程序媛程序员华为od 面试职场和发展
最后的话最近很多小伙伴找我要Linux学习资料，于是我翻箱倒柜，整理了一些优质资源，涵盖视频、电子书、PPT等共享给大家！资料预览给大家整理的视频资料：给大家整理的电子书资料：如果本文对你有帮助，欢迎点赞、收藏、转发给朋友，让我有持续创作的动力！网上学习资料一大堆，但如果学到的知识不成体系，遇到问题时只是浅尝辄止，不再深入研究，那么很难做到真正的技术提升。需要这份系统化的资料的朋友，可以点击这里获
简介Shell、zsh、bash zhaosuningsn Shell zsh bash shell linux bash
Shell是Linux和Unix的外壳，类似衣服，负责外界与Linux和Unix内核的交互联系。例如接收终端用户及各种应用程序的命令，把接收的命令翻译成内核能理解的语言，传递给内核，并把内核处理接收的命令的结果返回给外界，即Shell是外界和内核沟通的桥梁或大门。Linux和Unix提供了多种Shell，其中有种bash，当然还有其他好多种。Mac电脑中不但有bash，还有一个zsh，预装的，据说
Linux MariaDB使用OpenSSL安装SSL证书 Meta39 MySQL Oracle MariaDB Linux Windows ssl linux mariadb
进入到证书存放目录，批量删除.pem证书警告：确保已经进入到证书存放目录find.-typef-iname\*.pem-delete查看是否安装OpenSSLopensslversion没有则安装yuminstallopensslopenssl-devel开启SSL编辑/etc/my.cnf文件（没有的话就创建，但是要注意，在/etc/my.cnf.d/server.cnf配置了datadir的，
【从浅识到熟知Linux】Linux发展史 Jammingpro 从浅学到熟知Linux linux 运维服务器
归属专栏：从浅学到熟知Linux个人主页：Jammingpro每日努力一点点，技术变化看得见文章前言：本篇文章记录Linux发展的历史，因在介绍Linux过程中涉及的其他操作系统及人物，本文对相关内容也有所介绍。文章目录Unix发展史Linux发展史开源Linux官网企业应用情况发行版本在学习Linux前，我们可能都会问Linux从哪里来？它是如何发展的。但在介绍Linux之前，需要先介绍一下Un
linux 发展史种树的猴子内核 java 操作系统 linux 大数据
linux发展史说明此前对linux认识模糊一知半解，近期通过学习将自己对于linux的发展总结一下方便大家日后的学习。那Linux是目前一款非常火热的开源操作系统，可是linux是什么时候出现的，又是因为什么样的原因被开发出来的呢。以下将对linux的发展历程进行详细的讲解。目录一、Linux发展背景二、UINIX的诞生三、UNIX的重要分支-BSD的诞生四、Minix的诞生五、GNU与Free
Linux sh命令 fengyehongWorld Linux linux
目录一.基本语法二.选项2.1-c字符串中读取内容，并执行2.1.1基本用法2.1.2获取当前目录下失效的超链接2.2-x每个命令执行之前，将其打印出来2.3结合Here文档使用一.基本语法⏹Linux和Unix系统中用于执行shell脚本或运行命令的命令。sh[选项][脚本文件][参数...]⏹选项-c：从字符串中读取内容，并执行。-x：在每个命令执行之前，将其打印出来。-s：从标准流中读取内容
Linux vi常用命令 fengyehongWorld Linux linux
参考资料viコマンド（vimコマンド）リファレンス目录一.保存系命令二.删除系命令三.移动系命令四.复制粘贴系命令一.保存系命令⏹保存并退出:wq⏹强制保存并退出:wq!⏹退出(文件未编辑):q⏹强制退出(忽略已编辑内容):q!⏹另存为:w新文件名二.删除系命令⏹删除当前行dd⏹清空整个文档gg：移动到文档顶部dG：删除到最后一行ggdG三.移动系命令⏹移动到文档顶部gg⏹移动到文档底部#方式1G
Linux查看服务器日志 TPBoreas 运维 linux 运维
一、tail这个是我最常用的一种查看方式用法如下：tail-n10test.log查询日志尾部最后10行的日志;tail-n+10test.log查询10行之后的所有日志;tail-fn10test.log循环实时查看最后1000行记录(最常用的)一般还会配合着grep用，(实时抓包)例如:tail-fn1000test.log|grep'关键字'（动态抓包）tail-fn1000test.log
笋丁网页自动回复机器人V3.0.0免授权版源码希希分享软希网58soho_cn 源码资源笋丁网页自动回复机器人
笋丁网页机器人一款可设置自动回复，默认消息，调用自定义api接口的网页机器人。此程序后端语言使用Golang，内存占用最高不超过30MB，1H1G服务器流畅运行。仅支持Linux服务器部署，不支持虚拟主机，请悉知！使用自定义api功能需要有一定的建站基础。源码下载：https://download.csdn.net/download/m0_66047725/89754250更多资源下载：关注我。安
