**** 网线接口 ,ipmi 网口 :共用 第一个网口 或 使用iDRAC的网口,请确保网线正确,
网线接正确设置ipmi ip 后就可以ping通(局域网内的另一台机器,本机不能ping 自己的ipmi ip)
BIOS 界面设置 IPMI
重启F2进去System Setup
界面,选择iDRAC Settings
:
进入后,先配置Network
:
先后在这个页面中配置了:
如果服务器启用了idrac卡,在Nic Selection
可以看到这个Dedicated
的专用网卡,否则只能看到LOM1
,LOM2
(为Lan Of MotherBoard
的缩写)这样的配置。没有这个只是功能缩减了一点,其余的配置依然相同。
启用ipmi
后可以通过ipmitool
来进行远程管理了
配置完网络后,再配置User Configuration
,只是配置一下用户名及密码即可:
1、yum install -y OpenIPMI ipmitool 安装失败则表示该机器不支持 ipmi
systemctl enable ipmi #设置ipmi 开机启动,
systemctl start ipmi #启动 ipmi ,通过ipmitool 修改ipmi配置,最好重启下 ipmi服务
2 使用ipmitool 也可以设置ipmi 的 ip(如果是裸机,就只能在BIOS 界面设置了)
ipmitool lan set 1 ipsrc static // 设置ipsrc的类型,可以使dhcp, 也可以是static. set 1 表示 网络连接的类型,为channel1,
ipmitool lan set 1 ipaddr 10.11.1.99 //设置静态IP
ipmitool lan set 1 netmask 255.255.0.0 //必须先设置静态IP,然后再设置掩码。
ipmitool lan set 1 defgw ipaddr 10.11.1.1 // 可以不设 默认 0.0.0.0
# ipmi 的IP 和主机IP 如果设置一样,(会出现ip 冲突 ,系统自动禁止掉ipmi的ip,所有不能用ipmi 进行关机等操作了)
3、查看ipmitool lan print 1
4、重启 ipmi 服务 (systemctl restart ipmi)
4、查看能否 ping通 该ip
# 本机不能ping通 ipmi 的ip ,请局域网内的另一台机器ping
5、测试 ipmi
ipmitool -I lanplus -H x.x.x.x -U root -P password chassis power status
DELL 默认的 ipmi 用户名密码是 root/calvin, 可以在BIOS user configuration 中修改,也可以通过 ipmitool 修改
lanplus 可以替换为 lan 测试
ipmitool user list 1 # 1 是channel ID
ipmitool user set name 2 root # 2 是用户的id
ipmitool user set password 2 $newPassword
ipmitool user enable 2
ipmitool channel setaccess 1 2 callin=on ipmi=on link=on privilege=2
6 ipmitool lan print 1 # 查看1 channel 配置
[root@s100 ~]# ipmitool lan print 1
Set in Progress : Set Complete
Auth Type Support : MD5
Auth Type Enable : Callback : MD5
: User : MD5
: Operator : MD5
: Admin : MD5
: OEM :
IP Address Source : Static Address
IP Address : 192.168.11.6
Subnet Mask : 255.255.255.0
MAC Address : 44:a8:42:19:72:97
SNMP Community String : public
IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10
BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Disabled
Gratituous ARP Intrvl : 2.0 seconds
Default Gateway IP : 192.168.0.1
Default Gateway MAC : 00:00:00:00:00:00
Backup Gateway IP : 0.0.0.0
Backup Gateway MAC : 00:00:00:00:00:00
802.1q VLAN ID : Disabled
802.1q VLAN Priority : 0
RMCP+ Cipher Suites : 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14
Cipher Suite Priv Max : Xaaaaaaaaaaaaaa
: X=Cipher Suite Unused
: c=CALLBACK
: u=USER
: o=OPERATOR
: a=ADMIN
: O=OEM
Bad Password Threshold : Not Available
7、可以通过web 界面访问 DRAC 页面 https://$ipmi_IP
8.DELL 提供 win 界面的 ipmish.exe 和 ipmitool.exe (可以在官网下载)
9、ipmitool 常用命令
ipmitool user list 1 通道1用户列表 语法: list [
ipmitool user priv 2 4 1 设置权限,语法: priv
ipmitool lan set 1 access on 设置channel 1允许访问
参考链接: