WampServer添加多站点

首页安装正常的WampServer，安装成功后能够正常运行。如下图：

下面第一步就是安装第二个apache服务

一、找到Apache2的htppd.conf文件.例如:我的wamp是安装在I盘的,我的就是I:\wamp\bin\apache\apache2.2.22\conf目录下。 
二、复制httpd.conf，粘贴后在conf目录下后更名httpd2.conf(这里httpd2.conf是自定义的。)
三、用用编辑器打开httpd2.conf 找到如下几行代码 （不在一起的）

 Listen 80
 ServerName localhost:80
 DocumentRoot "i:/wamp/www/"

更改为  

 Listen 8080 //apache服务新监听的端口，可根据自己需要进行修改
 ServerName localhost:8080
 DocumentRoot "i:/wamp/www2/" //www2是我们第二个网站的目录

然后在i:/wamp下建一新文件夹为 www2 
四、接下来就是安装服务了， 
在桌面或其他地方新建个文本，贴入下面内容（注意目录）

 cd /d i:\wamp\bin\apache\apache2.2.22\bin
 httpd.exe -k install -n "www2" -f "i:\wamp\bin\apache\apache2.2.22\conf\httpd2.conf"

保存，然后将扩展后改成.bat，双击即可。
然后我们在www2下放一个html文件来做测试，在浏览器中输入 http://localhost:8080 OK。服务正常。如果此时无法访问，可能是因为服务还没启动，在windows服务中会有个我们刚刚新增的名为www2服务，如下图，启动他即可正常访问8080地址了

第二步要做的就是用wamp控制台来控制新安装的服务 

一、打开wamp目录，找到wampmanager.ini用编辑器打开

二、相关的修改

其实主要就是全部停止服务、全部启动服务、地址、目录几个配置，只要看到  Service: wampapache 之类的配置然后在下面再加行  Service: www2配置就可以了

在这里有个需要注意的就是在配置之前先前  wampmanager.tpl 改名，不然如果配置文件里的配置与  wampmanager.tpl 不相符的话会自动给覆盖掉。

下面的修改供参考：

 [Services]
 Name: wampapache
 Name: wampmysqld
 Name: www2

 [StartupAction]
 ;WAMPSTARTUPACTIONSTART
 Action: run; FileName: "i:/wamp/bin/php/php5.3.13/php-win.exe";Parameters: "refresh.php";WorkingDir: "i:/wamp/scripts"; Flags: waituntilterminated
 Action: resetservices
 Action: readconfig;
 Action: service; Service: wampapache; ServiceAction: startresume; Flags: ignoreerrors
 Action: service; Service: wampmysqld; ServiceAction: startresume; Flags: ignoreerrors
 Action: service; Service: www2; ServiceAction: startresume; Flags: ignoreerrors
 ;WAMPSTARTUPACTIONEND

 [Menu.Left]
 ;WAMPMENULEFTSTART
 Type: separator; Caption: "Powered by Alter Way"
 Type: item; Caption: "Localhost"; Action: run; FileName: "C:\Program Files\Google\Chrome\Application\chrome.exe"; Parameters: "http://localhost/"; Glyph: 5
 Type: item; Caption: "Localhost 8080"; Action: run; FileName: "C:\Program Files\Google\Chrome\Application\chrome.exe"; Parameters: "http://localhost:8080/"; Glyph: 5
 Type: item; Caption: "phpMyAdmin"; Action: run; FileName: "C:\Program Files\Google\Chrome\Application\chrome.exe"; Parameters: "http://localhost/phpmyadmin/"; Glyph: 5
 Type: item; Caption: "www directory"; Action: shellexecute; FileName: "i:/wamp/www"; Glyph: 2
 Type: item; Caption: "www2 directory"; Action: shellexecute; FileName: "i:/wamp/www2"; Glyph: 2

 [StartAll]
 ;WAMPSTARTALLSTART
 Action: service; Service: wampapache; ServiceAction: startresume; Flags: ignoreerrors
 Action: service; Service: wampmysqld; ServiceAction: startresume; Flags: ignoreerrors
 Action: service; Service: www2; ServiceAction: startresume; Flags: ignoreerrors

 [StopAll]
 ;WAMPSTOPALLSTART
 Action: service; Service: wampapache; ServiceAction: stop; Flags: ignoreerrors
 Action: service; Service: wampmysqld; ServiceAction: stop; Flags: ignoreerrors
 Action: service; Service: www2; ServiceAction: stop; Flags: ignoreerrors

 [RestartAll]
 ;WAMPRESTARTALLSTART
 Action: service; Service: wampapache; ServiceAction: stop; Flags: ignoreerrors waituntilterminated
 Action: service; Service: wampmysqld; ServiceAction: stop; Flags: ignoreerrors waituntilterminated
 Action: service; Service: www2; ServiceAction: stop; Flags: ignoreerrors waituntilterminated
 Action: service; Service: wampapache; ServiceAction: startresume; Flags: ignoreerrors waituntilterminated
 Action: service; Service: wampmysqld; ServiceAction: startresume; Flags: ignoreerrors waituntilterminated
 Action: service; Service: www2; ServiceAction: startresume; Flags: ignoreerrors waituntilterminated

 [myexit]
 ;WAMPMYEXITSTART
 Action: service; Service: wampapache; ServiceAction: stop; Flags: ignoreerrors
 Action: service; Service: wampmysqld; ServiceAction: stop; Flags: ignoreerrors
 Action: service; Service: www2; ServiceAction: stop; Flags: ignoreerrors
 Action:  exit

更改完成后保存并重启wamp就可以了。下面是我改后的效果：

可以按此方法继续添加多个站点。