Linux CTF逆向入门蚁景网络安全 linux 运维 CTF
1.ELF格式我们先来看看ELF文件头，如果想详细了解，可以查看ELF的manpage文档。关于ELF更详细的说明：e_shoff：节头表的文件偏移量（字节）。如果文件没有节头表，则此成员值为零。sh_offset：表示了该section（节）离开文件头部位置的距离+-------------------+|ELFheader|---++--------->+-------------------
NPM私库搭建-verdaccio（Linux） Beam007 npm linux 前端
1、安装nodelinux服务器安装nodea)、官网下载所需的node版本https://nodejs.org/dist/v14.21.0/b)、解压安装包若下载的是xxx.tar.xz文件，解压命令为tar-xvfxxx.tar.xzc)、修改环境变量修改：/etc/profile文件#SETPATHFORNODEJSexportNODE_HOME=NODEJS解压安装的路径exportPAT
C++常见知识掌握 nfgo c++开发语言
1.Linux软件开发、调试与维护内核与系统结构Linux内核是操作系统的核心，负责管理硬件资源，提供系统服务，它是系统软件与硬件之间的桥梁。主要组成部分包括：进程管理：内核通过调度器分配CPU时间给各个进程，实现进程的创建、调度、终止等操作。使用进程描述符（task_struct）来存储进程信息，包括状态（就绪、运行、阻塞等）、优先级、内存映射等。内存管理：包括物理内存和虚拟内存管理。通过页表映
linux脚本sed替换变量,sed 命令中替换值为shell变量诺坎普之约 linux脚本sed替换变量
文章目录sed命令中替换值为shell变量替换基本语法sed中替换使用shell变量总结参考文档sed命令中替换值为shell变量替换基本语法大家都是sed有很多用法，最多就应该是替换一些值了。让我们先回忆sed的替换语法。在sed进行替换的时候sed-i's/old/new/g'1.txtecho"hellooldfrank"|sed's/old/new/g'结果如下：hellonewfrank
RK3229_Android9.0_Box 4G模块EC200A调试 suifen_ 网络
0、kernel修改这部分完全可以参考Linux的移植：RK3588EC200A-CN【4G模块】调试_rkec200a-cn-CSDN博客1、修改device/rockchip/rk322xdiff--gita/device.mkb/device.mkindexec6bfaa..e7c32d1100755---a/device.mk+++b/device.mk@@-105,6+105,8@@en
linux 安装Sublime Text 3 hhyiyuanyu Python学习 linux sublime text
方法/步骤打开官网http://www.sublimetext.com/3，选择64位进行下载执行命令wgethttps://download.sublimetext.com/sublime_text_3_build_3126_x64.tar.bz2进行下载3、下载完成进行解压,执行tar-xvvfsublime_text_3_build_3126_x64.tar.bz解压4、解压完成以后，移动到
KVM虚拟机源代码分析【转】 xidianjiapei001 #虚拟化技术
1.KVM结构及工作原理1.1KVM结构KVM基本结构有两部分组成。一个是KVMDriver，已经成为Linux内核的一个模块。负责虚拟机的创建，虚拟内存的分配，虚拟CPU寄存器的读写以及虚拟CPU的运行等。另外一个是稍微修改过的Qemu，用于模拟PC硬件的用户空间组件，提供I/O设备模型以及访问外设的途径。KVM基本结构如图1所示。其中KVM加入到标准的Linux内核中，被组织成Linux中标准
史上最全git命令,git回滚,git命令大全騒周其他 git
git命令大全一、Git整体理解二、由暂存区本地仓库三、由本地仓->远程仓库四、冲突处理五、Git分支操作六、bug的分支七、feature分支八、暂存的使用九、远程仓的操作十、标签的使用十一、Git配置全局信息十二、Linux的一些简单操作和一些符号的解释十三、符号解释十四、显示安装详细信息十五、gitconfig十六、Gitclone十七、Gitinit十八、gitstatus十九、gitre
【显示后台运行 & 的命令】晨春计 debug linux 服务器运维
目录背景步骤详解示例背景当你在Linuxshell中使用&符号将一个命令放到后台运行时，你可以使用jobs命令来查看这些后台进程的状态。但是，jobs命令并不会直接显示进程的PID（进程ID）。它会显示一个作业列表，其中包括每个作业的状态和一个作业标识符（通常是百分号%后面跟着一个数字），但不会直接显示PID。获取后台进程的PID步骤：1、使用jobs命令查看后台作业。2、使用ps命令配合grep
Android shell 常用 debug 命令晨春计 Audio debug android linux
目录1、查看版本2、am命令3、pm命令4、dumpsys命令5、sed命令6、log定位查看APK进程号7、log定位使用场景1、查看版本1.1、Android串口终端执行getpropro.build.version.release#获取Android版本uname-a#查看linux内核版本信息uname-r#单独查看内核版本1.2、linux服务器执行lsb_release-a#查看Lin
【nginx】ngx_http_proxy_connect_module 正向代理等风来不如迎风去网络服务入门与实战 nginx http 运维
50.65无法访问服务器，(403错误)50.196可以访问服务器。那么，配置65通过196访问。需要一个nginx作为代理【nginx】搭配okhttp配置反向代理发送原生的nginx是不支持okhttp的CONNECT请求的。大神竟然给出了一个java工程GINX编译ngx_http_proxy_connect_module及做正向代理是linux构建的。是windows构建的：编译Windo
linux下好用的任务管理器htop WittXie Linux linux 服务器运维
给大家推荐个好用的任务管理器htop，简直好用的不得了。完虐top。不解释了，看文章！！！在Linux系统中，top命令用来显示系统中正在运行的进程的实时状态，它显示了一些非常有用的信息，比如CPU利用情况、内存消耗情况，以及每个进程情况等。但是，你知道吗？还有另外一个命令行工具'htop'，它与传统的top命令功能一样，但它有更加强大的功能及能显示更多的信息。这篇文章，我们会用实例来讨论这个'h
Linux下使用U盘 WittXie Linux linux 运维服务器
第一步：插入U盘，如果能够识别出U盘，则会打印出一些信息；第二步：查看U盘系统分配给U盘的设备名；输入如下命令进行查看：fdisk-l/dev/sda如果打印出如下信息：Disk/dev/sda:4233MB,4233101312bytes165heads,34sectors/track,1473cylindersUnits=cylindersof5610*512=2872320bytesDevi
Algorithm 香水浓 java Algorithm
冒泡排序 public static void sort(Integer[] param) { for (int i = param.length - 1; i > 0; i--) { for (int j = 0; j < i; j++) { int current = param[j]; int next = param[j + 1];
mongoDB 复杂查询表达式开窍的石头 mongodb
1:count Pg: db.user.find().count(); 统计多少条数据 2:不等于$ne Pg: db.user.find({_id:{$ne:3}},{name:1,sex:1,_id:0}); 查询id不等于3的数据。 3：大于$gt $gte(大于等于) &n
Jboss Java heap space异常解决方法, jboss OutOfMemoryError : PermGen space 0624chenhong jvm jboss
转自 http://blog.csdn.net/zou274/article/details/5552630 解决办法： window->preferences->java->installed jres->edit jre 把default vm arguments 的参数设为-Xms64m -Xmx512m ----------------
文件上传下载解析相对路径不懂事的小屁孩文件上传
有点坑吧，弄这么一个简单的东西弄了一天多，身边还有大神指导着，网上各种百度着。下面总结一下遇到的问题：文件上传，在页面上传的时候，不要想着去操作绝对路径，浏览器会对客户端的信息进行保护，避免用户信息收到攻击。在上传图片，或者文件时，使用form表单来操作。前台通过form表单传输一个流到后台，而不是ajax传递参数到后台，代码如下: <form action=&
怎么实现qq空间批量点赞换个号韩国红果果 qq
纯粹为了好玩！！逻辑很简单 1 打开浏览器console；输入以下代码。先上添加赞的代码 var tools={}; //添加所有赞 function init(){ document.body.scrollTop=10000; setTimeout(function(){document.body.scrollTop=0;},2000);//加
判断是否为中文灵静志远中文
方法一： public class Zhidao { public static void main(String args[]) { String s = "sdf灭礌 kjl d{';\fdsjlk是"; int n=0; for(int i=0; i<s.length(); i++) { n = (int)s.charAt(i); if((
一个电话面试后总结 a-john 面试
今天，接了一个电话面试，对于还是初学者的我来说，紧张了半天。面试的问题分了层次，对于一类问题，由简到难。自己觉得回答不好的地方作了一下总结：在谈到集合类的时候，举几个常用的集合类，想都没想，直接说了list,map。然后对list和map分别举几个类型： list方面：ArrayList,LinkedList。在谈到他们的区别时，愣住了
MSSQL中Escape转义的使用 aijuans MSSQL
IF OBJECT_ID('tempdb..#ABC') is not null drop table tempdb..#ABC create table #ABC ( PATHNAME NVARCHAR(50) ) insert into #ABC SELECT N'/ABCDEFGHI' UNION ALL SELECT N'/ABCDGAFGASASSDFA' UNION ALL
一个简单的存储过程 asialee mysql 存储过程构造数据批量插入
今天要批量的生成一批测试数据，其中中间有部分数据是变化的，本来想写个程序来生成的，后来想到存储过程就可以搞定，所以随手写了一个，记录在此： DELIMITER $$ DROP PROCEDURE IF EXISTS inse
annot convert from HomeFragment_1 to Fragment 百合不是茶 android 导包错误
创建了几个类继承Fragment, 需要将创建的类存储在ArrayList<Fragment>中; 出现不能将new 出来的对象放到队列中,原因很简单; 创建类时引入包是:import android.app.Fragment; 创建队列和对象时使用的包是:import android.support.v4.ap
Weblogic10两种修改端口的方法 bijian1013 weblogic 端口号配置管理 config.xml
一.进入控制台进行修改 1.进入控制台: http://127.0.0.1:7001/console 2.展开左边树菜单域结构->环境->服务器-->点击AdminServer(管理) &
mysql 操作指令征客丶 mysql
一、连接mysql 进入 mysql 的安装目录； $ bin/mysql -p [host IP 如果是登录本地的mysql 可以不写 -p 直接 -u] -u [userName] -p 输入密码，回车，接连；二、权限操作［如果你很了解mysql数据库后，你可以直接去修改系统表，然后用 mysql> flush privileges; 指令让权限生效］ 1、赋权 mys
【Hive一】Hive入门 bit1129 hive
Hive安装与配置 Hive的运行需要依赖于Hadoop，因此需要首先安装Hadoop2.5.2，并且Hive的启动前需要首先启动Hadoop。 Hive安装和配置的步骤 1. 从如下地址下载Hive0.14.0 http://mirror.bit.edu.cn/apache/hive/ 2.解压hive，在系统变
ajax 三种提交请求的方法 BlueSkator Ajax jqery
1、ajax 提交请求 $.ajax({ type:"post", url : "${ctx}/front/Hotel/getAllHotelByAjax.do", dataType : "json", success : function(result) { try { for(v
mongodb开发环境下的搭建入门 braveCS 运维
linux下安装mongodb 1）官网下载mongodb-linux-x86_64-rhel62-3.0.4.gz 2）linux 解压 gzip -d mongodb-linux-x86_64-rhel62-3.0.4.gz; mv mongodb-linux-x86_64-rhel62-3.0.4 mongodb-linux-x86_64-rhel62-
编程之美-最短摘要的生成 bylijinnan java 数据结构算法编程之美
import java.util.HashMap; import java.util.Map; import java.util.Map.Entry; public class ShortestAbstract { /** * 编程之美最短摘要的生成 * 扫描过程始终保持一个[pBegin,pEnd]的range,初始化确保[pBegin,pEnd]的ran
json数据解析及typeof chengxuyuancsdn js typeof json解析
// json格式 var people='{"authors": [{"firstName": "AAA","lastName": "BBB"},' +' {"firstName": "CCC&
流程系统设计的层次和目标 comsci 设计模式数据结构 sql 框架脚本
流程系统设计的层次和目标
RMAN List和report 命令 daizj oracle list report rman
LIST 命令使用RMAN LIST 命令显示有关资料档案库中记录的备份集、代理副本和映像副本的信息。使用此命令可列出： • RMAN 资料档案库中状态不是AVAILABLE 的备份和副本 • 可用的且可以用于还原操作的数据文件备份和副本 • 备份集和副本，其中包含指定数据文件列表或指定表空间的备份 • 包含指定名称或范围的所有归档日志备份的备份集和副本 • 由标记、完成时间、可
二叉树:红黑树 dieslrae 二叉树
红黑树是一种自平衡的二叉树,它的查找,插入,删除操作时间复杂度皆为O(logN),不会出现普通二叉搜索树在最差情况时时间复杂度会变为O(N)的问题. 红黑树必须遵循红黑规则,规则如下 1、每个节点不是红就是黑。 2、根总是黑的 &
C语言homework3，7个小题目的代码 dcj3sjt126com c
1、打印100以内的所有奇数。 # include <stdio.h> int main(void) { int i; for (i=1; i<=100; i++) { if (i%2 != 0) printf("%d ", i); } return 0; } 2、从键盘上输入10个整数，
自定义按钮, 图片在上, 文字在下, 居中显示 dcj3sjt126com 自定义
#import <UIKit/UIKit.h> @interface MyButton : UIButton -(void)setFrame:(CGRect)frame ImageName:(NSString*)imageName Target:(id)target Action:(SEL)action Title:(NSString*)title Font:(CGFloa
MySQL查询语句练习题，测试足够用了 flyvszhb sql mysql
http://blog.sina.com.cn/s/blog_767d65530101861c.html 1.创建student和score表 CREATE TABLE student ( id INT(10) NOT NULL UNIQUE PRIMARY KEY , name VARCHAR
转：MyBatis Generator 详解 happyqing mybatis
MyBatis Generator 详解 http://blog.csdn.net/isea533/article/details/42102297 MyBatis Generator详解 http://git.oschina.net/free/Mybatis_Utils/blob/master/MybatisGeneator/MybatisGeneator.
让程序员少走弯路的14个忠告 jingjing0907 工作计划学习
无论是谁，在刚进入某个领域之时，有再大的雄心壮志也敌不过眼前的迷茫：不知道应该怎么做，不知道应该做什么。下面是一名软件开发人员所学到的经验，希望能对大家有所帮助 1.不要害怕在工作中学习。只要有电脑，就可以通过电子阅读器阅读报纸和大多数书籍。如果你只是做好自己的本职工作以及分配的任务，那是学不到很多东西的。如果你盲目地要求更多的工作，也是不可能提升自己的。放
nginx和NetScaler区别流浪鱼 nginx
NetScaler是一个完整的包含操作系统和应用交付功能的产品，Nginx并不包含操作系统，在处理连接方面，需要依赖于操作系统，所以在并发连接数方面和防DoS攻击方面，Nginx不具备优势。 2.易用性方面差别也比较大。Nginx对管理员的水平要求比较高，参数比较多，不确定性给运营带来隐患。在NetScaler常见的配置如健康检查，HA等，在Nginx上的配置的实现相对复杂。 3.策略灵活度方
第11章动画效果（下） onestopweb 动画
index.html <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/
FAQ - SAP BW BO roadmap blueoxygen BO BW
http://www.sdn.sap.com/irj/boc/business-objects-for-sap-faq Besides, I care that how to integrate tightly. By the way, for BW consultants, please just focus on Query Designer which i
关于java堆内存溢出的几种情况 tomcat_oracle java jvm jdk thread
【情况一】：　　 java.lang.OutOfMemoryError: Java heap space：这种是java堆内存不够，一个原因是真不够，另一个原因是程序中有死循环；　　如果是java堆内存不够的话，可以通过调整JVM下面的配置来解决：　　<jvm-arg>-Xms3062m</jvm-arg> 　　<jvm-arg>-Xmx
Manifest.permission_group权限组阿尔萨斯 Permission
结构继承关系 public static final class Manifest.permission_group extends Object java.lang.Object android. Manifest.permission_group 常量 ACCOUNTS 直接通过统计管理器访问管理的统计 COST_MONEY可以用来让用户花钱但不需要通过与他们直接牵涉的权限 D